How to create Linked Partition?

I have to implement linked partitioning;
Does it require any users to be created in shared services for it.
Please give a brief answer.........
Urgent!!!!!!

Hi,
You need to create an user for partition to communicate between source & target applications.
More information on creating & managing partitions can be found at the link given by Rahul.
- Krish

Similar Messages

  • How to create GPT Partition for onekey recovery windows8

    Plz any one can help me.....
    i have purchased laptop last week with following configurations:
    Lenovo  G510 i5 2.5ghz with windows 8 and OneKey recovery feature.
    My laptop was with windows 8 but i upgrade my hard drive 500 GB to 1 TB.
    But now i am unable to recover my windows8 image by using OneKeyrecovery (novo).
    So plz help me how to craete GPT partition style that will support for onekey recovery and recover Windows 8 image that is in my external hard drive.
    Please send me the complete procedure to create GPT partition style supported for onekey recovery.
    Also solve the following questions plz.
    1. How to create GPT partition style supported for onekey recovery?
    2. Total Number of partitions and their actual sizes.
    3. Size of C:
    4. Size of D:
    5. Size of recovery partition
    6.Size of all partitions
    Plz reply me at: ********@yahoo.com
    Regards: Aamir
    Moderator note: email address removed to keep away from the spambots.
    Solved!
    Go to Solution.

    Dear Customer
    Welcome in lenovo community
    Please use the below link to download and install the Lenovo Recovery application so that you can do what you looking for 
    Link : http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035708
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • How to create recovery partition in new(changed) HDD.

    my new HP pavilion g4 laptop HDD have crased, then I replce it by HP care. I upload original win 7 by recovery disk(DVD) but when I open my computer it shows only one partition (C drive, there is no recovery partition and HP tool.
    So how to creates recovery partition by recovery disk(DVD)...........please help me.

    Creating the recovery partition
    Right-click the start orb, and start 'Disk Management'.
    Shrink the C: drive by let's say 20-30GB.
    Then create a new Partition and assign the R: label to it and name it RECOVERY.
    Then open command prompt as administrator and type: 'recimg /createimage <directory>',
    In this case: 'recimg /createimage R:\' to save it on the new partition.
    This step may consume a lot of time.
    Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
    'recimg /setcurrent R:\'
    Voila you are done.
    Restoring from recovery partition
    You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
    Press the Windows-key + C to open the charms bar or swipe in from the right.
    Click Settings.
    Click Change PC Settings.
    Click Update & Recovery in the menu on the left.
    Click Recovery.
    If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

  • How to create DB partitioning in active data tables for ods?

    hi all,
    Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
    regds
    haritha

    Haritha,
    The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
    transaction RSCUSTA2,
    oss note 120253 565725 670208
    and remove 'bex reporting' setting in ods if that ods not used for reporting.
    hope this helps.
    565725
    Symptom
    This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
    Other terms
    Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
    Solution
    To obtain a good load performance for ODS objects, we recommend that you note the following:
    1. Activating data in the ODS object
    In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
    1. Creating SIDs
    The creation of SIDs is time-consuming and may be avoided in the following cases:
    a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
    b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
    SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
    1. DB partitioning on the table for active data (technical name:
    The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
    1. Indexing
    Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
    1. Loading unique data records
    If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
    Hope this helps..
    ****Assign Points****
    Thanks,
    Gattu

  • How to create links in table view

    Hi
    I am working in IC WebClient.
    Can any body guide me how to create link on particular column of the table view and How can we navigate to another page by clicking on this link ?
    I am filling the internal table (for table view) by z tables. I do not have context node for that.
    Points will be rewarded.

    use Iterators. In the itarator you can create any BSP Object you wish to.
    in the method RENDER_CELL_START of the interface IF_HTMLB_TABLEVIEW_ITERATOR
    METHOD if_htmlb_tableview_iterator~render_cell_start.
      DATA: lo_text     TYPE REF TO cl_htmlb_textview,
            lo_link TYPE REF TO cl_htmlb_link,
            lv_link_click TYPE string,
            lv_link  TYPE string,
            lv_dim   TYPE string,
            lv_pernr TYPE string.
      FIELD-SYMBOLS: <dat> TYPE ANY.
      lv_link  = 'info.htm?pernr='.
      lv_dim   = 'left=300,top=220,width=620,height=200,menubar=0,scrollbars=yes,resizable=no'.
      row_ref = p_row_data_ref.
      CASE p_column_key.
        WHEN 'PERNR'.
          CREATE OBJECT lo_link.
          lo_link->id            = p_cell_id.
          lo_link->text          = get_column_value( p_column_key ).
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
            EXPORTING
              input  = lo_link->text
            IMPORTING
              output = lv_pernr.
          CONCATENATE `window.open('` lv_link lv_pernr `' , '` lo_link->text `', '` lv_dim `');` INTO lv_link_click.
          lo_link->text = lv_pernr.
          lo_link->onclientclick = lv_link_click.
          p_replacement_bee      = lo_link.
        WHEN OTHERS.
          CREATE OBJECT lo_text.
          lo_text->id       = p_cell_id.
          lo_text->wrapping = 'FALSE'.
          lo_text->text     = get_column_value( p_column_key ).
          lo_text->design   =  'STANDARD'.
          p_replacement_bee = lo_text.
      ENDCASE.
    ENDMETHOD.
    How to use Iterators.
    /people/brian.mckellar/blog/2003/10/31/bsp-programming-htmlb-tableview-iterator
    Hope this helps.
    Cheers
    Amandeep
    <i><b>Reward points for each helpful answer.</b></i>

  • How to create links to other pages i create??

    I have finished my "homepage" and it has 5 buttons on it.("home",
    "Contact us", etc.).
    I have no idea how to create links to other pages i create.
    For example, if the user clicks on "Contact us", i wnat contact information
    to appear. So, do i create another html document that will contain contact
    information and then call that page whenever the user clicks "Contact us". Or
    do i just create another applet that contains contact information and display
    the applet in the appropriate area, whenever the user clicks "contact us".
    Hope that wasnt confusing. Bascially, I am sitting here looking at my buttons, not knowing
    what code to put under the actionPerfomed part of each button.
    thanx
    trin

    ... judging from your question... the best way i think is to create another page...
    .... so when ur user clicks on Contact Us..... he/she will be taken to another page...
    there are other techniques besides this.... but it is always better to stick with the easiest one
    ... so you need to create separate pages for all of your links....
    ... if you have any questions... let me know
    .... have fun

  • How to create links and how to use that links to go to other pages?

    my question is....how to create links...i mean by using make link option.....when we do right click on a word,etc in the design view.....and my other question is.....how to use that links to go to other pages.....i mean when i click on a link...it takes me to another web page.....

    Please do not post the same subject to more than one forum.

  • How to create links to the same page, how to create links to the same page

    How to create link to the same page with iweb?
    Thanks

    You're referring to anchors.  There are a couple of ways. These topics discuss them:
    iWeb FAQ - Anchors
    How do i hyperlink to certain portion...: Apple Support Communities
    OT

  • How to create links betwen two documents in KM?

    how to create links betwen two documents in KM?

    If you use the KM provided HTML editor, there is an option to provide a link to another KM document from one KM document.
    Else if its an uploaded HTML, create a link like this:
    <a href="/irj/go/km/docs/documents.....">CLICK</a>

  • How to create a partition on existing table?

    Hey
    Could some one please tell me on how to create a partition on existing table?

    Could some one please tell me on how to create a partition on existing table?
    You can't - that isn't possible. Unless a table is already partitioned you can NOT create another partition on it.
    You must either redefine the table as a partitioned table (using the DBMS_REDEFINITION package) or create a new partitioned table and move the data to its new partitions.
    The choice will depend on how much data the existing table has and whether you can do it offline.

  • I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?

    I want to attach the link to text which gives the name of the site. I am not an idiot, just unfamiliar with the program. I have looked through the learning videos but cannot find anything that specifically relates to my question. I appreciate any help I can get. Thank you, in advance, for any assistance.
    Sue

    I am unable to open the screen shots as I keep getting a message saying that I am not using the correct program. Can you tell me which program I should use? Thank you.
    Sue
    Date: Mon, 22 Jul 2013 10:48:46 -0700
    From: [email protected]
    To: [email protected]
    Subject: I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?
        Re: I feel like a rookie but, can someone tell me how to create links to external URLs in Muse?
        created by spudsmurphy13 in Help with using Adobe Muse CC - View the full discussion
    good question sue, and well done to all for how to do links.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5527823#5527823
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5527823#5527823
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5527823#5527823. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to create a partition using the free space of an existing[SOLVED]

    Hi Guys,
    Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
    Thanks.
    Please see this post:
    https://bbs.archlinux.org/viewtopic.php?id=109402
    Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

    Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
    Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
    Older computer:
    2 GB ntfs - MicroXP
    8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
    20 GB ntfs - games partition
    Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
    New computer:
    20 GB Windows 7
    10 GB Arch Linux + home dir
    50 GB games partition
    Rest of the space is ext4 mounted to /media
    Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
    Last edited by DSpider (2010-12-03 13:02:26)

  • How to create another partition on mac and restore from time machine

    I want to create another partition on my macbook running on OS X Yosemite. I want to recover a time machine back up on this partition. Basically this is a backup of my other old PC which I saved on a time machine external hard disk and now I want to create it as a new separate partition which I can log into to as opposed to continuous to connected to it via USB.
    Any advise on how I can do that?

    Hi Patrick,
    Thanks for the that great tip.
    In that time machine back up I have some applications for e.g. MS office etc and I wanted it to be like a virtual machine as such that I launch when I want to use the applications, see my data etc....I have bought parallels as that allows you to have multiple virtual machines on your laptop whether these are multiple mac images as time machine backups or linux, Microsoft Windows 7, 8 etc....
    Thats what I eventually want to do here...
    This feature that you provided is also of good reference for me in future.

  • How to create links in Pages through certain words or phrases?

    I need to create links within a document for a college course I'm working on. For example I would need the word flu in a pages document to link to the site flu.gov. Does anyone have tips on how to do this?

    Here is a better explanation of what I'm trying to do for example I have to write a review of a website and I need post various links but I can't post the URL's I have to post the URLs somehow within some of the text of the review for example I would the words flu prevention would somehow to have to link to page from the flu.gov site

  • How to create new partition on a brand-new Satellite P50T-A0EE?

    Hi,
    I bought a Toshiba, Satellite P50T-A0EE SLV laptop yesterday with installed Win 8, in Adelaide. First, I realised that only one C:/ partition is available and no additional partition is created for data and for some reason, already 150 GB is used on the C:/ by the factory installed software.
    Moreover, checking the disk management, it came up that four primary partitions exist.
    One is the C:/, two others are called Healthy (Recovery Partition), and one is the Healthy (EFI System Partition).
    As I read up about it, a fifth primary partition is questionable to create, maybe even not supported.
    When I just started to launch on C:/ the 'shrink volume' command, much less space was offered to use than it was displayed as free under file manager.
    Could someone help, please how to create a separate partition with a reasonable size (600 GB at least from the 1Tb) for data? I would not like to keep my data files on a same partition with windows.
    Thanks,
    Gerti

    Hi dude,
    Before you would start to modify the HDD partitions table, I recommend strongly to create an Toshiba Recovery Medium using the preinstall software/tool called Toshiba Recovery Media Creator.
    This software creates either the recovery disks (DVDs) or Recovery USB flash memory.
    Its very important to create such medium in case you would like to go back to the factory state.
    After that you could use an open source software like Gparted tool to create the partitions and to modify the HDD partitions table.
    http://gparted.org/liveusb.php
    Note: the partitions which are already available on the HDD contain the Toshiba recovery image which allows you to recover the notebook from HDD. But this is possible only in case the HDD partitions table has not been modified in the past.

Maybe you are looking for