How to create an in-doubt transaction?

I need to create/force an MSDTC in-doubt distributed transaction to verify that they are resolved automatically. The code successfully participates in the transaction via OraMTSSvcGet and OraMTSSvcEnlist and works as expected. I have tried creating in-doubt transactions via constraint violations, table locking, killing the application, killing the Oracle session, etc. but can't force an error between the first and second phase of the commit( which I think is the trick). Any ideas?
Message was edited by:
jgbell

If your site is dynamically populated with content from server-side databases, it's not hard.
If your site is static, a 3rd party search function might be a better choice until you're ready to build a dynamic site.
Zoom search engine
http://www.wrensoft.com/zoom/
Freefind
http://www.freefind.com/
Setting up a PHP environment in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
Building your first dynamic website – Part 1: Setting up your site and database connection
http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media  Specialists 
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

  • How to created exit for CS02 transaction to maintain bom details of a mater

    hi ,
         plz explain how to created exit for CS02 transaction to maintain BOM details of a material. what is the BOM component . give me sample example.

    Hi,
    these are the user-exits for CS02
    Transaction Code - CS02                     Change Material BOM
    Exit Name           Description
    PCSD0001            Applications development R/3 BOMS
    PCSD0002            BOMs: Customer fields in item
    PCSD0003            BOMs: Customer fields in header
    PCSD0004            BOM comparison
    PCSD0005            BOMs: component check for material items
    PCSD0006            Mass changes user exit
    PCSD0007            Check changes in STKO
    PCSD0008            WBS BOM: Customer-specific explosion for creating
    PCSD0009            Order/WBS BOM, determine URL page
    PCSD0010            Order/WBS BOM, determine explosion date
    PCSD0011            Knowledge-based order BOM, parallel update
    PCSD0012            Customer - Mat. number/mat. number during material exchange
    PCSD0013            Customer-specific processing of an explosion for BOM browser
    Regards
    Nilesh

  • How to create or modify RF transaction

    Dear all,
    Can anyone pls provide me some Sample RF Programming Codes ? normally what are the steps of the customize development for the RF ?
    thanks advance!

    Hi Edgar,
    Look at this Link, there is an explanation about how create an Screen Exit for RF transactions:
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/e7/702ea50cf411d3b4af006094b9b121/frameset.htm
    hope this help you.
    Regards,
    Alejandro

  • How to create LSMW for a transaction having scroll bar

    Hi all,
    I am trying to create an LSMW for MP)! transaction for Uploading AMPL (Approved Manufacturer Parts list data) data.
    For this LSMW is not working fine when i need to upload more number of records. Suggest me some way to solve it out,Also provide me some code samples and process if it can be handled with BDC.
    Thanks,
    Pavan.

    you can solve it with bdc:
    e.g. a table control contains only 10 entries , you've to program the dynpro-change ( in german "Bildwechsel")
    with sth like this:
    ERG = BUZEI MOD 10 .
      IF ERG = 1.
    Dynpro darf nur alle 10 Zeilen prozessiert werden -
        PERFORM BDC_DYNPRO USING 'SAPMF10B' '0150'.             "ins
      ENDIF.
    add 1 to buzei.
    A.

  • How to create User Exit for transaction MB25?

    Hello all,
    I need to add couple of columns to the report generated by transactions MB25 and LP21.
    1) Are there existing user exits which could give me this possibility?
    2) If not, how do I insert or write a user exit to do so?
    Thank you for your prompt reply.
    Ardavan

    Hi,
    check the BADI <b>MB_MIGO_BADI</b> ( method: POST_DOCUMENT).
    COMD enhancment <b>MBCF0005</b>
    Regards

  • How to create transport request with Transaction Code

    hi,
    i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code.
    Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go to this path*UTILITIES -> VERSION MANAGEMENT -> *  it shows me the request which i have transport it.So i want to make a new request with Transaction Code included in that request.Kindly guide me where i can make this request.
    Thanks.

    hi,
    Goto se93 give your tcode and press chagne,after entering into it make some change and click on save, it wil ask for TR. Save it and export it to quality.
    Regards
    harris

  • How to create SAP iviews in Netweaver 7.0

    Hi,
    Please assist in how to create SAP URL & SAP transaction iViews in Netweaver EP 7.0
    Thanks
    Suri.

    Hi,
    Please find the link as requested.
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/creationofDifferentTypesofiViewsinEP7.0]
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/creating+iviews]
    Manoj Chintawar
    Edited by: Manoj Chintawar on Mar 10, 2009 9:50 PM

  • GGB1 Substitution by exit : how to create a new exit ?

    Hi,
    I create a substitution by exit, and I want to use a new exit, please how to create a new exit (transaction or IMG path) ?
    Regards.
    Moderator: Please, search SDN

    CCopy the contents of one and paste it into the other. Or duplicate the first project and then paste the contents of the second.

  • How to create transaction code for maintenance view

    hai friends,
    i hope every thing goes good.
    i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
    i tried and i donot know the screen number and program name and where can i give the view name.
    if any one know please post in details.
    thanks in advance.

    Hi Elam,
    You need to create a "Parameter Transaction".
    What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
    Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
    Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
    Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
    Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
    Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
    Now save the transaction and there you have it.
    Hope this helps.
    Cheers,
    Pat.
    PS. Kindly assign Reward Points to the posts you find helpful.

  • How to create transaction for a maintenance view, Thank you.

    How to create transaction for a maintenance view,
    Thank you.
    deniz...

    Hi Deniz,
    Go to se93.
    Then create the new T.code.
    Under that select parameter Transaction.
    Then give the sm30 in the t.code in default values tab.
    check the checkbox skip initial screen.
    in classification tab.
    click checkbox inherit gui attributes..
    Now below..
    In the default values..
    select
    viewname and give ur table name.
    UPDATE= Xsave
    view - table name ( Should be upper case
    update X ( should be upper case).
    http://www.sap-basis-abap.com/sapbs011.htm
    Hope this helps you.
    Regards,
    Viveks

  • How to create transaction table in R/3

    Hi Gurus,
                  I have created master data table in R/3 with zempid as a primary key. I need to create transaction table for employee and visitor. how can i relate 2 transaction table with employee master table while creating tables in R/3 SE11.
    Notes: both employee and visitor transaction table has zempid.
    please let me know how to create table with relations.
    Thanks & Regards,
    Bharath

    Hi,
    In a normal database (say Oracle), this referential integrity is taken care of by PK-FK (primary key - foreign key) relationships. As far as OLTP - SAP R/3 is concerned, these are exisitng for the tables defined by SAP.
    Speaking about BW:
    1. You will bring master data from R/3--> BW first (its always a good practice), which should mean that empid 1000 - 1007 will flow to BW. Also your OLTP system ensures that there can be no transaction data (due to PK-FK relationships), for any emp. id other than 1000-1007.
    2. There could be another case that when the master data has been transferred to BW, due to time lag, in between master data and transaction data are created in R/3... meaning thereby that R/3 now has both master data about say emp.Id 1008 and transaction data as well.
    3. Now the transaction data is extracted from R/3, which will bring the transaction data for 1008, eventhough the master data for 1008 (loaded in step 1) has not come down to BW.
    4. Such situation can be controlled in BW, there are options wherein you can control this. the options are:
      - Load data even if there is no master data (this will create master data record with key values and nulls in other attributes) - record for 1008 will get loaded in such cases.
    - Do not Load data when there is no master data - The record with 1008 emp. id will not be loaded in such a case.
    Hope this helps.
    Cheers,
    Sumit

  • How to create messages for Validation in transaction type OB28

    Hello All!
    I am creating a validation in transaction type ob28. I have created the first point "prerequisite", second point "Check" and in the third point "Message" I want to put the message number 016 but the next error appears "Entry E ZFI 160 does not exist in T100". How can I create this messages number?
    Thank you in advance!

    Hi Leyre,
    This message applies to a problem with change requests. When creating a message, it's a workbench request that system has to create. Apparently, when you try to create a message, it tries to catch 'tramp' on existing CR which is assigned to a different client in your system. You should try assigning a new CR for this change; you could ask your BASIS team to help you on this.
    Regards,
    Eli

  • How to create F4 for the standard transaction

    Hi all ,
    How to create F4 for the standard transaction for a particular field .
    Bye

    Santosh,
        You can create F4 values for a field in a standard Transaction .
    1. First search for a standard search help meeting your requirement .
    2. If you don't find one, create your own custom (z) serach help .
    ( 1 is preferable )
    After that, include that serch help to the standard field in the transaction .
    For this u need to go to the screen
    ( F1->F9-> screen-> Field )
    Click on the property of the field and include the search help .
    You ll require the access key from the basisi guys as u r changing standard .
    Hope it helps,
    ~ laxmi
    Reward for helpful answers

  • HOW TO Create  variants for transaction MASS on LFA1 object?

    hOW TO Create  variants for transaction MASS on LFA1 object?
    Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
    Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
    Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

    Hi Oscar ,
    You need to create optional date prompt variable  in BW which fills your requirement .
    Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
    if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
    when creating webi schedules , leave prompts as blank.

  • How to create Transaction code for Table Maintanance generator.?

    Hi,
    I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
    Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
    Thanks in advance.
    Best Regards,
    Paddu,

    Hi,
         Check the below steps......
    1. Go to Tcode u2018se93u2019.
    2. Select ' Transaction with parameters'.
    3. Then Transaction 'SM30' with click on skip initial screen
          VIEWNAME : XXX9tABLE NAME)
          UPDATE   : X
    4. Maintain the  Table maintenance generator
      Authorization group : &NC&
      Authorization object :
      Function group : name(xxx)
    Maintenance Screens :
    Maintenance type : One step
    Maint Screen No : Overview screen (2)
    If still u have problem I will send u steps with Screen shot ...send me Yr id.
    Regards,
    Biswanath

Maybe you are looking for