How to create full editable JComboBox  ?

I need to create full editable comboBox -- i want to do it by extends the class JComboBox - but i dont realy know how to collect the chars that the user will be insert and show then on the control.
Does someone know where can i find some example of editable JComboBox ?
Thanks.

JComboBox can already be made editable, so you need to clarify what exactly you mean by "full editable"
Recommended reading: The Java™ Tutorials: How to use Combo Boxes: [Using an Editable Combo Box|http://java.sun.com/docs/books/tutorial/uiswing/components/combobox.html#editable]
db

Similar Messages

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • How to create full new user with all privileges

    how to create full new user with all privileges?
    and how to delete existing users?
    Thanks in advance..

    Common solution is probably to use sudo for privilege elevation, wiki should help

  • How to create and edit anomalous tables in DIAdem? Such as the example list.

    How to create and edit anomalous tables in DIAdem?
    Can the tables  be edited as in MS Word?
    帖子被yangafreet在08-21-2007 10:28 PM时编辑过了
    Attachments:
    table example.doc ‏26 KB

    Hi yangafreet,
    There is no way I know of to create a DIAdem table that looks like the table in your Word document.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • How to create an editable ALV?

    How to create an editable ALV?

    The follow program demonstrates how to make individual fields of an ALV grid editable (NetPR greater than 10).
    Changes required from a basic ALV grid include adding a new field to ALV grid data table(it_ekko), Populating this
    field with style attribute and adding an entry to layout control table. Also from the previous examples used on
    this website you will also need to change the data type of the fieldcatalog, the layout and use a different function
    module for displaying the report.
    *& Report  ZDEMO_ALVGRID_EDIT                                          *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic ALV grid, Enhanced to display specific fields as          *
    *& editable depending on field value                                   *
    REPORT  ZDEMO_ALVGRID_EDIT                 .
    TABLES:     ekko.
    TYPE-POOLS: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
      field_style  TYPE lvc_t_styl, "FOR DISABLE
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER LINE,
          wa_fieldcat TYPE lvc_s_fcat,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
          gd_repid     LIKE sy-repid.
    *Start-of-selection.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM set_specific_field_attributes.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      wa_fieldcat-fieldname   = 'EBELN'.
      wa_fieldcat-scrtext_m   = 'Purchase Order'.
      wa_fieldcat-col_pos     = 0.
      wa_fieldcat-outputlen   = 10.
      wa_fieldcat-emphasize   = 'X'.
      wa_fieldcat-key         = 'X'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'EBELP'.
      wa_fieldcat-scrtext_m   = 'PO Item'.
      wa_fieldcat-col_pos     = 1.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'STATU'.
      wa_fieldcat-scrtext_m   = 'Status'.
      wa_fieldcat-col_pos     = 2.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'AEDAT'.
      wa_fieldcat-scrtext_m   = 'Item change date'.
      wa_fieldcat-col_pos     = 3.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MATNR'.
      wa_fieldcat-scrtext_m   = 'Material Number'.
      wa_fieldcat-col_pos     = 4.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MENGE'.
      wa_fieldcat-scrtext_m   = 'PO quantity'.
      wa_fieldcat-col_pos     = 5.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'MEINS'.
      wa_fieldcat-scrtext_m   = 'Order Unit'.
      wa_fieldcat-col_pos     = 6.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'NETPR'.
      wa_fieldcat-scrtext_m   = 'Net Price'.
      wa_fieldcat-edit        = 'X'. "sets whole column to be editable
      wa_fieldcat-col_pos     = 7.
      wa_fieldcat-outputlen   = 15.
      wa_fieldcat-datatype     = 'CURR'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'PEINH'.
      wa_fieldcat-scrtext_m   = 'Price Unit'.
      wa_fieldcat-col_pos     = 8.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    FORM build_layout.
    Set layout field for field attributes(i.e. input/output)
      gd_layout-stylefname = 'FIELD_STYLE'.
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
    call function 'REUSE_ALV_GRID_DISPLAY'
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
           EXPORTING
                i_callback_program      = gd_repid
               i_callback_user_command = 'USER_COMMAND'
                is_layout_lvc               = gd_layout
                it_fieldcat_lvc             = it_fieldcat
                i_save                  = 'X'
           TABLES
                t_outtab                = it_ekko
           EXCEPTIONS
                program_error           = 1
                OTHERS                  = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    FORM data_retrieval.
      SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
       UP TO 10 ROWS
        FROM ekpo
        INTO  CORRESPONDING FIELDS OF TABLE it_ekko.
    ENDFORM.                    " DATA_RETRIEVAL
    *&      Form  set_specific_field_attributes
          populate FIELD_STYLE table with specific field attributes
    form set_specific_field_attributes .
      DATA ls_stylerow TYPE lvc_s_styl .
      DATA lt_styletab TYPE lvc_t_styl .
    Populate style variable (FIELD_STYLE) with style properties
    The NETPR field/column has been set to editable in the fieldcatalog...
    The following code sets it to be disabled(display only) if 'NETPR'
    is gt than 10.
      LOOP AT it_ekko INTO wa_ekko.
        IF wa_ekko-netpr GT 10.
          ls_stylerow-fieldname = 'NETPR' .
          ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                                 "set field to disabled
          APPEND ls_stylerow  TO wa_ekko-field_style.
          MODIFY it_ekko FROM wa_ekko.
        ENDIF.
      ENDLOOP.
    endform.                    " set_specific_field_attributes

  • ADF Faces - How to create an editable rich table at runtime

    Hi,
    JDeveloper version - 11.1.1.4.0
    I have been trying to create an editable table (wherein the user can enter text into the input text boxes contained in the columns added at runtime). The values thus entered are to be captured in the backing bean for further processing.
    Below are my attempts to achieve this in various ways but without success.
    Attempt 1 : Created a Read-Only Dynamic table by dropping the view object instance from the Data Control. Here, the default being output text components, I used input text components and programatically make it updatable in the backing bean, which however, shows as an output text component.
    1) UI - .jspx file
    <af:table rows="#{bindings.TestViewObject1.rangeSize}"
                        fetchSize="#{bindings.TestViewObject1.rangeSize}"
                        emptyText="#{bindings.TestViewObject1.viewable ? 'No data to display.' : 'Access Denied.'}"
                        var="row" rowBandingInterval="0"
                        value="#{bindings.TestViewObject1.collectionModel}"
                        selectedRowKeys="#{bindings.TestViewObject1.collectionModel.selectedRow}"
                        selectionListener="#{bindings.TestViewObject1.collectionModel.makeCurrent}"
                        rowSelection="single"
                        id="t1"
                        partialTriggers="::cb1 ::cb2"
                        binding="#{TestDynamicTable.t1}">
                <af:forEach items="#{TestDynamicTable.attributeDefns}"
                            var="def">
                  <af:column headerText="#{def.name}"
                             sortable="true" sortProperty="#{def.name}" id="c1">
                    <af:inputText value="#{row[def.name]}" id="it1"
                                  label="Label 1"
                                  autoSubmit="true" />               
                  </af:column>
                </af:forEach>
              </af:table>2) Backing bean -
        public void listenMeForAction(ActionEvent ae) {
           //adding attribute dynamically
          ViewAttributeDefImpl def = (ViewAttributeDefImpl)vo.addDynamicAttribute("testDynamicAttr"+columnCount);
          def.setUpdateableFlag(def.UPDATEABLE);
         byte b = def.UPDATEABLE;
         def.setEditable(true);
         //def.setProperty(def.ATTRIBUTE_CTL_TYPE,);
         //def.getUIHelper().HINT_NAME_UPDATEABLE
         def.setProperty(def.ATTRIBUTE_DISPLAY_HINT_DISPLAY, def.HINT_NAME_UPDATEABLE);
         columnCount ++ ;
         AdfFacesContext.getCurrentInstance().addPartialTarget(this.t1);
    Attempt 2 : Created a ADF table by dropping the view object instance from the Data Control. Here, the columns and its cells are added programatically in the backing bean. However
    1) UI - .jspx file
    <af:table value="#{bindings.Test5ViewObj1.collectionModel}" var="row"
                        rows="#{bindings.Test5ViewObj1.rangeSize}"
                        emptyText="#{bindings.Test5ViewObj1.viewable ? 'No data to display.' : 'Access Denied.'}"
                        fetchSize="#{bindings.Test5ViewObj1.rangeSize}"
                        rowBandingInterval="0"
                        id="richDynamicTable"
                        binding="#{TestDynamicTable.richDynamicTable}">
    </af:table>2) Backing bean - When the buildRichTable method is invoked from the constructor, the table shows the input text boxes as required, but the entered values is not getting retrieved (). Tried adding a valuchangelistener to the added cell, but this does not fire as well.
    Below code however, creates a new instance of RichTable. Also, if an overloaded method is invoked on an ActionEvent, the columns added are not displayed.
      //called from costructor 
      public void buildRichTable() {
        dynamicVO.clearCache();
        //create this table
        richDynamicTable = new RichTable();
        int noOfCols = 2;
        for(int i=0; i<noOfCols; i++) {
          //create new column for the table
          richDynamicCol = new RichColumn();
          richDynamicCol.setHeaderText("ColTest"+i);
           // richDynamicCol.isVisible()
           // richDynamicCol.setVisible(arg0);
          richDynamicCol.setParent(richDynamicTable);
          richDynamicTable.getChildren().add(richDynamicCol);
          richDynamicTable.getChildCount();
          richDynamicTable.getRowCount();
          richDynamicCell = new RichInputText();
          richDynamicCell.setLabel("aCell"+i);
         // richDynamicCell.isVisible()
            MethodExpression methodExpression = FacesContext.getCurrentInstance().getApplication().
                                                                      getExpressionFactory().createMethodExpression(
                                                                        FacesContext.getCurrentInstance().getELContext(),
                                                                        "#{TestDynamicTable.inputBoxValueChangeListener}",
                                                                        null,
                                                                        new Class[] {ValueChangeEvent.class});
          //this does not work too - on adding some text and tabbing out
          richDynamicCell.addValueChangeListener(new MethodExpressionValueChangeListener(methodExpression));
          richDynamicCell.setParent(richDynamicCol);
          richDynamicCell.setValue("#{row.ColTest"+i+"}");
          richDynamicCol.getChildCount();
          richDynamicCol.getChildren().add(richDynamicCell);
         dynamicVO.addDynamicAttribute("ColTest"+i);
        //dynamicVO.insertRow(dynamicVO.createRow());
        dynamicVO.getRowCount();
       AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicTable());
       AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicCol());
       AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicCell());
       buildTable = false;
       this.setDynamicVO(dynamicVO);
    //captures the input data
      public void captureRichTableData(ActionEvent ae) {
    //gives null below
        this.getDynamicVO().getCurrentRow().getAttribute("ColTest0");
        this.getDynamicVO().getCurrentRow().getAttribute("ColTest1");
    //again null   
        List<UIComponent> listCols = richDynamicTable.getChildren();
        for(UIComponent aColComp : listCols) {
            RichColumn aCol = (RichColumn)aColComp;
            List<UIComponent> listCells = aCol.getChildren();
            for(UIComponent aCellComp : listCells) {
              RichInputText anInputText = (RichInputText)aCellComp;
                anInputText.getValue();
      }Not sure what I must be missing. May be I need to add bindings to the text boxes added but cant figure how to go about it. I found some posts on dynamically adding columns pointing to displaying contained data. Any help would be highly appreciated.
    Thanks for your time.
    Dinu

    Hi,
    Not too sure if I am heading the right way, but tried adding the bindings and value expression at runtime for the added columns. The values added at the screen is again found null at the VO and RichInputText child / cell. The updated method is as below -
          buildRichTable() {
          //adding binding for the added cell
          DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          if(bc.findCtrlBinding("ColTest"+i) == null) {
              bc.addControlBinding("ColTest"+i, new JUCtrlAttrsBinding(null,
                                                     bc.findIteratorBinding("Test5ViewObj1Iterator"),
                                                         new String[]{"ColTest"+i}));
          //the expression to be set in value attribute for richInputText component 
          String theExpression = "#{row.bindings."+"ColTest"+i+".inputValue}";
          //setting the expression
          richDynamicCell.setValueExpression("ColTest"+i, getValueExpression(theExpression)); 
          richDynamicCell.setAutoSubmit(true);
          richDynamicCol.getChildCount();
          richDynamicCol.getChildren().add(richDynamicCell);
        dynamicVO.addDynamicAttribute("ColTest"+i);
        dynamicVO.insertRow(dynamicVO.createRow());
        dynamicVO.getRowCount();
        AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicTable());
        AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicCol());
        AdfFacesContext.getCurrentInstance().addPartialTarget(this.getRichDynamicCell());
       buildTable = false;
       this.setDynamicVO(dynamicVO);
      private ValueExpression getValueExpression(String theExpression) {
       FacesContext fc = FacesContext.getCurrentInstance();
       Application app = fc.getApplication();
       ExpressionFactory elFactory = app.getExpressionFactory();
       ELContext elContext = fc.getELContext();
       return elFactory.createValueExpression(elContext, theExpression, Object.class);
      }It would be great help to have any leads.
    Thanks,
    Dinu

  • How to create an editable table in ADF 10g??

    Hi,
    I want to create a editable table using the Jdev 10g.. so that i can do read and write on the table. Can anyone tell me how i can create it...
    thanks in advance

    Hi,
    using ADF BC and ADF, one of the options when dragging a ViewObject from the data control palette is ADF Table. This creates an updateable table
    Frank

  • How to create and edit a .ini file using java

    Hi All...
    Pls help me in creating and editing an .ini file using java...
    thanks in advance
    Regards,
    sathya

    Let's assume the ini file is a mapping type storage (key=value) so lets use Properties object. (works with java 1.4 & up)
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileOutputStream;
    import java.io.IOException;
    import java.util.Properties;
    public class Test {
         private static Properties props;
         public static void main(String[] args) throws IOException {
              File file = new File("test.ini");//This is out ini file
              props = new Properties();//Create the properties object
              read(file);//Read the ini file
              //Once we've populated the Properties object. set/add a property using the setProperty() method.
              props.setProperty("testing", "value");
              write(file);//Write to ini file
         public static void read(File file) throws IOException {
              FileInputStream fis = new FileInputStream(file);//Create a FileInputStream
              props.load(fis);//load the ini to the Properties file
              fis.close();//close
         public static void write(File file) throws IOException {
              FileOutputStream fos = new FileOutputStream(file);//Create a FileOutputStream
              props.store(fos, "");//write the Properties object values to our ini file
              fos.close();//close
    }

  • How to create an editable List box

    Hi,
    Can any body help me out in creating an editable list box, I mean the options should be editable in the listbox. Thanks in advance.

    I mean, you have dropdown list box with some options.
    They will not be editable in the normal scenario. I want one of the options to be editable, similar to a textbox , when selected.
    Is that possible in JSF? If any one could help with Javascript also, its fine for me.

  • How to create an editable table in webdynpro for ABAP? Help!

    Hi Experts,
            I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
    how can I achieve this? Is there any such feature in ALV component?
    Any code sample will be really helpfull.
    Please help!
    Thanks
    Gopal

    Hi,
    yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
    Regards, Heidi
    PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
    Message was edited by: Heidi von Geisau

  • How to create an editable previewable report?

    The Situation (the report is  CrystalReports.Engine.ReportDocument):
    I load the report (.Load(Template)) and  set data (.SetDataSource(DataTable)). I save the report (.SaveAs or .Export). The Template does not necessary contains fields in DataTable used as datasource.
    When I open the created report in "Crystal Reports 2011" the report preview is shown.  When I switch to the design tab I can drag fields to the report, but when I switch to the preview again a dialog asking for ado.net xml datafile is shown and when canceled (I have no datafile) empty preview is shown. In Visual Studio 2010 (CRVS 2010?) I see the preview when I cancel the dialog and click the design and  the preview again.
    The Question:
    Is it possible to create a report containing data with the preview working after report is edited?
    Note:
    I can achieve the desired behavior with external data file, but this soulution is not very convenient.

    Ah... that helps a lot...
    A couple of ways to go about this. From your template report compare the fields that exist in the report with those your Query has and add them into the Report. You can use the Command Object to append the fields and then the report will need to be refreshed against the XML file. In this case though the report will need to be ran again.
    Another option is to export your data from your Query into a DataSet and simply .setlocation to the DS, great for small amounts of data, less than 2K rows or so but you'll have to test for the limits.
    Another option is to to use RAS to completely create the report from nothing. See these samples on how to:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
    Bottom line is if you change the fields in a report it is going to have to be refreshed so the report can add/update the field reference list saved in the RPT file. If they don't match CR will simply delete all fields it can't match up.
    If using RAS to Create the report and set it to the new field list then you can build your own "Report Designer"
    As for running the Query again, that depends on how and where the data exists. If you save your date results into an XML file then it won't hit the DB again.
    This will generate the XML file:
                ds.WriteXml(@"D:\Atest\list_of_workflows.xml");
                ds.WriteXmlSchema(@"D:\Atest\list_of_workflows.xsd");
    Then load the XML file into a Dataset and then simply use:
    rpt.SetDataSource(ds);
    To set the Report to the XML file.
    XML is the preferred way and it doesn't have any memory limitations as Active DataSets do. ( MS limitation due to security, CR can't access the original so we have to make a copy which effectively doubles the amount of memory required )
    Don

  • How to create an Editable report?

    I want to generate one report using BEx Analyser as my client’s requirement. What the client’s requirement is, when he refreshes the query, he wants the query to be get refreshed and another user-editable sheet need to be get created. And the calculation doing on the query should be reflected in the additional sheet also. So what he really wants is that, he wants to get a BW report. In addition to that he wants one modifiable worksheet, so that he can compare the results with the query output.
    For Example: My client is a manufacturing company. So it uses different materials in different compositions to manufacture the products to get the maximum profit. When he refreshed the query all the details of each material that used and the final product details also will get. That details will include cost of raw materials, man power he used, machines details and time taken for the manufacturing, power used etc. From these all fields the <b>total cost of the product is getting calculated</b>. As the market prices of various raw materials are changing he wants to reduce the variation in the total expense he has to spend on the product. So he wants to try with different values for the variable fields like cost of raw materials with the variation in market price, by varying the manpower etc. etc. So when he changes each fields the corresponding change <b>should be reflected in the final cost as well as different calculation results</b>.
    How can I give a solution for this? Is this possible with BEx Macros? As I am new to the macros can someone send me the details of Macro and the step by step procedure to create a macro and to use it properly for the requirements in below mail ID..
    [email protected]
    Answers will be rewarded with points..
    Thanks in advance,
    Mathew.

    I would suggest, building additional columns in your query for the what if analysis. These columns would use formula variables for the user to input for the changeable fields. These will give hima side by side comparison of actual and what-if values.
    Thanks
    Vineet

  • How to create a editable Report in Apex

    Hello,
    I have to create a screen, "User Maintenance". Where User can be update and updated.
    I was going through the reports queries. How ever how can I create a SQL Editable Report?
    Awaiting for a quick reply.
    Thanks,
    Girish

    Hello,
    Thanks, it worked.
    However there few fields allowed to modify, rest all should not be allowed to change.
    However Insertion is allowed on all fields.How to achieve this? How to achieve this?
    Thanks,
    Girish
    Edited by: Girish on Jun 18, 2010 7:34 AM

  • How to create non editable fields in OIM?

    Hi ,
    I would like to know about the creation of non-editable fields in OIM.
    Thanks in Advance.

    Hi,
    Where do you want to create this field? (Create User Form, Process Form....).
    If your requirement is to do it in the Create User Form, or Self Register or Edit Profile... You have to edit the FormMetadata.xml file. There are many posts in the forum of how to edit this file but ask if you need any help.

  • How to create and edit time curves for parameteric EQ

    Hi all, I'd like to do something very basic, but I can't figure out how to do it.
    I've got a video, and I'd like to apply some filters to an audio track, and sync it with the video. I've managed to load in the video, put my audio files on the multisession, and place the effects I want in place. I can't figure out the rest - i.e. animating the parameters. I'm used to animation software (such as aftereffects), where I can enable keyframing for a channel, goto a time on the timeline, change the value for a parameter and it's saved as a keyframe at that time.
    I do have a bunch of midi controllers, but I'd rather hand edit these keyframes for accuracy as opposed to trying to record, there's only a few moments so should take me just a few seconds if I knew how to do it!
    Cheers,

    Ah indeed, there is the familiar keyframe interface. That's great thanks, however I still couldn't find how to control these from the effect interface! I.e. I can edit the curves from there, but there's about 20+ parameters on the parameteric EQ, to have to go through keyframing it through the curves and not the interface would be nuts. I'd like to set all of the parametric EQ parameters (freq, Q, gain for each band) to be keyframable (which I can go through and do once if need be by manually setting a keyframe at time==0), but then I'd like to just use the parametric EQ interface, move the points around, and have the keyframes created. Currently what it seems what I have to do is:
    - go through all 20 parameters and manually place a keyframe at time==0
    - go to a new time on the timeline, and move all my points around in the parametric EQ interface
    - go back to automation curves and go through all 20 parameters one by one clicking on the 'add keyframe' button for each parameter individually.
    - go to the next time on the timeline, and repeat
    Suffice to say this is tedious enough, but it gets even more interesting when:
    The parametric eq interface does not update to show what the actual current value (From the automation) graph is. So if I want to slightly tweak a value (e.g. lift or drop a tiny bit), I can't do it, I can't see in the parametric eq window what the current value is. So I need to:
    - goto the automation curve and find the parameter in question
    - read out the value
    - go back to the parametric window, and set that number in first
    - and then edit it.
    And then it gets even more interesting (this is probably a bug), because I'm having trouble editing current keyframes. I've found if I move a value on the parametric EQ window if there already is a keyframe in place I'd hoped it would just update the keyframe, but instead it does nothing. What I need to do is:
    - first remove the keyframe
    - then move the parameter in the parameq window
    - then set the keyframe again.
    If I move the parameter first, then remove the keyframe, then set the keyframe again, it won't get the new value. The parameter must be moved after the keyframe is removed. nuts.
    I hope I'm just doing it wrong and there is an easy 'auto-set keyframes' option somewhere!
    I'm running audition CC v6.0 build 732 64bit on windows 8.1 pro.

Maybe you are looking for