How to create internal table storing instances of ABAP class
Hi experts, any one knows how to create internal table storing instances of ABAP class or alternative to implement such function?
Hi
Please see below example from ABAPDOCU, this might help you.
Internal Table cnt_tab is used to store class objects.
Regards,
Vishal
REPORT demo_objects_references.
CLASS counter DEFINITION.
PUBLIC SECTION.
METHODS: set IMPORTING value(set_value) TYPE i,
increment,
get EXPORTING value(get_value) TYPE i.
PRIVATE SECTION.
DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
count = set_value.
ENDMETHOD.
METHOD increment.
ADD 1 TO count.
ENDMETHOD.
METHOD get.
get_value = count.
ENDMETHOD.
ENDCLASS.
DATA: cnt_1 TYPE REF TO counter,
cnt_2 TYPE REF TO counter,
cnt_3 TYPE REF TO counter,
cnt_tab TYPE TABLE OF REF TO counter.
DATA number TYPE i.
START-OF-SELECTION.
CREATE OBJECT: cnt_1,
cnt_2.
MOVE cnt_2 TO cnt_3.
CLEAR cnt_2.
cnt_3 = cnt_1.
CLEAR cnt_3.
APPEND cnt_1 TO cnt_tab.
CREATE OBJECT: cnt_2,
cnt_3.
APPEND: cnt_2 TO cnt_tab,
cnt_3 TO cnt_tab.
CALL METHOD cnt_1->set EXPORTING set_value = 1.
CALL METHOD cnt_2->set EXPORTING set_value = 10.
CALL METHOD cnt_3->set EXPORTING set_value = 100.
DO 3 TIMES.
CALL METHOD: cnt_1->increment,
cnt_2->increment,
cnt_3->increment.
ENDDO.
LOOP AT cnt_tab INTO cnt_1.
CALL METHOD cnt_1->get IMPORTING get_value = number.
WRITE / number.
ENDLOOP.
Similar Messages
-
How to create internal table for a structure in BSP
hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
include type zuvendstr.
data:end of itab_1.
data wa_str like line of itab_1.
loop at itab_1 into wa_str. %>
<tr>
<td><%=wa_str-name%> </td>
<%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPSHi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy -
How to create internal table dynamically based on a table entry
hi Experts,
I have table yprod_cat. It has product categories.
In my ABAP program I need to create internal table dynamically based on the number of entries in the table.
For example:
If the table has 3 entries for product category
1. Board
2. Micro
3. Syst
Then create three (3) internal tables.
i_board
i_micro
i_syst
How can we do this? Any sample code will be very usefull
Thanks & Regards
Gopal
Moderator Message: No sample codes can be given. Please search for them or work it!
Edited by: kishan P on Jan 19, 2011 4:22 PMOur APEX version is 4.2We are using below SQL query to display radio groups dynamically..
SELECT APEX_ITEM.RADIOGROUP (1,deptno,'20',dname) dt
FROM dept
ORDER BY 1;
Created a form using SQL type and given abouve SQL query as source.. But when we run the page, there were no radio groups displayed in the page..
Below is the output of the query..
<input type="radio" name="f01" value="10" />ACCOUNTING
<input type="radio" name="f01" value="20" checked="checked" />RESEARCH
<input type="radio" name="f01" value="30" />SALES
<input type="radio" name="f01" value="40" />OPERATIONS
>
If Tabular Form:
Edit Region > Report Attributes > Edit Column > Change the Column type to "Standard Report Column"
If normal Page Item:
Edit Page Item > Security > Escape special characters=No.
Pl read the help on that page item to understand the security risk associated with =NO.
Cheers,
Edited by: Prabodh on Dec 3, 2012 5:59 PM -
How to create internal table dynamically?
hi all
I have a particular internal table in memory area( thru EXPORT TO MEMORY ID ....)
how can i create an internal table of this type in another program at runtime ?
this internal table need not be a data dictionary type.
i.e., i need to create an internal table of type which
is stored in a particular memory-id.
Regards,
Naveen........
nullHi,
Check this code :
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE,
<fs_dyntable>,
<fs_fldval> type any.
PARAMETERS: p_cols(5) TYPE c.
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
* Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
* Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
DATA it_fieldcatalog TYPE lvc_t_fcat.
DATA lr_table TYPE REF TO data.
FIELD-SYMBOLS <lt_table> TYPE table.
*-- Import the fieldcatalog
IMPORT it_fieldcatalog TO it_fieldcatalog
FROM MEMORY ID 'CREATE_DYNAMIC_TABLE'.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Create the dynamic table with the field catalog as structure
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcatalog
IMPORTING
ep_table = lr_table
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Convert the reference into a table
ASSIGN lr_table->* TO <lt_table>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
*-- Export the created table so that the function module can import it
EXPORT lt_table FROM <lt_table>
TO MEMORY ID 'CREATE_DYNAMIC_TABLE'.
Regards
L Appana -
How to create internal table in Adobe form - SFP transaction?
How shd i create an internal table under Global data ???
Regards,
Gurmukh singhyou can create the inernal table using the table types.
assume you want to create the Inernal table of type SFLIGHT, then you can create in this way...under the global Defintions.
VARiABLE NAME Type Assignment Type name
IT_SFLIGHT TYPE SFLIGHT_TAB1
IT_VBAP TYPE VBAP_TT
you can populate these tables using the Initialization->Code Initialization.
for more details Check here..
https://www.sdn.sap.com/irj/sdn/adobe -
How to pass internal table with data in ABAP OO
Hi experts ,
Here is the problem...
I create a screen 100 and use the internal table to get data from database, and then press the button on screen 100 , it will call screen 200.
I use ABAP OO code in screen 200, and i want to keep the internal table with data that i get from the sceen 100 parts, but it seems that it just supports to create a new internal table and get data from database in ABAP OO. That means i need to create a new table to save the data in internal table ? Or there is any other solution something like exporting or memory id ...
ps . the internal table in screen 100 is declared in global area, the beginning of the code.
Please give me some advice, thanks a lot!
Regards ,
ClaireI have already know how to do, here is my code:
METHODS fill_tree importing itab2 like itab1.
CALL METHOD: me->fill_tree exporting itab2 = itab1.
In METHOD fill_tree,
declare
data: itab3 TYPE STANDARD TABLE OF itab,
itab3[] = itab1[].
It is useful to me, thanks a lot. -
Can we create internal table dynamically ? how?
hi to all experts,
can we create internal table dynamically ? how?plz explain me with an example.Anybody with good example will be rewarded.it was asked in an interview what the answer for itHI
Yes you can create
see this
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
JUST USE THIS CODE AND DO THE ESSENTIAL CHANGES ACCORDING TO YOU
STEP: 1 - get backend field catalog (currently displayed alv)
CLEAR: tl_fieldcatalog. REFRESH: tl_fieldcatalog.
CALL METHOD w_grid->get_backend_fieldcatalog
IMPORTING
et_fieldcatalog = tl_fieldcatalog.
STEP: 2 - create a new fieldcatalog for dynamic internal table
CLEAR: sl_fieldcatalog.
CLEAR: t_outtab_fieldname. REFRESH: t_outtab_fieldname.
CLEAR: tl_fieldcatalog_new. REFRESH: tl_fieldcatalog_new.
CLEAR: t_download_fieldname. REFRESH: t_download_fieldname.
CLEAR: t_download_fieldheading. REFRESH: t_download_fieldheading.
LOOP AT tl_fieldcatalog INTO sl_fieldcatalog.
STEP: 2.1 - populate data in T_OUTTAB_FIELDNAME
APPEND sl_fieldcatalog-fieldname TO t_outtab_fieldname.
STEP: 2.2 - populate TL_FIELDCATALOG_NEW & T_DOWNLOAD_FIELDNAME
IF sl_fieldcatalog-no_out EQ ''.
IF sl_fieldcatalog-fieldname NE 'STATUS'
OR sl_fieldcatalog-fieldname NE 'MESG_STATUS'
OR sl_fieldcatalog-fieldname NE 'ZLOCK'
OR sl_fieldcatalog-fieldname NE 'T_PLANT'
OR sl_fieldcatalog-fieldname NE 'T_CSR'.
If field is COMM_PLANT, change its length
IF sl_fieldcatalog-fieldname EQ 'COMM_PLANT'.
sl_fieldcatalog-outputlen = 1800.
sl_fieldcatalog-intlen = 1800.
sl_fieldcatalog-dd_outlen = 1800.
ENDIF. "comm_plant
sl_fieldcatalog_new = sl_fieldcatalog.
APPEND sl_fieldcatalog_new TO tl_fieldcatalog_new.
APPEND sl_fieldcatalog-fieldname TO t_download_fieldname.
APPEND sl_fieldcatalog-scrtext_l TO t_download_fieldheading.
CLEAR: sl_fieldcatalog, sl_fieldcatalog_new.
ENDIF.
ENDIF.
ENDLOOP.
STEP: 3 - create dynamic internal table
FREE: ref_download.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
I_STYLE_TABLE =
it_fieldcatalog = tl_fieldcatalog_new
IMPORTING
ep_table = ref_download
E_STYLE_FNAME =
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ASSIGN ref_download->* TO <ft_download>.
CREATE DATA ref_wa LIKE LINE OF <ft_download>.
ASSIGN ref_wa->* TO <fs_download>.
STEP: 4 - populate data in dynamic internal table
LOOP AT t_outtab INTO wa_outtab.
LOOP AT t_download_fieldname.
ASSIGN COMPONENT t_download_fieldname OF STRUCTURE
<fs_download> TO <fs_download_field>.
IF t_download_fieldname-field EQ 'COMM_PLANT'.
STEP: 4.1 - get long text from database table
CLEAR: wal_table.
SELECT SINGLE * FROM zshaven_plnt_txt
INTO wal_table
WHERE vbeln = wa_outtab-vbeln
AND posnr = wa_outtab-posnr
AND del_no = wa_outtab-del_no
AND del_itm = wa_outtab-del_itm.
IF sy-subrc EQ 0.
STEP: 4.2 - break long-text into separate lines
CLEAR: tl_text. REFRESH: tl_text.
SPLIT wal_table-plant_comm
AT '~'
INTO TABLE tl_text.
STEP: 4.3 - Combine these separate lines with space in
between two lines
CLEAR: wal_text, final_text.
LOOP AT tl_text INTO wal_text.
IF final_text IS INITIAL.
final_text = wal_text.
ELSE.
CONCATENATE final_text '-' wal_text
INTO final_text.
REPLACE '-' WITH ' ' INTO final_text.
ENDIF.
ENDLOOP.
STEP: 4.4 - move long text to work-area
<fs_download_field> = final_text.
ENDIF. "subrc
ELSE. "t_download_fieldname
READ TABLE t_outtab_fieldname
WITH KEY field = t_download_fieldname-field.
ASSIGN COMPONENT t_outtab_fieldname-field OF STRUCTURE
wa_outtab TO <fs_outtab_field>.
<fs_download_field> = <fs_outtab_field>.
ENDIF.
ENDLOOP.
STEP: 4.5 - Move data from work-area to dynamic internal table
APPEND <fs_download> TO <ft_download>.
CLEAR: <fs_download>.
ENDLOOP.
STEP: 5 - download
CALL FUNCTION 'DOWNLOAD'
EXPORTING
filename = 'C:\zshaven.xls'
filetype = 'DAT'
filetype_no_show = 'X'
filetype_no_change = 'X'
TABLES
data_tab = <ft_download>
fieldnames = t_download_fieldheading
EXCEPTIONS
invalid_filesize = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
customer_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
How to delete a field from a Dynamically created internal table
Hi friends,
I have got a requirement in which, I will be entering the table name and Excel file from seletion-screen.
based on the Table I have entered in the selection-screen I need to create a dynamic internal table so that I can fill that Execel data into that internal table and later i using BDC i can I can fill the database table using SM30 transaction.
here. my problem is that, When I am creating internal table dynamically, MANDT filed is also getting created in the internal table.
please, help in deleteing the filed MANDT from the internal able.
following is the code which creates the dynamic internal table.
CREATE DATA dy_table TYPE TABLE OF (p_tabname).
assign dy_table->* to <dyn_table>.
please provide, if any sample code is available.
Regards,
Xavier.PHi,
You can use this logic,
While creating the Dynamic filed catalog try to avoid MANDT field.
Ex:
*Dynamic creation of a structure
CREATE DATA LP_STRUCT TYPE (V_TABLE).
ASSIGN LP_STRUCT->* TO <FS>.
*Fields Structure
OF_SDESCR ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <FS> ).
LOOP AT OF_SDESCR->COMPONENTS ASSIGNING <COMPONENTS>.
*Field MANDT not displayed
IF SY-TABIX = 1 AND <COMPONENTS>-NAME = 'MANDT'.
CONTINUE. " Next loop
ENDIF.
*Build Fieldcatalog
LS_LVC_CAT-FIELDNAME = <COMPONENTS>-NAME.
LS_LVC_CAT-REF_TABLE = V_TABLE.
APPEND LS_LVC_CAT TO LT_LVC_CAT.
CLEAR LS_LVC_CAT.
ENDLOOP. -
How to Convert internal table data into text output and send mail in ABAP
Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VThere's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
* -------- create persistent send request ------------------------
gv_send_request = cl_bcs=>create_persistent( ).
* -------- create and set document -------------------------------
* create text to be sent
wa_line = text-001.
APPEND wa_line TO gt_text.
CLEAR wa_line.
APPEND wa_line TO gt_text.
LOOP AT gt_fail ASSIGNING <fs_fail>.
MOVE <fs_fail>-retry_count TO gv_count.
CONCATENATE text-002
<fs_fail>-setting_id
text-003
gv_count
INTO wa_line SEPARATED BY space.
APPEND wa_line TO gt_text.
CLEAR wa_line.
ENDLOOP.
APPEND wa_line TO gt_text.
wa_line = text-007.
APPEND wa_line TO gt_text.
* create actual document
gv_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = gt_text
i_length = '12'
i_subject = 'Failed Precalculation Settings!' ).
* add document to send request
CALL METHOD gv_send_request->set_document( gv_document ).
* --------- set sender -------------------------------------------
gv_sender = cl_sapuser_bcs=>create( sy-uname ).
CALL METHOD gv_send_request->set_sender
EXPORTING
i_sender = gv_sender.
* --------- add recipient (e-mail address) -----------------------
LOOP AT s_email INTO wa_email.
MOVE wa_email-low TO gv_email.
gv_recipient = cl_cam_address_bcs=>create_internet_address(
gv_email ).
CALL METHOD gv_send_request->add_recipient
EXPORTING
i_recipient = gv_recipient
i_express = 'X'.
ENDLOOP.
* ---------- set to send immediately -----------------------------
CALL METHOD gv_send_request->set_send_immediately( 'X' ).
* ---------- send document ---------------------------------------
CALL METHOD gv_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE text-004.
ENDIF.
COMMIT WORK.
* exception handling
CATCH cx_bcs INTO gv_bcs_exception.
WRITE: text-005.
WRITE: text-006, gv_bcs_exception->error_type.
EXIT.
ENDTRY.
with the following declarations
* TABLES *
TABLES:
adr6,
rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS *
DATA:
gt_fail TYPE SORTED TABLE OF rsr_prec_sett
WITH UNIQUE KEY setting_id run_date,
gt_text TYPE bcsy_text,
wa_fail LIKE LINE OF gt_fail,
wa_line(90) TYPE c.
FIELD-SYMBOLS:
<fs_fail> LIKE LINE OF gt_fail.
* VARIABLES *
DATA:
gv_count(4) TYPE n,
gv_send_request TYPE REF TO cl_bcs,
gv_document TYPE REF TO cl_document_bcs,
gv_sender TYPE REF TO cl_sapuser_bcs,
gv_recipient TYPE REF TO if_recipient_bcs,
gv_email TYPE adr6-smtp_addr,
gv_bcs_exception TYPE REF TO cx_bcs,
gv_sent_to_all TYPE os_boolean.
* SELECTION-SCREEN *
SELECT-OPTIONS:
s_email FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
wa_email LIKE LINE OF s_email. -
How to Send Internal table to SAP Spool using Function Modules or Methods?
Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
KiranThis is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
MY_MONTH type T549Q-PABRP,
STR_MY_MONTH(2) type C,
MY_YEAR type T549Q-PABRJ,
STR_MY_YEAR(4) type C,
CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
CMD like PC408-LTYPE value '/:', "command
TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
DOCDATA like SODOCCHGI1,
OBJTXT like SOLISTI1 occurs 10 with header line,
OBJPACK like SOPCKLSTI1 occurs 1 with header line,
RECLIST like SOMLRECI1 occurs 1 with header line,
OBJHEAD like SOLISTI1 occurs 1 with header line,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_buffer type string,
l_no_of_bytes TYPE i,
l_pdf_spoolid LIKE tsp01-rqident,
l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
spool_id type rspoid,
line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
ITAB-PERNR = P0001-PERNR.
ITAB-ABKRS = P0001-ABKRS.
ITAB-ENAME = P0001-ENAME.
ITAB-USRID_LONG = P0105-USRID_LONG.
append itab.
clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
and FPBEG ge W_BEGDA
and FPEND le W_ENDDA
and SRTZA eq 'A'.
* Produce payslip for those payroll results
if SY-SUBRC = 0.
call function 'GET_PAYSLIP'
EXPORTING
EMPLOYEE_NUMBER = ITAB-PERNR
SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
PAYSLIP_VARIANT = PAY_VAR
IMPORTING
RETURN = RETURN
P_INFO = P_INFO
TABLES
P_FORM = P_FORM.
check RETURN is initial.
* remove linetype from generated payslip
loop at p_form.
objbin = p_form-linda.
append objbin.
line_cnt = line_cnt + 1.
endloop.
file_length = line_cnt * 1022.
* create spool file of paylsip
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
i_file_length = file_length
IMPORTING
e_spoolid = spool_id
TABLES
it_textdata = objbin.
IF sy-subrc EQ 0.
WRITE spool_id.
ENDIF.
DESCRIBE table objbin.
DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
SRC_SPOOLID = spool_id
NO_DIALOG = ' '
DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
TABLES
PDF = pdf
EXCEPTIONS
ERR_NO_ABAP_SPOOLJOB = 1
ERR_NO_SPOOLJOB = 2
ERR_NO_PERMISSION = 3
ERR_CONV_NOT_POSSIBLE = 4
ERR_BAD_DESTDEVICE = 5
USER_CANCELLED = 6
ERR_SPOOLERROR = 7
ERR_TEMSEERROR = 8
ERR_BTCJOB_OPEN_FAILED = 9
ERR_BTCJOB_SUBMIT_FAILED = 10
ERR_BTCJOB_CLOSE_FAILED = 11
OTHERS = 12
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'C:\itab_to_pdf.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
OBJHEAD = 'Objhead'.
append OBJHEAD.
* preparing email subject
concatenate W_ENDDA(6)
' Payslip-'
ITAB-ENAME+0(28)
ITAB-PERNR+4(4) ')'
into DOCDATA-OBJ_DESCR.
DOCDATA-OBJ_NAME = 'Pay Slip'.
DOCDATA-OBJ_LANGU = SY-LANGU.
OBJTXT = 'Pay Slip.'.
append OBJTXT.
*prepare email lines
OBJTXT = DOCDATA-OBJ_DESCR.
append OBJTXT.
OBJTXT = 'Please find enclosed your current payslip.'.
append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
clear OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = 3.
OBJPACK-DOC_TYPE = 'RAW'.
append OBJPACK.
* Create Message Attachment
ATT_TYPE = 'PDF'.
describe table OBJBIN lines TAB_LINES.
read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = ATT_TYPE.
OBJPACK-OBJ_NAME = 'ATTACHMENT'.
OBJPACK-OBJ_DESCR = 'Payslip'.
append OBJPACK.
* Create receiver list refresh RECLIST.
clear RECLIST.
RECLIST-RECEIVER = itab-USRID_long.
translate RECLIST-RECEIVER to lower case.
RECLIST-REC_TYPE = 'U'.
append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
call function 'SO_DOCUMENT_SEND_API1'
exporting
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
tables
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = pdf
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
exceptions
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
others = 8.
if SY-SUBRC NE 0.
ITAB-MTEXT = 'Message Not Sent to : '.
else.
ITAB-MTEXT = 'Message Sent to : '.
endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
else.
"SY-SUBRC Not = 0
ITAB-MTEXT = 'Payroll data not found : '.
endif.
"end of SY-SUBRC = 0.
modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
at new MTEXT.
uline.
write : / ITAB-MTEXT color 4 intensified on.
write : / 'Emp. Code' color 2 intensified on,
12 'Emp. Name' color 2 intensified on,
54 'Email ID' color 2 intensified on.
endat.
write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop. -
How to populate internal table field with text data?
Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test, IO Test 1, CHAR, 20
ZEA_IO2, CHA, IO Test, IO Test 2, CHAR, 20
Here is the Code:
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = SPACE
HEADER_LENGTH = 0
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
I appreciate your help.
Regards,
MauI have used tab delimited file.
Here are file contents
io_name io_type io_txsht io_txlng io_datatype io_length
ZEA_IO1 CHA IO Test IO Test 1 CHAR 20
ZEA_IO2 CHA IO Test IO Test 2 CHAR 20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish -
How to create a table control in Business HTML??
Hi All,
I dont have much knowledge about Business HTML. Can anyone tell me how to create a table control. The requirement is to accept two fields from user and then on click of a button get these values populated on a table control. Can u pls help me out on this??
Also to create the table, I tried using SAPTemplateTableBegin()functions, but using these functions gives me an error. Is the because the standard SAP template files does not exist or what??Hi Raja,
My first approach was the same as u said but the issue is when i try to generate a template i.e. (system generated template), the generated template uses standard TemplateLibraryDHTML.html functions like `SAP_TemplateHeader()`
`SAP_BodyContentBegin()`
`SAP_FormBegin()`
The above all is not supported in our client's ITS and so we have to manually create a table control using the step loop functions in DHTML and correspondingly FIELD-SET in ABAP.
We could successfully do this but as i mentioned in my previous message, we still have to make the table entries editable and refresh the internal table when the values in the table are changed.
Pls help!!
Rgds,
Swapna. -
How to convert internal table with dynamic fields to XML
Dear all,
I met a problem like the following:
The aim is to transform the following parameter to XML
IT_FIELD stores the dynamic filed name of the internal table,with these fields, the dynamic internal can be created by cl_abap_tabledescr=>create(it_field)
IT_VALUE stores the value of the internal table dynamically created with dynamic fields.
For example
IT_FIELD =>
line1: FIELD1
line2: FIELD2
line3: FIELD3,
three lines in this internal table.
dynamically created internal table structure FIELD1 FIELD2 FIELD3
And IT_VALUE=>
1 2 3 (First line)
11 22 33
two lines of data.
Do you have any idea about how to transform the IT_VALUE to XML here? And also the transformed XML to the IT_VALUE.( we may need remember IT_FIELD here for later XML to IT_VALUE.)
Hope I describe the problem clearly.
Any inputs will be appreciated.
Edited by: Max Tang on Jan 12, 2009 3:46 PM
Edited by: Max Tang on Jan 12, 2009 4:14 PMHi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that. -
How to pass internal table to method of class
Hi all,
I am new to abap objects, i want to pass one internal table to class.
i am trying in this way.
class c1 definition.
method get_material importing t_stpo type any table
exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
for all entries in t_stpo
where stlnr = t_stpo-stlnr.
endmethod.
endclass.
ERROR:
"stlnr" is not available
if i use this way. its not giing error.
class c1 definition.
method get_material exporting t_mast type any table.
endmethod.
endclass.
class c1 implementation.
method get_material.
select f1 f2 f3 from <tab> into table t_mast
for all entries in it_stpo
where stlnr = it_stpo-stlnr.
endmethod.
endclass.
how to pass internal table with some specific reference may be using like or type <it_xxxx>
thanksTry this.
TYPES : BEGIN OF ty_stpo,
stlnr TYPE stpo-stlnr,
idnrk TYPE stpo-idnrk,
menge TYPE stpo-menge,
END OF ty_stpo,
BEGIN OF ty_mast,
matnr TYPE mast-matnr,
werks TYPE mast-werks,
stlnr TYPE mast-stlnr,
END OF ty_mast,
tt_stpo TYPE TABLE OF ty_stpo,
tt_mast TYPE TABLE OF ty_mast.
DATA : it_stpo TYPE tt_stpo,
it_mast TYPE tt_mast.
* CLASS c1 DEFINITION
CLASS c1 DEFINITION.
PUBLIC SECTION.
METHODS : get_bom_numbers EXPORTING ex_stpo type tt_stpo,
get_parent_material IMPORTING im_stpo TYPE tt_stpo
EXPORTING ex_mast TYPE tt_mast.
endclass.
* CLASS c1 IMPLEMENTATION
CLASS c1 IMPLEMENTATION.
METHOD get_bom_numbers.
ENDMETHOD. "get_bom_numbers
METHOD get_parent_material.
ENDMETHOD. "get_parent_material
START-OF-SELECTION.
DATA : obj TYPE REF TO c1.
CREATE OBJECT obj.
CALL METHOD obj->get_bom_numbers
IMPORTING
t_stpo = it_stpo.
CALL METHOD obj->get_parent_material
EXPORTING
im_stpo = it_stpo
IMPORTING
ex_mast = it_mast.
Regards,
Rich Heilman -
How to Populate Internal table data to Table Control in a Report Program
Dear All,
How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph ReddyIf you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
into corresponding fields of table imara
from mara
inner join makt
on mara~matnr = makt~matnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman
Maybe you are looking for
-
Is there a way to create a save preset?
Basically what I'd like to do is, when I go to "save as" it will default it to a psd rather then a jpg. Thats all I want! Is this possible? This way I don't have to constantly select psd and just type the name and be done with it. Thanks in advance!
-
Cannot resolve symbol class graphics
does anyone know what the error cannot resolve symbol class graphics means? with this code i can't seem to call the graphics method to draw the line....any reason why? import javax.swing.*; import java.*; public class LineDraw extends JFrame { pu
-
I'm new but...
I'm already frustrated with my mac.. This might not be such a very big problem, but cannot play a simple game like Braid without get my brand new MBP 17" antiglared hot... It's just unfair... and also don't feel the graphics are doing a good job. Scr
-
Help with changable windows.
Hi all, I'm a newbie to this forum but I'll just cut to the chase. I have been implementing a GUI using Swing which is set up and looks fine. It consists or Radio buttons along the top and a series of labels and text panels relating to them below. Ho
-
Not able to distribute the model
Hi I created a model using BD64 according to the procedure to the best of my knowledge. But i am getting the following error "Model view has not been updated. Reason: the distribution model is currntly being processed." Nobody else are logged in. Can