How to create current version variants for   report using RS_CREATE_VARIANT

Hi experts,
                  When i am using RS_CREATE_VARIANT to create a variant for a standard report then a message is coming that the 'Created variant is not of current version'. .How should i avoid this. If i want to create a variant of current version then what parameters have to populated in the FM.

Hi,
try these..
FASU_RS_CHANGE_CREATED_VARIANT change variant w/o selection screen - client dependent
FASU_RS_CREATE_VARIANT         create variant (w/o selection screen) - client dependent
Arunima

Similar Messages

  • How to create column selection variant for VA05?

    Hi Experts,
    How do I create column selection variant for VA05?
    Thanks,
    Sachin

    Hi,
    Goto SU3, enter user name and press enter
    goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
    Now check in VA05, you will get save button in active mode.
    Regards,
    Chandra

  • How to create a inline message for report region...

    Hi,
    Can any one pls tell me the document link for to create a inline error message for report region?
    im trying to do a dynamic validation for report region.i've manually created a report region with apex item.
    im searching it for long time, im cant able to find any demos or example.
    Pls help.....
    Thanks in advance...

    Any help???

  • How to create a multiplayer game for steam using flash/flex?

    Hi guys,
    We've got a multiplayer game ready to go. Currently it is not multiplayer, but we'd like to get it to a stage where it can be played over the steam network by users of steam and owners of steam games.
    We'd like to if anyone could briefly give us a breakdown of how to get out game up on steam and available for multiplayer?
    Does steam host servers, and can we utilise a steam server to transfer data between players or would we have to run our own server?
    Currently were using flash builder to publish via adobe air to a windows desktop exe. Can anyone briefly explain how - once a player has downloaded the game from steam we can connect two players? Does anyone know how to use actionscript 3 to access steam network?
    Anyone have any experience developing multiplayer turn based game for steam using flash /actionscript 3 /adobe air?
    Thanks for your help in advance,
    i

    You would want to use the SteamWorks API, which is available from Steam as a C++ library, but there is most likely an Adobe Native Extension (ANE) that would allow you to use the library in AS3.
    I've never used SteamWorks but it seems to support peer-2-peer matchmaking (in other words, you wouldn't even need your own server, I think.)
    SteamWorks API:
    https://partner.steamgames.com/documentation/api
    Search results for "SteamWorks AIR ANE":
    https://www.google.com/search?q=steamworks+air+ane
    -Aaron

  • How to create a data filter for BAPI used in a Distribution Model ?

    I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
    I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
    Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
    Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
    Thanks - Mike

    Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'.  But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter. 
    I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'.   Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI.  Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning.  Is this warning occuring because of missing configuration?
    Thanks - Mike

  • Set Variant for RHINTE00 using RS_CREATE_VARIANT

    HI All,
    I want to set variant only for employee id select option in report RHINTE00 using RS_CREATE_VARIANT. Since there is no direct access to Select Option so how can i achieve it.
    Thanks,
    Shailesh S. Malkar.

    Hi,
    Please reffer below code for implemeting 'RS_CREATE_VARIANT'
    *----- varid
      move sy-mandt             to i_varid-mandt.
      move 'RPCTXFU0'           to i_varid-report.
      move var_name1            to i_varid-variant.
      move sy-uname             to i_varid-ename.
      move sy-datum             to i_varid-edat .
      move sy-uzeit             to i_varid-etime.
      move 'A'                  to i_varid-environmnt.
    *----- varit
      move sy-mandt             to i_varit-mandt.
      move sy-langu             to i_varit-langu.
      move 'RPCTXFU0'           to i_varit-report .
      move var_name1            to i_varit-variant.
      concatenate 'Customer Variant'(o01) var_name1 into i_varit-vtext.
      append  i_varit.
          call function 'RS_CREATE_VARIANT'
             exporting
                  curr_report               = 'RPCTXFU0'
                  curr_variant              = var_name1
                  vari_desc                 = i_varid
             tables
                  vari_contents             = rsparams_tab
                  vari_text                 = i_varit
             exceptions
                  illegal_report_or_variant = 01
                  illegal_variantname       = 02
                  not_authorized            = 03
                  not_executed              = 04
                  report_not_existent       = 05
                  report_not_supplied       = 06
                  variant_exists            = 07
                  variant_locked            = 08
                  others                    = 99.
    Regards,
    Arun

  • How to create the Set ID for report writer

    Hi
    I am suppose to create the Set id . Please suggest me the t-code etc for creating set id.
    Thanks
    Shiv

    transaction for  creating the set ID GS01
    further, the menu path  in the application menu is
    information system->Ad Hoc Reports ->Report Painter ->Report Writer ->Set
    if helpful, plz assign point as way of thanks

  • How to create a custom transition for further use?

    Hi,
    I created a transition which looks like CoverFlow (like in iTunes): clip moving from full screen to the left hand side in a distorted position with a reflection underneath, then fading out while on the right hand side the new clip fades in and moves then to full screen. Looks rather nice...
    Instead of typing all the keyframed coordinates again and again, I would like to make it into an transition effect which I use just like all the other transitions.
    Is there a way to do this in FCP 5.1.4?

    Well...
    One way to do this would be to razorblade apart the actual keyframed portions of the outgoing clip, then past attributes> motion and filters

  • How to create a  temporary variant - urgent

    I suppose to schedule a batch job with a temporary variant or as a real variant. can anybody guide me how to create a temp. variant for a batch job..
    Thanks
    Thirumalairajan

    Hi Thirumal,
                      First run your program through se38. Then enter your values which u
                      want to use. Then save that by using the save button. Then goto
                      SE36 and define your job while defineing when you define the step
                      give the name of the program then down of that you will have an option
                      of giving the variant use f4 then it will show the value which you have
                      saved while executing the program through se38.Now save your job it
                      will run with the variant.
    Reward points if helpfull.
    Regards,
    Vamshi.

  • How to generate the ATR files for reports with out manually?

    Hi all,
    how to create the ATR files for reports in OBIEE 11g with out manually?
    is there any other method to create the ATR files by using the OBIEE Server?
    please provide me the solution for this?
    we are creating manually for each and every report, it is time taken process how can we generate ATR files automatically
    by using the OBIEE Server?
    Thanks,

    Hi,
    I am afraid not.ATR are attributes files contains the object's full name, access controllist (ACL), description, and so on.Each catalog object has a corresponding attributes file, I am not sure why do you have to generate the atr files.In case you need info about atr files: http://businessdecisionsystems.com/blog/?p=7
    If you have huge number of similar reports(with filter variations and same kind of layout), try to play around with the xml to minimize the development effort.
    Rgds,
    Dpka
    Edited by: Dpka on Oct 4, 2011 12:00 AM

  • How do we create a variant for report which runs in the background?

    Hi,
    I want to create a report which will have some variants and will be running in the background?
    The main intention is to transfer the data from one database into another. Please explain the step by step process.
    Regards
    Amit

    Hi Amit,
          When you run a report program in foregorund(If you have a selction-screen), by pressing F8 button, it takes you to the screen where when you press execute button, the report is executed.
          In this screen, you can enter the requirec values which you wish to store in the variables in the selection-screen and press SAVE button, then a variant will be created. You can create the required variants for your report and then when executing the same report in background, the process goes in this way,
    Go to SE38->Program-> Execute->Background, there you can give the variant name and press EXECUTE IMMEDIATELY and your program runs in background for the given variant.
    Hope this is helpful to you. If you need further information, revert back.
    Reward all the helpful answers.
    Regards
    Nagaraj T

  • How to create a new variant and a job sheduled to use it for the ......

    How to create a new variant and a job sheduled to use it for the exisisting programs

    Hi
    1. The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
    standardized format. The list data is displayed as a table on the screen.
    The ALV Grid Control offers a range of interactive standard list functions that users need
    frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
    export list (in different formats), and so on. These functions are implemented in the
    proxy object class. You as the programmer have the possibility to turn off functions not
    needed. In most cases the implementations of the standard functions provided by the
    control are sufficient. However, if required, you can adjust these implementations to
    meet application-specific needs.
    You can add self-defined functions to the toolbar, if necessary.
    The ALV Grid Control allows users to adjust the layout of lists to meet their individual
    requirements (for example, they can swap columns, hide columns, set filters for the
    data to be displayed, calculate totals, and so on). The settings (list customizing) made
    by a specific user are called a display variant. Display variants can be saved on a userspecific
    or on a global basis. If such display variants exist for a list, they can be offered
    to the user for selection. If a display variant is set as the default variant, the associated
    list is always displayed based on the settings of this variant.
    2. REUSE_ALV_LIST_DISPLAY
    REUSE_ALV_GRID_DISPLAY
    REUSE_ALV_FIELDCATALOG_MERGE
    REUSE_ALV_COMMENTARY_WRITE
    3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
    6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
    7.fieldcat-fieldname
    fieldcat-ref_fieldname
    fieldcat-tabname
    fieldcat-seltext_m
    5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
    Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
    In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
    The report output can contain up to 90 columns in the display with the wide array of display options.
    <b>The commonly used ALV functions used for this purpose are;</b>
    1. REUSE_ALV_VARIANT_DEFAULT_GET
    2. REUSE_ALV_VARIANT_F4
    3. REUSE_ALV_VARIANT_EXISTENCE
    4. REUSE_ALV_EVENTS_GET
    5. REUSE_ALV_COMMENTARY_WRITE
    6. REUSE_ALV_FIELDCATALOG_MERGE
    7. REUSE_ALV_LIST_DISPLAY
    8. REUSE_ALV_GRID_DISPLAY
    9. REUSE_ALV_POPUP_TO_SELECT
    Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
    But either no.7 or No.8 is there in the Program.
    <b>
    How you call this function in your report?</b>
    After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
    Then use follwing function module.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = 'Prog.name'
    I_STRUCTURE_NAME = 'I_ITAB'
    I_DEFAULT = 'X'
    I_SAVE = 'A'
    TABLES
    T_OUTTAB = I_ITAB.
    IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
    ENDIF.
    ENDFORM. " GET_FINAL_DATA
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70. Each of the
    activities 01, 02 and 70 controls the availability of particular
    functions (in the menu and the toolbar) of the ALV line item list:
    a) 01: "Settings -> Display variant -> Save..."
    b) 02: "Settings -> Display variant -> Current..." and
    "Settings -> Display variant -> Current header rows "
    c) 70: "Settings -> Display variant -> Administration..."
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: The user can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    Now if you want to permit a user to change the column selection and
    the headers as well as to save the layout thus created, for example,
    but if you do not want to permit the user to administrate the
    layouts, you grant him or her the authorization for activities 01
    and 02.
    Check this link it will be mosty usefull for u
    http://www.sap-img.com/fu017.htm
    Reward all helpfull answers
    Regards
    Pavan

  • I have creative cloud, I have both photoshop and lightroom current versions installed - I was using the trial period.  I paid for the 9.99 a month and now I'm trying to figure out how to get a current program so it won't expire - which is still says it is

    I have creative cloud, I have photoshop and lightroom current versions installed - I was using the trial period.  I paid for the 9.99 a month and now I'm trying to figure out how to update this. 

    You need to uninstall the trial applications and reinstall from the CC app.

  • How to get the spool id or how to create a spool id for the report .

    hi,
    how to get the spool id or how to create a spool id for the report .
    this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
    my requirement is to download a pdf file from the alv grid list.

    Hi Raghu,
    Execute this program.
    REPORT  ZTEST_3318                              .
    tables: usr01.
    perform send_report_to_spool.
    *&      Form  send_report_to_spool
          text
    form send_report_to_spool.
      data: loc_dest like pri_params-pdest,
            wf_listname type char12,
            wf_listtext like PRI_PARAMS-PRTXT,
            wf_copies type i,
            wf_days type i,
            wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
            wf_valid type c.
      clear : wf_listname , loc_dest , wf_listtext .
      move: 'AP interface' to   wf_listname .
      move: 'AP interface' to   wf_listtext .
    select single spld into usr01-spld from usr01 where bname eq sy-uname .
      if sy-subrc eq 0 .
        move: usr01-spld to loc_dest .
      endif .
      call function 'GET_PRINT_PARAMETERS'
        EXPORTING
          destination    = loc_dest
          copies         = 1
          list_name      = wf_listname
          list_text      = wf_listtext
          immediately    = ' '
          release        = ' '
          new_list_id    = 'X'
          expiration     = 1
          line_size      = 200
          line_count     = 65
          layout         = 'X_65_200'
          sap_cover_page = 'X'
          receiver       = 'SAP*'
          department     = ''
          no_dialog      = 'X'
        IMPORTING
          out_parameters = wf_params
          valid          = wf_valid.
      if wf_valid <> space.
        new-page print on parameters wf_params no dialog.
        perform write_summary .
        new-page print off.
      endif .
    endform.                    "send_report_to_spool
    *&      Form  write_summary
          text
    -->  p1        text
    <--  p2        text
    FORM write_summary .
    data: begin of itab occurs 0,
          matnr type matnr,
          end of itab.
    select matnr
           from mara
           into table itab
           up to 10 rows.
    loop at itab.
    write: / itab-matnr.
    endloop.
    ENDFORM.                    " write_summary
    This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
    After that use that spool for your purpose.
    If Useful award point

  • How to create a Transaction code for a Report Painter Report

    Hi All,
    Can any one let me know the procedure as to how to create a t-code for a user defined PCA report. I have created a PCA report (copied the existing report (8a26-001) and named it as zpca and assigned the same in a new Report Group ZPCA (the group is created by copying 8a26 group) and assigned it under the library 8a2. We have added few fields required by the user to the Z report.
    Now i need to create a transaction code for that zpca report. can anyone suggest how to go about it.
    Useful answers will be appropirately rewarded.
    regards,
    radhika

    Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
    Name of screen field:                               Value
    D_SREPOVARI-REPORTTYPE                RW
    D_SREPOVARI-REPORT                        ZPCA
    Save and transport accordingly.

Maybe you are looking for