How to create production version & Explain with procedure

how to create production version & Explain with procedure
Madan

Hi Madan,
Production Versions are used to describe the production process to be used for planned / production order.
Why is it required?
Suppose you have 2/3 production lines and 2/3 alternative BOMs to produce one Finished Goods.
How system will come to know which BOM and Routing to be used. This is done thru Prod.Version.
In production version we maintain the combination of BOM and routing.
Also it can be designed with lot size or validity period.
Go to MM02--->MRP4 / Work scheduling view -
> Prod.Version.
Enter the validity period and lot size. and the production version should be unlocked.
After entering the reqd. routing no. and BOM alternative , carry a check.
After getting the Green signals ,Continue.
Thus you have saved the prod. version.
Mass processing TCode- C223.
Hope it would clarify you the basic of production version.

Similar Messages

How to create production version for multiple BOM & Routing ?

If I have 3 BOMs ( A, B & C ) and 2 Routing ( 1 & 2 ) for material XYZ then how then production version will be created ? I feel that there will be 6 PVs.
combination of A1, A2, B1, B2, C1 & C2. but some one told me that I have to create duplicate routing of 1 & 2
with number 3 & 4 and use it for bom B, and another duplicate Routing with number 5&6 and use it for BOM C.
in this case my PV data will be like this A1, A2, B3, B4, C5, C6.
Please guide me which way is correct. I feel that the first way is right, because in that case I have 2 routing in system, and in second way I have total 6 routings for that product. please guide me.

Hi Archana
If you are doing component allocation with routing ,
routing for material 1 counter 1 you are choosing alternate Bom 1 or 2 for material.
similarly for Material 1 counter 2 you are choosing alternate Bom 1 0r 2 according to your choice
like this 3 routing groups will get created with each have 2 counters
if you allocate similar kind of material in one group in material allocation tab & you are going for component allocation it will assign one material bom.
second material bom will not get assigned to the operation.
if you are not going assign the component at the routing level than you can follow first process.
if you are planning to allocate components at routing level than you have to follow second process.
If have any more doubt kindly revert back with your query.
Thanks & Regards
Sandeep Kumar Praharaj

How to create an unsolved cube with awm???

hi all,
I readed the "Oracle Olap developer's guide to the Oalp api" and I found there's 2 type of Cube: Solved and Unsolved Cubes. And this document says: "... if all the data for a cube is specified by the DBA, then the cube is considered to be Solved. If some or all of the aggregate data must be calculated by Oracle OLap, then the cube is unsolved ..."
I tried with awm 10.2.0.3.0A to create an unsolvedCube but I can't. All cubes I created are solvedCube. To know if a cube is solved or unsolved, I wrotte an program in Java to read informations of package mtm.
Some one can tell me how to create an unsolved cube with AWM ou other soft please!

SH is not a relational OLAP data model which is quite different from the GLOBAL schema which is based on an Analytic Workspace.
If you change the aggregation method you will need to re-compute the whole cube which can be a very big job! You might be able to force the unsolved status be de-selecting all the levels on the Rules tab in AWM. However, I think by default analytic workspace OLAP models always provide a fully solved cube to the outside world. This is the nature of the multi-dimensional model.
Relationally, as keys are located in separate columns a cube can be unsolved in that the key column only contains values for a single level from the corresponding dimension tables. If more than keys for different levels within the same dimension appear within the fact key column then the cube is deemed as being solved.
Therefore, I am not sure you are going to get the information you require from the API. To changes the aggregation method you will have to switch off all pre-compute options and also disable the session cache to prevent previously calculated data being returned when you change the aggregation method.
Hope this helps
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

How to create Web Service Proxy with help of WSDL.

Hi ,
How to create Web Service Proxy with help of WSDL .
Please help me .
Thanks in advacne for reply .

check out this article. It has all the details
http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html

How to create a material master with referrence to exsisting material maste

hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jai

Dear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh

Product version inconsistent with software components

Hi,
after upgrading our sandbox from 4.6C to ERP 6.0 EHP4 SP06 i've changed the product assignment in SMSY and fetched the new data using "Read System Data Remote". Now there are two problems:
1.) Read System Data Remote shows error message S:032:000 trying to fetch data using RFC. No more explanations or long text. Although data is been read and updated and RFC test connection is ok.
2.) The related system shows exclamation mark "Product version inconsistent with software components". The product version is SAP ERP 6.0, Product Instance is SAP ECC Server. Now i tried "Change Product Assignment" and "Clean-Up Inconsistencies". This results in a list of "Inconsistent Database Assignments" like "Product: SAP ERP" and "Product Instance: SAP SRM-Server". Nothing i can change here. I'm confused as i haven't defined SAP SRM-Server anywhere just SAP ECC-Server.
Any ideas about 1.) or 2.)
It seems to me that Solution Manager doesn't make life easier in the first.
Thanks.

Miguel,
i have checked note 1165438 but can't see how this should help. The technical usage is correct and there is only one specified which is ECC / Central Applications. Still SMSY complains about SAP SRM-Server and more.
Let me say that the system was defined as 4.6C before the upgrade and that we used Solution Manager to download all required packages for ERP 6.0 EHP4 SP06 which worked fine. The problem is as said before that after changing the product version to ERP 6.0 there are inconsistencies shown on the product assignment page (inconsistent database assignment) for SAP SRM-Server, SRM-Catalog, cProject Suite, Workforce Management, E-Recruiting, NW-Business Intelligence, NW-Process Integration, SEM, SRM-Server ECC AddOn, SRM Catalog Content, NW Mobile Infrastructure, FSCM-FSCM Server (ABAP), Application Platform-IPC and Learning Sol-Frontend ABAP. Never heard about them nor specified them anywhere.

How to maintain production version for material and how it will work

Dear Friends,
                      i have created alternative bom for a material , My FG is having two RM1 and RM2. like below,
                FG --->RM1
                FG---->RM2
i created alternative BOM. how it will fetch raw materils from BOM while doing production confimation. what is meant by production version and how to configure that. how it will work
regards
RK

Dear Raja karthik,
1.Production version is a combination of BOM & Routing in Discrete scenario & in REM scenario its a
combination of BOM & Rate routing/Routing.The same can also be created only containing the BOM incase if it is going to be
used for a sub-contracting purchase info record.
2.Production version is a method or technique which's is used to produce a material.
3.A Material may be having one or more than one production version.
4.Production version can be differentiated by using either the validity date or Lot size range.
5.Say For Eg: Prod.Version1 --> Alt BOM1 & Routing1
Prod.Version2---> Alt BOM2 & Routing 1.
6.It has the status Locked and unlock.We can lock it when it is to blocked for any usage purpose.
6.Generally its created using T code MM02,by selecting MRP4 view and clicking on Production version key.
7.It's a master data in REM scenario.
8.Production versions can also be created using T code C223 for more than one material.
9.Planned independent requirements can be created production version specific in MD61.
Regards
Mangalraj.S

HOW TO CREATE PRODUCTION SCHEDULING PROFILE

PLEASE
TELL ME HOW TO CREATE PRODUCTION SCHEDULING PROFILE
EXPLAIN IN STEPS
THANKS

Hi,
Check the below link and the screen shot:
http://wiki.sdn.sap.com/wiki/display/ERPLO/Production+Order+Type+Selection
Hope it will help you.
Regards,
Alok Tiwari

How To Create Drop Down Menu With Tab

hi
How To create Drop Down Menu with tab in Header of application like website Horizontal Dropdown Menu In html.
Thanks
Manoj
Edited by: Manoj Kaushik on Dec 30, 2009 4:16 AM

Try the Apex forum {forum:id=137} someone there may have an answer.
Which version, that could be important, XE out-of-the-box has apex 2.1 if it hasn't been upgraded to 3.x

How to create a Sales order with ref to Contract using Function Module

How to create a Sales order with ref to Contract using Function Module BAPI_SALESDOCU_CREATEFROMDATA ?

We have a unique situation where we like change the sold-to customer of the sales order
once order has been created. These orders have been created using either by function module
BAPI_SALESDOCUMENT_COPY or using BDC (VA01, Copy with reference).
These two processes work abosolutely fine except someone might have change the sold-to
customer of the ship-to customer of the original sales order. If this the case then the new
sales order will be created with the old sold-to and with not the new sold-to.
We tried using BAPI_SALESDOCUMENT_CHANGE and commit afterwards. We checked
the returned parameteres of the BAPIs and they are all successful but sold-to remains the
same old one.
Any help would be much more appreciated.

How to create a pdf file with CS5

Hello, I'm new to PhotoShop CS5 and haven't figured out yet (despite two hours of trying) how to create a pdf file with pictures and texts. Can someone please help me with this ? The "help" button in CS5 doesn't seem to cover this question. Nor do the FAQs.
Thank you very much.

Save As... Photoshop PDF.

How to create a test plan with specific transactions (or program)

Hello,
I'm a new user in Sol Man !
How to create a test plan with specific transactions (or program).
In my Business Blueprint (SOLAR01) I've created in 'transaction tab' the name of my specific transactions and linked it.
In my test plan (STWB_2) those specific doesn't appear to be selected !
Thanks in advance.
Georges HUYNEN

Hi
In solar01 you have defined but you have to assign the test case in solar02 for this test case in the test cases tab.
When you do so expand the business sceanario node in test plan generation of STWB_2 transaction and now that will appear.
Also visit my weblog
/people/community.user/blog/2006/12/07/organize-and-perform-testing-using-solution-manager
please reward points.

How to create a web template with company logo

how to create a web template with company logo . can any one help me with the steps. or any notes. thnaks in advance .
2. i have 25000 articles and client want to have a selection feild to see top article ex:50,10,20, 100, 1000 etc . same for bottom articles . plz let me know how to do it . thanks for replay . i am new bw so plz .
thanks to you all

Hi
1) Please read
http://help.sap.com/saphelp_nw04/helpdata/en/4a/c8353c51aab32be10000000a114084/frameset.htm
2) Create a condition in the Query Designer: Use a formula variable
See http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm
Heike

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

How to create a csv file with NCS attributes?

Hi
i installed Cisco Prime NCS and trying to perform bulk update of device credentials with csv file.
How to create a csv file with all required attributes?
This is part of NCS online help talking about this topic:
Bulk Update Devices—To update the device credentials in a bulk, select Bulk Update Devices from the Select a command drop-down list. The Bulk Update Devices page appears.You can choose a CSV file.
Note The CSV file contains a list of devices to be updated, one device per line. Each line is a comma separated list of device attributes. The first line describes the attributes included. The IP address attribute is mandatory.
Bellow is test csv file i created but does not work:
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
The error i am getting while importing this file:
Missing mandatory field [ip_address] on header line:10.64.160.31,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
Assistance appreciated.

It looks like the IP address field is incorrectly set.,
It should be as follows
{Device IP},{Device Subnet Mask}, etc etc
so a practical example of the aboove could be (i dont know if this is completely correct after the IP address / Subnet Mask)
10.64.160.31,255.255.255.0,v2c,2,10,snmpcomm,ssh,zeus,password,password,enablepwd,enablepwd,60
below is a link to the documentation
http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/ctrlcfg.html#wp1840245
HTH
Darren

How to create production version & Explain with procedure

Similar Messages

Maybe you are looking for