How to create cache?

In my web application we have to cerate cache. how can i create cache and what are the jar files.
thanks in advance

Hi,
By defalult, web application creates cache itself.
But if u want to remove cache then add the below thing in the header section of your jsp page:
response.setHeader("Cache-Control", "no-cache");
response.setHeader("pragma","no-cache");
response.setDateHeader("Expires", 0);
Jar Files: are the collection of java classes.

Similar Messages

How to create and use cache

hi all,
In my web application I have to maintain cache. how can i create cache and how can I use that cache objects.
thank you in advance....

Your question is vague, so what follows is just a wild guess.
Depending on your application's needs you can use one of the following contexts that are available for J2EE web applications:
- ServletContext (for an application-wide cache)
- HttpSession (well, for a session-specific cache)
- HttpServletRequest (for a request-scoped cache)
All of the contexts listed above provide getAttribute/setAttribute methods that can be used to store values in the respective contexts.

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

Error in creating Cache Group

Hi,
When i tried to create cache group i am getting below error
CREATE READONLY CACHE GROUP customer_orders
FROM myuser.customer
(cust_num NUMBER(6) NOT NULL,
region VARCHAR2(10),
name VARCHAR2(50),
address VARCHAR2(100),
PRIMARY KEY(cust_num)),
myuser.orders
(ord_num NUMBER(10) NOT NULL,
cust_num NUMBER(6) NOT NULL,
when_placed DATE NOT NULL,
when_shipped DATE NOT NULL,
PRIMARY KEY(ord_num),
FOREIGN KEY(cust_num) REFERENCES myuser.customer(cust_num)) ;
5220: Permanent Oracle connection failure error in OCIServerAttach(): ORA-12154: TNS:could not resolve the connect identifier specified rc = -1
5131: Cannot connect to backend database: OracleNetServiceName = "orcl_db", uid = "XXXXXXX", pwd is hidden, TNS_ADMIN = "C:\TimesTen11.2.2", ORACLE_HOME= ""
But my Oracle database Name is MYdatabase
Oracle LSNRCTL
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
Start Date 07-AUG-2012 10:31:38
Uptime 4 days 3 hr. 1 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\TimesTen11.2.2\listener.ora
Listener Log File E:\app\XXXXXXX\diag\tnslsnr\localhost\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1522ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1522)))
Services Summary...
Service "MYdatabaseXDB" has 1 instance(s).
Instance "MYdatabase", status READY, has 1 handler(s) for this service...
Service "MYdatabase" has 1 instance(s).
Instance "MYdatabase", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
how to change OracleNetServiceName = "orcl_db" to OracleNetServiceName = "MYdatabase"
Thanks!

You should create the cache groups by using cachadmin user, not use object owner user.
In Oracle DB:
SQL> @grantCacheAdminPrivileges "cacheadmin"
Please enter the administrator user id
The value chosen for administrator user id is cacheadmin
***************** Initialization for cache admin begins ******************
0. Granting the CREATE SESSION privilege to CACHEADMIN
1. Granting the TT_CACHE_ADMIN_ROLE to CACHEADMIN
2. Granting the DBMS_LOCK package privilege to CACHEADMIN
3. Granting the RESOURCE privilege to CACHEADMIN
4. Granting the CREATE PROCEDURE privilege to CACHEADMIN
5. Granting the CREATE ANY TRIGGER privilege to CACHEADMIN
6. Granting the DBMS_LOB package privilege to CACHEADMIN
7. Granting the SELECT on SYS.ALL_OBJECTS privilege to CACHEADMIN
8. Granting the SELECT on SYS.ALL_SYNONYMS privilege to CACHEADMIN
9. Checking if the cache administrator user has permissions on the default
tablespace
     Permission exists
11. Granting the CREATE ANY TYPE privilege to CACHEADMIN
********* Initialization for cache admin user done successfully *********
SQL>In TimesTen:
Command> CREATE USER cacheadmin IDENTIFIED BY oracle;
User created.
Command> GRANT CREATE SESSION, CACHE_MANAGER, CREATE ANY TABLE, DROP ANY TABLE TO cacheadmin;
Command>
Command> CREATE USER oratt IDENTIFIED BY oracle;
User created.
Command> grant create session to oratt;
Command>
[oracle@tt1 ~]$ ttIsql "DSN=db_cache;UID=cacheadmin;PWD=oracle;OraclePWD=oracle"
Copyright (c) 1996-2010, Oracle. All rights reserved.
Type ? or "help" for help, type "exit" to quit ttIsql.
connect "DSN=db_cache;UID=cacheadmin;PWD=oracle;OraclePWD=oracle";
Connection successful: DSN=db_cache;UID=cacheadmin;DataStore=/u01/app/oracle/datastore/db_cache;DatabaseCharacterSet=AL32UTF8;ConnectionCharacterSet=US7ASCII;DRIVER=/u01/app/oracle/product/11.2.1/TimesTen/tt1/lib/libtten.so;PermSize=100;TempSize=32;TypeMode=0;CacheGridEnable=0;OracleNetServiceName=ORCL;
(Default setting AutoCommit=1)
Command> call ttCacheUidPwdSet('cacheadmin','oracle');
Command>
Command> CREATE READONLY CACHE GROUP readcache
       >   AUTOREFRESH INTERVAL
       >   5 SECONDS
       > FROM oratt.readtab (
       >        a NUMBER NOT NULL PRIMARY KEY,
       >        b VARCHAR2(100) );
Command> Additionally dont forget to issue the grants for cacheadmin user in Oracle DB
SQL> GRANT SELECT ON readtab TO cacheadmin;
Grant succeeded.Regards,
Gennady

How to Create an Oracle BAM Server Connection?

I m following the steps at the end of this post to create the connection but at the end I m getting this message from JDev:
{Unable to write to
/C:/JDeveloper/mywork/Application1/.adf/META-INF/connections.xml
because it is a read-only. Either make it writable or allow it to be made writable through source control.}
it creates the directory C:/JDeveloper/mywork/Application1/.adf/META-INF/ with only a adf-config.xml file but NOT the connections.xml any one knows what is wrong?
Bellow is the stpes I m following. Its exactly what is written at the Oracle Fusion Middleware Developer´s guide for Oracle SOA Suite 11g Release 1(11.1.1) E10224-01
To create an Oracle BAM connection:
1. Select New from the File main menu in Oracle JDeveloper.
The New Gallery dialog opens.
2. Choose Connections from the General category.
3. Select BAM Connection in the Items list, and click OK.
The BAM Connection wizard opens.
4. Provide a name for the connection. Leave the Create Connection In selection as
Application Resources.
5. Click Next.
6. Enter the following connection information about the Oracle BAM instance.
7. Click Next.
8. Test the connection by clicking Test Connection. If the connection was successful,
the following message appears:
Passed.
9. Click Finish.
Note: You can create connections to Oracle BAM in the Oracle
JDeveloper Resource Palette as well as the Application Resources
panel of a specific application. It is recommended that you create these
connections in the Application Resources pane rather than the
Resource Palette.
Field Description
BAM Web Host Enter the name of the host on which the BAM report server and
Web server are installed. In most cases, the BAM Web host and
Oracle BAM Server host are the same.
BAM Server Host Enter the name of the host on which the Oracle BAM Server is
installed.
User Name Enter the Oracle BAM Server user name (typically bamadmin).
Password Enter the password of the user name.
HTTP Port Enter the port number or accept the default value of 8888. This is
the HTTP port for the BAM Web host.
RMI Port Enter the port number or accept the default value of 9085. The
RMI port is for the BAM report cache, which is part of the Oracle
BAM Server.
Use HTTPS Select this check box if you want to use secure HTTP (HTTPS) to
connect to the Oracle BAM Server during design time.
Otherwise, HTTP is used.
Message was edited by:
Mario.Mesquita

Ok that will be nice, but is not the case I dont want to read the tutorial, the problem is I already start to read and execute the tutorial you told me the problem is this tutorial it doesnt show how to do everything from scratch because you already have inside the zip file everything like xmls etc etc, and I want to get my DO and create the process myself, I dont want to get something that it is already done, this tutorial does not show for example how to create this composite.xml, this file it is already inside the zip file, so this way I just follow half of the process and dont learn how to make the whole process.
tks

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create drill down report in sap query

how to create drill down report in sap query ,

hi,
The pdf below gives the steps to create drill down report.
http://www.sappoint.com/abap/eis.pdf
also check.
<a href="http://72.14.203.104/search?q=cache:k-SFYy_rjPIJ:www.hrexpertonline.com/archive/Volume%252003%2520(2">http://72.14.203.104/search?q=cache:k-SFYy_rjPIJ:www.hrexpertonline.com/archive/Volume%252003%2520(2</a>
regs,
jaga

How to create hashed table in runtime

hi experts
how to create hashed table in runtime, please give me the coading style.
please help me.
regards
subhasis

Hi,
Have alook at the code, and pls reward points.
Use Hashed Tables to Improve Performance :
report zuseofhashedtables.
Program: ZUseOfHashedTables **
Author: XXXXXXXXXXXXXXXXXX **
Versions: 4.6b - 4.6c **
Notes: **
 this program shows how we can use hashed tables to improve **
 the responce time. **
 It shows, **
 1. how to declare hashed tables **
 2. a cache-like technique to improve access to master data **
 3. how to collect data using hashed tables **
 4. how to avoid deletions of unwanted data **
Results: the test we run read about 31000 rows from mkpf, 150000 **
 rows from mseg, 500 rows from makt and 400 from lfa1. **
 it filled ht_lst with 24500 rows and displayed them in **
 alv grid format. **
 It needed about 65 seconds to perform this task (with **
 all the db buffers empty) **
 The same program with standard tables needed 140 seconds **
 to run with the same recordset and with buffers filled in **
Objetive: show a list that consists of all the material movements **
 '101' - '901' for a certain range of dates in mkpf-budat. **
the columns to be displayed are: **
 mkpf-budat, **
 mkpf-mblnr, **
 mseg-lifnr, **
 lfa1-name1, **
 mkpf-xblnr, **
 mseg-zeile **
 mseg-charg, **
 mseg-matnr, **
 makt-maktx, **
 mseg-erfmg, **
 mseg-erfme. **
or show a sumary list by matnr - menge **
You'll have to create a pf-status called vista - **
See form set_pf_status for details **
tables used -
tables: mkpf,
 mseg,
 lfa1,
 makt.
global hashed tables used
data: begin of wa_mkpf, "header
 mblnr like mkpf-mblnr,
 mjahr like mkpf-mjahr,
 budat like mkpf-budat,
 xblnr like mkpf-xblnr,
 end of wa_mkpf.
data: ht_mkpf like hashed table of wa_mkpf
 with unique key mblnr mjahr
 with header line.
data: begin of wa_mseg, " line items
 mblnr like mseg-mblnr,
 mjahr like mseg-mjahr,
 zeile like mseg-zeile,
 bwart like mseg-bwart,
 charg like mseg-charg,
 matnr like mseg-matnr,
 lifnr like mseg-lifnr,
 erfmg like mseg-erfmg,
 erfme like mseg-erfme,
 end of wa_mseg.
data ht_mseg like hashed table of wa_mseg
 with unique key mblnr mjahr zeile
 with header line.
cache structure for lfa1 records
data: begin of wa_lfa1,
 lifnr like lfa1-lifnr,
 name1 like lfa1-name1,
 end of wa_lfa1.
data ht_lfa1 like hashed table of wa_lfa1
 with unique key lifnr
 with header line.
cache structure for material related data
data: begin of wa_material,
 matnr like makt-matnr,
 maktx like makt-maktx,
 end of wa_material.
data: ht_material like hashed table of wa_material
 with unique key matnr
 with header line.
result table
data: begin of wa_lst, "
 budat like mkpf-budat,
 mblnr like mseg-mblnr,
 lifnr like mseg-lifnr,
 name1 like lfa1-name1,
 xblnr like mkpf-xblnr,
 zeile like mseg-zeile,
 charg like mseg-charg,
 matnr like mseg-matnr,
 maktx like makt-maktx,
 erfmg like mseg-erfmg,
 erfme like mseg-erfme,
 mjahr like mseg-mjahr,
 end of wa_lst.
data: ht_lst like hashed table of wa_lst
 with unique key mblnr mjahr zeile
 with header line.
data: begin of wa_lst1, " sumary by material
 matnr like mseg-matnr,
 maktx like makt-maktx,
 erfmg like mseg-erfmg,
 erfme like mseg-erfme,
 end of wa_lst1.
data: ht_lst1 like hashed table of wa_lst1
 with unique key matnr
 with header line.
structures for alv grid display.
itabs
type-pools: slis.
data: it_lst like standard table of wa_lst with header line,
 it_fieldcat_lst type slis_t_fieldcat_alv with header line,
 it_sort_lst type slis_t_sortinfo_alv,
 it_lst1 like standard table of wa_lst1 with header line,
 it_fieldcat_lst1 type slis_t_fieldcat_alv with header line,
 it_sort_lst1 type slis_t_sortinfo_alv.
structures
data: wa_sort type slis_sortinfo_alv,
 ls_layout type slis_layout_alv.
global varialbes
data: g_lines type i.
data: g_repid like sy-repid,
 ok_code like sy-ucomm.
selection-screen
"text: Dates:
select-options: so_budat for mkpf-budat default sy-datum.
"text: Material numbers.
select-options: so_matnr for mseg-matnr.
selection-screen uline.
selection-screen skip 1.
"Text: show summary by material.
parameters: gp_bymat as checkbox default ''.
start-of-selection.
perform get_data.
perform show_data.
end-of-selection.
 FORM get_data *
form get_data.
 select mblnr mjahr budat xblnr
 into table ht_mkpf
 from mkpf
 where budat in so_budat. " make use of std index.
have we retrieved data from mkpf?
describe table ht_mkpf lines g_lines.
if g_lines > 0.
if true then retrieve all related records from mseg.
Doing this way we make sure that the access is by primary key
of mseg.
The reason is that is faster to filter them in memory
than to allow the db server to do it.
 select mblnr mjahr zeile bwart charg
 matnr lifnr erfmg erfme
 into table ht_mseg
 from mseg
 for all entries in ht_mkpf
 where mblnr = ht_mkpf-mblnr
 and mjahr = ht_mkpf-mjahr.
endif.
fill t_lst or t_lst1 according to user's choice.
if gp_bymat = ' '.
 perform fill_ht_lst.
else.
 perform fill_ht_lst1.
endif.
endform.
form fill_ht_lst.
refresh ht_lst.
Example: how to discard unwanted data in an efficient way.
loop at ht_mseg.
filter unwanted data
 check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
 check ht_mseg-matnr in so_matnr.
read header line.
 read table ht_mkpf with table key mblnr = ht_mseg-mblnr
 mjahr = ht_mseg-mjahr.
 clear ht_lst.
* note : this may be faster if you specify field by field.
 move-corresponding ht_mkpf to ht_lst.
 move-corresponding ht_mseg to ht_lst.
 perform read_lfa1 using ht_mseg-lifnr changing ht_lst-name1.
 perform read_material using ht_mseg-matnr changing ht_lst-maktx.
 insert table ht_lst.
endloop.
endform.
form fill_ht_lst1.
refresh ht_lst1.
Example: how to discard unwanted data in an efficient way.
 hot to simulate a collect in a faster way
loop at ht_mseg.
filter unwanted data
 check ht_mseg-bwart = '101' or ht_mseg-bwart = '901'.
 check ht_mseg-matnr in so_matnr.
* note : this may be faster if you specify field by field.
 read table ht_lst1 with table key matnr = ht_mseg-matnr
 transporting erfmg.
 if sy-subrc <> 0. " if matnr doesn't exist in sumary table
 " insert a new record
 ht_lst1-matnr = ht_mseg-matnr.
 perform read_material using ht_mseg-matnr changing ht_lst1-maktx.
 ht_lst1-erfmg = ht_mseg-erfmg.
 ht_lst1-erfme = ht_mseg-erfme.
 insert table ht_lst1.
 else." a record was found.
 " collect erfmg. To do so, fill in the unique key and add
 " the numeric fields.
 ht_lst1-matnr = ht_mseg-matnr.
 add ht_mseg-erfmg to ht_lst1-erfmg.
 modify table ht_lst1 transporting erfmg.
 endif.
endloop.
endform.
implementation of cache for lfa1.
form read_lfa1 using p_lifnr changing p_name1.
 read table ht_lfa1 with table key lifnr = p_lifnr
 transporting name1.
if sy-subrc <> 0.
 clear ht_lfa1.
 ht_lfa1-lifnr = p_lifnr.
 select single name1
 into ht_lfa1-name1
 from lfa1
 where lifnr = p_lifnr.
 if sy-subrc <> 0. ht_lfa1-name1 = 'n/a in lfa1'. endif.
 insert table ht_lfa1.
endif.
p_name1 = ht_lfa1-name1.
endform.
implementation of cache for material data
form read_material using p_matnr changing p_maktx.
read table ht_material with table key matnr = p_matnr
transporting maktx.
if sy-subrc <> 0.
 ht_material-matnr = p_matnr.
 select single maktx into ht_material-maktx
 from makt
 where spras = sy-langu
 and matnr = p_matnr.
 if sy-subrc <> 0. ht_material-maktx = 'n/a in makt'. endif.
 insert table ht_material.
endif.
p_maktx = ht_material-maktx.
endform.
form show_data.
if gp_bymat = ' '.
 perform show_ht_lst.
else.
 perform show_ht_lst1.
endif.
endform.
form show_ht_lst.
"needed because the FM can't use a hashed table.
it_lst[] = ht_lst[].
perform fill_layout using 'full display'
 changing ls_layout.
perform fill_columns_lst.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 i_callback_pf_status_set = 'SET_PF_STATUS'
 is_layout = ls_layout
 it_fieldcat = it_fieldcat_lst[]
 it_sort = it_sort_lst
 tables
 t_outtab = it_lst
 exceptions
 program_error = 1
 others = 2.
endform.
form show_ht_lst1.
"needed because the FM can't use a hashed table.
it_lst1[] = ht_lst1[].
perform fill_layout using 'Sumary by matnr'
 changing ls_layout.
perform fill_columns_lst1.
perform sort_lst.
g_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 i_callback_program = g_repid
 i_callback_pf_status_set = 'SET_PF_STATUS'
 is_layout = ls_layout
 it_fieldcat = it_fieldcat_lst1[]
 it_sort = it_sort_lst
 tables
 t_outtab = it_lst1
 exceptions
 program_error = 1
 others = 2.
endform.
form fill_layout using p_window_titlebar
 changing cs_layo type slis_layout_alv.
clear cs_layo.
cs_layo-window_titlebar = p_window_titlebar.
cs_layo-edit = 'X'.
cs_layo-edit_mode = space.
endform. " armar_layout_stock
form set_pf_status using rt_extab type slis_t_extab.
create a new status
and then select extras -> adjust template -> listviewer
set pf-status 'VISTA'.
endform. "set_pf_status
define add_lst.
clear it_fieldcat_lst.
it_fieldcat_lst-fieldname = &1.
it_fieldcat_lst-outputlen = &2.
it_fieldcat_lst-ddictxt = 'L'.
it_fieldcat_lst-seltext_l = &1.
it_fieldcat_lst-seltext_m = &1.
it_fieldcat_lst-seltext_m = &1.
if &1 = 'MATNR'.
 it_fieldcat_lst-emphasize = 'C111'.
endif.
append it_fieldcat_lst.
end-of-definition.
define add_lst1.
clear it_fieldcat_lst.
it_fieldcat_lst1-fieldname = &1.
it_fieldcat_lst1-outputlen = &2.
it_fieldcat_lst1-ddictxt = 'L'.
it_fieldcat_lst1-seltext_l = &1.
it_fieldcat_lst1-seltext_m = &1.
it_fieldcat_lst1-seltext_m = &1.
append it_fieldcat_lst1.
end-of-definition.
form fill_columns_lst.
set columns for output.
refresh it_fieldcat_lst.
add_lst 'BUDAT' 10.
add_lst 'MBLNR' 10.
add_lst 'LIFNR' 10.
add_lst 'NAME1' 35.
add_lst 'XBLNR' 15.
add_lst 'ZEILE' 5.
add_lst 'CHARG' 10.
add_lst 'MATNR' 18.
add_lst 'MAKTX' 30.
add_lst 'ERFMG' 17.
add_lst 'ERFME' 5.
add_lst 'MJAHR' 4.
endform.
form fill_columns_lst1.
set columns for output.
refresh it_fieldcat_lst1.
add_lst1 'MATNR' 18.
add_lst1 'MAKTX' 30.
add_lst1 'ERFMG' 17.
add_lst1 'ERFME' 5..
endform.
Regards,
Ameet

How to create new OC4J instance in AS 10.1.3 with BC4J- and ADF-Libraries

Hi
I have done all the steps mentioned in this thread:
How to create new OC4J instance in AS 10.1.3
However, the new created OC4J instance obviously misses some libraries. If I deploy my Application to this OC4J I get an internal error: Class not found: oracle.jbo.JboException.
The same Application runs well in the "home" Instance.
What is the trick, to create a new OC4J instance, which more or less behaves the same way as the "home" instances (and especially has all the same libraries)?
Thanks for your help
Frank Brandstetter

I encountered this last month. I definitely agree that it is a glaring omission to not have "Create Like" functionality when instantiating new containers. Here's my notes on the manual steps required after using createinstance to create the fresh container. Not too bad. I've been deploying ADF applications to the new container with no problems after this.
==============
The default (home) OC4J container is pre-configured for ADF 10.1.3 applications; however, when $ORACLE_HOME/bin/createinstance is used to create additional containers, these containers are not configured automatically to host ADF 10.1.3 applications.
I followed these manual steps:
1. $ORACLE_HOME/j2ee/home/config/server.xml defines three shared libraries that "install" the needed JARs for Oracle ADF applications in your application server instance (container). Note that "install" does not necessarily mean available to applications (see Step 2). Copy the three shared library element definitions to the <application-server> element of your new container (in server.xml).
<shared-library name="oracle.expression-evaluator" version="10.1.3" library-compatible="true">
 <code-source path="/usr2/oracle/as10130/jlib/commons-el.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/oracle-el.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/jsp-el-api.jar"/>
</shared-library>
<shared-library name="adf.oracle.domain" version="10.1.3" library-compatible="true">
 <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
 <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
 <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
 <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
 <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
 <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
 <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
 <import-shared-library name="oracle.xml"/>
 <import-shared-library name="oracle.jdbc"/>
 <import-shared-library name="oracle.cache"/>
 <import-shared-library name="oracle.dms"/>
 <import-shared-library name="oracle.sqlj"/>
 <import-shared-library name="oracle.toplink"/>
 <import-shared-library name="oracle.ws.core"/>
 <import-shared-library name="oracle.ws.client"/>
 <import-shared-library name="oracle.xml.security"/>
 <import-shared-library name="oracle.ws.security"/>
 <import-shared-library name="oracle.ws.reliability"/>
 <import-shared-library name="oracle.jwsdl"/>
 <import-shared-library name="oracle.http.client"/>
 <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
<shared-library name="adf.generic.domain" version="10.1.3" library-compatible="true">
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/bc4jdomgnrc.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/lib"/>
 <code-source path="/usr2/oracle/as10130/jlib/commons-cli-1.0.jar"/>
 <code-source path="/usr2/oracle/as10130/mds/lib/concurrent.jar"/>
 <code-source path="/usr2/oracle/as10130/mds/lib/mdsrt.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/share.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/regexp.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/xmlef.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfmtl.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adfui.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/adf-connections.jar"/>
 <code-source path="/usr2/oracle/as10130/BC4J/jlib/dc-adapters.jar"/>
 <code-source path="/usr2/oracle/as10130/ord/jlib/ordim.jar"/>
 <code-source path="/usr2/oracle/as10130/ord/jlib/ordhttp.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/ojmisc.jar"/>
 <code-source path="/usr2/oracle/as10130/jlib/jdev-cm.jar"/>
 <code-source path="/usr2/oracle/as10130/lib/xsqlserializers.jar"/>
 <import-shared-library name="oracle.xml"/>
 <import-shared-library name="oracle.jdbc"/>
 <import-shared-library name="oracle.cache"/>
 <import-shared-library name="oracle.dms"/>
 <import-shared-library name="oracle.sqlj"/>
 <import-shared-library name="oracle.toplink"/>
 <import-shared-library name="oracle.ws.core"/>
 <import-shared-library name="oracle.ws.client"/>
 <import-shared-library name="oracle.xml.security"/>
 <import-shared-library name="oracle.ws.security"/>
 <import-shared-library name="oracle.ws.reliability"/>
 <import-shared-library name="oracle.jwsdl"/>
 <import-shared-library name="oracle.http.client"/>
 <import-shared-library name="oracle.expression-evaluator"/>
</shared-library>
2. To make the necessary ADF and JSF support libraries available to your deployed ADF application, the default application (that your ADF application and the majority of applications should inherit from) should explicitly import the shared library in the <orion-application> element of $ORACLE_HOME/j2ee/<your container>/config/application.xml.
<imported-shared-libraries>
 <import-shared-library name="adf.oracle.domain"/>
</imported-shared-libraries>
Note: the adf.oracle.domain shared library imports several other shared libraries including oracle.expression-evaluator.

Creating Caches for faster browsing experiences

I really like the functionality with spry tabbed panels. I am creating an online portfolio and in one of my pages, I would like to put up many documents that I have created over the years. These documents (mainly pdfs) come from the root folder at average sizes of about 100kb per document. I also tried to accomodate browsers who don't have built in PDF readers in their web browser (eg. firefox) by providing the document via a Scribd embed.
As a newb, i'm learning things on the fly and on this fly, i've discovered that with all these Scribd embeds loading up simultaneously, the page contains the set of tabbed panels can be quite slow. Gramps has been awesome in suggesting that I use a user activated pop-up and by using caches.
I understand how caches work, but not sure how I can actually code one into my site.
Is it standard protocol for people to use a cache manifest maker?
How do I cache the embed codes given to me from scribd?
Where do I attach the manifest html code? at the top of every page?
If the data from the manifest is downloaded by the browser on page1, when the viewer navigates to page2, will the data still be accessible or will it require a second download.
Kale

Have a look here http://www.gayadesign.com/diy/caching-external-data-in-php/ and here http://www.profilepicture.co.uk/caching-api-responses-php/ or otherwise Google the subject.
Gramps

More than one root table ,how to design cache group ?

hi,
each cache group have onle one root table , many child table ,if my relational model is :
A(id number,name ....,primary key id)
B(id number,.....,primary key id)
A_B_rel (aid number,bid number,foreign key aid referenc a (id),
foreign key bid referenc b(id))
my select statement is "select ... from a,b,a_b_rel where ...."，
i want to cache these three table , how should i create cache group ?
my design is three awt , Cache group A for A , Cache Group b for b, Cache group ab to a_b_rel ?
are there other better solution ?

As you have discovered, you cannot put all three of these tables into one cache group. For READONLY cache groups the solution is simple, put two of the tables (say A and A_B) in one cache group and the other table (B) in a different cache group and make sure that both use the same AUTOREFRESH interval.
For your case, using AWT cache groups, the situation is a bit mnore complicated. You must cache the tables as two different cache groups as mentioned above, but you cannot define a foreign key relationship in TimesTen between tables in different cache groups. Hence you will need to add logic to your application to check and enforce the 'missing' foreignb key relationship (B + A_B in this example) to ensure that you do not inadvertently insert data that would violate the FK relationship defined in Oracle. Otherwise you could insert invalid data in TimesTen and this would then fail to propagate to Oracle.
Chris

How to create database in timesten?

Please let me know how to create database in timesten as we create in Oracle 10g named orcl
Please guide in detail
Thanks.

Hi!
You can use TimesTen in standalone mode instead of Cache connect to Oracle.
If you have deployed TimesTen on Linux then you should make DSN in sys.odbc.ini which is located in info folder of TimesTen. If you are using Windows then you can use ODBC utility in control panel.
You can see the documentation of TimesTen for more detailed information.
/Ahmad

How to create table and digital signature ?

Hello,
I would like to ask two questions regarding SAP interactive forms by adobe.
1st question:
How to create table in interactive form?
Table that i can add rows and column and will show it in the form.
Example the rows and columns that i want:
ID: Name: DOB:
1 Jack 01/02/80
2 Ivy 10/12/82
2nd question:
How to create digital signature ?
I'm creating a adobe forms which need employee to sign on the form. I use signature field at my form. However, i don't know how to create a new signature and insert in the signature field.
Can any one provide the answer with step by step guide?
Thanks a lot

Hi Pradeepa,
you said you have your digital signature in
BMP format? That means Bitmap and would mean you are actually talking about a picture! THIS IS NOT A DIGITAL SIGNATURE!
A digital signature is a cryptographic key (aka public key cryptography) that is used to digitally sign a document, or at least a hash value derived from the document. Digitally signing means, applying the key in a well defined way (this is the algorithm used) to the document or hash value. You do this with your private key and the receiver of the document can then use your public key (which you can distribute in any way you want, even unsecure) to unencrypt the hash value. If this succeeds the receiver knows that the document was signed by you.
This is because both keys are mathematically related in such a way, that what one key encrypted can only be decrypted by the corresponding other key and by no other key. You even can´t decrypt a document with the same key it was encrypted with, this is the difference to symmetric encryption - please have a look at help.sap.com and search for digital signatures.
The named formats (afs, pfx and p12) are ways of coding the key, together with information about your person, such as email address and information about validity of the key into a
certificate. This type of certificate is then called a x.509 certificate and is the same you might have seen when connecting to a secure webserver such as the one of your bank website.
Signing a form with such a certificate provides for mathematically and therefore business related proove of a users identity.
In case you are really using a bitmap, this cannot work and would not serve you any good.
Ask yourself this question: I want to make sure that the form was signed by a specific person. How can I make sure that the signing can only be done by the person pretending to have done so?
A bitmap contains a picture, probably of the persons handwritten signature. How can I make sure that this picture was NOT recreated in MS Paint or Photoshop by someone else?
The answer is:
you can't! Therefore this way of prooving identity is useless.
You need to provide your users with digital signatures, put these in the certificate cache of your IE. If a user then clicks on the signing field, the private key is used to digitally sign the form - create a hash value of the form and encrypt it with the private key. After the form is send back to the server or you, you use the corresponding public key to decrypt the hash value and, as said above, if this succeeds, identity of the signer is proven.
THIS IS AN OVERSIMPLIFICATION! You might want to take a look at Adobe Reader Credentials.
Regards,
 Christian

How to create sidebars in wiki mountain lion

Hi,
Does anybody know how to create Sidebars in Wiki Mountain Lion 10.8?
Regards
Michael

Just an FYI.....
When the history is cleared, the cache is cleared as well. The favicons also go as a result of that process.
Barry

How to create cache?

Similar Messages

Maybe you are looking for