How to create Custom LabVIEW Node with Dynamic Pins?

I am trying to create a new set of LabVIEW nodes that will communicate with a new protocol.
If it's at all possible, I'd like to make the new nodes similar to other connnectivity nodes (i.e. ActiveX, .NET, etc...). There would be an Open Reference node that pops up a custom dialog when created, a Close Reference node, a Property node that dynamically changes when the reference pin changes, and an Invoke node that dynamically changes when the reference pin changes.
Is it possible to create such nodes as sub-VI's? If so, then how? If not, then what is the prefered method of doing this?
Thanks in advance for any help
VRMan

The technique to do exactly this is called XNode. It's very difficult, not
supported or documented, and although they work in >7.1, you have to use
scripting a lot, and that is not supported in 8.x. The technique used in 7.1
is also preceded. I would really not recommend it. Search LAVA if you need
to know more.
You could do this with XControls. These technique might not do 100% what you
want, but at least they are supported. Haven't used LabVOOP (search class or
classes in the LV help, there are instruction tutorials and videos), but I
think you can't make property nodes and methods. I'm sure XControls can do
that. Both are advanced stuff...
A third option is to make an express VI, that is configurable by double
clicking on it. Don't like to use them myself, and therefore haven't make
any. I think you need a toolkit to make them.
Regards,
Wiebe.

Similar Messages

How to create custom BOL object for dynamic query in CRM 7.0

Hi,
Could anyone please explain me with steps that how to create the custom BOL object for dynamic query in CRM 7.0, I did it in previous version but its throwing exception when i try to create the object of my dynamic query class. I just defined the entry of my in crmv_obj_btil to create the dynamic query BOL object. do i need to do any other thing also to make it work?
Regards,
Kamesh Bathla
Edited by: Kamesh Bathla on Jul 6, 2009 5:12 PM

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

How to Create Custom Content Type with 100 site columns ?

Hi EveryOne,
i have one requirement to create custom conten types in sharepoint 2013 as follows.
1. Create a content type with 100 site columns ( in this 100 site columns includes 10 mms feilds and 10 lookup fields).
2.when we deploy the content type in other server if already the same content type existing in the server it should be upgrade the existing content type.
Please advise how do develop the solution ( using power shell script or visual studio with event receiver or xml file)
Regards,
Srinivas

Try below:
http://www.mindfiresolutions.com/Add-Columns--Fields-Programmatically-to-a-SharePoint-List-282.php
using(SPSite
oSPsite = new SPSite("http://Web-URL"))
    oSPsite.AllowUnsafeUpdates =
true;
using (SPWeb oSPWeb = oSPsite.OpenWeb())
        oSPWeb.AllowUnsafeUpdates =
true;
/* get the SPList object by list name*/
SPList lst = oSPWeb.Lists["EmpList"];
/* create a Numeric field for EmpID */
SPFieldNumber fldEmpID = (SPFieldNumber)lst.Fields.CreateNewField(
SPFieldType.Number.ToString(),
"EmpID");
       fldEmpID.Required =
true;
        fldEmpID.DisplayFormat =
SPNumberFormatTypes.NoDecimal;
/* create a Text field for Name */
        SPFieldText fldName = (SPFieldText)lst.Fields.CreateNewField(
SPFieldType.Text.ToString(),
"Name");
        fldName.Required =
true;
        fldName.MaxLength = 50;
/* create a Date field for Dob*/
SPFieldDateTime fldDob = (SPFieldDateTime)lst.Fields.CreateNewField(
SPFieldType.DateTime.ToString(),
"Dob");
        fldDob.DisplayFormat =
SPDateTimeFieldFormatType.DateOnly;
/* create a Currency field for Salary */
        SPFieldCurrency fldSal = (SPFieldCurrency)lst.Fields.CreateNewField(
SPFieldType.Currency.ToString(),
"Salary");
        fldSal.Currency =
SPCurrencyFieldFormats.UnitedStates;
        fldSal.DisplayFormat =
SPNumberFormatTypes.TwoDecimals;
/* add the new fields to the list */
        lst.Fields.Add(fldEmpID);
        lst.Fields.Add(fldName);
        lst.Fields.Add(fldDob);
        lst.Fields.Add(fldSal);
/* finally update list */
        lst.Update();
        oSPWeb.AllowUnsafeUpdates =
false;
    oSPsite.AllowUnsafeUpdates =
false;
If this helped you resolve your issue, please mark it Answered

How to create a data connection with dynamic XML file?

Thanks for all reply first!
I have formatted the submitted data into an XML file on the server side,this file can be import to PDF form correctly.
I try to send this XML file to the user to let him can review what he has submitted.
I guess that I should create a data connection to the XML file so that it can be reviewed by the user.
But the question is that the XML file is dynamic generated.
How can i do?
give me some clus or examples,please.
thanks,
Jasper.

Hi Jasper,
To show user back the result, you can use PDF instead of XML. You can store the PDF template in server and you can merge XML data with PDF template by Livecycle Form Data Integration service.
We, as KGC, can generate huge number of Adobe Livecycle forms in small periods. Also we give consultancy on Adobe Livecycle ES products and Adobe Livecyle Designer. In case of any need, do not hesitate to contact us.
Asiye Günaydın
Project Consultant
KGC Consulting Co.
www.kgc.com.tr

How to create a Type Object with Dynamic select query columns in a Function

Hi Every One,
I'm trying to figure out how to write a piplined function that executes a dynamic select query and construct a Type Object in order to assigned it to the pipe row.
I have tried by
SELECT a.DB_QUERY INTO actual_query FROM mytable a WHERE a.country_code = 'US';
c :=DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c,actual_query,DBMS_SQL.NATIVE);
l_status := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt LOOP
DBMS_SQL.DEFINE_COLUMN(c,j,v_val,2000);
END LOOP;
FOR j in 1..col_cnt LOOP
DBMS_SQL.COLUMN_VALUE(c,j,v_val);
END LOOP;
But got stuck, how to iterate the values and assign to a Type Object from the cursor. Can any one guide me how to do the process.
Thanks,
mallikj2

Hi Justin,
First of thanks for your reply, and coming to my requirement, I need to report the list of items which are there in the dynamic select statement what am getting from the DB. The select statement number of columns may vary in my example for different countries the select item columns count is different. For US its '15', for UK it may be 10 ...like so, and some of the column value might be a combination or calculation part of other table columns (The select query contains more than one table in the from clause).
In order to execute the dynamic select statement and return the result i choose to write a function which will parse the cursor for dynamic query and then iterate the values and construct a Type Object and append it to the pipe row.
Am relatively very new for these sort of things, welcome in case of any suggestions to make it simple (Instead of the function what i thought to work with) also a sample narrating the new procedure will be appreciated.
Thanks in Advance,
mallikj2.

How to create treeControl's node with DynamicViewObject & Link?

Thanks for your help.

The technique to do exactly this is called XNode. It's very difficult, not
supported or documented, and although they work in >7.1, you have to use
scripting a lot, and that is not supported in 8.x. The technique used in 7.1
is also preceded. I would really not recommend it. Search LAVA if you need
to know more.
You could do this with XControls. These technique might not do 100% what you
want, but at least they are supported. Haven't used LabVOOP (search class or
classes in the LV help, there are instruction tutorials and videos), but I
think you can't make property nodes and methods. I'm sure XControls can do
that. Both are advanced stuff...
A third option is to make an express VI, that is configurable by double
clicking on it. Don't like to use them myself, and therefore haven't make
any. I think you need a toolkit to make them.
Regards,
Wiebe.

Create customer master record with reference to existing division

how to create customer master record with reference to existing division?

what type of reports sd consultant configure in implementation project?and in supporting project?

Creating context node with dynamic type

When we are creating context node thru wizard, Dictionary type must be filled. I'm trying to create Context node manually.Did any one tried created Context node class with Dynamic type.

Hi Prasad,
I have a similar requirement.
Can you please share with me how did you create context node with dynamic table data?
Thanks
Vicky

How we create custom infotype and how to configure with its subtypes.

hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumar

Hi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screenSelect `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appearshere you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha.

How to create a navigation bar with custom made buttons?

I'm used to work with a similar program as Muse. In there we can create a single button and link them together into a navigation bar. I have tried all sorts of tutorials but none of them is discussing this possibility.
To summorize. The idea is to create a button in photoshop and to use this as a theme to build a navigation bar. Possible or not and how? Thanks for assistance. Rgds Rufin

Hi Brad,
Thanks for your reply.
No, not really. I used to work with XARA up till now. And being an Adobe Cloud user I think it a bit silly using two different systems. In XARA I can create a custom button and turn them into a navbar. For your information I include a few links to sites I created with Xara and I would like to know if I can create the same type of navbars with Abobe Muse. I already found out that all the other functions are available and some work a lot better in Muse, but I’m stuck on the navbar issue. I know I can create a button in Adobe PS and use it in Muse. But I didn’t manage to figure out how to create a navbar in Muse on basis of a button created in PS.
www.restaurant-cedric.be or www.discoamigo.com or www.radioparadijs.be
Grtz,
Rufin
LOGO-RUFIN'S-REISBUREAU-outlook
Koningslaan 36 – b31
8300 Knokke – Heist
Tel: 050621052
Fax: 050621072
e-mail: <mailto:[email protected]> [email protected]
<http://www.rufins.be/> http://www.rufins.be
<http://www.travelcoop.be/> travelcoop_logo_2013[1] <http://ferventreisagent.be/rufins-reisbureau> klein logo
Van: Brad Lawryk
Verzonden: zondag 12 oktober 2014 19:40
Aan: RUFIN DUWEL
Onderwerp: How to create a navigation bar with custom made buttons?
How to create a navigation bar with custom made buttons?
created by Brad Lawryk <https://forums.adobe.com/people/Brad+Lawryk> in Help with using Adobe Muse CC - View the full discussion <https://forums.adobe.com/message/6817739#6817739>

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create custom content placeholder in sharepoint 2013

Hi, I would like to create custom content placeholder don't know how to and add to my custom master page in sharepoint 2013. I have no luck searching on how to create custom content placeholder, any help?
Thanks,
Johnweb

Hi,
If you’re not fixed your requirement with the Out of the box SharePoint place holders, you can create as many as you want as long as the ID doesn’t conflict. On the master page add the content place holder
<asp:ContentPlaceHolderid="CustomName" runat="server"></asp:ContentPlaceHolder> and add this to your page layout
<asp:Contentrunat="server" ContentPlaceHolderID="CustomName"></asp:Content>.
I suggest you provide your basic requirement for further research.
If you want to customize a master page, the Rajendra's method would be helpful.
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to create a MD form using dynamic page ?

Rahul and Sharmila,
You have answered several of my queries earlier and I am thankful for them.
I have been trying to creating a MD form using dynamic page and I haven't fiqured it out. I need help. You both advised me on creating a simple form using dynamic page. The complexity changes drastically when I have to create a MD form. Has no body ever tried to create a MD form with dynamic page?
I haven't heard from you anything either. I am stuck with this and I need help urgently. Would you kindly tell me if this is possible and how ? Otherwise, I will stop crying for help on this.
Thanks for your kind attention.
Mainak

Hi,
I have replied to this in the morning.
Re: Oracle portal and JSR 168 compliance
Hope it helps.
Thanks,
Sharmila

How to create Custom LabVIEW Node with Dynamic Pins?

Similar Messages

Maybe you are looking for