How to create and configure proxies in ADF mobile using OWSM client agent?

Hi
Can anyone please tell me how to create and configure proxies in ADF mobile application using Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent. I read it in mobile document that,
For secured web services, the user credentials are dynamically injected using ADF Mobile uses Oracle Web Services Manager (OWSM) Lite Mobile ADF Application Agent to create and configure proxies, as well as to request services through the proxies. The user credentials are injected into the OWSM enforcement context when proxies are configured.
I am new with this OWSM, can anyone please give me some hints like how to proceed further for implementing authentication using OWSM lite mobile ADF Application Agent??
Thanks in advance
Raj

Hi Juan
The demo is very useful, and in that Shay describes about the remote login using a regular ADF webapplication as a secured one and deploying it into the server. But I would like to know how to create a local login using OWSM client agent? .
Without creating a regular ADF webapplication, how can i call secured webservices(i.e., by using OWSM client agent how to create and configure proxies to call secured webservice, where the user credentials are injected into webservice request by OWSM client as mentioned in ADF mobile document)??
Regards
Raj

Similar Messages

  • How to create and configure JMSConnection Factory programatically?

    Guys,
              How to create and configure JMSConnection Factory programatically and (<b>NOT THRU CONSOLE</b>)?
              There is an option using the JMSHepler to create the Queues.
              Is there an option to create ConnectionFactories using the same or other classes?
              anshuk

    There are no 8.1 "JMSHelper" extensions for creating conection factories (they've been added for 9.0). Instead, you can use a variety of more generic methods.
              You can create configuration scripts using WLST or wlconfig or wlshell, or make direct calls from java into WebLogic's public JMX mbean APIs (all config tools, including the console, call into these APIs).
              For a JMX example, see the implementation of the "JMSML" utility on dev2dev.bea.com. For WLST examples search for "+WLST +JMS".
              Tom

  • How to create a Document Set in SharePoint 2013 using JavaScript Client Side Object Model (JSOM)?

    Hi,
    The requirement is to create ""Document Sets in Bulk" using JSOM. I am using the following posts:-
    http://blogs.msdn.com/b/mittals/archive/2013/04/03/how-to-create-a-document-set-in-sharepoint-2013-using-javascript-client-side-object-model-jsom.aspx
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/1904cddb-850c-4425-8205-998bfaad07d7/create-document-set-using-ecma-script
    But, when I am executing the code, I am getting error "Cannot read property 'DocumentSet' of undefined "..Please find
    below my code. I am using Content editor web part and attached my JS file with that :-
    <div>
    <label>Enter the DocumentSet Name <input type="text" id="txtGetDocumentSetName" name="DocumentSetname"/> </label> </br>
    <input type="button" id="btncreate" name="bcreateDocumentSet" value="Create Document Set" onclick="javascript:CreateDocumentSet()"/>
    </div>
    <script type="text/javascript" src="//ajax.aspnetcdn.com/ajax/jQuery/jquery-1.7.2.min.js"> </script>
    <script type="text/javascript">
       SP.SOD.executeFunc('sp.js','SP.ClientContext','SP.DocumentSet','SP.DocumentManagement.js',CreateDocumentSet);
    // This function is called on click of the “Create Document Set” button. 
    var ctx;
    var parentFolder;
    var newDocSetName;
    var docsetContentType;
    function CreateDocumentSet() {
        alert("In ClientContext");
        var ctx = SP.ClientContext.get_current(); 
        newDocSetName = $('#txtGetDocumentSetName').val(); 
        var docSetContentTypeID = "0x0120D520";
        alert("docSetContentTypeID:=" + docSetContentTypeID);
        var web = ctx.get_web(); 
        var list = web.get_lists().getByTitle('Current Documents'); 
        ctx.load(list);
        alert("List Loaded !!");
        parentFolder = list.get_rootFolder(); 
        ctx.load(parentFolder);
        docsetContentType = web.get_contentTypes().getById(docSetContentTypeID); 
        ctx.load(docsetContentType);
        alert("docsetContentType Loaded !!");
        ctx.executeQueryAsync(onRequestSuccess, onRequestFail);
    function onRequestSuccess() {       
        alert("In Success");
        SP.DocumentSet.DocumentSet.create(ctx, parentFolder, newDocSetName, docsetContentType.get_id());
        alert('Document Set creation successful');
    // This function runs if the executeQueryAsync call fails.
    function onRequestFail(sender, args) {
        alert("Document Set creation failed" + + args.get_message());
    Please help !!
    Vipul Jain

    Hello,
    I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
    Value cannot be null.Parameter name: context"...
    Also, I tried removing SP.SOD.executeFunc
    from my code, but no success :(
    Kindly suggest !!!
    Vipul Jain

  • How to Create and Define New faults to be used inside our BPEL Process

    Hi All,
    I have created a new BPEL process but unable to add fault handling messages which I'm unable to do because I'm not having any
    experience in creating my own custom fault or runtime faults.
    Can anybody can share any URLS of how to create and where to define these things in BPEL Process.
    Expecting a reply from ASAP. very urgent for me.
    Regards,
    CH

    Hi Arik,
    I opening in JDeveloper 11.1.1.2 but it is asking for migrations but not all migrating and unable to see the project.
    By seeing at the logs it is saying that upgrade failed.
    Please can you share any other URL other than this.
    Regards,
    CH

  • How to create and configure a user for MaxDB monitoring

    Good Morning,
    Is it possible to create a user in MaxDB which can only, check DB State, Data Space (Used, Available, Etc) and Log Space? If possible, how to create it and the respective authorizations?
    The reason i'm asking you that is because i need to give to my monitoring team a MaxDB user which can login to the database and check the status. I have superdba and control, but these are superadmins and i would like to be able to create and give them a restricted user.
    Can you help me on this matter please?
    Thanks.
    Best Regards,
    Pedro Gaspar
    Edited by: Pedro Guerreiro Gaspar on Mar 25, 2011 2:03 PM

    Hello Pedro,
    Check the following website for further information:
    http://maxdb.sap.com/doc/7_8/default.htm
    Regards,
    Eduardo Rezende

  • How to create and configure a custom authorization service

    Anyone has any idea how to create a custom authorization module? Can anyone tell me where can I find a documentation or some example how to do it?
    I appreciate any idea.
    Regards.

    The Access Manager developer guide on the Authentication SPI should be all you need to get started
    http://docs.sun.com/app/docs/doc/819-4675/6n6qfk0nf?a=view

  • How to install and configure WebLogic 10.3 to use 64-bit JDK?

    Hi,
    Is there a preferred/supported way to configure WebLogic to use the 64-bit JRockit that comes with JRockit Mission Control?
    I can't find any official documentation about how to configure WebLogic to use a 64-bit JDK. From other forum posts I can tell we need to use the 64-bit JRockit that is bundled with JRockit Mission Control (available at [http://www.oracle.com/technology/software/products/jrockit/index.html]) but then we are kind of stuck - the configure script which let me select a JDK for a domain doesn't seem to let me re-configure an existing domain, and I can't find anything within the admin console that would let me set the JDK to use.
    I was able to rename the existing jrockit_160_05 directory to e.g. jrockit_160_05_original and then rename the jrmc directory to "jrockit_160_05", effectively taking the place of the JDK being used but this seemed like a bad way to do it. I also found via Google this page: [http://java.sodeso.nl/application-servers/bea-weblogic/how-can-i-change-the-jdk-installation-that-weblogic-uses] which basically says to modify the JAVA_HOME environment variable in the start scripts, but this seems like the same thing.
    With the plethora of products and the different ways they are bundled, combined with all the documentation about everything, I thought I would find something but I keep coming up blank. Does anyone have suggestions or pointers?
    Thanks,
    KaJun

    Make sure your environment configuration is supported here:
    http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
    Then, you need to have the correct 64bit JDK installed. Sounds like you have done that.
    Then download and run the generic platform installer as described here with your 64bit supported JDK:
    http://download.oracle.com/docs/cd/E12839_01/doc.1111/e14142/start.htm#i1077535
    Notice how the link you post has the generic installer for all the 64bit JVM rows, but the other installer for the 32bit JVMs on the 64bit OS?

  • How to create DVT Clickable Piechart in ADF Mobile framework

    Hi All,
    I am working on ADF Mobile app which displays piechart component on the mobile UI screen. I want to have clickable piechart which the user will click to navigate to next page to show more details of the pie clicked/touched.
    I have looked into this doc link below but there is no info on how to create a clickable pie chart.
    http://docs.oracle.com/cd/E37975_01/doc.111240/e24475/amxui.htm#ADFMF670
    Is there any documentation on how to do that?
    Thanks.
    -Nirav
    Edited by: Shah23 on May 29, 2013 11:10 AM

    Hi Nirav,
    There is an action attribute on the dvtm:pieDataItem tag where you can specify which action to take when the user touches the pie slice.
    Hope this helps
    Katia

  • How to create and configure a historical database?

    Hello everyone!
    I apologize if my question is duplicated,
    or outside the context of the forum
    and ask if it is that redirects
    me to the right page!
    I have a SQL Server Express 2008 R2 Database installed on a Microsoft Windows Server Standard 2008 R2 Server.
    I know that SQL Server Express 2008 R2 Databases have a limit of 10 GB of data per Database.
    I am going to create a JOB for Back up and a Log Shipping linking to other Server that has a SQL Server Standard 2008 R2 Server.
    I know that when my SQL Srv Express goes to 10 GB into a Database I will need to clean it.
    But what and how could I do to create a kind of "Historical Database", to receive all data from the SQL Srv Express, even when I clean database when it goes to 10 GB, without clean the historical database too?
    Thanks!

    Probably Replication is your best option.
    BOL: Replication Considerations (SQL Server Express)
    Replication in SQL Server Express
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Database Design
    New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

  • How to create and install a toolbar to a browser using java

    Hi all,
    Can any one guide me about how to create and install toolbar to a browser using java ??
    please any one help me about this,i am not getting any idea about this..
    Thanks and Regards
    Sandesh S

    I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

  • How to properly create and configure SharePoint 2013 Search service with PowerShell?

    Hello Forum,
    I have installed SharePoint 2013 across three tier servers:
    WFE Server  (Of course, SharePoint is installed here. Bsically this is just a Web server)
    APP Server  (Of course, SharePoint is installed here + Central Admin + Service Apps).
    SQL Server  
    I now want to create and configure the Search service, obviously on the APP Server, But of course the search functionality should work correctly on the WFE server to.
    I want to do this via a proper PowerShell script. I found Spence Harbar's script on: (http://www.harbar.net/articles/sp2013mt.aspx), But it has three problems, and they are as follows:
    1) Spence Harbar himself literally stated on his article that this script is for: "deploying on a single server farm", But what if I have three tier servers? Could anyone please help me out in suggesting the required tweaks in the
    script?
    2) By default Search uses the SP_Farm account, So, How can I change the script to use other dedicated account for the search service e.g. SP_SearchAcc ?
    3) How can I modify the script to specify a default Search center?
    4) Apart from all the three aforementioned point - Is the script missing anything? 
    I would greatly appreciate your inputs - Thanks !

    the only differences are where you place the components.  if you are doing a small server farm with a 1-1-1, most likely you just need to change the script so that you set the index and query processing component on the front end, but the others on
    the app server.  just a 2 second update... just keep in mind this will work, but I am making several assumptions without any knowledge of your farm, users, capabilities. 
    generally, there would be more of a breakout on the topology than that, but im guessing for this farm that you wont have dedicated search servers.  also, a lot depends on # users (rps really), # items in index, size of VMs (RAM for query processing,
    Disk for index, etc, etc), and making sure the topology works for your particular environment and needs. 
    if you want more detailed topology help, which aligns as closely as possible to "best practices" (not that those exist in SharePoint, go ahead and provide the total # users, average/peak RPS for search, current index size, content source types,
    VM specs RAM, CPU, #/Size of drives, HA concerns/priority (obviously isn't, since only 1-1-1)
    Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

  • How to Create and Test a Zone of Type F1-APP-URL

    Hi,
    I would like to how to create and test a Zone of Type F1-APP-URL?
    What all is required to setup an ADF application based URL in F1-APP-URL, what to configure and what are the basics or definite steps required to have a Zone of Type F1-APP-URL up and running in the application? Any Sample ADF components to be created?
    Please kindly let me know. Any test or dummy URL existing already which is based on ADF?

    Refer to Doc. Id 1515146.1 on the support site. Although for the moment it refers to a MWM example and may not be much of a help but it'd give a basic idea as to how it should be done.

  • ADF 11g How to create the custom FilterableQueryDescriptor for adf table

    Can you please let me know on the following.
    1. I am dispalying the adf table using a List from the managed bean
    2. I wanted to filter the table using the filter model.
    3. i wanted to create the sub class of FilterableQueryDescriptor which i can specify. Not finding enough information on how to create and add the information in the setFilterCriteria
    Can you please provide some insight into this topci

    Hello there
    I have the same issue: chaging the background color of some column headers.
    My application is using a custom skinning and when i had headerClass property with a custom class defined in a separate css file, the page generated specified first the class from the skinning and then my new class definition. But my skinning is specifying a background color so the color is not overriden. Any idea?
    ADF code:
    <link type="text/css" rel="stylesheet" href="../../css/pivot.css" id="myStyles"/>
    <af:column headerText="#{level1.userObject.name}"
    headerClass="inputHeader"
    sortable="false" align="center" width="100"
    id="col_level1" >
    Generate HTML code:
    <th align="center" class="xuh inputHeader" afrroot="true" rowspan="2" afrleaf="true" dindex="6" id="pt1:tableId:col_level1" style="">
    <div class="x13t">AEKLF</div>
    </th>
    My CSS file:
    .inputHeader{
    background-color: Red;
    background-image: none;
    color: Black;
    font-weight: bold;
    Thanks for your help !

  • How to create and call a COM component in Java

    Hi All,
    can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
    actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
    So please can you help in this.
    Thanks in advance.

    As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
    If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
    [http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
    However,if you are looking for ready made solutions ?
    Implementation any one of the solutions stated below might serve your cause.
    Open Source Solutions:
    [http://j-interop.org/]
    [http://www.danadler.com/jacob/]
    Commercial Solutions:
    [http://javacombridge.com/]
    [http://www.jnbridge.com/]
    [http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
    [http://j-integra.intrinsyc.com/]
    Hope this might help :)
    REGARDS,
    RaHuL

  • How to create and implement a new work schedule rule successfully?

    Dear Community,
    How to create and implement a new work schedule rule successfully?
    In other words, what are all the basic steps to create and implement a new work schedule rule successfully?
    Thanks in advance.

    Hi,
    Follow the below steps to create Work Schedule:
    Holiday Calendar
    Transaction Code: SCAL
    Holiday calendar comprises of list of paid holidays to be given to employees on festivals by the company.
    Personnel Area/SubArea Groupings
    Go to SPRO --> Time Management --->Work Schedules --> Personnel SubArea Groupings
    Maintain perosnnel area/Subarea groupings for work schedule.
    i.e. Suppose in Mumbai you have WS = GEN ( 10 to 6) and in Chennai you have WS = NORM ( 8 to 4 )
    Work Schedule
    Go to SPRO --> Time Management --->Work Schedules -->Daily Work Schedules
    Go to SPRO --> Time Management --->Work Schedules -->Period Work Schedules
    Daily Work Schedule is actually your office timings with breaks (paid /unpaid) i.e. Planned Working Time which is then included
    in Period Work Schedule to make a week ( M T W T F S S )
    Daily Work Schedule (i.e. Day) -
    > Period Work Schedule (i.e. Week)
    Work Schedule Rules
    Go to SPRO --> Time Management --->Work Schedules -->Work Schedule Rules and Work Schedules
    After doing above mentioned configurations,maintain employee group/subgroup groupings in which you have to define which calendar is applicable for which type of employees for which work schedule.
    You will maintain this work schedule in infotype 0007 - Planned Working Time of employee via transaction code - PA30

Maybe you are looking for