How to create process task adaptor for Manager DN for OID?

Thanks in advance,
We are trying to get provision users in OID and need to populate manager DN. We created pre-populated Rule generator adaptor to create user in OID. We used utility task and concat cn=managerid and ",, cn=users,dc=mycompany,dc=com." it work great at the time of user creation. Now we are trying to build "process task" adaptor in same way but it is failing and complaining about users not exist.
I used same way to build process task adaptor as I did for prepoulate rule generator only difference it selected "Process task" at the time of creation. I am new to OIM and trying to get some details. Please let me know if I am missing something.
If you already build process task adaptor to create users in OID with single location, I will appreciate that if you share with me.
Example cn=user1, cn=users,dc=mycompany,dc=com.
Thanks,
-Ishaq

Hi
You have changed the manager DN in Trusted Resource and you are able to update this information in OIM also. Now you want to update this manager DN in OID.
If this your requirement then following link may help you
OIM password
Or in this task you can write your java code to update the process form attached with the provisioning process of user.
It should work.

Similar Messages

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

How to create process variant in process chain

What is a process variant? i try to add Infocube compression to the fi process chain. To accomplish this task, i have to create process variant. please tell me the step by step process how to create process variant and successfully add the compression to the process chain. Can i do it directly in production? Thanks to SDN community that i can count on.

Hi Rafi,
<b>Process variants</b>
The process variant is the name of the process Within the process chain context, it displays the configuration of a process of a particular type set at the time of definition. A variant is only consistently defined together with the process type. A process can have various variants. With the load process for example, the name of the InfoPackage is the name of the process variant.
The user defines the process variant at the time when the process is scheduled. With some process types, the variants are determined internally and are stored as GUIDs.
For more info:
Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Processes
http://help.sap.com/saphelp_nw04/helpdata/en/7b/d4313b38bea774e10000000a114084/content.htm
Including InfoCubes in Process Chains
http://help.sap.com/saphelp_nw04/helpdata/en/d5/e80d3dbd82f72ce10000000a114084/content.htm
You can create process chains directly in Production. Most of the times system allows(depends on system settings). But this is not a proper way of working. Create in Development and transport it to Production.
Hope it Helps
Srini

How to get Process Task Retry Count using API (OIM 10g)

Hi ,
I want to get all the process task which are failed after retried 5 times.
For e.g Create user task in AD retried for 5 times but still it is in failed state. I want to get all such process task.
I am stuck at point how to get process task retry count from process definition?
Thanks

You can reference the code in the "Task Timed Retry" scheduled task to get what you are looking for. Here is the decompiled code:
>
package com.thortech.xl.schedule.tasks;
import Thor.API.Operations.tcScheduleTaskOperationsIntf;
import com.thortech.util.logging.Logger;
import com.thortech.xl.dataaccess.tcDataSetException;
import com.thortech.xl.dataobj.tcDataSet;
import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
import com.thortech.xl.util.logging.LoggerMessages;
import java.sql.Date;
import java.util.Hashtable;
public class tcTskTimedRetry extends SchedulerBaseTask
private static Logger logger = Logger.getLogger("Xellerate.Scheduler.Task");
Date isCurrentDate;
public void init()
logger.debug(LoggerMessages.getMessage("EnteredMethodDebug", "tcTskTimedRetry/init"));
this.isCurrentDate = new Date(System.currentTimeMillis());
logger.debug(LoggerMessages.getMessage("LeftMethodDebug", "tcTskTimedRetry/init"));
public void execute()
logger.debug(LoggerMessages.getMessage("EnteredMethodDebug", "tcTskTimedRetry/execute"));
tcDataSet localtcDataSet1 = new tcDataSet();
tcDataSet localtcDataSet2 = new tcDataSet();
tcDataSet localtcDataSet3 = new tcDataSet();
try
if (isStopped())
return;
localtcDataSet2.setQuery(getDataBase(), "select osi_retry_on from osi where 1=2");
localtcDataSet2.executeQuery();
if (isStopped())
return;
localtcDataSet2.setDate("osi_retry_on", this.isCurrentDate);
localtcDataSet1.setQuery(getDataBase(), "select osi.sch_key, osi.mil_key, osi.orc_key, osi.osi_rowver, sch.sch_rowver, osi.osi_retry_for, osi.osi_retry_on, osi.osi_retry_counter, sch.sch_note from osi osi,sch sch where osi.osi_retry_on <=" + localtcDataSet2.getSqlText("osi_retry_on") + " and osi.sch_key = sch.sch_key" + " and sch.sch_status='R'" + " and osi_retry_counter>0 order by osi.sch_key");
localtcDataSet1.executeQuery();
if (isStopped())
return;
int i = localtcDataSet1.getRowCount();
logger.debug("tcTskTimedRetry:execute:Number of Process tasks retrieved is=" + i);
tcScheduleTaskOperationsIntf localtcScheduleTaskOperationsIntf = (tcScheduleTaskOperationsIntf)getUtility("Thor.API.Operations.tcScheduleTaskOperationsIntf");
tcDataSet localtcDataSet4 = new tcDataSet();
localtcDataSet4.setQuery(getDataBase(), "select osi_retry_for, osi_retry_counter from osi where 1=2");
localtcDataSet4.executeQuery();
Hashtable localHashtable = new Hashtable();
if (isStopped())
return;
for (int j = 0; j < i; j++)
if (isStopped())
return;
localtcDataSet1.goToRow(j);
localtcDataSet3.setQuery(getDataBase(), "select count(*) as counter from osi osi,sch sch where osi.sch_key = sch.sch_key and osi_retry_for=" + localtcDataSet1.getLong("sch_key"));
localtcDataSet3.executeQuery();
if (isStopped())
return;
if (localtcDataSet3.getInt("counter") > 0)
continue;
localHashtable.put("osi_retry_for", String.valueOf(localtcDataSet1.getLong("sch_key")));
localHashtable.put("sch_note", localtcDataSet1.getString("sch_note"));
long l = localtcDataSet1.getLong("osi_retry_counter");
if (isStopped())
return;
try
localtcScheduleTaskOperationsIntf.createScheduleItem(localtcDataSet1.getString("orc_key"), localtcDataSet1.getString("mil_key"), localHashtable, l - 1L);
catch (Exception localException2)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localException2.getMessage()), localException2);
catch (tcDataSetException localtcDataSetException)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localtcDataSetException.getMessage()), localtcDataSetException);
logger.debug("PJ:tcTskTimedRetry:execute:DataSetexception has occured");
catch (Exception localException1)
logger.error(LoggerMessages.getMessage("ErrorMethodDebug", "tcTskTimedRetry/execute", localException1.getMessage()), localException1);
logger.debug(LoggerMessages.getMessage("LeftMethodDebug", "tcTskTimedRetry/execute"));
public boolean stop()
logger.debug("tcTskTimedRetry:stop:Task being stopped");
return true;
>
-Kevin

How to create a single SCN [Inbound Deliery] ' VL31n '   for multiple PO's

How to create a single SCN [Inbound Deliery] ' VL31n '   for multiple Purchase-Orders with the help of BAPI or BDC Recording in 4.6 b version.
Manually its possible.. but how is it possible in the background i.e through BDC Recording or BAPI's.
[ As we donot have an option of creating one same SCN [Inbound Deliery] for multiple Purchase-Orders in 'VL31n' ].
Please provide the needful Information.

These mpeg2 clips do not have audio.
I simply want to create a script that can read in the files, append to each other and then export to an .mov format.
I want the process to be called from a command line that will open QT, run the script, read in the files, append and export.
Thanks.
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows
G5 and Mac Pro Mac OS X (10.4.8) PC's and Windows

How to create a backend administrator content management system?

How to create a backend administrator content management system using SQLyog515 and JSP only.
Can give suggestions?
Thanks,
JSPnewbie*
Message was edited by:
Liting_JSPnewbie

Have a look at Perch
Perch - The really little content management system (CMS) - Perch
It requires a php/mysql database to run but the tables and set up are all automated through the Perch set up files - you just need a server that runs php/mysql. It works on the same principals as the one Ben suggested but its a lot cheaper for a one off site - however if you intend to build more CMS driven sites the one Ben suggested might be more financially viable in the long run.
The nice thing about Perch CMS is it fits in with your workflow unlike Wordpress/Joomla where you have to jump through hoops to change anything.
Plus I think you can take Perch for a spin before buying (or at least you could when I was exploring CMSs) - you can't with Power CMS. I never investigated Power CMS beacuse I would not buy something before trying it. It looks good but it might be a bit dated as it doesnt seem to be in continuous develoment. Perch is in a constant state of development and the guys are working to make it better on a daily basis.

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

How to create process chain ?

hi all,
will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
rewrd point for sure,

This may help:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
Regards,
Jordi

How to create Process chains alert

hi
Can any body guide me how to create process chan alerts

right click on required process... click on create message.... provide message....click on maintain list.. provide recepienhts list.
you can provide this for success or failed respectively.
Nagesh Ganisetti.

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

How to create ''from to '' parameter in XL reporter for templates

Hi,
How to create ''from to '' parameter in XL reporter for templates
Can anyone help me in this regard
thanks,
Suresh Kannan

Suresh,
1. Goto Report Designer
2. there u can find "Advanced Report Builder" on left side of the window
3. At the below u can find three buttons like "Parameters", "Properties","Apply"
4. Click on "Parameters"
5. then Parameters window will populate
6. Click the new Button
7. Name: give as u like
Category: Literal
Type: Date
Attribute: Leave blank
Default Vale: Leave Blank
Prompt: From Date
This is the process to create the parameters.

How to creat Process messages automatically through PI sheet saved?

How to creat Process messages automatically through PI sheet to the Process message destinations.

Hi Jessie,
When you process instruction category PROD_3 in master recipe, the process message PI_PROD is created.
After releasing process order, you have to create control recipe. Upon successful creation of control recipe, process instructions will get generated. Check the error log for control recipe creation for error if any.
Note that control recipe will be generated only with order status "Released".
You have to sent this control recipe to process control (CO53).
Hope it is helpful.
Regards,
Sachin

How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?

1. How to create an explain plan with rowsource statistics for a complex query that include multiple table joins ?
When multiple tables are involved , and the actual number of rows returned is more than what the explain plan tells. How can I find out what change is needed in the stat plan ?
2. Does rowsource statistics gives some kind of understanding of Extended stats ?

You can get Row Source Statistics only *after* the SQL has been executed. An Explain Plan midway cannot give you row source statistics.
To get row source statistics either set STATISTICS_LEVEL='ALL' in the session that executes theSQL OR use the Hint "gather_plan_statistics" in the SQL being executed.
Then use dbms_xplan.display_cursor
Hemant K Chitale

How to create Process chain in BI 7.0

hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.

check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain

How to create Ad-hoc Action in GP and for WD to process the task

Hi all,
I have created another Action in the same block with the Action check as "Optional".
However, it is not enable for selection.
How to create an Ad-hoc Action which will invoke another Web Dyrpro (which tag as the callable object of that ad-hoc action) to process ?
(using CE7.1)
Thank you.

I have tried this: http://help.sap.com/saphelp_nw70/helpdata/en/a7/435242e55cc553e10000000a1550b0/content.htm
It cannot work.
can help?
thank you.

How to create process task adaptor for Manager DN for OID?

Similar Messages

Maybe you are looking for