How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?
Sir,
How to create db conn for JDBC-ODBC Bridge for MS Access in ADF APP?
Regards
Hello Every Body!
I succeeded in getting connect to the ms access database in adf application in jdeveloper as below:
First in control panel to to admin tools and go to data source(odbc) and create system dsn as bellow pic
Then go to jdeveloper resources ide conn and then database and new database conn and then select jdbc-odbc briddge and then give custom jdbc url as bellow pic
Cheers
tanvir
Similar Messages
-
hi,
how to create user dsn for microsodt access driver(*.mdb,*.accdb) using command line in 64 bit.
i have installed 64 bit drivers and when use following command
C:\Windows\System32>odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259
but it works with C:\Windows\SysWow64yes i have installed Microsoft Access Database engine 2010 redistributale => AccessDatabaseEngine_x64.exe
i can able to create user dsn using odbccad32.exe in system32 folder but using command line its not working
C:\Windows\System32>
odbccad.exe CONFIGDSN "Microsoft Access Driver (*.mdb,*.accdb)" "DSN=GLDatabase|Description=GL Data Source|DBQ=C:\DataBase\1.mdb"
CONFIGDSN:'unable to create a datasource for the "Microsoft Access Driver (*.mdb,*.accdb)" component not found in the registry with the error code -2147467259 -
How do I get the SUN jdbc-odbc bridge to work?
Hi,
I'm trying to us the SUN 1.2 jdbc-odbc bridge on Oracle 8.
I have installed the ODBC driver from www.intersolv.com
(Merant) and have successfully tested it.
I have SUN 1.2 installed and verified that
the sun JdbdOdbcDriver is in my CLASSPATH.
My driver path is:
sun.jdbc.odbc.JdbcOdbcDriver
My url is
jdbc:odbc:Oracle8
my odbc.ini is correct, and my ODBCINI is set.
when I try to connect I get "No suitable driver".
The SUN documentation indicates this error means
my shared libraries aren't correct, but I have
verified my ODBC setup with a odbc demo app.
Any suggestions on how to form my url?
Has anyone used the bridge on Solaris?
nullThe display is just too dim. I tried the brightness and backlight settings and these do not work. This has been like this since I bought it. Never bothered to deal with it before and just made do with reading a very dim menu.
-
How to create a networkdrive for external access?
i am using an iMac with a time capsule. There is an internet access availbale. the iMac and time capsule are connected via WLAN.
now I would like to create a network drive which can be accessed from the internet either by my laptop or iPad and iPhone.
what do i have to do to create this access?
Please peovide some inside.
Thank youi am using an iMac with a time capsule. There is an internet access availbale. the iMac and time capsule are connected via WLAN.
now I would like to create a network drive which can be accessed from the internet either by my laptop or iPad and iPhone.
what do i have to do to create this access?
Please peovide some inside.
Thank you -
JDBC-ODBC Bridge Performance To MS Access
Hey all, I'm running a Java app that extracts an entire table (set of tables) from Oracle and copies them into Access. The easiest implementation has been to use a DSN-less Type 1 JDBC-ODBC bridge connection to Access, but unfortunately the inserts are taking too long.
I have tried both Statement and PreparedStatement approaches, with both single row and batch updates. Some of the performance times, relative to the computer I am on (PIII 1 gHz with 256 RAM), are as follows:
Via Batch, about 8min, 15 seconds per 10,000 rows.
Via Single Row updates/inserts, about 52 minutes for 45,000 rows.
I've tried alot of varieties with batch, but 10,000 seemed to be the best. The largest table is only 45,000 rows (right now), but has the potential to grow much larger (obviously). This application needs to backup 4 databases, each with N tables (current N=7, but will expand). I'm trying to knock down the times and increase performance, but am not sure what is "reasonable" for Type 1 connections with JDBC. I've seen third party drivers, Type 3, for Access...but don't want to run the middle tier server for filtering request through. I'd rather use Type 4, but can't seem to find any for Access.
Any suggestions? Recommendations? Let me know! Thanks all! :)Hi,
If its a backup/batch process why are you worrying about performance, its only an offline process :) even if has to be triggered during an OLTP run this task asynchronously.
I dont know why you have chosen java to do this ??? any way prepared statements with non scrollable resultsets will increase you performance better tha scrollable normal statements.
Rajesh -
How to Create a datatype for a storeprocedure which has got array ?
Hi All,
Please tell me how to create a datatype for a storeprocedure which has got an array structure ?
Thanks,
Sindhu.Hi Sindhu.
You would have to use a JDBC Cursor for this but it's possible only Output parameters, not Input parameters.
It's describle in a help link:
Defining an EXECUTE Statement http://help.sap.com/saphelp_nwpi711/helpdata/en/44/7b72b2fde93673e10000000a114a6b/frameset.htm
The following SQL data types are supported:
INTEGER, BIT, TINYINT, SMALLINT, BIGINT, FLOAT, REAL, DOUBLE, NUMERIC, DECIMAL, CHAR, VARCHAR, STRING, LONGVARCHAR, DATE, TIME, TIMESTAMP, BINARY, VARBINARY, LONGVARBINARY, BLOB (input and output), CLOB (input and output), CURSOR (output; only in connection with the Oracle JDBC driver)
I think you can execute your StoreProcedure many times depends of array occurs.
Regards.
Bruno. -
HOW TO CREATE SEVERAL folder for the generation and READING FILE
HOW TO CREATE SEVERAL folder for the generation and READING FILE WITH THE COMMAND utl_File.
please give an example to create 3 folders or directories ...
I appreciate your attention ...
Reynel Martinez SalazarI hope this link help you.
[http://www.adp-gmbh.ch/ora/sql/create_directory.html]
create or replace directory exp_dir as '/tmp';
grant read, write on directory exp_dir to eygle;
SQL> create or replace directory UTL_FILE_DIR as '/opt/oracle/utl_file';
Directory created.
SQL> declare
2 fhandle utl_file.file_type;
3 begin
4 fhandle := utl_file.fopen('UTL_FILE_DIR', 'example.txt', 'w');
5 utl_file.put_line(fhandle , 'eygle test write one');
6 utl_file.put_line(fhandle , 'eygle test write two');
7 utl_file.fclose(fhandle);
8 end;
9 /
PL/SQL procedure successfully completed.
SQL> !
[oracle@jumper 9.2.0]$ more /opt/oracle/utl_file/example.txt
eygle test write one
eygle test write two
[oracle@jumper 9.2.0]$
SQL> declare
2 fhandle utl_file.file_type;
3 fp_buffer varchar2(4000);
4 begin
5 fhandle := utl_file.fopen ('UTL_FILE_DIR','example.txt', 'R');
6
7 utl_file.get_line (fhandle , fp_buffer );
8 dbms_output.put_line(fp_buffer );
9 utl_file.get_line (fhandle , fp_buffer );
10 dbms_output.put_line(fp_buffer );
11 utl_file.fclose(fhandle);
12 end;
13 /
eygle test write one
eygle test write two
PL/SQL procedure successfully completed.
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdump
SYS EXP_DIR /opt/oracle/utl_file
SQL> drop directory exp_dir;
Directory dropped
SQL> select * from dba_directories;
OWNER DIRECTORY_NAME DIRECTORY_PATH
SYS UTL_FILE_DIR /opt/oracle/utl_file
SYS BDUMP_DIR /opt/oracle/admin/conner/bdumpRegards salim.
Edited by: Salim Chelabi on Apr 4, 2009 4:33 PM -
How to create fxplug transition for xcode and quatrz composer
how to create fxplug transition for xcode and quatrz composer?
Hi Mohan,
You have to create and configure your system in the system administration tab in the portal.
Usually, it looks like the following:
System from template: JDBC System
Connector properties
Connection URL: jdbc:sap:sqlserver://<serverlocation>;DatabaseName=<database name>
Driver class name: com.sap.portals.jdbc.sqlserver.SQLServerDriver
User management properties
User mapping type: admin, user
Set the system with an alias.
Go to user administration tab and map the user with VCRole to the configured system
(the default for MSSQL is usauly user: sa and pw: admin)
Save your changes and logon to VC with this user.
The alias name should appear in your list of systems.
Hope I helped,
Shay -
How to run Excel Macros using JDBC-ODBC
Hi,
I want to run the excel macros in the excel file, after I connected to excel file, using JDBC-ODBC bridge.
How macros treated here?
Help needed please..........
- RameshHow to run Excel Macros using JDBC-ODBCYou don't.
As my fuzzy understanding goes.....
Macros (excel, word, etc) run via a "OLE" extension of the script host system.
So the only way to run them is via the OLE interface. That has nothing to do with ODBC. You can write your own JNI to do that, or you might get lucky and find that someone else has written a java library to do it for you. -
Urgent help: how to create data source for Weblogic RMI driver
Hi,
Please let me how to create data source for Weblogic RMI driver using Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhatDataSource will internally do that for you (It will use RMI internaly) . You
dont have to worry about the details of using RMI driver. Thats what is a
DataSource is for.
sree
"pradeep bhat" <[email protected]> wrote in message
news:[email protected]...
Hi Sree,
What u have written is abt configuting Datasource for type 2 and
4 drivers.
But I want to know how to create data source for RMI driver. If
I map this datasource to connection pool that is created for
type 2 or 4 drivers, i don't understand why RMI drivers are
required in first place. If i do map the data source to connection pool
created
for type 2 or 4 drivers then where i
would not have used the URL as jdbc:weblogic:rmi and Driver as
weblogic.jdbc.rmi.Driver.
Hope u will help me.
pradeep bhat
"Sree Bodapati" <[email protected]> wrote:
Hi Pradeep
To create a connection pool you have to use a database driver not RMI
driver. So use a thin driver or the WebLogic jDriver for Oracle to setup
your connection pool. Once the connection pool is created you can create
a
DataSource and use this datasource to connect to the database.
The RMI driver can be used to get connections from the database via the
connection pool and in that case you dont need a datasource. Recommended
approach is to use a DataSource.
hth
sree
"PRADEEP BHAT" <[email protected]> wrote in message
news:[email protected]...
Hi,
Please let me how to create data source for Weblogic RMI driver using
Administrator
console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL as
jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver. Now
comes the problem.. what do put in properties text area? I am
talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a new
DataSource
mapping to the connection pool created from step 1.
How to accomplish step 1 ? I want to finally connect to Oracle
database. Please help me.
pradeep bhat -
Urgent help: how to create data source for Weblogic T3 driver
Hi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhatHi,
Please let me how to create data source for Weblogic T3 driver
using Administrator console.
I understand that the following steps are required:
1.Create connection pool for the RMI driver by specfiying URL
as jdbc:weblogic:rmi and Driver as weblogic.jdbc.rmi.Driver.
Now comes the problem.. what do put in properties text area?
I am talking about key/value pairs required?
2. Having done step 1 ( which I was not able to do) , create a
new DataSource mapping to the connection pool created from
step 1.
How to accomplish step 1 ? I want to finally connect to Oracle database. Please
help me.
pradeep bhat -
How to create a macro for a planning type in MC8b transaction
Hi,
I am presently working for a product allocation demand, which have a information structiure with characteristic and key field.
the characteristic are production allocation quantity, incoming order quantity, and open order quantity.
i have created a planning type in which the data updation takes from the excel file to the planning type in mc95.
but i need to create a macro for this planning type .
can any body give the details information how to create a Macro for a planning type.
Thanks and regards
GopalKrishnaDear Gopal
May be the link would be helpful to you.
[Planning Types and Macros|http://help.sap.com/saphelp_46c/helpdata/en/a5/631cc443a211d189410000e829fbbd/frameset.htm]
Drill down the left tab once you opened the link, for more information.
Thanks
G. Lakshmipathi -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
How to create one TO for multiple TRs
Dear All,
how to create one TO for multiple TRs, kindly suggest me
Regards,
baluAs for your question: it is discussed in sAP online help:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
Sorry I misunderstood your question.
The above mentioned solution won't create one single TO from multiple TR.
Edited by: Csaba Szommer on Aug 11, 2010 9:46 AM -
How to create one checksum for 264 vis
Hi,
How to create "one Checksum" for 264 Vis.These 264 Vis are Interlinked if i change code for any .vi the checksum Should be update.This checksum is shown on the main window.
Regards
Ravindranath
Solved!
Go to Solution.Here's a slightly simplified version (saved in 8.6). There's no need for the Get/Set File Position. The file position is already being incremented with the read.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Multiple File MD5 Checksum (Version 8.6).vi 23 KB
Maybe you are looking for
-
Hyperlink problem when converting Word to PDF
Hi everyone. I am using Adobe Acrobat 7.0 Standard version 7.1.4 on a Windows 2000 environment. I am using Word XP/2002 SP3. I have a couple of problems when converting Word to PDF. When converting a long link which is in 2 lines, PDF just takes one
-
Book no longer visible in Projects tab of Inspector - How do I get it back?
Something happened in a Time Machine backup and although the project I was working on is still visible in the "project tab" of Inspector, the book I designed and printed two days ago is no longer visible. I also had a folder with the photos I was usi
-
How to merge 2 part of two different Domdocument
Hi, I try to copy on subtree from a first DOMdocument to a second DOMDocument and I receive a java null pointer exception. How can I copy one part of a DOM to another ? CREATE OR REPLACE PROCEDURE testDom IS BufferString VARCHAR2(32767) := '<TEST>tes
-
Hi friends Regarding third party sales order as per my knowledge Me21n is for creating purchase order Migo is for goods receipt from vendor Miro is for incoming invoice from vendor My question is wht r for these t-codes Me57 me51n Plz reply me thanks
-
Export with Metadata does not write EXIF Lens & GPS info
I use the Olympus E-3. I've worked an entire project with Aperture 2 (now at 2.1.2), only to find out eventually that when exporting, aperture does not write the Lens info, and GPS section of the EXIF. This is bread and butter for me. Did a search in