How to create OSB cluster

HI All ,
I have to create an OSB cluster across different machines .
Can I get a detailed steps of how to create a cluster across machines using node manager .
I am using osb 11gR2 .Please let me know the exact steps .

You can bundle two or more wires together using the 'bundle function' - the output is a cluster. This is the top example.
The other way is drop the constand cluster and drag any constants (like the numeric and string) into the cluster. This is the lower example in the VI snippet. You can also do this on the frontpanel - drop the cluster constant on the frontpanel and drag any controls or indicators into it. They have to be controls or indicators - you can't have a mix of both.
Also in case you are not familiar with the concept if you are working with big clusters you should 'type def' them. In LV2011 you do this by right-clicking on the block diagram and clicking 'make type def'. What this does is creates a separate file where the new cluster (or any other type of control) is saved. Then if you change the cluster - say add a boolean alogn with the numeric and string - the change happens and is propogated through your program. This stops you getting broken wires when you have two clusters wired together, you change one and not the other.
Regards,
Dave

Similar Messages

How to create a cluster on existing table

how to create a cluster on existing table

user8949393 wrote:
how to create a cluster on existing tableAFAIK you can't. You have to create the cluster from scratch, something like
--cluster key can be just one column also
CREATE CLUSTER s_emp_dept_ic (deptno NUMBER(7), dname varchar2(30));
CREATE TABLE emp(
DEPTNO NUMBER(7),
DNAME VARCHAR2(30),
EMPNO NUMBER(4),
ENAME VARCHAR2(30)
--cluster clause puts table in cluster. Deptno, dname are table columns in
--cluster key
CLUSTER s_emp_dept_ic (deptno,dname);
--a cluster index must be created before any data is inserted
--the index columns used come from the cluster key from CREATE CLUSTER
CREATE INDEX s_emp_idx ON CLUSTER s_emp_dept_ic;

How was created the cluster with keys in example: Sim Phone.vi

Hello all
I have LV 7.1.1
I have found the example: Sim Phone.vi
And I don't know how was created the cluster with keys?
Best regards
Iskander

It's just like any other cluster you create. Put a cluster container on the front panel and insert some Booleans. the actual Booleans are on the classic controls palette. The border of the cluster is also colored transparent with the paintbrush on the Tools palette.

Do someone knows how to create a cluster with two nodes on oracle VM Ware

dear members,
can someone guide us through creating a cluster with two nodes on oracle VM. it will be nice if we can virtualiza RAC, atleast for education purposes.
Thank you all in advance

Here is an excellent article that explains how to do this:
http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/

How to create a cluster, whose elements are all scattered across the front panel?

Hi everyone!
I've been designing a front panel, which (I think :-)) feels pretty well when the override switches are scattered all over the screen. Anyway I'd like to process their states in a cluster. I tried pulling them in a cluster in the block diagram, which didn't do anything (actually they hid underneath the cluster). I tried bundling them, but the only way I could do so was after creating a hidden cluster on the front panel and filling it with the same number of boolean controls as I've got override switches.
Anybody got any suggestions?
Kindest regards,
Severin

Severin,
You should be able to bundle the elements without creating a dummy cluster. You cannot use Bundle by Name without a control (or indicator), however.
One possibility, if you need a cluster, is to make a cluster which is bigger than your front panel. Make the background transparent or the same color as the panel. The problem with this is how you handle other controls or indicators which are not part of the cluster. You could put them behnid the transparent cluster, but then you cannot operate the controls and panel updates are slowed considerably by overlapping front panel objects. You may be able to slide them in front of the cluster without embedding them into the cluster by placing them on the panel outside the cluster and using the keyboard arrows to move them. This works for some things; I have not tried it with clusters. You still have overlapping objects.
Lynn

How to create a cluster table and cluster view?

Hi,
Can anyone guide me in creation of cluster table in general and also creation of cluster view?

Hi,
check this links.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f0b7446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/content.htm
Regard's
SHAIK.

How to create a cluster with a User control (.ctl) programatically using VI scripting?

Solved!
Go to Solution.

It seems that you hit the Post button before you had a chance to use the body of the message to give more detail on what you are trying to do.
Perhaps you can post whatever VI you have so far and also the user control you are trying to use.

How Can I create a cluster of two instances running on the same server?

Hello,
I can't find how to create a cluster or even a failover rule for my two instances running on the same server ODSEE 11gR1.
Could you please help?
Thanks,

Hello,
Clustering (intended as Sun Cluster, Veritas Cluster, etc... ) IS NOT SUPPORTED since 7.0:
http://docs.oracle.com/cd/E20295_01/pdf/821-1216.pdf [page 20]
and, based on my own experience, is the WORST way of achieving high availability of an LDAP Directory Service and an almost GRANTED way to get replication issues in your topology (lock, split, re-init, etc...).
Please use instead the 'application-level' clustering that you get out of the box with the Multi-Master Replication.
http://docs.oracle.com/cd/E20295_01/html/821-1217/index.html
http://docs.oracle.com/cd/E20295_01/html/821-1220/fhkry.html#scrolltoc
HTH,
Marco

Creating an OSB cluster but not with Configuration Wizard

Hi experts,
I would like to create an OSB cluster but not with Configuration Wizard. So my scenario for creating OSB cluster is:
- create an AdminServer with Configuration Wizard
- log into Administration Console and create two machines and a cluster
- start node managers
- configuration for starting servers automatically with node managers
After these steps I have a cluster with 2 managed servers which will start with the node manager. However these managed servers are appropriate for deploying normal Java applications but not OSB components...
My questions is what should I do with these managed servers to be able to deploy OSB components onto them?
Or can I create an OSB domain only with Configuration Wizard?
Thanks,
V.
Edited by: RickFlair on May 13, 2012 1:10 PM

Hi Pierluigi,
Thanks for the answer!
When I created the domain (with Configuration Wizard) I could set that the domain should be an OSB domain so I think I don't need this template afterwards.
If I create an OSB domain (with Configuration Wizard) with one AdminServer in it and later I add managed servers on the admin console then I get this message on the OSB Administration Console: Unable to obtain metrics data from the server. It means that something is wrong with the managed servers I can't use them properly.
However if I create an AdminServer and managed servers with Configuration Wizard then I don't get this error (or warning?) message.
Could you help me why it is?
Thanks,
V.

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How to create wizard for a custom mainenance view/view cluster

Hi Experts,
I have created 5 custom maintenance view and have maintained all the views sequencially and have made the first mainenance view as the start view & header entry and all other views are child or subview of the header view in a custom view cluster. But I want a wizard to help the user / end user successfully enter all the required values for all child views, it will help the user to navigate from the start view to all the child views where the fields of the wizard will be associated to the child maintenance views.
Please suggest how to create wizard for view cluster.
I'll give max reward point for the helpful answer.
Thanks in advance
koustav

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field <b>FORM routines main program</b>. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

How can I create a cluster on the fly?

I'm inserting rows in a database table as part of a logging effort for our program. The table in question has a lot of columns, many of which can be null at any particular time. As such, I'd like to decide at run time (as situations warrant) which columns get a value when I add the new row. The columns are of mixed data types... some strings, some floats, some ints, etc.
For example...
On one pass, I'd like to populate columns "temp", "volume", and "weight".
On another pass, I may want to populate columns "temp", "color", and "notes".
I gen the array of column names. That part's easy
How (in the world) do I create the cluster that feeds the DATA input of the "DB Tools Insert Data" VI?
Sometimes I may need an int, a float, and a boolean.
Other times I may need two ints and a string.
Thanks!
Solved!
Go to Solution.

Given this example you could have a table which contains a the timestamp and a record ID. Most databases can assign the key automatically and guarantee it to be unique. You may also store the machine name or other identifying information specific to this entry. However, all columns in this table would be populated in every record. You can then have another table which contains the specific data for that record. This table would have a column which contains the ID from your other table. You can have multiple entries in this table for that specific ID. This table would contain the ID from the other table, a column indicating what the specifc data is (voltage, temperature, pressure, etc.) and then the data itself. If you have different data types you can have a table for each specific data type (string, double, image, etc.). If you have separate tables for the different data types you would need a key/ID for each data value record. The data tables would simply be the ID for the data attribute and the value itself.
So, table one may consist of the following columns: Table1-Key, Timestamp, Test ID
The attributes table would have the following columns: Table1-Key, Record Type, Data-Key
Your Data Tables would have the following columns: Data-Key, Value (You could have multiple Data Tables for each data type.
To get all the data for a specific time you join the results of the queries from the tables for a specific Table1-Key and the corrsponding Data-Keys from the data tables.
If your table currently has dozens of columns but you are only storing a few at a time your are wasting a ton of space for all the empty columns. Some databases are better than others at reducing this waste but link table help you to store only the specific data for a given record and not fill the database with lots of empty records.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

[OSB10.3.1] err creating JMS stuff in OSB cluster from recorded WLS session

Hi all,
I've setup an OSB cluster with 2 managed servers.
From WLS console I created successfully the below JMS resources:
1. new file store, name and directory: MyFileStore_m01, target: bnk01osbm01 migratable
2. new file store, name and directory: MyFileStore_m02, target: bnk01osbm02 migratable
3. new jms server, name: MyJMSServer_m01, persistent store: MyFileStore_m01, target: bnk01osbm01 migratable
4. new jms server, name: MyJMSServer_m02, persistent store: MyFileStore_m02, target: bnk01osbm02 migratable
5. new jms module, name: MyJMSSystemModule, targets: cluster bnk01osbcluster + all servers in the cluster
6. new xa conn factory, name: MyXAConnectionFactory, jndi name: MyXAConnectionFactory
(targets as proposed by WLS itself: cluster bnk01osbcluster + all servers in the cluster)
+ XA Connection Factory Enabled: true
7. new Distributed Queue, name: MyDistributedQueue1, jndi name: MyDistributedQueue1, load balancing policy: round-robin
(targets as proposed by WLS itself: cluster bnk01osbcluster + all servers in the cluster)
+ allocate members uniformly: true
and I recorded that into the included recorded_by_wls.py. As said no error has been raised.
Then I removed the above JMS resources and I executed the recorded_by_wls.py from command line getting the error that I reported at the end of the email.
I changed slightly the original py produced by WLS by adding only the below first 5 lines:
print "Starting the script ..."
connect("weblogic", "weblogic", "t3://wasdv1r3n1.dev.b-source.net:7031")
edit()
startEdit()
cd('/')
I included also the recorded_by_wls.py source at the end of the email.
For information I reported also what I saw on WLS console when I created manually my JMS resources.
Do you have an idea why a successfully recorded WLS session fails when executed from a command line ?
Any help will be very appreciate.
Thanks in advance.
Regards
ferp
Error:
java weblogic.WLST recorded_by_wls.py Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Starting the script ...
Connecting to t3://wasdv1r3n1.dev.b-source.net:7031 with userid weblogic ...
Successfully connected to Admin Server 'bnk01osbadm' that belongs to domain 'bnk01osb'.
Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start an edit session via startEdit().
For more help, use help(edit)
Starting an edit session ...
Started edit session, please be sure to save and activate your changes once you are done.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released once the activation is completed.
Activation completed
Starting an edit session ...
Started edit session, please be sure to save and activate your changes once you are done.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released once the activation is completed.
This Exception occurred at Mon Sep 07 15:31:33 CEST 2009.
weblogic.application.ModuleException: ERROR: Unable to add destination MyJMSSystemModule!wlsbJMSServer_auto_2@MyDistributedQueue1 to the back end wlsbJMSServer_auto_2
at weblogic.jms.module.JMSModule.prepareUpdate(JMSModule.java:618)
at weblogic.jms.module.ModuleCoordinator.prepareUpdate(ModuleCoordinator.java:487)
at weblogic.application.internal.flow.DeploymentCallbackFlow$5.next(DeploymentCallbackFlow.java:514)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepareUpdate(DeploymentCallbackFlow.java:280)
at weblogic.application.internal.BaseDeployment$PrepareUpdateStateChange.next(BaseDeployment.java:679)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.prepareUpdate(BaseDeployment.java:444)
at weblogic.application.internal.SingleModuleDeployment.prepareUpdate(SingleModuleDeployment.java:16)
at weblogic.application.internal.DeploymentStateChecker.prepareUpdate(DeploymentStateChecker.java:221)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepareUpdate(AppContainerInvoker.java:149)
at weblogic.deploy.internal.targetserver.operations.DynamicUpdateOperation.doPrepare(DynamicUpdateOperation.java:130)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045050]A destination of name MyJMSSystemModule!wlsbJMSServer_auto_2@MyDistributedQueue1 has a jms-create-destination-identifier of name MyJMSSystemModule!wlsbJMSServer_auto_2@MyDistributedQueue1. However, another destination of name MyJMSSystemModule!wlsbJMSServer_auto_2@MyDistributedQueue1 has the same jms-create-destination-identifier. Two destinations with the same jms-create-destination-identifier cannot be co-located on the JMSServer named wlsbJMSServer_auto_2.
at weblogic.jms.backend.BackEnd.addDestination(BackEnd.java:1527)
at weblogic.jms.backend.BEDestinationRuntimeDelegate.prepare(BEDestinationRuntimeDelegate.java:195)
at weblogic.jms.backend.udd.UDDEntity.prepare(UDDEntity.java:444)
at weblogic.jms.module.JMSModule$EntityState.setState(JMSModule.java:1704)
at weblogic.jms.module.JMSModule$EntityState.setState(JMSModule.java:1667)
at weblogic.jms.module.JMSModule$EntityState.access$100(JMSModule.java:1608)
at weblogic.jms.module.JMSModule.addEntity(JMSModule.java:936)
at weblogic.jms.module.JMSModule.addEntity(JMSModule.java:841)
at weblogic.jms.module.JMSModule.access$1500(JMSModule.java:87)
at weblogic.jms.module.JMSModule$JMSModuleListener.prepareUpdate(JMSModule.java:1485)
at weblogic.descriptor.internal.DescriptorImpl$Update.prepare(DescriptorImpl.java:481)
at weblogic.descriptor.internal.DescriptorImpl.prepareUpdateDiff(DescriptorImpl.java:195)
at weblogic.descriptor.internal.DescriptorImpl.prepareUpdate(DescriptorImpl.java:174)
at weblogic.jms.module.JMSModule.prepareUpdate(JMSModule.java:614)
Problem invoking WLST - Traceback (innermost last):
File "/products/software/tmp/recorded_by_wls.py", line 92, in ?
File "<iostream>", line 364, in activate
WLSTException: Error occured while performing activate : Error while Activating changes.ERROR: Unable to add destination MyJMSSystemModule!wlsbJMSServer_auto_2@MyDistributedQueue1 to the back end wlsbJMSServer_auto_2 Use dumpStack() to view the full stacktrace
recorded_by_wls.py source
print "Starting the script ..."
connect("weblogic", "weblogic", "t3://wasdv1r3n1.dev.b-source.net:7031")
edit()
startEdit()
cd('/')
cmo.createFileStore('MyFileStore_m01')
cd('/FileStores/MyFileStore_m01')
cmo.setDirectory('MyFileStore_m01')
set('Targets',jarray.array([ObjectName('com.bea:Name=bnk01osbm01 (migratable),Type=MigratableTarget')], ObjectName))
activate()
startEdit()
cd('/')
cmo.createFileStore('MyFileStore_m02')
cd('/FileStores/MyFileStore_m02')
cmo.setDirectory('MyFileStore_m02')
set('Targets',jarray.array([ObjectName('com.bea:Name=bnk01osbm02 (migratable),Type=MigratableTarget')], ObjectName))
activate()
startEdit()
cd('/')
cmo.createJMSServer('MyJMSServer_m01')
cd('/Deployments/MyJMSServer_m01')
cmo.setPersistentStore(getMBean('/FileStores/MyFileStore_m01'))
set('Targets',jarray.array([ObjectName('com.bea:Name=bnk01osbm01 (migratable),Type=MigratableTarget')], ObjectName))
activate()
startEdit()
cd('/')
cmo.createJMSServer('MyJMSServer_m02')
cd('/Deployments/MyJMSServer_m02')
cmo.setPersistentStore(getMBean('/FileStores/MyFileStore_m02'))
set('Targets',jarray.array([ObjectName('com.bea:Name=bnk01osbm02 (migratable),Type=MigratableTarget')], ObjectName))
activate()
startEdit()
cd('/')
cmo.createJMSSystemResource('MyJMSSystemModule')
cd('/SystemResources/MyJMSSystemModule')
set('Targets',jarray.array([ObjectName('com.bea:Name=bnk01osbcluster,Type=Cluster')], ObjectName))
activate()
startEdit()
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule')
cmo.createConnectionFactory('MyXAConnectionFactory')
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule/ConnectionFactories/MyXAConnectionFactory')
cmo.setJNDIName('MyXAConnectionFactory')
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule/ConnectionFactories/MyXAConnectionFactory/SecurityParams/MyXAConnectionFactory')
cmo.setAttachJMSXUserId(false)
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule/ConnectionFactories/MyXAConnectionFactory')
cmo.setDefaultTargetingEnabled(true)
activate()
startEdit()
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule/ConnectionFactories/MyXAConnectionFactory/TransactionParams/MyXAConnectionFactory')
cmo.setTransactionTimeout(3600)
cmo.setXAConnectionFactoryEnabled(true)
activate()
startEdit()
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule')
cmo.createUniformDistributedQueue('MyDistributedQueue1')
cd('/JMSSystemResources/MyJMSSystemModule/JMSResource/MyJMSSystemModule/UniformDistributedQueues/MyDistributedQueue1')
cmo.setJNDIName('MyDistributedQueue1')
cmo.setLoadBalancingPolicy('Round-Robin')
cmo.setDefaultTargetingEnabled(true)
activate()
startEdit()
-- source end --
ON WLS console
Name Type Target
MyFileStore_m01 FileStore bnk01osbm01 (migratable)
MyFileStore_m02 FileStore bnk01osbm02 (migratable)
FileStore_auto_1 FileStore bnk01osbm01
FileStore_auto_2 FileStore bnk01osbm02
WseeFileStore_auto_1 FileStore bnk01osbm01
WseeFileStore_auto_2 FileStore bnk01osbm02
Name Persistent Store Target Current Server
MyJMSServer_m01 MyFileStore_m01 bnk01osbm01 (migratable) bnk01osbm01
MyJMSServer_m02 MyFileStore_m02 bnk01osbm02 (migratable) bnk01osbm02
wlsbJMSServer_auto_1 FileStore_auto_1 bnk01osbm01 bnk01osbm01
wlsbJMSServer_auto_2 FileStore_auto_2 bnk01osbm02 bnk01osbm02
WseeJmsServer_auto_1 Wsee FileStore_auto_1 bnk01osbm01 bnk01osbm01
WseeJmsServer_auto_2 Wsee FileStore_auto_2 bnk01osbm02 bnk01osbm02
Name Type
MyJMSSystemModule System
configwiz-jms System
jmsResources System
WseeJmsModule System
Name Type JNDI Name Subdeployment Targets
MyDistributedQueue1 Uniform Distributed Queue MyDistributedQueue1 Default Targetting bnk01osbcluster
MyXAConnectionFactory Connection Factory MyXAConnectionFactory Default Targetting bnk01osbcluster

Hi Ferp,
Do you have an idea why a successfully recorded WLS session fails when executed from a command line ?It should not fail. Each and every successfully (activation has been done without reporting an error/conflict) recorded session will execute on other servers successfully until a unique name constraint gets violated.
In your case this violation has happened. Your script is trying to create a distributed destination "MyDistributedQueue1" under module "MyJMSSystemModule", targetted to JMS Server "wlsbJMSServer_auto_2" but a Distributed Queue with same JNDI name already exists there.
Please check.
Regards,
Anuj

How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

Hi!
I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
Then I import it into OSB and make it work and the service works normally in the single node.
But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
Thank you!

Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

How to create OSB cluster

Similar Messages

Maybe you are looking for