How to create radio button in reports

Hi Friends,
Can any body please tell how to create radio button in reports.
Thanks,
Nagendra

Hi Nagendra,
    But why do u need a single radio button, any specific reason...
try this
REPORT ZCHA1.
PARAMETERS : P_RAD1 RADIOBUTTON GROUP RAD,
             P_RAD2 RADIOBUTTON GROUP RAD.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-NAME = 'P_RAD2'.
      SCREEN-INVISIBLE = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.

Similar Messages

How to create radio button between two slection screen

hello all.
could you please guide me how to create radio button between two SELECTION-SCREEN in screen painter.
Thank you,
srinivas

hi
SEE THIS CODE
REPORT ZNNR_REPORT NO STANDARD PAGE HEADING MESSAGE-ID ZNNR LINE-SIZE 100 LINE-COUNT 65(4).
******DATA DECLARATIONS**********
DATA : BEGIN OF IT_PLANT OCCURS 0,
        MATNR LIKE MARA-MATNR,
        WERKS LIKE MARC-WERKS,
        PSTAT LIKE MARC-PSTAT,
        EKGRP LIKE MARC-EKGRP,
       END OF IT_PLANT.
DATA : BEGIN OF IT_PONO OCCURS 0,
        EBELN LIKE EKKO-EBELN,
        EBELP LIKE EKPO-EBELP,
        MATNR LIKE EKPO-MATNR,
        WERKS LIKE EKPO-WERKS,
        LGORT LIKE EKPO-LGORT,
       END OF IT_PONO.
TABLES EKKO.
********END OF DATA DECLARATIONS*********
********SELECTION SCREEN DESIGN ***********
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_WERKS LIKE MARC-WERKS MODIF ID S1.
SELECT-OPTIONS : S_EBELN FOR EKKO-EBELN NO INTERVALS MODIF ID S2.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R3 RADIOBUTTON GROUP G2 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R3.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R4 RADIOBUTTON GROUP G2.
SELECTION-SCREEN COMMENT 5(20) TEXT-004 FOR FIELD R4.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 5(20) TEXT-002 FOR FIELD R1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS : R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN COMMENT 5(20) TEXT-003 FOR FIELD R2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B2.
******END OF SELECTION SCREEN DESIGN****************
<b>rEWARD IF USEFULL</b>

How to create radio button in module pool

Hi All,
Please tell me step by step procedure for creating radio button in module pool.give code for two radiobutton and at a time only one should be selected.
Thanks
Narendra

Hi naren,
In the layout of screen painter click on radiobutton option in the left icons and create in the layout and give name as Radio1 and again select the radiobutton icon and create another and give the name as radio2 and by dragging the cursor select the 2 radiobuttons and goto menubar->edit->grouping->radiobuttons grouping->define.
Double clcik on the 2 radiobuttons and give FCT code for the coding purpose of the 2 radiobuttons.
Cheers!!
VEnk@

Creating radio buttons in XML Forms Builder

Hi everyone,
I can't seem to find any instructions on how to create Radio Buttons in XML Forms builder, anyone has a link or instruction on how to?
Thanks,
Samer

Hi Samer,
So taking the example for the slides, you need first to create a new child under DataModel for the DataSchema. You can name it "Gender".
Click on the Radio Button in the Toolbar and drag "Gender" from the left hand site into the Edit Form.
It should have already a first radio button and in the box on the bottum right you should see the reference in the Schema Reference field (/DataShema/DataModel/Gender).
You can now drag a second button from the toolbar and place it behind the first one. Make sure you add the same value in the Schema Reference field.
On the Show form or RenderListItem you need a Control Selector as mentioned on slide 18. You can just use right mouse click -> Add. Go on the new item on the right hand side, and click on "Add Multiple Labels". You can choose now how many radio buttons you have, here 2.
In our example enter in one Label "Condition" = "true" and "Label" = "Male" and in the other "Condition" = "false" and "Label" = "Female".
Finally, make sure that the Control Selector has the Schema Reference also as defined above (/DataShema/DataModel/Gender).
Hope this helps,
Robert

How to define RADIO BUTTONS in MODULE POOL PROG.?

Hi Experts,
I need to keep the RADIO BUTTONS in 1000_screen of my_module_pool prog., like,
I hv 2 fields in this screen, as expected, the first shuld hv DEFAULT selection.
So, I just simply, dragged & dropped 2 radio buttons from left menu of the screen builder & given them the names as
R_SUMMARY
R_DETAIL
Then i executed the transaction, but, these above 2 fields are getting selected, as default??
I know that, if its a REPORT prog. we can define as w/ a GROUP, then the 1st one is hv the default selection.
so,
1 - How to define RADIO BUTTONS in this screen of a module pool prog.
2 - How to use these names in the prog.(PAI - i guess)?
thanq
Edited by: Srinivas on Jul 12, 2008 11:59 PM

Hi Srinivas,
Please check this link
Re: urgent:Regd radio buttons in module pool
http://saplab.blogspot.com/2007/10/sample-abap-program-for-module-pool_18.html
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Best regards,
raam

What is the diffrence between "Key to Select" and "Selected Key" while creating Radio Buttons?

While creating radio buttons there is a confusion regarding two properties "Key to Select" and "Selected Key".Can anybody explain it with example?
Thanks,
Vimal

Hi Vimal,
Please find my explanation as below
Key to Select: This is the unique key for each radio button to identify which one is selected
Selected Key: This holds the "KEY" of selected radio button
Example:
   Let us say we have 2 radio buttons : Male & Female
     Create a context attribute SELECTED_KEY of type STRING.
     Create an action ON_SELECT for radio button select event
     Now,
     the properties for "MALE" radio button as below
          KEY_TO_SELECT = 'M'
          SELECTED_KEY = "bind to the context attribute SELECTED_KEY
          OnSelect = 'ON_SELECT'.
     The properties for 'Female" radio button as below
          KEY_TO_SELECT = 'F'
          SELECTED_KEY = "bind to the context attribute SELECTED_KEY
          OnSelect = 'ON_SELECT'.
If we select radio button 'Male', we get the key as 'M' and for 'Female' radio button 'F'.
check inside the event handler method ONACTIONON_SELECT, you get the 'KEY' of selected radio button.
So, the context attribute 'SELECTED_KEY' gets filled with the key of selected radio button
Hope this helps you in distinguishing the 'KEY TO SELECT' & 'SELECTED KEY' .
Regards,
Rama

How to create SAVE button in Workbook using BI IP Functionality

Hi All,
I have Real-time Infocube (ZCUBSDID) with me. Planning has been done on the cube using BI-IP (like Aggregation level, filter, planning function and planning sequence are present there).
As an Input i have everything in Quality system like I can access query in Bex Anlyzer (Input Ready Query) and also i have workbook associated with the query. SAVE button is also present on workbook which is giving result based on fiscal year and version.
Now my task is to create workbook on Development system with the same functionality as Quality System.
I have same Query available on DEV system also. I created new Workbook but SAVE button is not available in my workbook.
Can anyone suggest how to create SAVE button in my new workbook.
I am new in IP side so please let me know if i can get any help from workbook which is already present in Quality system.
Which type of analysis i should do to come out with solution.....otherwise let me know step by step procedure to create SAVE button on workbook using BI-IP functionality.
It will be great help. My advance thanks goes to you people.
Thanks,
Rupali Singh

Check points 19 & 20 on this link http://help.sap.com/saphelp_nw2004s/helpdata/en/43/a033e0f56e21b5e10000000a1553f6/frameset.htm.
Command to be called on SAVE button is SAVE_AREA as explained in the point 20.
Regards,
Deepti

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

Create Radio button dynamically in Table column.

HI All
   I have used following code to create radio button dynamically. but it's getting dump saying that Could not find attribute STATUS.
Here STATUS is the attribute of the node in View context. But why this dump is coming.
Please correct me if any thing worng.
DATA: lr_radio TYPE REF TO cl_wd_radiobutton.
DATA: lr_containr TYPE REF TO cl_wd_transparent_container.
DATA: lr_data TYPE REF TO cl_wd_flow_data.
IF first_time = abap_true.
    lr_containr ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
    lr_radio = cl_wd_radiobutton=>new_radiobutton(
    view = view
    id = 'RADIO'
    text = 'Enroll'
    bind_selected_key = 'STATUS'
    key_to_select = 'STATUS' ).
    lr_data = cl_wd_flow_data=>new_flow_data( element = lr_radio ).
    lr_radio->set_layout_data( lr_data ).
    lr_containr->add_child( lr_radio ).
ENDIF.
Thank you very much
Ram

Hi Rama,
I solved it.check this code.
i think u did mistake in creating radio button you are not passing the
BIND_KEY_TO_SELECT
instead you are passing KEY_TO_SELECT.
data:lr_column2 type ref to cl_wd_table_column,
     lr_radio type ref to cl_wd_radiobutton.
   lr_column2 = obj_table->get_column(
               id         = 'TABLE1_PLANETYPE'
*              INDEX      = INDEX
lr_radio = cl_wd_radiobutton=>new_radiobutton(
*      BIND_ENABLED        = BIND_ENABLED
       BIND_KEY_TO_SELECT = 'STATUS'
*      BIND_KEY_VISIBLE    = BIND_KEY_VISIBLE
*      BIND_READ_ONLY      = BIND_READ_ONLY
       bind_selected_key   = 'STATUS'
*      BIND_STATE          = BIND_STATE
*      BIND_TEXT           = BIND_TEXT
*      BIND_TEXT_DIRECTION = BIND_TEXT_DIRECTION
*      BIND_TOOLTIP        = BIND_TOOLTIP
*      BIND_VISIBLE        = BIND_VISIBLE
*      ENABLED             = ABAP_TRUE
*      EXPLANATION         = EXPLANATION
       ID                  = 'RAD1'
*      KEY_TO_SELECT       = KEY_TO_SELECT
*      KEY_VISIBLE         = KEY_VISIBLE
*      ON_SELECT           = ON_SELECT
*      READ_ONLY           = READ_ONLY
*      STATE               = E_STATE-NORMAL
       TEXT                = 'Test'
*      TEXT_DIRECTION      = E_TEXT_DIRECTION-INHERIT
*      TOOLTIP             = TOOLTIP
*      VIEW                = VIEW
*      VISIBLE             = E_VISIBLE-VISIBLE
lr_column2->set_table_cell_editor( the_table_cell_editor = lr_radio ).
Thanks,
Suman

How to create user editable Crystal Report with dynamic dataset

What I would like to achieve:
A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
What I do:
CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
CrReport.Load(TemplateFilename)
Dim Results As DataTable
DataTable is filled from a database
CrReport.SetDataSource(mResults)
CrReport.SaveAs(NewReportPath, True)
The NewReportPath is opened in the default program.
What are the problems
The report is open in preview mode (not in design).
When the field is added to the report the designer asks for XML datasource on preview.

The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

ADDING RADIO BUTTONS IN REPORT NEAR MISS (EHSM-NWBC)

Hi Experts,
I am new to this EHSM Enhancements , I have a requirement to add 3 radio buttons in Report Near Miss ( EHSM-NWBC ), I am not understanding this BOPF firm Enhancement .So please provided me the required information .
Thanks & Regards.
Bhushan K.

Hi Bhushan,
If you want to add 3 radio buttons, then first of all you have to append one field in EHHSSS_INC_BASIC_INFO_ALL_D structure with Fixed Domain values.
Then you need to enhance EHHSS_INC_REC_NRM_QAF_V3_BSCI component Configuration.
In that Configuration you need to add field with display type Radio Button Group, with column count 3.
Kindly refer the following snap for the same.
Thanks and regards,
Chetan P. Patil

How to create a button Widget

Hi,
Can any one tell me how to create a button widget,
I've created one & it can be seen in my plugin, but it doesn't work,
in .fr file i created the widget as,
ButtonWidget
           kEXTCODGoButtonWidgetID,
           kSysButtonPMRsrcId,
            kBindNone,                        // Binding ,kBindRight | kBindBottom,
            Frame(50,70,140,90)                    // Frame (l,t,r,b)
            kTrue, kTrue,                     // Visible, Enabled
            "Run", // PNGIconAttributes, new for InDesign 3.0
in DialogObserver.cpp
for AutoAttach & AutoDetach,,
AttachToWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData)
DetachFromWidget(kEXTCODGoButtonWidgetID, IID_ITRISTATECONTROLDATA, panelControlData);
in ::update
WidgetID theSelectedWidget = controlView->GetWidgetID();
if (theChange == kTrueStateMessage)
//if (theSelectedWidget == kEXTCODGoButtonWidgetID
switch(theSelectedWidget.Get())
         case kEXTCODGoButtonWidgetID:
this->ViewOutput();
break;
please tell me what may be the wrong...

Hi,
Do you have any idea about how to get the class name (ex: kSplineItemBoss) from a ClassID.
I know how to get the class id;
                                                  ClassID unknownClassID = ::GetClass(unknown);
I found it from an example..
now i want to know which class name related to that ClassID..
Thanks.

How to create a button which unloads an iFrame and puts in its position another iFrame?

How to create a button which unloads an iFrame and puts in its position another iFrame?
It is very important for me if anyone could answer...
Thank you all in advance,
Frank

Ok I found it!!

Creating radio button and make it ennable

Hello All ,
Please help me out in creating radio button and make it ennable in web dynpro in java application .
If Possible please send the sample code as well.
Thanks
jyothi.

Hi Venkat,
The default value needs to be set manually as John has suggested. To be more precise, if the context node is "RadioButtonValues" and the context attribute is 'RadioBtnVal', then in wdDoInit() method, include the following:
wdContext.currentRadioButtonValuesElement.setRadioBtnVal("Male");
Regards,
Pavithra

How to create custom button by amending template in sc and change po screen

Hi,
Can anybody tell the steps that How to create custom button by amending the template in shopping cart or change purchase order screen.
Full points for the answer.
Edited by: shraman saha on Aug 17, 2008 6:44 PM

Hi,
I dont have any idea what you mean by Template for "Change Purchase Order" functionality. As far as i know there is a change button on the screen using which we go to the change mode and edit the PO.
About your other query: you do not require to download any HTML pages. To see the templates for PO go through the following path:
Transaction SE80 --> Internet options --> in the drop-down enter BBP_POC (for PO) --> Topic 99 --> HTML templates.
Then look for the following templates :
SAPLBBP_PO_UI_ITS 3000 --> for header basic data
SAPLBBP_PO_UI_ITS 4000 --> for item overview
SAPLBBP_PO_UI_ITS 4100 --> for item basic data
SAPLBBP_PO_UI_ITS 2200 --> for buttons.
Make appropriate changes to the screen and then publish it before using it. It is just like activating objects.
Hope this helps.
Thanks,
Pradeep

How to create radio button in reports

Similar Messages

Maybe you are looking for