How to create database link between oracle9i database and oracle10g

How to create database link between oracle9i database and oracle10g
oracle9i database name "Prod" windows server 2003 ( 172.x.x.x)
oracle10g database name "TEST" sun solaris 9 (165.x.x.x.x)
Please help me on this

For connections between 10.2 and 9.2 the 9.2 end MUST be at 9.2.0.4 or higher. Connections between 10.2 and 9.2.0.1, 9.2.0.2 or 9.2.0.3 are not supported.
Connections between 10.2 and 9.0.1 was never been supported.
Cheers !!!!
Bhupinder

Similar Messages

How to create a link between database schema?

Hi,
I have created database link between two database schema (From DBSchema2 i have created database link for DBSchema1). From DBSchema2, i have quried one table (This table is present in DBSchema1). But it throws an error says that Table or View does not exist. Anyone pls tell the detailed way to create database link between schema??
Thanks,
Sathish kumar D

Yes iam trying to Archive
I said achieve not archive. Anyways so you are trying to archive the data. Can you just detail your requirement ? What exactly do you want ?
Only few tables will be moved to Archive Schema and other foriegn key tables will have a reference to the Live Schema. So how i can create the link between the Archive Schme to Live schema?
There is no question of creating database links between 2 schems. It is pure stupidity. If you want to access any object from another schema grant proper privileges and create a synonym for the object. Database links are not meant for this purpose.
Amardeep Sidhu
http://www.amardeepsidhu.com

How to create a link between 2 cells in different spreadsheets?

when using numbers on MacBook Pro/IOS X - how to create a link between 2 cells in different spreadsheets?

In the cell where you want the duplicate data to appear from another sheet/table do the following:
type the equal sign ("=") then click the cell you in the sheet table while contents you want to appear in the cell where you just typed the equal sign"
it reads "The cell I click equals the result of the formula or the contents of the next cell I click"

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

API to create a link between Sales order and Requisition

We are upgrade 11i to R12. We have a custom drop ship process. We have a original SO and through the sales order we create a Reqisition. We send the requisition details to the factory and the factory sends us a flat file with the quantity shipped and dates. There might be multiple lines for each requisition received. We will add the details to the SO and update the Requision with the flat file details for the SO shipment. But We will have to create a link between the SO and the requisition. Is there an API to do the linking between a SO and A requisition line?

I created a SO and a requisition
declare
p_rsv inv_reservation_global.mtl_reservation_rec_type;
p_dummy_sn inv_reservation_global.serial_number_tbl_type;
x_msg_count NUMBER;
x_msg_data VARCHAR2(240);
x_rsv_id NUMBER;
x_dummy_sn inv_reservation_global.serial_number_tbl_type;
x_status VARCHAR2(1);
x_qty NUMBER;
l_inventory_item_id number;
l_source_header_id number;
l_reservation_qty number;
l_error_message VARCHAR2(300);
l_order_number NUMBER;
begin
fnd_global.APPS_Initialize(1131,50654,660);
p_rsv.reservation_id := NULL;
p_rsv.requirement_date := to_date('30-JUN-2012','DD-MON-YYYY');
p_rsv.organization_id := 88; ---ship_from_org_id
p_rsv.inventory_item_id := 147001; --inventory_item_id
p_rsv.demand_source_type_id := inv_reservation_global.g_source_type_oe;
p_rsv.demand_source_name := NULL;-------'SALES ORDER';
p_rsv.demand_source_header_id := 27005; --- sales order header id
p_rsv.demand_source_line_id := 29010; --- sales order line id
p_rsv.primary_uom_code := 'EA';
p_rsv.primary_uom_id := NULL;
p_rsv.reservation_uom_code := 'EA';
p_rsv.reservation_uom_id := NULL;
p_rsv.reservation_quantity := 200;
p_rsv.primary_reservation_quantity := 200;
----p_rsv.supply_source_type_id := inv_reservation_global.g_source_type_internal_req;
p_rsv.supply_source_type_id :=inv_reservation_global.g_source_type_inv;
p_rsv.supply_source_header_id :=18001; -- requisition header id
p_rsv.supply_source_line_id :=12172; -- requisition line id
p_rsv.supply_source_name := NULL;
p_rsv.supply_source_line_detail := NULL;
p_rsv.autodetail_group_id := NULL;
p_rsv.external_source_code := NULL;
p_rsv.external_source_line_id := NULL;
p_rsv.supply_source_line_detail := NULL;
p_rsv.revision := NULL;
p_rsv.subinventory_code := NULL;
p_rsv.subinventory_id := NULL;
p_rsv.locator_id := NULL;
p_rsv.lot_number := NULL;
p_rsv.lot_number_id := NULL;
p_rsv.pick_slip_number := NULL;
p_rsv.lpn_id := NULL;
p_rsv.attribute_category := NULL;
p_rsv.ship_ready_flag := NULL;
p_rsv.demand_source_delivery := NULL;
p_rsv.attribute1 := NULL;
p_rsv.attribute2 := NULL;
p_rsv.attribute3 := NULL;
p_rsv.attribute4 := NULL;
p_rsv.attribute5 := NULL;
p_rsv.attribute6 := NULL;
p_rsv.attribute7 := NULL;
p_rsv.attribute8 := NULL;
p_rsv.attribute9 := NULL;
p_rsv.attribute10 := NULL;
p_rsv.attribute11 := NULL;
p_rsv.attribute12 := NULL;
p_rsv.attribute13 := NULL;
p_rsv.attribute14 := NULL;
p_rsv.attribute15 := NULL;
inv_reservation_pub.create_reservation
p_api_version_number => 1.0
, x_return_status => x_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_rsv_rec => p_rsv
, p_serial_number => p_dummy_sn
, x_serial_number => x_dummy_sn
, x_quantity_reserved => x_qty
, x_reservation_id => x_rsv_id
IF x_status='S' THEN --- HARD RESERVATION IS DONE SUCCESFULLY ---
dbms_output.put_line('reservation succesful');
dbms_output.put_line('reservation id: || x_rsv_id');
ELSE
if(nvl(x_msg_count,0) = 0) then
dbms_output.put_line('no message return');
else
for I in 1..x_msg_count LOOP
l_error_message := fnd_msg_pub.get(I, 'F');
end LOOP;
end if;
--- HARD RESERVATION API fails ---
dbms_output.put_line('Reservation API Error Message: '||l_error_message);
END IF;
EXCEPTION
WHEN OTHERS THEN ------------------ In case of any pl/sql error
l_error_message := SQLERRM;
dbms_output.put_line('Plsql Error Message: '||l_error_message);
END;
but i am getting an error
"Reservation API Error Message: INV_RSV_DS_SO"
I am stuck and no idea how to fix this. Any help is appreciated.
Edited by: 901524 on May 23, 2012 1:26 PM

Database link between the databases with the same name

Hi,
I need to establish a db link between two databases that are named the same way on two different servers.
server 1 has a database dev1 and server2 has a database dev1. The tnsnames on server2:
DEV1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = server2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = DEV1)
DEV1_server1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = dev1)
Can anyone let me know a way to create a database link between the two above?
Thanks.

Hi,
Am not sure what problem you are facing in creating a db link
create database link dev1_server1 connect to x identified by x using "dev1_server1"
create database link dev1_server2 connect to x identified by x using "dev1_server2"where dev1_server1 and dev2_server2 are the tns entry in tnsnames.ora file of server2 and server1 respectively.
Regards
Anurag

How to remove the link between Profile name and corp net account after their disassociation

Hi there,
How do I remove the link between Profile name and corp net account after their disassociation ?
I would like to make remove the link between 'Viv Lingaiah' and
[email protected] Also, I would like to keep 'Viv Lingaiah' and associate with my outlook id and corpnet account.

Logon to your live account here
https://account.live.com/summarypage.aspx then under aliases you can add an alias and promote it to primary.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Database links between Oracle 10G and 7.1/7.3 & 8.0 databases

Hi All..
Unfortunately one of our customers is still using very very old unsupported versions of the database - 7.1 and 7.3 and 8.0. They wish to start an upgrade process - moving up to 10G (via staged upgrades) but wish to know whether they can still access information from old databases via database links.
I know that the Oracle 10G client cannot connect to database versions this old, and I am presuming that the database itself cannot via DB links but I thought it wise to check.
Any help appreciated. Thank you.

Oracle 10.1 is certified to connect to 8.1.7 and later. Database links to earlier versions are not certified and generally do not work.
The general solution to this sort of thing tends to be putting an older version of the database (8.1.7 or 9.0.1, usually) between the ancient databases and the new database. 10.1 can create a database link to 9.0.1. 9.0.1 can create a database link to 7.3.4 and create views that reference remote 7.3.4 objects that the 10.1 system can query. Of course, you're taking data over the network twice, so performance isn't ideal, but it can work in a pinch.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Database link between Oracle 11g and MS Sql Server 2005 EE

Hi everybody,
I trying to create database link from Oracle 11g to MS Sql and I'm not succesful.
I found tutorial for Oracle 10g, but it does't work.
I created odbc data source, then I modified tnsnames.ora and listener.ora, then I created initkw.ora in HS directory and then I created dabase link, but it does't work.
Can you help me please? Thanks for help ... ondra
Tnsnames.ora:
KW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = tcp)(HOST = oracle_ip)(PORT = 1521))
(CONNECT_DATA =
(SID = KW)
(HS = OK)
listener.ora:
(SID_DESC =
(SID_NAME = KW)
(ORACLE_HOME = C:\oracle\product\11.1.0\db_1)
(PROGRAM = hsodbc)
initkw.ora
HS_FDS_CONNECT_INFO = kw
HS_FDS_TRACE_LEVEL = 0
HS_FDS_TRACE_FILE_NAME = kw.trc
create public database link KW connect to "user" identified by "pass" using 'KW';
Message was edited by:
user598176

Hi, I get two errors.
ORA-28545 - NET8 mistake Unable to restrieve textof NEWTWORK/NCR message 65535
and then ORA-02063
zenda
I resolved one of error, I have wrong ip.
But now I have another error:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC][Microsoft][ODBC Driver Manager] Data source name
not found and no default driver specified (SQL State: IM002; SQL Code: 0)
I have ODBC data source in system DSN
PS: Our Oracle 11g database is 64 bit version
Message was edited by:
user598176

How to create Doc Link between two document numbers?

Hi Folks,
I have two document numbers with different transaction type.
I want to create a Document link between these two documents, i.e. each documents should come in Dock Flow of each other.
How to acheive this target.
I tried to do it by using FM CRM_DOC_FLOW_MAINTAIN_OW, but not able to achieve it.
So please tell me how to do this thing.
Regards
PG

Hi PG,
The FM CRM_DOC_FLOW_MAINTAIN_OW should work , I am not sure what parameters you are passing. Any way you can use the CRM_ORDER_MAINTAIN as well which will eventually call CRM_DOC_FLOW_MAINTAIN_OW . Have a look of the sample code, This will give you some idea
lw_input_field_names-fieldname = 'GUID'.
      INSERT lw_input_field_names INTO TABLE lt_input_field_names.
      CLEAR lw_input_fields.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_h.
      lw_input_fields-objectname = gc_object_name-orderadm_h.
      lw_input_fields-ref_guid    = lw_orderadm_h1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_h-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-header_header.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_h1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_h.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CLEAR lw_input_fields.
      REFRESH lt_doc_link1.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_i.
      lw_input_fields-objectname = gc_object_name-orderadm_i.
      lw_input_fields-ref_guid    = lw_orderadm_i1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_i-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-item_item.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_i1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_i.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        CHANGING
          ct_orderadm_h     = lt_orderadm_h1
          ct_input_fields   = lt_input_fields
          ct_doc_flow       = lt_doc_flow1
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RAISE error_occurred .
      ENDIF.
Hope this will help.
Thanks,
Vikash.

Query Builder - How to create a link between tables with many fields?

I have many fields in my tables. When the query builder loads the tables, the tables are expanded to accomodate all the fields. Suppose I want to link Table A's Customer ID (the first field in Table A) wiith Table B's Customer ID (the last field in Table B). How can I do that if the last field in Table B are not visible in the screen?
Currently, I create a link in Table A's customer with a random field in Table B. Then I edit the link to create a proper condition. Is there a more efficient way to do this?
Thanks.
Edited by: woro2006 on Apr 19, 2011 9:40 AM

Hi woro2006 -
Easiest way is to grab Table A's title bar & drag Table A down the page until the columns you want to link are visible.
FYI, there is an outstanding bug
Bug 10215339: 30EA1: MISSING THE 2.1 RIGHT CLICK OPTIONS ON DATA FIELDS TO CREATE A LINK
to add a context menu on the field for this. That is, Link {context field} to > {other data sources} > {fields from that source}
It is being considered for 3.1, but I have no idea where it will end up in the priority queue.
Brian Jeffries
SQL Developer Team
P.S.: Arghh, Unfortunately, I just tried it and the diagram does not auto scroll while you drag, so there is some guess work/repositioning the view involved.
Logged Bug 12380154 - QUERY BUILDER DIAGRAM DOES NOT AUTO SCROLL WHEN DRAGGING TABLE

How to create hypertext links between various text within a Pages document?

I have documents with paragraphs or sentences that are usually numbered like within a constitution, legal document or biblical text and then later in the document want to link back to the text. How do I create those links within Pages?

Not supported with Pages v5.5.2 on Yosemite. Document bookmarks are available in the older, but far more powerful Pages '09 v4.3.

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

How to create a connection between EP-Portal and BW system

Hi friends ,
Can you pl expalin me How ro connect EP to BW ,I have created an Iview in the portal to get some BW data using BSP application .How to assign Iview to system object ? and what are parameters i need to give in the system object .
Thanks,
Sunitha Reddy

Probably better asked in the PORTAL forum. But anyways...
Create iView for BI.
Assign BI iView the ALIAS of your BI system (this assumes you created a BI system object previously and assigned it an alias)
Just that easy.
If you are on BI 7, then your BI might have it's own portal and you can create a federated portal network between BI and your portal. It works GREAT and is easy as cake.

How to create database link between oracle9i database and oracle10g

Similar Messages

Maybe you are looking for