How to create the maps externally and import in to PI

Hello Gurus,
Please let me know how to create the maps externally and import into PI
Regards
shankar

Hi,
Hope these links could help you understand XSLT, JAVA nad ABAP mappings.
[http://www.riyaz.net/blog/beginners-guide-to-xslt-mapping-in-sap-pi/technology/sap/769/]
[http://www.dataxstream.com/2009/09/allow-additional-mapping-types/]
[http://www.riyaz.net/blog/sap-pi-abap-mapping-simplified/technology/sap/837/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3ARiyaznetBlog(riyaz.net)]
[http://www.riyaz.net/blog/xipi-java-mapping-demystified/technology/sap/415/]
Regards,
Prasanna.

Similar Messages

How to create the Export Data and Import Data using flat file interface

Hi,
Request to let me know based on the requirement below on how to export and import data using flat file interface.....
Please provide the steps involved for the same.......
BW/BI - Recovery Process for SNP data.
For each SNP InfoProvider,
create:
1) Export Data:
1.a) Create an export data source, InfoPackage, comm structure, etc. necessary to create an ASCII fixed length flat file on the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
1.b) All fields in each InfoProvider should be exported and included in the flat file.
1.c) A process chain should be created for each InfoProvider with a start event.
1.d) If the file exists on the target drive it should be overwritten.
1.e) The exported data file name should include the InfoProvider technical name.
1.f) Include APO Planning Version, Date of Planning Run, APO Location, Calendar Year/Month, Material and BW Plant as selection criteria.
2) Import Data:
2.a) Create a flat file source system InfoPackage, comm structure, etc. necessary to import ASCII fixed length flat files from the XI
ctnhsappdata\iface\SCPI063\Out folder for each SNP InfoProvider.
2.b) All fields for each InfoProvider should be mapped and imported from the flat file.
2.c) A process chain should be created for each InfoProvider with a start event.
2.d) The file should be archived in the
ctnhsappdata\iface\SCPI063\Archive directory. Each file name should have the date appended in YYYYMMDD format. Each file should be deleted from the \Out directory after it is archived.
Thanks in advance.
Tyson

Here's some info on working with plists:
http://developer.apple.com/documentation/Cocoa/Conceptual/PropertyLists/Introduc tion/chapter1_section1.html
They can be edited with any text editor. Xcode provides a graphical editor for them - make sure to use the .plist extension so Xcode will recognize it.

Class override, how to create the child class and then the base class

I started to write a program for a smart DMM, the problem is every version of the DMM the company change the communication commend.
My idea is to write a child class for every DMM version and every SubVI of the child will override the base class SubVI.
My problem is, i want first to create one child class and after i will see every thing is work, start to create the base class. that way i will see if am thinking the right way.
My question is
How can i create a child class and then create the base class and configure the SubVi of the child class to be Override of the base class?
I tried to search in the property of the class but i didn't see nothing.
Thanks
Solved!
Go to Solution.

This can be done and I've done it on occasion.
You simply create the base class with the dynamic dispatch methods you require (connector panes need to be identical to thos of the child class).
Then set the inheritance of the class to inherit from this base class. If your method is defined as a dynamic dispatch method in the parent, you'll most likely now have some errors (unless your child method was already DD in which case you might just be OK already).
To change the inheritance of a class, right-click the properties of the class in your project and select properties. I believe the ineritance tree is at the lower end of the properties. Click on the "change inheritance" (or something similar) to choose the class from which you now wish to inherit.
Say hello to my little friend.
RFC 2323 FHE-Compliant

How to create the custom method and make it available to clients:

Hello, Can any one help me with this problem ASAP??
I am trying to work on an example of "Customizing the Query and Creating an Associated Custom Method"
from http://helponline.oracle.com/jdeveloper/help/topics/jdeveloper/developing_mvc_applications/adf_pviewcustommethod.html?tp=true#method. To do that, the first task is to create the custom method and make it available to clients.
Following instructions in the helponline documentation, I completed the three steps: (1) "Specify a custom query for the View Object definition for EmployeesView", (2) "Add the custom method to the application module Java class", and (3) "Make the method available to clients".
The following is the error message I got to test the application module. Can anyone tell me what the message really means and what I should do. I am wondering if there is any mistakes in the document.
(oracle.jbo.SQLStmtException) JBO-27122: SQL error during statement preparation. Statement: SELECT Employees.EMPLOYEE_ID, Employees.FIRST_NAME, Employees.LAST_NAME, Employees.EMAIL, Employees.PHONE_NUMBER, Employees.HIRE_DATE, Employees.JOB_ID, Employees.SALARY, Employees.COMMISSION_PCT, Employees.MANAGER_ID, Employees.DEPARTMENT_ID FROM EMPLOYEES Employees WHERE Employees.SALARY > :1 and Employees.DEPARTMENT_ID = :2
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) ORA-01008: not all variables bound

You need to set values for the parameters in your query before you try to execute the query in the view object.
So you need to call the setBindVars method before the query.

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

How to create the users applvis and oravis..?

Hi All,
I had done witha single box installation of 11.5.10.2 on RHEL Release 4
While installation, it has installed with a single user named 'oracle' , that is owning the application and database
now how can i make the applvis and oravis users and give them the user privileges..?
Many thanks in advance....

You can live with 'oracle' user with 'dba' default group to manage the application/database especially if you have a single node installation.
If you want to shift to multi-user, create one application manager user 'applprod' and one database manager user 'oraprod' and make the 'dba' the default group for both of them.
'applprod' user owns $APPL_TOP, $COMMON_TOP, 8.0.6_HOME and $IAS_HOME
'oraprod' user owns $ORACLE_HOME and the datafiles.
If you want these two users to manage your environment then you have to change the ownership

How to create the Vote Form and Get the Result

I have an assignment to create a website for voting and show the result online. Anyone can tell me the steps to build such website???

This tutorial uses jQuery and PHP
http://code.tutsplus.com/tutorials/creating-a-dynamic-poll-with-jquery-and-php--net-57
Nancy O.

How to create the verify.der file in portal ? valid to and valid from

hi Experts,
am facing the problem in SAP logon method without user mapping but it's having a problem, The problem is create the Transaction iview it's not there . Back end server is not response how to create the Valid TO and Valid From in portal.
Thanks & Regards
Chandu

Chandu,
1. Start the SAP J2EE Engine Visual Administrator: C:\usr\sap\<SID>\JC00\j2ee\admin\go.bat.
2. Navigate in the left tree panel to Cluster -Server -Services -Key Storage - Runtime TicketKeystore - SAPLogonTicketKeypair u2013cert.
Here you can go ahead and create a new ticket.
Hope that helps.
Cheers,
Sandeep Tudumu

How to create the OSB artifacts in JDeveloper

The docs I've seen get me a little closer in being able to test the DB and AQ Adapters on the OSB, but it really does not help me understand how to do it through JDeveloper.
In the past we have done all of the OSB development in Eclipse and then imported it into the OSB.
Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. I know there is an optional Eclipse component that you can install with OSB. Will we have to use both tools? (e.g. Eclipse for the OSB components and then JDev for the Adapters.)
Anyone have clarification?

Again, the docs I've seen shows how to do the Adapter configuration in JDeveloper and then how to create the Business Services and Proxy Services directly in the OSB console.WSDL/Binding generation is required to be done in JDEV. OEPE/Workshop doesn't have these adapter plugins to generate WSDL and Bindings. Once the WSDL/Binding are generated you can either use sbconsole or OEPE/workshop for your usual development.
But I need to know how to create the OSB artifacts in JDeveloper then import them into the OSB or if this is even possible. There are no OSB artifacts that need development in JDEV. As you are aware the oracle adapters exposes back-end functionality in XML interface. This XML interface is modeled by WSDL. For adapters to work we need the WSDL and corresponding binding. Since OSB JCA transport uses adapters, we are required to provide these components.
Will we have to use both tools?For any services that are using JCA adapters, we need to use both (JDEV and (sbconsole or OEPE) ).
IF your services doesn't have to use JCA adapters then JDEV is not required.
Let me know if you have any questions.
Manoj

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to create a map that is larger than the game in width and height?

hi,
i wounder how i can create a map(not the design) that is larger than the game in width and height, part of it will appear in the main page and anther part you can move to it after you press the arrow symbol, but the map is just one image so i want put it in line and out line the game page, and the out line part includes buttons and symbols the player can use, but it will be in line and the other part will be out line when you press the left arrow or the down arrow, how i can do that?
and is that possible to animate it so when the player press the arrow, will give it action to start the animation in one sec, i know how to animate it if that possible but i don't know which code i will use for the mouse click with the arrow symbol, and how to use the same code in the same symbol to start anther animation depending on which part of the map is on?

I don't know a lot about mask and masked layers and how to work with the normal layers beside i will use some 3D graphics but not in the background, i will explain all this to you to be more clearly.
first i am using action script 3.0
close ex,
you have 2d map"image" 900*300 pixel.
this image contains some 2d symbols when you click will go to anther normal map (anther normal layer) so they must appear.
your game 320*320 px, and the place the map will show on 300*300, and there's basics objects will be in most pages including the page that show the map so i don't know a lot about how this will work with mask layers.
so you can only see the left side of the map image and what it contains, while there's two arrows one to the left and one to the right there's three cases here,
first when it show the left side(start from x:0 to x:300), the left arrow will not active when you press and the right arrow will start an animation that make the map image move to the mid side in one sec when you press.
in mid side (start from x:301 to x:600) the same left arrow will active when you press to send you back to the left side while the same right arrow will be active to send you not to the mid side but to the right side,
when moved to the right side the same left arrow will be active to send you to the mid and the right will not active when you press and depending on that,
first how to make the large image appear with the three sides in the same place without effecting the other objects "like disappearing them" ?
and the codes i need in the same left or right arrow symbol to make different actions with the same symbol when clicked depending on which part of the map is on.

How to create the floating message view like Map app and Safari does?

Hi, guys,
I am trying to implement a information message view like the Map app and the Safari does.
Here is the description:
1. When you drop a pin in the Map app and then tap on the pin, you always can see a floating transparent message on the top of the pin.
2. When you tap and hold on a link in the Safari app for a few seconds, you can also see a same message view like the Map app does and without showing the disclosure button.
All I want is such kind of thing, but I had look through out the documentation and the Interface Builder components list. I can not find such a component.
Does anybody has a similar experience on implement this?
Thank you guys..

You're not going to find a control to do this for you. You will have to create a subview and set the properties (color, frame, etc) yourself.

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to show the first page and then rest will be created in background

Dear Friends,
I am suffering from some seriouse issue of slow opening of report....
I am using vs2005 and asp.net 2.0 and crXI R2 sp4,
using oledb for getting data from ms sql server 2005.
Now my one report called accounts ledger
when i execute the report query it takes 1.03 mins for 515000 records..no issue with it ,
when i execute the report from report desginer for 515000 records its taking 26 mins . It is generating all
32000 pages.
Now same report i run from my web based erp application it takes 30mins to execute 32000 pages now
this is too much time it is taking and now our client is fedup of ussss..
So is there any way that we can show First page at the earliest and rest of the pages willl be getting created in background? is it possible ?
We have to give them the solution as sson as possible...
can anyone suggest the diff ways to get out of this problem .......
Please ur co operation will be appriciated....
thansk

Hi Mithun,
Here are a few points related to performance issue. These might be helpful.
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards,
Shweta

How to create the maps externally and import in to PI

Similar Messages

Maybe you are looking for