How to create an Auto Pop Up Window on homepage

Hi, I am trying to create a pop up window in dreamweaver that loads when a first time visitor is on our homepage asking them to join our club. I would like to add a couple links in the image allowing them to either sign up or click no thanks. Can you help me out or direct me to a good tutorial? Thanks!

I have not tried the "alert-box technique" yet.
I have found code that will only display for first time visitors. How would I add an image to the below code with a link to a website?
newwin=open("yourpage.htm", "dispwin",
"width=350,height=350,scrollbars=no,menubar=no");

Similar Messages

How to create an Interactive pop out window in inDesign CS 5?

Happy New Year everyone.
How do I create an interactive pop-out window in inDesign CS5? I want to have a filled content frame which has image, text and a border. when the user clicks on that frame, a pop-out window frame appears slightly over the previous frame in with a drop shadow fx. Then when the user clicks the pop-out window, it closes and the original content frame appears. Attached is a screenshot for reference.

For what end product? HTML? SWF? PDF? Offset print? (I don't think so, but I might as well ask.)

How to create one time pop-up window?

I'd like to have a pop-up window called "how to use this app" show up just one time; the first time a user opens the folio to read it for instruction but then not appear again after it is closed. How could I do this? Thanks.

I have not tried the "alert-box technique" yet.
I have found code that will only display for first time visitors. How would I add an image to the below code with a link to a website?
newwin=open("yourpage.htm", "dispwin",
"width=350,height=350,scrollbars=no,menubar=no");

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear. You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location. THANK YOU!!!!!!

Have you tried Word for Mac?
You will need to test if links survive export or printing to .pdf
Peter

How to stop showing the pop-up window to change password

Hi,
How to stop showing the pop-up windows of changing password if the password is expired in dba_users table. This is related to form6.
Pls advice.
Thanks
Raj

Raj,
Please do not start a new thread with the same problem. If you still need help, respond to your former thread, and we will still try to help you. But you haven't provided an answer to why you can't trap the error.
Re: Trapping of error ora-28001, user expired in daa_users table

How to create own customized screensaver on Windows 7 Embedded Standard sp1

Hi Support,
How to create own customized screensaver on Windows 7 Embedded Standard sp1 OS.
Regards
YASH PAL SINGH

This forum is for POSReady. wES7 forum can be found here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=quebecmisc
Create the screen saver in Windows 7 first and then put the file in the distribution share to be included in the image. There are tools that can help create a custom screen saver:
http://download.cnet.com/windows/screensaver-editors-and-tools
www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

How to Create Roaming Profile(s) For Windows Workgroups

This Tutorial Shows how to create roaming profile(s) for Windows Workgroups.
Here are the steps in order to do this:
On the host PC:
1. Goto 'Folder Options'>'View' and un-tick 'Use Simple File Sharing'.
2. Goto Network Connections and right click on the 'Local Area Connection' (Ethernet recommended)
3. Goto Properties>General, and tick 'File and Printer Sharing'.
Click Apply + Ok.
4. Goto Control Panel>User Accounts, add a new user.
5. Logon to this user, and open the profile folder properties.
5b. Share this folder.
6. Make the Share permissions so that 'everyone' has: Full Control, Read, Change.
Click Apply + Ok.
7. Click on 'Caching' and disable Caching for this Share.
Click Ok.
8. Now goto the 'Security' tab and give 'Administrator' and 'SYSTEM' 'Full Control'.
Click Apply + Ok.
On the remote PC(s):
1. Make the same User as on the Host.
1b.Logon to the account and log back out again. Delete the profile folder from 'Documents and Settings'.
3. Give 'SYSTEM': 'Read','Read and Execute','List Folder Contents' to the 'Administrators' Profile
4. Type 'lusrmgr.msc' into run, goto: 'Users', double click on the new user and goto the 'Profile' tab.
4b. In the 'Profile Path' box, type \\hostPCname\ProfileName.
Click Apply + Ok
*Note* Replace the \\path\ accordingly to what names are on your Host PC.
5. Goto regedit>HKLM\Software\Microsoft\Windows NT\CurrentVersion. Double click
on 'ProfileList'.
Find which key is for the new user. (Example S-1-5-21-58435627-18431725-18026167-1003)
6. Right click that key and goto: 'Permissions' and give 'SYSTEM' 'read'.
*Note* Once you logon to the roaming profile from the remote PC for the first time you can undo this step.
7. goto GPEdit>Computer Configuration/Administrative Templates/System/User Profiles:
Enable these settings:
'Do not check for user ownership of roaming profile folders'
'Delete cached copies of roaming profiles'
'Log users off when roaming profile fails'
"Add the Administrators security group to roaming profiles'
'Prevent roaming profile changes from propagating to the server'
7b. Make 'Timeout for dialog boxes' '1' (seconds)
8. goto: Computer Configuration/Security Settings/Local Policies/Security Options:
Make 'Number of previous logons to cache (if server is unavailable) '0'
Now you're ready to login to the Profile on the remote PC.
*Note* Sometimes, when windows loads it takes a minute for the profile folder to become shared again.
Thanks for reading.

Hi,
I have replied to the below thread mentioning the FM's to create Profile sets, profiles and also target groups. This may be helpful to you.
Re: target group creation
Regards,
Priyanka

How to Fill Text in Pop UP Window

Hi Friends,
My Requirement is to display Purchase Requisition Header text in POP UP Window in SRM , i used RFC_READ_TEXT function module , data is coming into internal table, but not able to fill the text in POP up Window, its giving DUMP, Cn any please help me
Thnx
Kumar Srini
my Code :
DATA lo_nd_header TYPE REF TO if_wd_context_node.
DATA lo_el_header TYPE REF TO if_wd_context_element.
DATA ls_header TYPE wd_this->element_header.
*   navigate from <CONTEXT> to <HEADER> via lead selection
lo_nd_header = wd_context->get_child_node( name = wd_this->wdctx_header ).
DATA : lt_rel TYPE TABLE OF bbp_pds_hrel,
         ls_rel TYPE bbp_pds_hrel.
DATA : ls_guid TYPE crmd_orderadm_h-guid.
DATA : doc_no TYPE be_object_id.
DATA lo_COMPONENTCONTROLLER   TYPE REF TO     IG_COMPONENTCONTROLLER .
TYPES: BEGIN OF ty_ibiptextln,
           mandt      TYPE mandt,
           tdobject   TYPE tdobject,
           tdname     TYPE tdobname,
           tdid       TYPE tdid,
           tdspras    TYPE tdspras,
           counter(3) TYPE n,
           tdformat   TYPE tdformat,
           tdline     TYPE tdline,
          END OF ty_ibiptextln.
DATA: lt_ibiptextln TYPE TABLE OF ty_ibiptextln,
        ls_ibiptextln TYPE          ty_ibiptextln.
DATA : LV_TEXT TYPE STRING,
         LV_DOC_TEXT TYPE STRING.
* *****> DATA DECLARATION FOR CALLING POPUP WINDOW
data lo_window_manager type ref to if_wd_window_manager.
data lo_api_component type ref to if_wd_component.
* data lo_window         type ref to if_wd_window.
*   @TODO handle non existant child
*   IF lo_nd_header IS INITIAL.
*   ENDIF.
*   get element via lead selection
lo_el_header = lo_nd_header->get_element( ).
*   @TODO handle not set lead selection
IF lo_el_header IS INITIAL.
ENDIF.
*   get all declared attributes
lo_el_header->get_static_attributes(
    IMPORTING
      static_attributes = ls_header ).
ls_guid = ls_header-guid.
CALL FUNCTION 'BBP_PD_SC_GETDETAIL'
    EXPORTING
      i_guid       = ls_guid
    TABLES
      e_header_rel = lt_rel.
LOOP AT lt_rel INTO ls_rel.
    IF ls_rel-objid_a IS NOT INITIAL.
      doc_no = ls_rel-objid_a.
    ENDIF.
ENDLOOP.
IF doc_no IS NOT INITIAL.
    ls_ibiptextln-mandt     = ''.
    ls_ibiptextln-tdobject = 'EBANH'.
    ls_ibiptextln-tdname    = doc_no.
    ls_ibiptextln-tdid      = 'B01'.
    ls_ibiptextln-tdspras   = sy-langu.
    APPEND ls_ibiptextln TO lt_ibiptextln.
    CALL FUNCTION 'RFC_READ_TEXT' DESTINATION 'TD1CLNT400'
      TABLES
        TEXT_LINES = lt_ibiptextln.
ENDIF.
* ****> Get Refrence of Component Controller .
lo_COMPONENTCONTROLLER =   wd_this->get_componentcontroller_ctr( ).
IF lt_ibiptextln IS NOT INITIAL.
    LOOP AT lt_ibiptextln INTO lS_ibiptextln where tdline is NOT INITIAL.
         lv_text = lS_ibiptextln-TDLINE.
         CONCATENATE LV_DOC_TEXT lv_text INTO LV_DOC_TEXT SEPARATED BY space .     " CONCATANATION OF THE PRODUCT DESCRIPTION
    ENDLOOP.
* ************* CALLING METHOD OF COMPONENT CONTROLLER
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller =   wd_this->get_componentcontroller_ctr( ).
lo_componentcontroller->fill_doc_text(
    lt_doc_text = lv_text                     " string
DATA lo_window         TYPE REF TO if_wd_window.
"_*AT THIS POINT I AM GETTING SHORT DUMP_*
lo_window         = lo_window_manager->create_window(
                   window_name            = 'ZSRM_WIN'
                   title                  = 'Text Description'
                   message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                   button_kind            = if_wd_window=>co_buttons_close
                   message_type           = if_wd_window=>co_msg_type_none
                   default_button         = if_wd_window=>co_button_close
else.
    lo_componentcontroller->fill_doc_text(
    lt_doc_text = 'THERE IS NO TEXT FOR THIS Document Number' ).
lo_window         = lo_window_manager->create_window(
                   window_name            = 'ZSRM_WIN'
                   title                  = 'Text Description'
                   message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                   button_kind            = if_wd_window=>co_buttons_close
                   message_type           = if_wd_window=>co_msg_type_none
                   default_button         = if_wd_window=>co_button_close
endif.
lo_window->open( ).

You haven't created lo_window_manager
you are missing the following two lines of code:
lo_api_component = wd_this->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
Put them just before you get your dump.
Good luck!

How to Create a Auto Generated number with some preceding text in Sharepoint 2010

I am trying to create a auto generated number field in Sharepoint 2010 list item. My requirement is to have the following format number generated when new request is created in Sharepoint using form. Auto generated Ticket ID should be in the following format
"IR13000" "IR13001" "IR13002"....... Please let me know how to get this done. I tried to use combination of default ID and Characters but its not working for new requests, its only reflecting for existing uploaded requests. I
am trying this for taking up Ticket requests by filling up some fields in the form. Any quick help is much appreciated.
Thanx

Here are the steps:
1 - Open your SharePoint site in SP Designer 2010.
2 - Click Workflows and add a List workflow. Associate this workflow on the list where you want the Random Text to be generated.
3 - Inside the workflow editor, select the Action "Update list item"
4 - Select 'Current Item'.
5 - Click Add.. and select the field which needs to be updated with the Random Text. Make sure this column is not of type "Calculated" type, otherwise you won't see it in the list of the fields within the workflow.
6 - Click "..." button in the next textbox which will open String Builder dialog box.
7 - Type IR and then click 'Add or Change Lookup and select ID column from "Field from source". Hit OK.
8 - It should look like IR[%Current Item:ID%]
9 - Hit OK.
10 - Save and publish the workflow. (Please note that currently this workflow is not set to auto run on creating new items. That's because we want to test it at this point of time).
11 - Go to your list in SharePoint and create a new item. After creating, select the item and click Workflows and then run this workflow.
12 - You should be able to see the text "IR1" in the designated column.
13 - Once you see that it's working, go to SPD and set the workflow to run automatically on creation of the new item. Save and publish and then return to your list in SharePoint.
14 - Create a new item there and you should see the Random value in the column.
15 - You will also see the column in the New form. In order to remove it, go to List settings > content types > Item content type > and select Hidden for this column so that it doesn't showup in any form.
Try it and let me know how it goes.
Thanks,
Ashish

How do I stop the pop-up window in Facebook that asks "Are you sure you want to navigate away from this page"

It recently started to ask this every time I do anything on Facebook.

Yes, this pop-up window in facebook is getting extremely annoying and most times after clicking on Ok, it will take me to a page totally opposite to where I wanted to go.
When I chat on the Scrabble Discussion Board I have to click Ok constantly with each post even though I am not navigating away from that page but merely replying to a post on the same original page.
It is not present on Chrome or IE 8, just on firefox, why?
Please remove, fix, or tell me how to disable this totally useless pop-up.

How can i avoid a pop-up window when calling the avi.dll?

Ok, here another try!
My problem is as followed:
My program calls the avi.dll to initialize, write into and close an
avi-file.
Now, when initializing it, a pop-up window is shown so you can choose the
codec to use.
My question is, can I pre-define the codec, so the pop-up window won't show
up?
The program is meant to write several files, some starting without the user
having to control them, so the pop-up window really isn't helping.
Any ideas?
I attached the avi.dll in case you need it to look at the problem.
Also helpful would be, if someone could tell me, how I can take a closer
look at the structure of the dll. Is there a program I can do that with?
Thanx!
regar
ds,
Martin

Hello Martin,
I have used this DLL before and wasn't asked to choose a codec. Maybe if you use all three functions (init, write, close), it works without problems. Here's a example that uses IMAQ hardware to acquire an 8-bit image at 30fps and writes each image to an avi file.
There are utilities to examine dlls (see what functions are exported and what the dependencies are, but you can't see source code since it is compiles.) Check out QuickView or DependencyWalker.
Attachments:
avigrab.zip ‏66 KB

How to stop annoying auto scrolling in window

I'm running 10.8.5. Since upgrading to 10.8.5 from 10.6.x, my system has been doing two VERY annoying things.
1. Within a window, if I have a file selected (highlighted), say at the bottom of the window. Then I scroll all the way to the top (not selecting any other file), and the selected file is off screen (can't see it). I would then copy a file from another window to the first window (the file being copied starts with "A" so it should show up where I scrolled to at the top in the first window), once it's finished copying over, the window will automatically scroll down to the file I had selected earlier. Without fail. This actually happens with any other activity being done on my system. Window ALWAYS scroll to the highlighted file where ever you are in the window. This has never happened with 10.6.x or earlier OS X.
2. This one seems to happen randomly. Whenever I select a file to change it's name (doing a single click on the name bar), instead of the file I hit being editable, 10.8.5 would select a random file down the list instead. Making THAT file editable.
Anyone else experience these? Is there a fix, or an option somewhere to turn these ridiculous features off?
I really don't know what Apple is doing these days. But it certainly is no longer the user friendly and reliable system I've used for over 20 years. It's all about glitz and glam, no real functionality for old school power users. Instead of being a unique system like it used to be, it's now just a glorified version of PC. Just costs a lot more.

virajx3006 wrote:
Hey guys,
Anyone know how to stop the auto updater in N900 application manager ?
Coz when i connect via wifi or 3G, it always try to search for updates...Coz of that i cant search the web properly until its over.
Specially when i connect via GPRS, i have to pay more for this extra mega bites use from app manager...
So got any ideas for this prob...?
(I usually use faster app manager to install apps.)
dude check your inbox
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

How to get ride of pop up window that freezes browser

Sometimes I get these pop up windows that freezes the browser I don't want to click on the buttons so I have to force quit to close Safari. The last one i had even showed up after I reopened Safari. How can I avoid/get rid of these pop ups?

lab_rat wrote:
I am using the Block Pop Windows but it doesn't alway work as I do get the occasional little pop up window that I don't want to click on that freezes Safari. My only option has been to force quit Safari.
As we still have no magic crystal balls to see on your problem, it will be very nice if you have some more information about "that window" .
Eventually post a screenshot here.

How to create a verification pop-up message for queries executed on Web

I have implemented the function RRMS_MESSAGE_HANDLING in my customer exit variable code for step 2 in the customer include ZXRSRU01. I am able to get warning and error messages to appear in Bex Excel queries, but not queries executed on the Web. I have also tried implementing these queries in a Web Template which allows system messages and warning messages, but still these messages are suppressed.
Is anyone aware of how to create warning messages that appear both in Bex Excel and Bex Web queries?
Thanks for you help,
Curt Timmerman

On the Comments screen, just select the notes tool to add the note. When you are done, click to close the note.

How to create a VPN client for Windows Phone 8.1?

We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?

The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

How to create an Auto Pop Up Window on homepage

Similar Messages

Maybe you are looking for