How to create and destroy dynamically an array

How to create an array of container dynamically and destroy it. I have an array of container which is to be sorted by comparision, but in sorting out the elements i want to delete some of the elements based on comparision.I run a for loop based on the number of elements in the array to be sorted. So what i do is take the elements into another array which i want to create it dynamically and reassign the new array back to the old one after sorting and delete it.

Hi kpraveen,
Maybe this thread helps,
http://forums.ni.com/ni/board/message?board.id=330&message.id=18421&query.id=288653#M18421
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Kudos button (Gold Star) and see what happens =s=i=g=n=a=t=u=r=e=
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Similar Messages

How to create and use dynamic queue in JMS

Plz tell me how to create and use a dynamic queue in jms and can reciever file lookup it as it lookup any server configurred queue(written in the server).

Hi,
We can use Azure File services to do this, for more information, please have a look at this article:
http://blogs.msdn.com/b/windowsazurestorage/archive/2014/05/12/introducing-microsoft-azure-file-service.aspx. The Azure File service exposes file shares using the standard SMB 2.1 protocol. Applications running in Azure can now easily share files between
VMs using standard and familiar file system APIs like ReadFile and WriteFile.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to create and use mutable array of UInt8

Hello!
If I get it right, UInt8 *buffer, buffer - is a pointer to a start of array?
Then how to create and use mutable array of UInt8 pointers?
The main target is a creation of the module that will store some byte array requests and will send all of them at the propriate moment.

I try
- (void) scheduleRequest:(UInt8 *)request {
if (!scheduledRequests) scheduledRequests = [[NSMutableArray array] retain];
[scheduledRequests addObject:request];
But get warning:"passing argument 1 of 'addObject:' from incompatible pointer type"

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to create a folder dynamically in KM repository

Hi All,
Could you please let me know how to create the folder dynamically in KM...
Thanks in Advance,

>
Romano Bodini wrote:
> Hi,
>
> Search the forum. And the SDN. Then ask.
>
> [Creating folders in KM dynamically|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1761]
>
> Romano
Actually, "look at the API documentation" should be in that list.

How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

How to create alv table dynamically by performing action on the button.

Hi all,
my requirement is to create alv table dynamically.
that is i will create two buttons
1) show alv table
2) close alv table
if user selects show alv table then the alv table should be displayed.
and if user selects clsoe alv table then the alv table should be closed.
to create alv table dynamically i have followed this procedure.
under view properties i have added salv_wd_table component. then under the action of showalvbutton i went to code wizard and i have selected instantiate used component component use salv_wd_table. the following code will be generated
with this code i am unable to display alv table dynamically correct me where i went wrong kindly send me the necessary steps how to create alv table dynamically
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_salv_wd_table( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
to close table i have used the following code. with this code i am able to achieve the functionality to delete the alv table
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_salv_wd_table( ).
if lo_cmp_usage->has_active_component( ) is initial.
else.
lo_cmp_usage->Delete_component( ).
endif.
Thanks & Regards,
Naveen
Edited by: naveen.webhelp on Feb 10, 2011 5:52 AM

Hi
ALV table will be shown in the viewcontainerUI element.
it is shown there empty if you dont fill the node bound to the data node of the interface controller of the comp usage
SALV_WD_TABLE.
and if you are not getting the table filled in the first place.
then check have you mapped the DATA node to some node in the comp controller
wht basically is your requirment is that you want to show ALV gird on click of one button and delete it on click of other button.
there are many ways to do so.
best way is control the visiblity of the viewcontainer UI element which containes the TABLE view of SALV_WD_table comp.
create an attribute of type WDUI_VISIBILITY name say VIS.
now go to the layout and bound hte visible property of the viewcontainer to this attribute VIS.
then in the showalv grid button's eventhandler write
wd_context->set_attribute(
name = 'VIS'
value = '02'
and in the wddoinit and delete alv grid button's event handler write
wd_context->set_attribute(
name = 'VIS'
value = '01'
thanks
sarbjeet singh

How to declare and initialize a STRING ARRAY (assign strings to array elements)

How to declare and initialize a STRING ARRAY (assign desired strings to elements of an array, for example "abc", "def", "ghi", "jkl", etc.) in LabVIEW? I saw a "string array" block in help, but could not find it in the function palette. Does a spreadsheet string have to be in a file (or can it be in a string constant block)? Thank you.

Hi,
you can do it in several ways:
1. Direct way: Create string array control on front panel and type strings in its elements
2. Programmatically 1: Create string array indicator (or local variable of control), right click on it in block diagram, select "Create constant" from drop down menu. The array constant will appear. Now type values in this constant's strings
3. Programmatically 1: Use "Build array", "Replace array subset", "Insert into array" or "Initialize array" functions from "Functions->Array" palette.
And of course you can combine all of these methods.
Good luck.
Oleg Chutko.

How to create and install a toolbar to a browser using java

Hi all,
Can any one guide me about how to create and install toolbar to a browser using java ??
please any one help me about this,i am not getting any idea about this..
Thanks and Regards
Sandesh S

I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

How to create and execute a function whose return value is a table

hi folks ,
i would like know how to create and execute a function whose return value is a table ,
am new to pl/sql ,
my statement for the function is
SELECT ct.credential_code, c.expiration_date
FROM certifications c, credential_types ct
WHERE ct.crdnt_id = c.crdnt_id
AND c.person_id = person_id;
i would like to have the result of the above query as return value for the function.
Thanks in advance ,
Ashok.c

hi Ps ,
Can you please do small sample ,
that would help me in clear understanding
thanks in advance
ashok.c

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to Create and Test a Zone of Type F1-APP-URL

Hi,
I would like to how to create and test a Zone of Type F1-APP-URL?
What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

How to create and implement a new work schedule rule successfully?

Dear Community,
How to create and implement a new work schedule rule successfully?
In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
Thanks in advance.

Hi,
Follow the below steps to create Work Schedule:
Holiday Calendar
Transaction Code: SCAL
Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
Personnel Area/SubArea Groupings
Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
Maintain perosnnel area/Subarea groupings for work schedule.
i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
Work Schedule
Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
in Period Work Schedule to make a week ( M T W T F S S )
Daily Work Schedule (i.e. Day) -
> Period Work Schedule (i.e. Week)
Work Schedule Rules
Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

How to create and maintain a backup catalog, separate from default location, on and external HD

How to create and maintain a backup catalog on a separate hd - separate from default location of the catalog?

Simply copy the LR catalog backup file to another location. It’s quite small and only contains metadata e.g. your edit develop settings, keywords, captions, titles and camera exif data etc.
The LR backup does not physically copy your image files. So make sure you have a separate system backup for your photo files and folders.

How to create and destroy dynamically an array

Similar Messages

Maybe you are looking for