How to create Short Lived process?..can neone pls help...

Hi,
Login into workbench. Click on Help->Workbench start page.
Lot of helps are there you can go through them. They will be helpful.
But it seems you are new to livecycle, so it will difficult to start through help. Either you can take help of any of your team member who is expert in livecycle or some training you should attend.
Thanks

Similar Messages

How to get status of a short lived process?

I have a short-lived process I call from servlet (submit servlet), I would know when the process has completed, I tried the following code, but it says
[3/3/09 10:35:37:593 PST] 0000002f SystemErr R Caused by: com.adobe.idp.jobmanager.common.JobNotFoundException
InvocationResponse invokeResponse = myServiceClient.invoke(invokeRequest);
String invocationId = invokeResponse.getInvocationId();
JobManager jobManager = new JobManager(myFactory);
JobId myJobId = new JobId(invocationId);
int counter = 0;
while((jobManager.getStatus(myJobId).getStatusCode() == JobStatus.JOB_STATUS_RUNNING) && ++counter < 60) {
Thread.sleep(1000);
Any help would be appreciated. Thanks in advance.

Nelson
As Paul has stated, there really isn't a good way to get the "status" of a short-lived process because being able to get such a status goes against what a short-lived process is intended for. Typically a short-lived process would run and promptly return any outputs to you. Personally, I like to distinguish long-lived versus short-lived by associating user steps with long-lived and their absence with short-lived (since short-lived processes can't have any user steps anyway). If you are still wanting to be able to retrieve the status of your process, I might encourage you to make it long-lived instead. This way, the tb_process_instance table can be used to check the process's status via its complete_time column. Alternatively, you could have a status variable in the orchestration itself such as a string you could update whenever you want to update the status. Since all process variables for long-lived processes are stored in the database, you could check this value to see where you're at with the process.
If you have any questions, please do let me know. You can email me directly or just respond on these forums. Good luck!
Josh Boyle
[email protected]
Cardinal Solutions Group

How to invoke a short lived process using web service start point?

I have a custom short-lived process that does not take any input parameter. I am able to successfully invoke the process from LiveCycle Workbench ES2. I want this process to be invoked by a java client through a web service call. Apart from the web service URL of my process (which looks like
http://<server>:<portno>/soap/services/MyApplication/MyProcess?wsdl&lc_version=9.0.0&versi on=1.0) do the java client know anything else? Any authentication is required?
My intention is to just find out what all the consumer of this process needs to know to invoke it through a web service call.
Was anybody able to test a short-lived process through a web service invocation from SoapUI?

I am not a programmer but I did find this article on he Developers Resource site that might lead you in th eright direction:
http://www.adobe.com/devnet/livecycle/articles/java_soap.html
Paul

How to create document in process chain

Hi,
can u plz tell me how to create document in process chain and wat i need to edit the text for particular info package when document.

Hi Anil,
Goto Tcode:RSPC and select your load data process type where you have to right click on the process chain and select Select create message,there are three types of messages
1>Successful
2>Error
3>Always
If you already created message then go to maintain message
Where you have two buttons
1>is for Edit Document
2>Maintain Recpiants
Goto Edit Document and put your comment and set their mail address in Mail recipiants.
Note there are 2 types of messages you can kept at execution of infopackage process type.
If load is successful send the mesaage to recipients
If load is failed send the message to mail recipt.
It would help you.

Problem invoking short-lived processes involving Document object

I have two LiveCycle instances on two different server environments(Dev and Test). I have a few common short-lived processes and forms. All these processes involve Document objects. These processes run fine on one environment(Dev) and have problem in the other(Test) for the same input parameters. Input parameters are Document(PDF) objects. I see this error when I invoke a process which has RenderPDFForm activitity in Test environment.
java.lang.IllegalStateException: [com.arjuna.ats.internal.jta.transaction.arjunacore.inactive] [com.arjuna.ats.internal.jta.transaction.arjunacore.inactive] The transaction is not active!
                at com.arjuna.ats.internal.jta.transaction.arjunacore.TransactionImple.commit(TransactionImp le.java:223)
                at org.jboss.ejb.plugins.TxInterceptorCMT.endTransaction(TxInterceptorCMT.java:501)
                at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:411)
                at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)
                at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)
                at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)
                at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke(ProxyFactoryFinderInterceptor. java:138)
                at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)
                at org.jboss.ejb.Container.invoke(Container.java:960)
                at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)
                at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)
                at $Proxy380.doRequiresNew(Unknown Source)
                at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:143)
                at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept(TransactionInt erceptor.java:72)
                at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
                at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept(InvocationStra tegyInterceptor.java:55)
                at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
                at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept(InvalidStateIntercep tor.java:37)
                at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
                at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept(AuthorizationInterc eptor.java:188)
                at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
                at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)
                at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed(RequestInterceptor ChainImpl.java:60)
                at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)
                at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)
                at com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.invoke(AbstractMessageReceiv er.java:329)
                at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invokeCall(SoapSdkEndpoint. java:139)
                at com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapSdkEndpoint.invoke(SoapSdkEndpoint.java :81)
                at sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)
                at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
                at java.lang.reflect.Method.invoke(Method.java:597)
                at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
                at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
                at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
                at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
                at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
                at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
                at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
                at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
                at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:637)
                at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:327)
                at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
                at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:290)
                at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
                at com.adobe.idp.dsc.provider.impl.soap.axis.InvocationFilter.doFilter(InvocationFilter.java :43)
                at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
                at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
                at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
                at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
                at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
                at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
                at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j ava:235)
                at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
                at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
                at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
                at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.ja va:182)
                at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
                at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
                at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
                at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java: 157)
                at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
                at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
                at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
                at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.ja va:583)
                at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
                at java.lang.Thread.run(Thread.java:662)
I tried comparing the configuration settings for these 2 environments and everything looks the same between the two environments except Health Monitor.
Total Physican Memory, Free Physican Memory and Free Swap Space. These parameters are vary big between the two envs. Other parameters look close.
Is this difference causing the process to fail in Test environment ? If yes, are there any other parameters that I can adjust to fix the problem with the process ?
If no, what could be causing the process in Test env to fail ?
Any ideas in this direction would be greatly appreciated.
Thanks,
Jyothi

I am modifying the correct httpd.conf file on the server, it just doesn't seem to work. - If I put the rewrite rules in the <Directory /> the rewrite works but it adds /Library/WebServer/Documents to the URL.
I also tried putting the rewrite rules in <IfModule mod_rewrite.c> but that did not work either.
mod_rewrite is enabled and running on the server.
I will post the rewrite rules again in the code brackets. Sorry for the long post. - If some one can try them out on their Leopard Server to see if they can get them to work, it would be much appreciated. Again, these work on my Leopard Client but I can't get them to work on Server.
-- The httpd.conf file posted above is just the default conf file found in /private/etc/apache2/
<code>
RewriteEngine On
Options +FollowSymLinks
RewriteRule ^(.+)/$ http://%{HTTP_HOST}$1 [R=301, L]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.php(.*)\ HTTP
RewriteRule (.+)\.php(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.asp(.*)\ HTTP
RewriteRule (.+)\.asp(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.aspx(.*)\ HTTP
RewriteRule (.+)\.aspx(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.htm.(.)\ HTTP
RewriteRule (.+)\.htm.(.)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.cfm(.*)\ HTTP
RewriteRule (.+)\.cfm(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.bak(.*)\ HTTP
RewriteRule (.+)\.bak(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\.inc(.*)\ HTTP
RewriteRule (.+)\.inc(.*)$ $1$2 [R, L]]
RewriteCond %{THE_REQUEST} ^GET\ ([^\?]+)\..(.)\ HTTP
RewriteRule (.+)\..(.)$ $1$2 [R, L]]
<code>

How to create interface where you can view metadata of several databases

How to create interface where we can view metadata of several databases:
Oracle Apex should display metadata of this particular DB (later on we can include multiple DB’s)
          a. Report should first display DB name
          b. When clicked on DB name, should display 3 schemas
          c. When clicked on 1 schema, should display tables – when clicked on each table,
          should display various column names and its corresponding metadata.
          (similarly for other schema’s also)
          d. In short, it should be like a drill down report.
Help required for craeting like above.
Appreciate your help.

I did something similar a while back. I had an application reading from multiple schema's for reporting purposes..IN that case atleast we just would build the selects using a function reurning SQL select, so that we could have an application item with the selected schema they wanted to use to build into the select returned...
For forms, that would be an interesting idea, don't know how you can dynamically change the table owner name, since it is a drop down control in development..
Thank you,
Tony Miller
Webster, TX
I cried because I did not have an office with a door until I met a man who had no cubicle.
-Dilbert
If this question is answered, please mark the thread as closed and assign points where earned..

How many parallel BPEL child processes can be invoked on single BPEL server

Hi,
Can anyone pls let me know
1. How many parallel BPEL child processes can be invoked on single BPEL server at same time?
2. How number of Invoker threads, Worker threads and DB connection pools are affecting the BPEL server's listener thread spawning capacity?
Thanks in advance.
-S

Hi James
Here is my problem. I need to do this for load balancing. I have two instances of SOA Suite running on single machine, i.e. two different BPEL servers. Now i need 2 BPEL instances on each server, i.e. two SOA Suite and four BPEL instances (Two BPEL servers on each SOA Suite)
I tried to create a new OC4J instance on my app server and named it as OC4J_new. By default OC4J instance would have these application installed:
ascontrol
ccore
coreman
datatags
default
esb-dt
esb-rt
gateway
hw_services
javasso
orabpel
orainfra
policymanager
ruleauthor
rulehelp
But when i create new OC4J instance, i can see only these applications:
ascontrol
datatags
default
javasso
How do i get rest of the applications in my new OC4J Instance??
I tried deploying .EAR files but it failed all the time. What are possible fixes?
Many thanks in advance

Can someone pls Help me: How to create a Fake target table(Dummy) in DAC

Hi There,
Can someone pls Help me in creating a Fake target table(Dummy) in DAC?
Thanks,
Raghu

Raghu
You need to create a task so that you can hook sources and targets together.
First, Design --> Tables tab --> New --> Below 'Edit' -->Table Type (Source) for your source tables.
Design --> Tables tab --> New --> Below 'Edit' -->Check warehouse and Table Type (Fact or Fact Temporary) for your target tables.
Points if helpful
Kris

How to create authorisation object for save button please help in abap

how to create authorisation object for save button please help in abap

Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Regards
ANJI

I accedentally switched my iTunes to the UK store and I don't know how to switch it back. Can someone please help?

I accedentally switched my iTunes to the UK store and I don't know how to switch it back. Can someone please help?

Click here and follow the instructions to change the iTunes Store country.
(105976)

HT4528 I accidently put all my pics from my computer onto my phone and i have no idea how to get them off. Can u please help me?

I accidently put all my pics from my computer onto my phone and I have no idea how to get them off. Can u please help??

PhilipRoy wrote:
Please see this article about transferring photos from a mobile device to a computer.
http://support.apple.com/kb/ht4083
Good luck Friend.
That's not going to help. That article is for moving photos from iOS device to computer, not for removing them. Additionally, photos synced via iTunes cannot be manually removed from the device. You have to use iTunes to 'unsync' them, as FoxFifth stated.
Camera Roll pictures are the only ones that can be imported from device to computer. Album folders cannot be moved from device to computer.

I got an email that said I have unused iTunes Store credit associated with your Apple ID. I can't find how to accesss those credits. Can someone please help me?

I got an email that said I have unused iTunes Store credit associated with your Apple ID. I can't find how to accesss those credits. Can someone please help me?

Dakota-- I received a notice from them once about the same thing.They just want you to spend some more.All I have ever done is buy and redeem itunes cards.When I do that,I have a credit balance.To "access" your credits,you simply need to buy something.

Why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

why is my powerpoint not working 10.9? i can't play my existing file and new files that i work..? how to fix that one..? pls help..!

R Cubss,
You might want to read down this thread. There are a lot of tips-n-tricks, and maybe one will be right for you.
http://www.adobeforums.com/webx/.59b6565c/43
Good luck,
Hunt

I purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

i purchased an iPod touch few months back. And i am very upset with the volume output it produces. iPod being an music player, has poor volume quality then my iPhone 3gs. Can anyone pls help. How do i rectify it?

Problem with both the speaker and earphones?
Have you tried another pair of headphones?
Yu can try the standard fixes to rule out a software problem:
- Reset. nothing is lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.

Can u pls help me

i m a beginner to form .i have an issue.can u pls help me to solve it
i m working in forms6i.
I have created a grid in a data block emp which populates data from Employee table. Corresponding to each row in the grid there are check boxes which can be checked and unchecked.The pblm is that we shld not allow the user to check two check boxes at same time.if so then the buttons(ok,cancel) should be disabled.
How to do it.(write the code) can u pls help me.

Hi User
You have to pst this in forms forum forum id=82
comming to ur problem
in the when- check- box-change trigger you place the code in such a way and validate the whole block by checking is there iny item already checked. if so then set_item_property of the buttonss as disabled.
Thank you
Sasi
[email protected]

How to create Short Lived process?..can neone pls help...

Similar Messages

Maybe you are looking for