How-To Create OVM 2.2.2 Single Pool with Non HA, Single Server

How to create OVM2.2.2 Server Pool with a Single, Non-HA configuration.
- Install OVM2.2.2 on target Server: [ovs222a, ip=192.168.0.207]
(Default install creates ocfs2 file system on /dev/sda3 on my machine, YMMV).
- Install OVMM2.2.0 or later on another server or VM
- Remove existing OCFS2 filesystem and repository from [ovs222a] server
- logon to [ovs222a] as root
# cd /opt/ovs-agent-latest/utils
# ./repos.py -l (shows uuid)
# ./repos.py -d [uuid]
- Recreate the ocfs2 file system
# mkfs.ocfs2 -N 8 -T datafiles /dev/sda3
- Create a new repository on the ocfs2 file system and make it root
# ./repos.py -n /dev/sda3
# ./repos.py -r /dev/sda3
# ./repos.py -l (should show new repository uuid with [R] designation)
- Edit cluster.conf, ensure only 1 node with ip addr: 192.168.0.207
# vi /etc/ocfs2/cluster.conf
- Edit /etc/hosts, ensure ovs222a ip addr = 192.168.0.207, not 127.0.0.1
(/etc/hosts should look like the following
127.0.0.1 localhost localhost.local.domain
192.168.0.207 ovs222a ovs222a.[your.actual.domain.name]
- Configure o2cb service, take the defaults which will start o2cb service on boot
# service o2cb configure
# service o2cb start
# service 02cb status
- Using OVMM2.2.0 GUI, create Server Pool
- Server Pool Name: [ovm2pool1]
- LEAVE SERVER POOL IP ADDRESS [BLANK], NOT NEEDED FOR SINGLE SERVER SERVER POOL
- LEAVE HIGH AVAILABILITY MODE ENABLE [UNCHECKED] (HA not available in single server cluster pool).
- Set [ovs222a], [192.168.0.207] as Server Pool: MASTER, UTILITY, VM SERVER with correct passwords.
- Test connection to [ovs222a]
- Create Pool

Hi
ThanQ For Reply Saurabh,
So Now I have to create one logon.jsp this jsp having username and password.
For Example http://sapmjd:50000/scw/logon.jsp
when i will pass the URLu2019s that time I am able to See logon Page. This .jsp is normal logon jsp looks like client logongape( logos, all available) By using this jsp how we will connect main URL i.e (irj/portal)
in logon.jsp I will pass UID and PWD that time I am logon into the Portal,
Could you tell me these Answes.
1. Is it possible to Connect main URL i.e (irj/portal) or customize par file having one jsp is there i.e jsp name umLogonPage.jsp. is it possible when I will pass the uid and pwd in logon.jsp this jsp will connect to the jsp umLogonPage.jsp.
2. If you says Answer YES How we will connect.
Regards
Vijay Kalluri

Similar Messages

How to create a new Oracle OSB project automaticaly with script without IDE

Hello,
I want to create automatically an "Oracle service bus project" and an "Oracle service bus configuration project" with scripts (ANT or Maven or ...) without using IDE, without using workshop or Eclipse. I want to create automatically (ANT or Maven) just a skeleton of an OSB project witch i can use after in workshop.
I want to create 1 "Oracle service bus configuration project" with many "Oracle service bus project" automatically (ANT or Maven or scripts) witch i can use after in workshop. How to create a new Oracle OSB project automaticaly with script without IDE ? How can i do this ?
I'm using Oracle service bus 10.3.1
Thank you for your help.

Thank you for your response,
I do not want to just create the services (proxy services and business services) but I want to create a template for 40 OSB project with the same scripts ANT/Maven.
Template="Oracle service bus configuration project" + "Oracle service bus project" + services of 40 OSB projects
The goal is that I have more than 40 projects to create and just the name of the projects that changes (when I say the name of the project ie the name of the OSB project, the name of proxy services and the name of business services ).
So I want to give my script (ANT/Maven) the name of 40 OSB project and the script must generate the skeleton of the 40 projects at once time and after generation of skeleton of the 40 project, I will import them in the workshop to add manually mapping and routing and other things that differs from one project to another.
So i want to generate automatically a skeletons of 40 OSB projects using a script (ANT / Maven) and I give to the script juste the names of the 40 projects.
I want to create a "Oracle service bus configuration project" and "Oracle service bus project" automatically of 40 OSB projects (ANT or Maven or scripts) witch i can use after in workshop.
I want to create one 'template' of all 40 projects in the same time, with the same directory structure (Transforlation, Business services, proxy services, WSDL .....) and all 40 project have the same transport, just the names of projects and services witch changes and i can give to the script all names of projects and services and i can give also all WSDL.
Regards,
Tarik

How to create users and groups using WLST Offline with Weblogic 8.1.4

How to create users and groups using WLST Offline with Weblogic 8.1.4?
Any ideas?

Hi this is how i created a user using WLST Offline?
cd('/Security/' + domainName)
# Delete the default user name weblogic
# incase you want to remove the defualt user weblogic
delete('weblogic','User')
# Creating a new user defined
create(userName, 'User')
# Setting the password of the user you created.
cd ('/Security/' + domainName + '/User/' + userName)
cmo.setPassword(password)
Regards
Makenzo

How to create a Macromedia's Flash Java Player with JMF?

How to create a Macromedia's Flash Java Player with JMF? Can you give me an example? My email:[email protected] [email protected]

Yes, there is a way. Look up JTree in the API.-can you post some code.... i cant figure out on how to use JTree...
i'm still confused on where will i get the entire directories of my drives...
thanks

How can iWeb hit counter be made to work with non-Apple server?

How can IWeb hit counter be made to work with non-Apple server?

This tutorial describes how to add an alternative counter to an iWeb page: iW05 - Adding a Graphical StatCounter as an HTML Snippet to an iWeb Page
OT

How to create a muse site in various languages with multiple domains

I have been asked to create a website for a product. A very simple website with maybe one or two pages and one product for sale for which the client would like Paypal as the payment gateway. Simple right?
No! This client would like to market their product into Europe, they would like to purchase multiple European domains ( .fr, .de for example).
So how on earth can I do this? I will be using Muse for build and Business Catalyst for hosting.
Bearing in mind the client will not want to pay for separately hosted sites. Is there a way of translating the text for each domain. Or could I assign multiple domains but direct them to different home pages within the same site?
I haven’t a clue how to problem solve this.

Hi,
Some links that might be useful,
how to set up a multilingual website with Adobe Muse and push it live to Adobe Business Catalyst
Re: How can i create different languages for my page?
How can i create a multilingual website?
how to create a multilingual site
Do let me know if you have any question.

How to Create one more SOA-INFRA under the same domain in weblogic server

Hi All,
Can anybody can guide how to create one more soa-infra under the same domain. In order to maintain my composites to be deployed into
different domains, I need to create one more soa-infra and deployed all the composites under that one.
Please let me know if any demo is available for this activity to be gets completed.
Regards,
CH

Hi Vijay,
There are several composites which needs to be deployed and maintained in the server. So, we I'm trying to maintian
by deploying composites into 3 different SOA-INFRA's so if one is not accessible, we can look into it and others can access the
composites from another SOA-INFRA instead of creating domains.
Let me know what will be feasible way to perform this activity.
Regards,
CH

How to create a workbook in BI 7.0 with more than 15 Sheets?

Hi Experts,
i would like to know how to create a workbook with more than 15 Sheets.
One Workbook should be based on one query and the other on differents queries.
How should be the authorization? If you have any documents please just send it to me.
Cheers
G

HI
Execute one report save it in the workbook, then you can goto the tools and click insert query, like that you can add how many queries you want. then right click on the reports goto properties there in the interface tab click the check button for refrsh all the queries. finally save it with the option save existing wrokbook(beacause you already save the first query in the workbook)
Regards,
chandra.

How to create a top include for module pool program

hi all..
I want to add my global declarations in one top inlcude.. There are so many other includes in my pgm. But how can i create top include explicitly. Also I have one normal report pgm attached with this module pool.

hi Cynthia ,
there are two ways of creating a top include at your situation ,
1) Insert an include <Prog name >TOP in your mpool program and cut n paste your declarations there .. check if this works ...
2)else .. create another m pool program in SE80 , while creating a pop up will ask for with TOP include ... check mark that and then proceed ..
anything of these two will work ...
Reward if helpful !!
Regards,
Ranjita

How to create an applet that shows a pdf as non-editable.

Hi friends,
Does any one know how to create an applet that shows a pdf document (should make that pdf a non-editable one) while clicking a link.Its urgent for me as I have to complete this one tomorrow itself...please help me...
I am able to view the pdf document but that cannot be make a non-editable one.
Can anyone gave me the code for that one....please I am not very much good in Java.

PDF is a proprietary format and Java doesn't support it by default. Are you using a 3rd party tool to create the PDF? If so, you need to review the developer docs to see how to make the document non-editable. Frankly, I don't see why you're using an Applet to view a PDF in the first place. What exactly are you trying to do. I'm confused.

How to create a 'Previous History' brush tool along with content aware

Truly did not know how to create a good title here.
When you use the 'Content Aware' tool and move subject 'A' to point B what happens is that A now sits on top of B which in turn means part of the image within B may be missing and you may still want it there where it was and where it should be. You could use the 'history brush' tool to brush away part of the new insert and erase what is there to reveveal what was there. How do you do the same thing to image A which now sits on B (to reveal what was there on A originally). What I mean is this. I moved a person from point A to point B. but parts of this person are missing (his ear, his knee, his shoe) so how do I get those parts back (in the new location)?
The history brush tool appears to be erasing by subtracting, what I would like to do in this case of course is not subtract but add or 're-add'.
Thank you

Hello,
here's a possible solution, before using content aware, take a snapshot of A and B, then use it as your history brush source whenever you need to 're-add':
please post back if you have any questions

How to create the BC4J Package in JDev 10g (with OAF)?

Hi everbody.
in JDeveloper 10.1.3.1.0
How to create the BC4J Package for Client Object or Server Object?
In JDeveloper 9i Ext,
1. select the Project in Navigator
2. right-click and select "New Business Components Package... " from the context menu
3. "Business Component Package Wizard" page appears.
In JDeveloper 10, I cannot find "New Business Components Package..." from the context menu on the Project.

Do you have the OA extension installed ?
If not then please follow the thread Oracle JDev 10g with OAExt for Release 12 now on Metalink
for more information in this regard.
--Saroj

How to create a protected circuit across thirdparty SDH with ONS15454E

Hi gyus,
I have a setup with a dark fiber (STM-16) and a couple of STM-1s via a thirdpart SDH networ between two ONS15454E.
I know how to create a SNCP protected STM-1 circuit across the STM-16 and a STM-1 if they are directly connected, but what if one of the paths between the two SDH nodes are running via a thirdparty network and SDH overhead bytes are not transmitted via this circuit, hence I can't create a normal DCC connection across this STM-1?
Hope someone can direct me in a usefull direction.

I am not certain but I believe you need to create an Open-ended SNCP Circuit. The term "Open-ended" refers to the fact that one path of the SNCP's is not reachable via DCC connection.
You might review the following procedure:
NTP-D358 Create an Automatically Routed Open-Ended SNCP High-Order Circuit
<http://www.cisco.com/en/US/docs/optical/15000r8_5/15454/sdh/procedure/guide/e85pcci.html#wp689686>
I hope this helps.

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to create recovery disk of OS X lion with Xcode 4

Dear All,
Can anyone tell me please how to create recovery disk for osx lion in case my OS crash . I want to create recovery disk please help me .
Regards
alfan

Dear ,
i am facing problem to upgrade my macbook pro 15 inch 10.6.3 to os x lion 10. 7 with recovery drive.
actually i m trying to install os x lion with the following method but could not install. i use 2 methods to install os please help me where im doing mistake.
1st method.
i make a recovery drive with recovery disk assistant on macbook air 13 inch which is shipped with lion 10.7 . and i connect my recovery drive with macbook pro 15 inch on which OS is snow leopard 10.6.3, for upgrade/install OS X lion on my macbook pro 15 inch by recovery drive.
when i hold down option key i can see my recovery drive . i can boot through my recovery drive but when i try to install os x lion the computer says
"you cant upgrade this version of mac os x "
2nd method
i made recovery drive on macbook pro 13 inch which is upgraded snow leopard to lion and then i try to upgrade my macbook pro 15 inch then the same problem i am facing
"you cant upgrade this version of mac os x "
Please help me
Regards
alfan

How-To Create OVM 2.2.2 Single Pool with Non HA, Single Server

Similar Messages

Maybe you are looking for