How to create additional WLS_REPORTS in Weblogic Server 10.3.3

Hi,
Below is my configuration:
Oracle Weblogic Server 10.3.3.0
Oracle Fusion Middleware 11.1.1.3.0
Windows 2008 R2 - in 2 servers
I am configuring High Availability and Load Balancer on both servers. I have installed WLS_FORMS and WLS_REPORTS in the 1st server, and WLS_FORMS1 and WLS_REPORTS1 in the 2nd server. Also installed ohs, default FORMS & REPORTS servlets in both servers.
I have tested HA and LB on both server and they are working OK.
Currently, I have 3 new extra report servlets that I need to installed in the servers. Since I am working on HA and LB, the servlets need to be clustered, like the following:
1st Server=report_servlet_a1, report_servlet_b1, report_servlet_c1
2nd Server=report_servlet_a2, report_servlet_b2, report_servlet_c2
cluster_report_a=report_servlet_a1 and report_servlet_a2
cluster_report_b=report_servlet_b1 and report_servlet_b2
cluster_report_c=report_servlet_c1 and report_servlet_c2
Therefore, the new WLSs will be setup in this way:
wls_reports_a1 <-report_servlet_a1 in 1st Server
wls_reports_a2 <-report_servlet_a2 in 2nd Server
wls_reports_b1 <-report_servlet_b1 in 1st Server
wls_reports_b2 <-report_servlet_b2 in 2nd Server
wls_reports_c1 <-report_servlet_c1 in 1st Server
wls_reports_c2 <-report_servlet_c2 in 2nd Server
Kindly provide steps and/or notes how to perform the above. Thank you in advance!

One piece of advise I can give is to NOT* use the Shopping Cart fuctnionality inherent in WLP (com.beasys.commerce.ebusiness.shoppingcart. The Online Commerce functionality in WebLogic Portal has been deprecated.
Brad

Similar Messages

How to create the folder in presentation server through pop-up(

Hi Experts,
Can u give me the solution , how to create the folder in presentation server through pop-up(means dynamically, after executing the program , pop-up has to come to create the folderand path)
regards
ram.

Use the methods -> DIRECTORY_BROWSE & DIRECTORY_CREATE of the class CL_GUI_FRONTEND_SERVICES
DATA: path TYPE string,
      rc TYPE i,
dir_name TYPE string value 'HI'.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_BROWSE
    CHANGING
      SELECTED_FOLDER      = path
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate path '\' dir_name into path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>DIRECTORY_CREATE
    EXPORTING
      DIRECTORY                = path
    CHANGING
      RC                       = rc
IF SY-SUBRC <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: Kartik Tarla on Sep 23, 2009 5:54 PM

How to create a file in the server?

Hi,
I'm making a webservice that has to generate a XML file, sign it using another webservice and return this XML. The problem is that i don't know how to create the file in the server throught webservice.
I use this code in the webservice to generate the XML and after I return the XML to client in a byte[]
     static void outputDocumentToFile(Document myDocument, String path) {
        //setup this like outputDocument
          try {
               // XMLOutputter outputter = new XMLOutputter(" ", true);
               XMLOutputter outputter = new XMLOutputter();
               //output to a file
               FileWriter writer = new FileWriter(path);
               outputter.output(myDocument, writer);
               writer.close();
          } catch(java.io.IOException e) {
               e.printStackTrace();
    }But the file is generated in the client-side, how can I generate the file in the server-side?
Thanks very much.

Well the File object doesn't create a file it's simply an abstract representation of file and directory pathnames.
You can try something like this:
<%
try
// get the path to the web server root
// I read somewhere not to use 'getRealPath' for some reason which I
// can't seem to remember :S Hopefull someone can enlighten us :)
String path = application.getRealPath("/project/jsp/demo.txt");
File file = new File(path);
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter(file)));
writer.println("Hello World!");
writer.close();
catch (Exception e)
System.err.println(e.getMessage());
%>
Hope this helps :)

How to create a directory in application server

Hi all,
How to create a directory in application server through Progaram??
eg:\tmp - is already existing
I want to create \tmp\fi
Within \tmp\fi - i should able to store my file,,,
Kindly help me urgent...

Hello San,
Either contact Basis guys at ur end for the same or u can do it dynamically via a piece of ABAP code, i hope it wll help u.
call function 'GUI_CREATE_DIRECTORY'
     exporting
dirname = '//<ip_address>/qfilesvr400/<host>/usr/sap/TST/SYS/Folder1'
     exceptions
          failed = 1
          others = 2.
Reward If Helpful.
Regards
Sasidhar Reddy Matli.

How to create a database in Sql server management studio

how to create a database in Sql server management studio

One method is to run the SQL statement below from a SSMS query window:
CREATE DATABASE MyDatabase;
You can also right-click on the Databases node in SSMS Object explorer and select New Database.
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

How to create restore point in windows server 2008 service pack1

hi i am bhaskar ... how to create restore point in windows server 2008 service pack1 and how to restore system from a restore point in windows server 2008 service pack1.. is this option available or not ? what is the difference between shadow copies and
restore point ? instead of restore point we have this shadow copies option in windows server 2008 ?Bhaskar

AFIK, Restore Points doesn’t exist in Windows 2008.
Volume Shadow Copy option can be used to achieve:
Creating consistent backups of open files and applications
Creating shadow copies for shared folders
Creating transportable shadow copies using a hardware provider — for backup, testing and data mining scenarios
Quickly recovering and restoring files and data
It is more like a file, data, application backup.
Santhosh Sivarajan | MCTS, MCSE (W2K3/W2K/NT4), MCSA (W2K3/W2K/MSG), CCNA, Network+ Houston, TX
Blogs - http://blogs.sivarajan.com/
Articles - http://www.sivarajan.com/publications.html
Twitter: @santhosh_sivara - http://twitter.com/santhosh_sivara
This posting is provided AS IS with no warranties, and confers no rights.

How to increase the performance of Weblogic server 7.0?

How to increase the performance of Weblogic server 7.0 ?
also, how do i avoid typing the server login and password evertime I start the
webserver?

How to increase the performance of Weblogic server 7.0 ?It depends on what is not running fast enough for you.
also, how do i avoid typing the server login and password evertime I
start the webserver?In the startWebLogic shell script (.cmd or .sh) add:
set WLS_USER=weblogic
set WLS_PW=password
(Replace "password" with whatever your password is.)
Peace,
Cameron Purdy
Tangosol, Inc.
http://www.tangosol.com/coherence.jsp
Tangosol Coherence: Clustered Replicated Cache for Weblogic
"winston" <[email protected]> wrote in message
news:3fe42d33$[email protected]..
>

How to create a request in Development server?

Hi BW Experts, good afternoon.
   Please can anyone tell me, how to create a request in Development server.
     Thanks in advance
   Regards
Anjali

Hi Oscar ,
Thanks for the reply.
My question is.
0BATCH is a field in both R/3 and BW.
so it allows only UPPER CASE letters.
Unfortunately some records are in LOWER CASE.
So i got a error in BW side when loading data from R/3 to BW.
so i want to change that field properties .
I have to create one request on 0BATCH field and send it to BASIS team.
Give me reply .
     Thanks
              Anjali

How to create CATALOG with MS SQL Server?

Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!

You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification.

How can I configuration MBean in weblogic server using the console ?

How can I configuration MBean in weblogic server using the console ?
I hear people talking about mbeans in weblogic server I have look in the console I can not find where , or how to do it.
can some body explain that or a link that explain it, how to do it on the console ?

Hi,
Registering Custom MBeans from Admin Console is not yet possible. But yes there are ways to Configure and Utilize Custom MBeans ...
http://weblogic-wonders.com/weblogic/2010/02/16/registering-and-invoking-custommbeans/
Thanks
Jay SenSharma

Urgent help: how to create data source for Weblogic RMI driver

Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

DataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat

Urgent help: how to create data source for Weblogic T3 driver

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat

Plz help. How disable caching SQLJ statement on WebLogic server 10.3?

Plz help.
How disable caching statement by SQLJ on WebLogic server?
what the actual problem:
1. create or replace view vtest as select object_name from dba_objects where rownum<200
2. test.sqlj
  #sql dx testIterator = {
     select object_name from vtest
   int cnt=0;
   while( testIterator.next() ){
     cnt++;
   System.out.println("Count: "+cnt);
3. Restart WebLogic and deploy project
4. Run test on server, in log file
"*Count: 199*"
5. create or replace view vtest as select object_name from dba_objects where rownum<10
6. Run test on server, in log file
"*Count: 199*"
7. Restart WebLogic
8. Run test on server, in log file
"*Count: 9*"

Hi bud,
Have you tried using WLST for what you are trying to achieve?
Please take a look at the following links:
http://docs.oracle.com/cd/E11035_01/wls100/config_scripting/domains.html
http://docs.oracle.com/cd/E13222_01/wls/docs91/config_scripting/domains.html
http://docs.oracle.com/cd/E13179_01/common/docs21/interm/config.html
Hope this helps.
Thanks,
Cris

How to create rule for repoting soa server down state in OEM12c

Hi All,
I am very new to OEM 12c. I want to monitor my weblogic server from OEM 12c. I want to configure rule such that if any of the servers viz. Admin Server, soa server, bam server or osb server goes down it send a notification mail to the administrator. I am very new to OEM 12c. I have already configured the mail server in OEM12c. I need to j=know how to create a rule with the above mentioned condition. Please guide me !!!
Thanks in advance!!
Edited by: Roshni Shankar on Aug 9, 2012 12:06 AM

Hi Roshni,
For most MW targets including the WebLogic Server target, you can set the thresholds by going to the target drop-down (right above the main pane, you will see a "WebLogic Server" menu) and you can the navigate to "Monitoring" from the base menu items. From there, you will see "Metric and Collection Settings" which will take you to where you can set thresholds for the target.
You then can set notifications via your chosen mechanism. For more details, we have in-product documentation. The easiest way to find out more about thresholds, incidents, notifications, and other key features related to basic monitoring and alerting like metric templates, you can navigate to "Incident Management" off the "Enterprise" top-level menu item. There you will see incidents (i.e. metric alerts, policy violations) as well as a Getting Started guide at the bottom where you can learn more about these topics. You can also use the "Help" menu of course and look through the broader set of documentation that we offer both in the product and on OTN.
Cheers,
Glen

How to find out Sessions in weblogic server

Hi all,
i am new to weblogic and i am struck at these two questions while creating managed servers. Many people questioned me regarding this. Can you all please help me out.
1)Before adding a MS , how can we figure out the current load and what would be the impact/benefit be if we add a MS.
2)How many sessions can be handled by the unix Weblogic server?

HI,
The answer of These kind of questions can be found only after the Load Test on the WLS. Because there is no formula to calculate these things. Because these things totally depends on various different things....Like Operating System, It's RAM, CPUs, JDKs, Application type(EJB, WebServices, Portal, Simple WebApp), Number of Users, The Physical Distance of ManagedServers and DataBases....Network Conjunction...etc
So no one can tell here the exact value. But for performance diagnostics you can refer to *"René van Wijk"* best article to find out these things using small tests as described in the following Link:
Topic: Performing Diagnostics in a WebLogic environment
http://middlewaremagic.com/weblogic/?p=6016

How to create additional WLS_REPORTS in Weblogic Server 10.3.3

Similar Messages

Maybe you are looking for