How to create an array of ring with a different items/values for each
Hi All,
i want an array of text ring with different items and values for each text ring. Do you have other solution if it does not work?
thanks by advance
0utlaw wrote:
Hello Mnemo15,
The properties of elements in an array are shared across all controls or indicators in an array, so there is no way to specify unique selectable values for different text rings in an array. It sounds like what you are looking for is a cluster of ring controls, where each control can be modified independently.
Could you provide a more descriptive overview of the sort of behavior you are looking for? Are these ring elements populated at run time? Will the values be changed dynamically? Will the user interact with them directly?
Regards,
But the selection is not a property, it is a value... I just tried it and you can have different selections. Just not different items.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.
Similar Messages
-
We have two iPads connected to the MacBook with two different Midi-Sessions. Now we want to connect the every Session to a single AU-Instrument to record live but don´t get it right. In Cubase we just had to choose the Sessions as Midi-Input.
(Sorry for bad englisch )
cheersYour second post differs form your first, in the first post you said "single AU instrument", in this last post you said "separate synths". I'll address the second post.
It's a bit more difficult in Logic than Cubase which has an updated more modern MIDI system.
The iPad MIDI software will need to transmit on separate MIDI channels for each iPad.
example:
iPad #1 MIDI channel 1
iPad #2 MIDI channel 2 ...etc, doesn't matter which channels as long as they're separate.
Boot Logic:
Go to Settings/Recording and select "Auto Demix by Channel if Multitrack Recording"
Now setup your AU tracks, select separate channels in the inspector, the channels must match the transmit channels on the iPod.
You used to have to record enable the tracks, I don't believe that is necessary now. -
How to create 2D array with 3 rows and unlimit column?
how to create 2D array with 3 rows and unlimit column?
Here are images of what I described in my previous post
Message Edited by JoeLabView on 11-14-2007 07:56 AM
Attachments:
2D-array_code.PNG 7 KB
2D-array_values.PNG 13 KB -
How to create an array using reflection.
How to create an array using reflection.
I want to achive something like this,Object o;
o = (Object)(new TestClass[10]);but by use of reflection.
To create a single object is simple:Object o;
o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
Anybody knows?":-)
Ragnvald Barth
Software enigneerFound it!
the java.lang.reflect.Array class solves it!
Yes !!! -
How to create a custom function module with the records in SAP R/3?
Hi All,
How to create a custom function module with the records in SAP R/3? Using RFC Adapter I have to fetch the custom function module records.
Regards
SaraHi
goto se37...here u need to create a function group... then u need to create a function module. inside assign import/export parameters. assign tables/exceptions. activate the same. now write ur code within the function module
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm
Look at the below SAP HELP links, These links will show you the way to create a Function Module
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98fc35c111d1829f0000e829fbfe/content.htm -
How to create a dynamic table (repeating) with static header?
Hello
My purpose is to create a table which should be dynamically filled at runtime depending on the number of elements in the datasource($record.list). If the list is empty, the table shouldn't be displayed at all.
I created a subform which holds a table, ticking "Repeat Subform for each data item" and I set the binding of the table elements to $record.list[*].myelement. This works fine so far.
For the table header I created a second subform with a table having exactly the same size like the other table with text fields that contain the table header texts.
My problem now is that I would like to control the display of the subform which serves as table header row depending on whether $record.list is empty or not.
What's the best way to do this? How can I have access to the datasource for a form?
Thank you very much for your help!!!
Best regards
Bettina HeppHi,
Instead of creating the header row outside the table.
Create it inside the same table as header row.
So when you create a condition then automatically applicable for the header row also.
This is the best option.
Regards,
sasi -
How to create Using Formatted Text Field with multiple Sliders?
Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
// constructor
label1 = new JLabel( "Individuals" );
scroller1 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 10 );
scroller1.setMajorTickSpacing( 10 );
scroller1.setMinorTickSpacing( 1 );
scroller1.setPaintTicks( true );
scroller1.setPaintLabels( true );
scroller1.addChangeListener(this);
java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
NumberFormatter formatter = new NumberFormatter(numberFormat);
formatter.setMinimum(new Integer(0));
formatter.setMaximum(new Integer(100));
textField1 = new JFormattedTextField(formatter);
textField1.setValue(new Integer(10)); //FPS_INIT
textField1.setColumns(1); //get some space
textField1.addPropertyChangeListener(this);
//React when the user presses Enter.
textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField1.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
label2 = new JLabel( "Precision" );
scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
scroller2.setMajorTickSpacing( 10 );
scroller2.setMinorTickSpacing( 1 );
scroller2.setPaintTicks( true );
scroller2.setPaintLabels( true );
scroller2.addChangeListener(this);
textField2 = new JFormattedTextField(formatter);
textField2.setValue(new Integer(10)); //FPS_INIT
textField2.setColumns(1); //get some space
textField2.addPropertyChangeListener(this);
//React when the user presses Enter.
textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
textField2.getActionMap().put("check", new AbstractAction() {
public void actionPerformed(ActionEvent e) {
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
// State Changed
public void stateChanged(ChangeEvent e) {
JSlider source = (JSlider)e.getSource();
int fps = (int)source.getValue();
if (!source.getValueIsAdjusting()) { //done adjusting
if(source==scroller1) {
System.out.println("source ==scoller1\n");
textField1.setValue(new Integer(fps)); //update ftf value
else if(source==scroller2) {
System.out.println("source ==scoller2\n");
textField2.setValue(new Integer(fps)); //update ftf value
} else { //value is adjusting; just set the text
if(source==scroller1) textField1.setText(String.valueOf(fps));
else if(source==scroller2) textField2.setText(String.valueOf(fps));
// Property Change
public void propertyChange(PropertyChangeEvent e) {
if ("value".equals(e.getPropertyName())) {
Number value = (Number)e.getNewValue();
if (scroller1 != null && value != null) {
scroller1.setValue(value.intValue());
else if (scroller2 != null && value != null) {
scroller2.setValue(value.intValue());
// ACTION PERFORMED
public void actionPerformed(ActionEvent event) {
if (!textField1.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField1.selectAll();
} else try { //The text is valid,
textField1.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
if (!textField2.isEditValid()) { //The text is invalid.
Toolkit.getDefaultToolkit().beep();
textField2.selectAll();
} else try { //The text is valid,
textField2.commitEdit(); //so use it.
} catch (java.text.ParseException exc) { }
...if :p3_note_id is null
then
insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
Another option is that you have a trigger on table NOTES that generates a new note_id even for an update. -
How to Create an Input Schedule Comparison with Data Using EVDRE
Hello,
I try implement the scenario described in "How to Create an Input Schedule Comparison with Data Using EVDRE".
Once I am using the "Insert Function" from the panel and selecting the EVTIM function Excel crashes (see page 8 How to paper).
Systems:
BPC 7.0 NW SP02
Office 2007
BPCADminClient and BPCOfficeClient up to date
Have anyone a solution?
Thanks
OktayHi Oktay -
This function works in my BPC70NW SP02 system. Your issue might be that you are trying to access a TIME member that does not exist. Please make sure the offset value is a valid dimension member.
I can confirm that EVTIM does allow the offset for base members (such as 2009.MAY) as well as parent nodes (such as 2009.Q1 or 2008.TOTAL)... BUT...the offset result of the EVTIM function needs to be a valid dimension member!
Regards,
Sheldon -
How to create an array of linklists??? ... plz
Hi guys,
I am trying to create a Hash table. My link list is already working. But i am still confused about how to create any array linklist for solving the collisions. Do i need to create a new instance of the linklist for each array slot? What is the better way to do?
just need some hint to start it.
abdulYes, you need to create a new instace for each slot.
LinkedList[] ht = new LinkedList[size];
for(int x = 0; x < size; x++)
ht[x] = new LinkedList(); -
How to create an array variable
Hi folks,
I'm developing a flowN activity , for each branch created, I need to pass different values (values I get from DB).
For this my plan would be,
-create an array variable , load all the values(from DB) into the array
-pass the array to each branch in flowN activity based on the index
As I'm newbie to BPEL, I do not know how to create an array variable.
Could you people guide me please.
Regards
VikiHi,
I created my string array like
<element name="string_array">
<complexType>
<sequence>
<element name="input" type="string" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</element>
<variable name="arr" element="client:string_array"/>
I am able to add values to my array variable named as "arr"
When I use the following code snippet, it gives my the value of the entire list.
<%ora:getNodeValue(bpws:getVariableData('arr'))%>
But when I try retireve values one by one like <%ora:getElement('arr','/client:string_array/client:input',[0])%>, its giving me error.
Guide to get throu' this.
Viki -
How to create user editable Crystal Report with dynamic dataset
What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?
-
How to create new view without interlinking with gantt chart or resource views
ok clear
one another question
In msp how to create new view without interlinking with gantt chart or resource viewsHi Shiv PMC--
I splitted your question above in another thread in order not to have a huge thread with many topics in it.
That being said, I'm not sure to understand. A view is just a manner to display MS Project data with columns. A view can have a table with column (left part) associated with a Gantt chart. It can also just contain a table with no Gantt chart (like the task
table) or a table with a timephased grid (resource and task usage).
Please give us more information, maybe with a concrete example so we can help you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller | -
How to create labeled table of Content with expand and collapse
Hi All,
Can somebody help me how to create labeled table of Content with expand and collapse as example given below:
User1
Template1
Template2
User2
+
User3
Template1
Template2
Like when we see expand (+) and collapse (-) button when we click on 'about this page' link.
Thanks
BhupendraHi,
Tou can use Table inside table to show the details this way but I'm not sure about Expand/Collapse.
Expand/Collapse are part of HGRID.
I think we can develop this functionality with little manipulation.
Regards,
Reetesh Sharma
Edited by: Reetesh Sharma on Jun 28, 2010 4:56 AM -
How to create a photo album in PPT- I use MS'2012 for MAC
how to create a photo album in PPT- I use MS'2012 for MAC
Hello pager7243,
Thank you for using Apple Support Communities.
The following explains how to set up an album on your iPhone with iOS 8.
iPhone User Guide For iOS 8 Software
Look at Chapter 11: Photos, Organize your photos and videos
Regards,
Jeff D. -
How do I update my ipod touch with my new email address for my itunes account?
How do I update my ipod touch with my new email address for my itunes account? I recently changed my email address and updated it on my itunes account but now my ipod keeps asking me for the password associated with my old email address.
I did this and I still get a error message about either the
password or the email account is incorrect!
Maybe you are looking for
-
My Flash Player is "out-of-process." How can I fix this.
Good Morning, I have the latest version of Flash Player and am running it in Google Chrome. Have been trying to play Facebook games but they do not function properly. I have tried several times to delete the data but this does not help. However when
-
Since upgrading to mountain lion I cannot play DVDs
As the title. The computer is an iMac 10.1 21"
-
Bind to Reports Server localhost failed
Hi: I am using Oracle 10g(1.2.0.2) on winxp professional. I successfully deployed my war using Oracle Enterprise Manager. but when i try to run the application on browser using link http://your_computer_name:port/MyReportApp/JSPreportname.jsp?userid=
-
APACHE HTTP SERVER STOP RUNNING
TESTING ON WIN 2000 After installing IAS 9 PORTAL AND HTTP SERVER ON WIN 2000 INSTALLATION COMPLETE OK HTTP SERVER APACHE START OK BUT CRASHES AFTER A FEW SECONDS WITH ERROR MESSAGE ON WINDOWS SERVICES 'System Error 1607' DID SOMEONE FOUND THE SAME M
-
Hi, we are using SAP Netweaver 7.0 trial server in our office. some clients are accessing that server using SAP GUI710, at thae time using Web Dynpro Display layout there are recieving Page Expried page,because the function takes palce from localhos