How to create multiple context in openGL and different mode to drawGL

Hi,
I need to create cartoon image from original image, so i searched about it and i got GLImageProcessing source code. But it could do one thing at a time like brightness, hue, saturation etc.
I think i need to apply different mode to single draw only then i could get cartoon image. Does anyone know that how to do this?.
Or else anyone knows that how could i achieve this cartoon from original image.
Regards,
iphonemobdev.

Hi Balamurugan,
I don't want to sound rude, but, you have posted your issue three times. Each one, I recommended that you go through the WLC Configuration Guide. I recommended this because you are new to WLC and it's the best way for you to learn.
However, you recent post has led me to believe that you are reluctant to peruse the document and I am puzzled. Is there any reason of your reluctance and hesitance?
Cisco Wireless LAN Controller Configuration Guide, Release 6.0
http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/Controller60CG.html

Similar Messages

How to create multiple instance of Jboss with different port number

Hi all
Please tell me steps to create multiple instance of Jboss with diffrent port number.
I tried with this steps, but it does not work for me.
In conf/jboss-service you will find the binding manager.
   <mbean code="org.jboss.services.binding.ServiceBindingManager"
     name="jboss.system:service=ServiceBindingManager">
     <attribute name="ServerName">ports-01</attribute>
     <attribute name="StoreURL">../docs/examples/binding-manager/sample-bindings.xml</attribute>
     <attribute name="StoreFactoryClassName">
       org.jboss.services.binding.XMLServicesStoreFactory
     </attribute>
   </mbean>Please help me on this.
Thanks in advance

It is the name of the website for JBoss. That seems rather obvious to me, and you would have found out for yourself if you had tried it.
Your question is not a Java question and doesn't belong in these forums. It is a JBoss question and you should ask there, or more probably have a look at the JBoss documentation first.

How to create multiple segments on the target structure of an IDOC

Hi All
I am working on the Shipment Confirmation Interface( Message Type SHPCON ) which is FILE to IDOC Scenario. I have a segment called E1EDL18 which occurs only once on the target side of the idoc. Now I have to created multiple E1EDl18 segments for the Qualifiers ORI, PGI and PCK. I treid to send a constant ORI,PGI,PCK and then used an user defined function which splits the constant at COMMA and then I am assigning to the target field QUALF. In the display queue for QUALF I see three values with context but still only one E1EDL!* segment is created. Please let me know how to create multiple E1EDl18 segments for three qualifiers.
Thanks
Naga

In message Mapping, just right click on the segment and click on duplicate subtree. now it will create you another segment with same name and fields in it..
you can hard code the Qual, or you can map the required source field into it.

How to create multiple instance on same database

Hi ,
I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it.
Any how if some one can help me with this and can give me links of this it would be great help for me.
Thank you for reading my problem and helping me !
Amil
please if possible mail me on [email protected]

How to create multiple instance?????Do you mean multiple instances on the same database, or multiple databases on the same machine ?
I m new to this field....
Willin to learn a lot about oracle....Then it wouldn't be bad reading a bit of Database Concepts

How to create dynamic context based on a structure defined in the program?

Hi Experts,
         I need to create a dynamic context based on a structure wa_struc which i have define programatically.
When I pass wa_struc to structure_name parameter of create_nodeinfo_from_struc, i get a runtime error:
"Parameter STRUCTURE_NAME contains an invalid value wa_struc."
How to create dynamic context based on a structure defined in the program?
I have written the code like this:
TYPES: BEGIN OF t_type,
            v_carrid TYPE sflight-carrid,
            v_connid TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
         wa_struc type t_type.
data: dyn_node   type ref to if_wd_context_node.
data: rootnode_info   type ref to if_wd_context_node_info.
rootnode_info = wd_context->get_node_info( ).
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = 'dynflight'
structure_name = 'wa_struc'
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( name = 'dynflight' ).
dyn_node->bind_table( i_struc ).
Thanks
Gopal
Message was edited by: gopalkrishna baliga

Hi Michelle,
          First of all Special thanks for your informative answers to my other forum questions. I really appreciate your help.
Coming back to this question I am still waiting for an answer. Please help. Note that my structure is not in a dictionary.
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
I have updated my code like the following and I am getting error:
TYPES: BEGIN OF t_type,
CARRID TYPE sflight-carrid,
CONNID TYPE sflight-connid,
END OF t_type.
Data: i_struc type table of t_type,
dyn_node type ref to if_wd_context_node,
rootnode_info type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
wa_node_att-name = 'CARRID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
insert wa_node_att into table i_node_att.
wa_node_att-name = 'CONNID'.
wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
attributes = i_node_att
is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
But now I am getting the following error :
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
-Gopal
Message was edited by: gopalkrishna baliga

How to send multiple records in file2file and file2db or all scenarios//

I'm able to send single record for file2file and file2db,
how to send multiple records in file2file and file2db or all scenarios//
what should add or make changes for dis.

1 put Occurance 1 to Unbounded in data type of IR
2 In the test tag of message mappings in IR,select one node and use "duplicate subtree" in its context menu
After that,you can download the test data in XML format with the button "save document source"
for example:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ZFileDemo xmlns:ns0="http://hand-china.com/mm/po_01">
- <Item>
<ItemNo>1</ItemNo>
<Matnr>2</Matnr>
<Text>3</Text>
</Item>
- <Item>
<ItemNo>4</ItemNo>
<Matnr>5</Matnr>
<Text>6</Text>
</Item>
</ns0:ZFileDemo>

How to create multiple toolbar buttons in jsp ?

hi all,
how to create multiple toolbar buttons in jsp ?
plz help me

mgmt
plzhttp://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to create Implicit Fact column ?and how to use it ?

Hi all,
How to create Implicit Fact column ?
and how to use it ?
Thanks in advance

When you create a request with only dimension columns, the Oracle BI engine has to choose a fact table to join the dimensions to each other. If you have multiple fact tables in your BMM layer, the Oracle BI engine will use the most economical fact table, depending on the number of dimensions of the fact table.
In some cases you do not want to use this fact table, but you want to force the Oracle BI engine to use the fact table you want.
In that case you should create a fact (or select an existing fact) of the fact table you want to use for the dimension only query. In the presentation catalog of the subject area you should select this fact as the implicit fact. This fact will always be used in the query, but it won't be visible in your report. An example of an implicit fact is the count of the primary key (id) of the fact table.

How to create multiple Idocs in SAP R3 ?

I have been asked question on Idocs from MNC company.
How to create multiple idocs in R3 ? Please let me know.

hi ,
if you want to create in multiple IDOCS in XI , take XSD of IDOC and chnage the occurance to 1 to UNBOUNDED, you can genarate multiple IDOCS.
Regards,
Raj

How to create multiple ifs users using XML

I used the following xml file to create a ifs user. But I don't know how to create multiple users using XML. Thanks for your help.
<SimpleUser>
<UserName>bill</UserName>
<Password>bill</Password>
<DirectoryUserDescription>Bill</DirectoryUserDescription>
</SimpleUser>

There are many good resources for Powershell tutorials. The MS help page for each cmdlet is usually a good place to start.
The suggested answer is very good and easy to modify to your needs. The linked article provides good detail on creating your csv file. If you look at their sample csv, you will see the column for LicenseAgreement and UsageLocation. You can change the script
to use the values from the csv instead of the same value for every user like so:
-LicenseAssignment $_.LicenseAgreement -UsageLocation $_UsageLocation
Basically, $_.<valuename> is the filled in by the value under the heading <valuename> in your csv file for the current user.
As for what msdivision, replace this with the correct domain name value for your organization. You can get the values for license SKUs from existing users by using the following:
Connect-MsolService
Get-MsolUser -UserPrincipalName <userprincipalname> |select Licenses

How to create multiple physical channels using DAQmx?

Hi, I am new to Labview.
Can anyone please help me on how to create multiple physical channels? I am following the LabVIEW examples in the NI example finder but they are only for acquiring signals from one channel.
Actually, I am using the channels of an SCXI 1520 to measure voltage signals. And one more thing, in the NI Example Finder, they are sample codes there for setting the filter in SCXI 114x.
Will this example work with an SCXI 1520, too?
Thanks!

There are many ways to read multiple channels in LabVIEW. First, if you look at that example that lets you set the filter setting on the 114x and you click on the 'Physical Channel Listbox' then click 'Browse' you can see that you can select multiple channels. After you select the channels and hit 'Ok' it will build a multiple channel string. This is one way to read multiple channels.
Next, you can create a 'Task' in Measurement and Automation Explorer(MAX). When you create this task select all the channels that you need to read then back in LabVIEW simply select a 'DAQmx Task Name Constant' Select the task you just created and wire that to an Input of your first DAQ VI. If you do this you do not need to have a 'DAQmx Create Physical Channel' VI or create
Task because it is already created in MAX.
When looking at example VIs you can tell if a multi-channel read is acceptable by looking at the 'DAQmx Read' and if it says NChan that means it will do a multichannel read. There are tons of example programs that will display the multichannel read capabilities.
This example may not work for the 1520 because the properties that are set could possibly be specific to the 142x. When using the 1520 though it is very likely that the properties will be very similar if not exact. You will simply put a DAQmx Channel property node on your block diagram and then look for the Lowpass filter settings properties that will most likely be in the same location. Now another way todo this without using a property node would be in MAX when you create a task set the filter settings from the Device tab in the task configure window.
Let me know if you need anymore help with reguards to this issue! Have a great day!
Allan S.
National Instrument
s
Applications Engineering

How to Create Multiple Distribution Groups

How to Create Multiple Distribution Groups using power shell?
i have created new csv file with below format
Name,Type
Test01,Distribution
test02,Distribution
Executed below command and it's prompting for each and every account to enter the sam account name.
[PS] C:\Windows\system32>Import-CSV "c:\dl\users.csv" | foreach {new-distributiongroup -name $_.name type $_.Type}
cmdlet New-DistributionGroup at command pipeline position 1
Supply values for the following parameters:
SamAccountName:
is there any other way to create bulk DL groups?
Aucsna

Please check this here is a similar thread.
http://social.technet.microsoft.com/Forums/exchange/en-US/0f86bb8a-63a2-44e5-921f-4a227221e71d/creating-distribution-groups
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

How to retrieve multiple data from table and represent it in jsp page

Hi
The below JavaScript code is used to add row in the table when I want to add multiple row data into table for single entry no field.
<html> function addRow()
            i++;
            var newRow = document.all("tblGrid").insertRow();
            var oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='srno"+i+"' type='text' id='srno"+i+"' size=10>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmcd"+i+"' type='text' id='itmcd"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='itmnm"+i+"' type='text' id='itmnm"+i+"' size='15'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='indentqty"+i+"' type='text' id='indentqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
                oCell.innerHTML = "<input name='uom"+i+"' type='text' id='uom"+i+"' size='10'><input type='hidden' name='mcode"+i+"'id='mcode"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packqty"+i+"' type='text' id='packqty"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='packuom"+i+"' type='text' id='packuom"+i+"' size='10'><input type='hidden' name='pack"+i+"' id='pack"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='rate"+i+"' type='text' id='rate"+i+"' size='10'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='dor"+i+"' type='text' id='dor"+i+"' size='0' onClick='"+putdate(this.name)+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='bccode"+i+"' type='text' id='bccode"+i+"' size='10'></td><input type='hidden' name='bcc"+i+"' id='bcc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='cccode"+i+"' type='text' id='cccode"+i+"' size='10'></td><input type='hidden' name='ccc"+i+"' id='ccc"+i+"'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input name='remark2"+i+"' type='text' id='remark2"+i+"' size='20'>";
            oCell = newRow.insertCell();
            oCell.innerHTML = "<input type='button' value='Delete' onclick='removeRow(this);' />";
           // oCell = newRow.insertCell();
           // oCell.innerHTML = "<input type='button' value='Clear' onclick='clearRow(this);' />";
        }<html> Then this data are send to the next Servlet for adding into two table.
My header portion data are added into one table which added only one row in table. while footer section data are added into the no of rows in another table dependent on No. of
Rows added into jsp page.
Here is an code for that logic.
<html>
ArrayList<String> mucode = new ArrayList<String>();
                            ArrayList<Integer> serials = new ArrayList<Integer>();
                            ArrayList<Integer> apxrate = new ArrayList<Integer>();
                            ArrayList<Integer> srname = new ArrayList<Integer>();
                            ArrayList<String> itcode = new ArrayList<String>();
                            ArrayList<String> itname = new ArrayList<String>();
                            ArrayList<Integer> iqnty = new ArrayList<Integer>();
                            ArrayList<String> iuom = new ArrayList<String>();
                            ArrayList<Integer> pqnty = new ArrayList<Integer>();
                            ArrayList<String> puom1 = new ArrayList<String>();
                           ArrayList<Integer> arate = new ArrayList<Integer>();
                            ArrayList<String> rdate = new ArrayList<String>();
                            ArrayList<String> bcs = new ArrayList<String>();
                            ArrayList<String> ccs = new ArrayList<String>();
                            ArrayList<String> remarkss = new ArrayList<String>();
                            //ArrayList<Integer> qtyrecs = new ArrayList<Integer>();
                            //ArrayList<String> dors = new ArrayList<String>();
                            //ArrayList<String> remarks = new ArrayList<String>();
                 String entryn = request.getParameter("entryno");
                    String rows = request.getParameter("rows");
                    out.println(rows);
                    //String Entryno = request.getParameter("entryno");
                   // out.println(Entryno);
                  int entryno = 0,reqqty = 0,srno = 0,deprequest = 0,rowcount = 0;
                            if(!Entryno.equals("")){
                                    entryno = Integer.valueOf(Entryno);
                            if(!rows.equals("")){
                                    rowcount = Integer.valueOf(rows);
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            serials.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                                            out.println(serials.size());
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("srno"+i)!=null){
                                            srname.add(Integer.valueOf(request.getParameter("srno"+i).trim()));
                            out.println(srname.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmcd"+i)!=null){
                                            itcode.add(request.getParameter("itmcd"+i).trim());
                                    } //out.println(itcode.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("itmnm"+i)!=null){
                                            itname.add(request.getParameter("itmnm"+i).trim());
                                    }//out.println(itname.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("indentqty"+i)!=null){
                                            iqnty.add(Integer.valueOf(request.getParameter("indentqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("uom"+i)!=null){
                                            iuom.add(request.getParameter("uom"+i).trim());
                                    }//out.println(iuom.get(i));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("mcode"+i)!=null){
                                            mucode.add(request.getParameter("mcode"+i).trim());
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("packqty"+i).equals("")){
                                      pqnty.add(0);
                                    }else
                                        pqnty.add(Integer.valueOf(request.getParameter("packqty"+i).trim()));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("pack"+i)!=null){
                                            puom1.add(request.getParameter("pack"+i).trim());
                                   }else
                                    puom1.add("");
                           for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i).equals("")){
                                        arate.add(0);
                                    }else
                                    arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                 /* for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("rate"+i)!=null){
                                            arate.add(Integer.valueOf(request.getParameter("rate"+i).trim()));
                          for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dor"+i)!=null){
                                            try{
                                                    rdate.add(dashdate.format(slashdate.parse(request.getParameter("dor"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                                    }else
                                       { rdate.add("");}
                               for(int i=1;i<=rowcount;i++){
                             if(request.getParameter("bcc"+i)!=null){
                                            bcs.add(request.getParameter("bcc"+i).trim());
                                    }out.println(bcs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("ccc"+i)!=null){
                                            ccs.add(request.getParameter("ccc"+i).trim());
                                    }out.println(ccs.get(0));
                            for(int i=1;i<=rowcount;i++){
                                out.println("remark2");
                                    if(request.getParameter("remark2"+i)!=null){
                                            remarkss.add(request.getParameter("remark2"+i).trim());
                                    }out.println(remarkss.get(0));
                    ArrayList<String> Idate = new ArrayList<String>();
                    for(int i=1;i<=rowcount;i++){
                                    if(request.getParameter("dateindent"+i)!=null){
                                            try{
                                                    Idate.add(dashdate.format(dashdate.parse(request.getParameter("dateindent"+i).trim())));
                                            }catch(ParseException p){p.printStackTrace();}
                String Rdate = dashdate.format(new java.util.Date());
                 String tdate = dashdate.format(new java.util.Date());
                 // String Indentdate = dashdate.format(new java.util.Date());
               // String ApprovedT1 = dashdate.format(new java.util.Date());
               // String ApprovedT2 = dashdate.format(new java.util.Date());
                   // String ApprovedT1=" ";
                    //String ApprovedT2="";*/
                String ApprovedT1= dashdate.format(new java.util.Date());
               out.println (ApprovedT1);
                  String ApprovedT2=dashdate.format(new java.util.Date());
                   out.println(ApprovedT2);
                String Indentdate=(dashdate.format(slashdate.parse(request.getParameter("dateindent").trim())));
                   out.println(Indentdate);
                    String Cocode ="BML001";
                    out.println(Cocode);
                    String Deptcode = request.getParameter("dept1");
                    out.println(Deptcode);
                    String Empcode = request.getParameter("emp");
                    out.println(Empcode);
                    String Refno =request.getParameter("rtype");
                     out.println(Refno);
                    String Divcode = request.getParameter("todiv1");
                    out.println(Divcode);
                    String Usercode = "CIRIUS";
                     String Whcode = request.getParameter("stor");
                    out.println(Whcode);
                    // String Itemgroupcode = request.getParameter("");
                     String Itemgroupcode ="120000";
                     out.println(Itemgroupcode);
                    String Supplytypecode = request.getParameter("stype");
                    out.println(Supplytypecode);
                    String Delcode = request.getParameter("deliverycode");
                    out.println(Delcode);
                    String Itemclass="WS";
                    out.println(Itemclass);
                    // String Itemclass = request.getParameter("iclass");
                   // out.println(Itemclass);
                    String unitcode = request.getParameter("uni");
                    out.println(unitcode);
                     String Todivcode = request.getParameter("todiv1");
                    out.println(Todivcode);
                    String Appxrate = request.getParameter("rate");
                    out.println(Appxrate);
                    String Srno = request.getParameter("srno");
                    out.println(Srno);
                /*    String Indqty = request.getParameter("indentqty");
                  out.println(Indqty);*/
              String Itemcode = request.getParameter("itmcd");
                   out.println(Itemcode);
                   String Othersp = request.getParameter("remark1");
                    out.println(Othersp);
                    String Reqdt = request.getParameter("dor");
                    out.println(Reqdt);
                    String Munitcode = request.getParameter("mcode");
                    out.println(Munitcode);
                    String Packqty = request.getParameter("packqty");
                    out.println(Packqty);
                    String Packuom = request.getParameter("pack");
                    out.println(Packuom);
                    String Remark2 = request.getParameter("remark2");
                    out.println(Remark2);
                    String BC = request.getParameter("bcc");
                    out.println(BC);
                    String CC = request.getParameter("ccc");
                    out.println(CC);
                    try{
                        st=connection.createStatement();
                        connection.setAutoCommit(false);
                        String sql="INSERT INTO PTXNINDHDR(COCODE,DEPTCODE,EMPCODE,APPROVEDT1,APPROVEDT2,INDDT,ENTRYNO,REFNO,REMARKS,DIVCODE,USERCODE,WHCODE,ITEMGROUPCODE,SUPTYPECODE,DELCODE,UNITCODE,TODIVCODE,ITEMCLASS)VALUES('"+Cocode+"','"+Deptcode+"','"+Empcode+"','"+ApprovedT1+"','"+ApprovedT2+"','"+Indentdate+"',"+Entryno+",'"+Refno+"','"+Othersp+"','"+Divcode+"','"+Usercode+"','"+Whcode+"','"+Itemgroupcode+"','"+Supplytypecode+"','"+Delcode+"','"+unitcode+"','"+Todivcode+"','"+Itemclass+"')";
                        out.println(sql);
                        st.addBatch(sql);
                        for(int i=0;i<serials.size();i++){
                            out.println("Inside the Statement");
                            String query3="test query for u";
                            out.println(query3);
                           String queryx="Insert into PTXNINDDTL(APXRATE,ENTRYNO,BRKNO,INDQTY,ITEMCODE,OTHERSPFCS,MUNITCODE,PACKQTY,PACKUOM,REMARKS,DIMSUBGRPCODE,DIMCODE,REQDT)VALUES("+arate.get(i)+","+entryno+","+srname.get(i)+","+iqnty.get(i)+","+itcode.get(i)+",'"+Othersp+"','"+mucode.get(i)+"',"+pqnty.get(i)+",'"+puom1.get(i)+"','"+remarkss.get(i)+"','"+bcs.get(i)+"','"+ccs.get(i)+"','"+rdate.get(i)+"')";
                           out.println(queryx);
                            st.addBatch(queryx);
                       int[] result=st.executeBatch();
                       connection.commit();
                       for(int k=0;k<result.length;k++)
                       out.println("rows updated by "+(k+1)+"insert sta:"+result[k]+"");
                    catch(BatchUpdateException bue)
                    out.println("error1;"+bue+"");
                    catch(SQLException sql)
                    out.println("error2;"+sql+"");
                    catch(Exception l)
                    out.println("error3;"+l+"");
</html>
   Now I looking for to retrieve this footer section data available in multiple rows from footer table and present it in jsp page .
I am finding difficulties in how to show this multiple row data for dynamic no of rows .i.e. variable no. of rows.
I have able to show the data in Header portions of page in this ways
here i am adding the part of code which shows the data from header part of table i.e from Header table
<html>
<h2 align="center"><b>Indent Preparation</b></h2>
    <div align="left">
        <table width="849" border="0" cellspacing="3" cellpadding="3" align="center">
            <tr>
                <td ><div align="left"><b>Indent No.</b></div></td>
                <td ><label>
                        <input name="indentno" type="text" id="indentno" size="15" value="" /><input type="hidden" name="no" id="no">
                </label></td>
                <td ><div align="center"><strong>Indent Date</strong></div></td>
                <td ><label>
                        <div align="center">
                            <input name="dateindent" type="text" id="dateindent"value="<%=date1%>"/><input type="hidden" name="no" id="no">
                        </div>
                </label></td>
                <td> </td>
                <td><div align="right"><strong>Entry No.</strong></div></td>
                 <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
        <td><input type="text" value="<%=hdrcode.get(3)%>" size="10"></td>
<%}else{%>
               <td><input type="text" name="entryno" id="entryno" value="<%=entryNo%>"/></td>
                         <%}%>
                        <div align="right"></div>
            </tr>
            <tr>
                <td><b>Division</b></td>
                <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(9)%>" size="20"</td>
<td><input type="hidden" name="div1" id="div1" value='<%=hdrcode.get(10)%>'></td>
<%}else{%>
               <td><input type="text" name="div" id="div" /></td>
               <td><input type="hidden" name="div1" id="div1" /> </td>
          <%}%>
                <td> </td>
                <td> </td>
                <td><div align="right"><strong>Unit</strong></div></td>
               <%if(oper!=null && oper.equals("view") && hdrcode!=null && hdrdetails!=null){%>
<td><input type="text" value="<%=hdrdetails.get(14)%>" size="20"</td>
<td><input type="hidden" name="uni" id="uni" value='<%=hdrcode.get(12)%>'></td>
<%}else{%>
               <td><input type="text" name="unit" id="unit" /></td>
               <td><input type="hidden" name="uni" id="uni" /> </td>
          <%}%>
            </tr>
            <tr>
</html>
Any suggestion on any above works is highly appreciated.
Thanks and regards
harshal

Too much code. It's also not well intented nor formatted. I don't see a question either or it got lost in that heap of unformatted code.
I will only answer the question in the thread's subject:
How to retrieve multiple data from table and represent it in jsp pageTo retrieve, make use of HttpServletRequest#getParameterValues() and/or #getParameter().
To display, make use of JSTL's c:forEach.

How to create custom infotype for training and event management

hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzal

Hi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini

How to create multiple context in openGL and different mode to drawGL

Similar Messages

Maybe you are looking for