How To Create the source data in the destination part of Shuttle in APEX?

Hi,
I create a shuttle in a region, and I can specify the source list value in the left part of the shuttle, and how can I create the original data in the right part(destination field).
Now the destination part alwasy is null at first when open the page.
So any idea? or Shuttle in Apex just can set the source data in the left part?
Edited by: PPMonkey on Jun 18, 2009 10:10 PM

Re: How do you populate right side of Shuttle control

Similar Messages

[APEX 3] Requested source data of the report has been modified

Hello APEX-Friends,
I have a common problem but the situation is a bit different here. Many of you might know the "invalid set of rows requested the source data of the report has been modified" problem. Often it occurs on submit. That means, you have a report, you select rows, you do things, you submit the page and everything blews up.
This is because you enter some values into fields the report depends on and so you modify your report parameters and the source data changes.
But:
In my case I have a dynamically created report that blews up before any submits occur or values change.
My query is a union of two selects. Both query different views. Those views use a date field as parameter and some compare functions.
I read the field with a V-Function i wrapped arround the apex V Function - declared as deterministic. My date compare function is also declared deterministic (I doubt this makes any differences as it might be only important for the optimizer, but as long as I don't know exactly what APEX evaluates, I go for sure).
I ensured, that the date field is set by default with the current date (and that works, because my interactive report initially displays correct data from the current date).
So everything is deterministic and the query must return same results on subsequent calls, but APEX still throws this "source data has changed" error and I am to 99.99% sure, that this cannot be true.
And now the awesome thing about this:
If I change the value of the date field, an javascript performs a submit. The page is reloaded (without resetting pagination!) and everything works fine. I can leave the page, reenter, do things - everything works well.
But if I log into the application and directly move to the corrupted report and try to use the pagination without editing fields or submitting the page the error occurs.
Do you have any Idea what's happing there? I could try to workaround this by submitting the page the first time it's entered to trigger this "mystery submit" that gets everything working. But I would like to understand this issue and have a clean solution.
Thanks in advance,
Mike aka UniversE

Okay, I found a solution, but I do not understand it - it might be a design flaw in APEX.
I mentioned the date field that is used in the query. I also mentioned that it is set with the current date by default. I did not mention how.
There are some possibilities in APEX to do so.
1. Default-Setting in the element properties
2. Static assignment if no value is in session cache
3. Computation before header
I did the first and second.
BUT:
An interactive report seems to work as follows. A query is executed to get all rows of the report. Then a second query is executed to get the rows that shall be displayed. And the order is screwed up, I think.
1. The first report query to get all rows
2. The elements are loaded and set to default values
3. The second report query to get the display rows
And that's the reason why nothing worked. Scince I added a computation before header the date field is set before the report queries are executed and everything works all fine now.
But I think it's a design flaw. Either both queries shall be executed before Regions or afterwards but not split as field values might change when elements are loaded.
Greetings,
UniversE

How ODI will reduce the source data to process?

By using ODI we can get High efficiency of integration by reducing the volume of source data processed in the flow. How ODI will reduce the source data to process?

Hi ramana,
See the example.
DO.
   READ DATASET s_filename INTO I_TEMP.
   IF SY-SUBRC <> 0.
    EXIT.
   ELSE.
     move I_TEMP to I_FINALTAB.
     append I_FINALTAB.
     clear I_FINALTAB.
ENDIF.
ENDDO.
     In the above code we are moving the data form file to i_temp and i_temp to I_FINAL.
Here before moving to i_FINAL.
use TRANSLATE i_temp to UPPSERCASE.
Then move to i_final.
Pls. reward if useful.

How to create an IDoc just with the updated data.

Hello I have a question regarding IDocs.
In case I updated an existing material.
Is there a transaction where I can put a matnr in, that reads the change pointer table and creates an IDOC with just the updated fields for an existing material.
Like the transaction BD21, for example. But there I just have the possibility to enter a message type and not a material number.
If there is no standard transaction. What steps do I have to do to achieve this goal?
Kind regards,
Tobias

thanks a lot for your fast answers. but I want to decide weather I want to create a idoc that includes all data for a material (using transaction bd10) or create an idoc that includes just the updated data.
The program logic should be the following:
Select all materials in the change pointer table (that have been changed or new created).
Check what value has been changed.
If it is value YSAPSYSTEMXX (extension of mara) then create a idoc with all data for the material.
If not YSAPSYSTEMXX has been changed create an idoc that includes just the updated data.
For Idocs that include all material data I would use sap standard transaction BD10 and batch-input.
For Idoc that should only include the changed/updated data I am searching for a corresponding transaction.
Kind regards,
Tobias

How to handle duplicate Primary Key entries in the Source data

This is my first experience with ODI.
I receive Source data from the customer that includes a one letter designation, ACTION_CODE, in each record of data as to the disposition of the record:
‘R’ represents Re-issue in which case I’m to modify the corresponding Target record based on the Primary Key.
‘N’ represents an Insert in which case I’m to insert a new record into the Target.
‘D’ represents a delete in which case I’m to delete the record with the corresponding Primary Key from the Target.
The Source data comes in an XML file and the Target is an Oracle DB.
I have chosen the IKM Oracle Incremental Update (MERGE) Knowledge Module.
I filter ACTION_CODE to just collect records that are ‘N’ or ‘R’ and I exclude the ACTION_CODE from the mapping but since within the same Source
set there may be an ‘N’ and ‘R’ with the same primary key I receive Primary Key errors.
Should I alter CKM to not check for duplicates in the Source?
Is there a better way?

Ganesh,
Identifying Duplicates is a logical activity. More or less it need Manual intervention to judge both the records means common. if few unique paramenters like Telephone, Pincode, SSN, passport no etc can be used on filters for searching the records. Currently there are no automatic method to identify the duplicates. In MDM 5.5 SP04 which is next release there will be auto de-duplicate facility based on tresholeds and matching criteria that you will setup.
I hope i have answered your query transparently. if you have any queries futher you can reply here.
Regards
Veera

How to create 3.x data source in bi 7

Hi Guys,
can anyone tell me<b> how to create 3.x data source(emulated) in bi 7.0 </b>
pls reply me this is urgent
ravi

Ravi,
Please do not multiply the same question several times. The answer is given in the other replica:
how to create 3.x filesystem data source(emulated) in bi 7.0

How to create a custom panel in the right way (without having an empty panel in the file info) ?

Hi Everyone
My name is Daté.
I'm working in the fashion industry as a designer and Design consultant to help fashion brands improving the design workflow by using Adobe softwares and especially Illustrator.
I'm not a developper, but i'm very interested about the possibility to introduce xmp technology to provide more DAM workflows in the fashion industry.
Fashion designers produce a lot of graphical objects in illustrator or Photoshop. Unfortunately they are faced to a big challenge which is about how to manage, search, classify and get this files faster. Of course PDM system or PLM system are used in the Fashion industry to manage data, but for many companies, implemanting this kind of database is very complex.
When i look at what you can do with xmp, it seems to be an interesting way of managing design files, then i started to follow Adobe instruction to try to build a custom panel.
The main idea is to (Theory) :
create custom panels used by fashion designers to classify their design files.
Use Adobe Bridge to search files, create smart collection to make basic reports in pdf and slideshows
Find someone to make a script able to export metadata in xml files
Use indesign and the xml file to generate automatically catalogues or technical sheets based on xmp values
I have created a custom panel by using the generic panel provided by Adobe and i have modified the fields to feet with the terms used in the fashion industry and it works well.
But unfortunately, when i try to create my own custom panel from scratch with Flashbuilder (4.6) and the Adobe CSExtensionBuilder_2 (Trial version), it doesn't work!
Here is the process :
I have installed flashbuilder 4.6
I have download the XMP Fileinfo SDK 5.1 and placed the com.adobe.xmp.sdk.fileinfo_fb4_1.1.0.jar in C:\Program Files (x86)\Adobe\Adobe Flash Builder 4.6\eclipse\plugins
In Flashbuilder, i have created a new project and select xmp Custom panel
The new project is created in flashbuilder with a field with A BASIC Description Field
To generate the panel, right click the project folder and select xmp / Publish Custom Panel
The panel is automatically generated in the following folder : C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels
Go to illustrator, Open the file Info
The panel appears empty
The others panel are also empty
The panel is created and automatically placed in the right folder, but when you open it in Illustrator by selecting the File Info option in the File Menu, this custom panel appears empty!!! (only the title of the tab is displayed). This panel also prevent the other panels to be displayed.
When you delete this custom panels from the folder C:\Users\AppData\Roaming\Adobe\XMP\custom file info panels\3.0\panels and go back to the File Info, the other panels display their content properly.
I also try to use the plugin XMP Namespace designer to create my own namespace. this plugin is also able to generate a custom panel, but this one also appears empty in AI or Photoshop.
I try to follow the process described in Adobe xmp documentation many times, but it didn't works.
It seems that many peaople have this issue, but i dodn't find a solution in the forum.
I try to create a trust file (cfg), but it didn't work.
It would be so kind if you can help me to understand why i can't create a custom panel normally and how to do it in the right way.
Thanks a lot for your help,
Best regards,
Daté

Hi Sunil,
After many trial, i realize the problem was not coming from the trust file, but from the way i have created the custom panel.
There is 2 different ways, the first described below is not working whereas the second is fine :
METHOD 1 :
I have downloaded the XMP-Fileinfo-SDK-CS6
In the XMP-Fileinfo-SDK-CS6 folder, i copied the com.adobe.xmp.sdk.fileinfo_fb4x_1.2.0.jar plugin from the Tools folder and i pasted it in the plugind folder of Flashbuilder 4.6
The plugin install an XMP project
In Flashbuilder 4.6 i have created a new project (File / New /Project /XMP/XMP Custom Panel)
A new xmp project is created in flashbuilder.
You can publish this project by right clicking the root folder and selecting XMP / Publish Custom Panel
The custom file info panel is automatically published in the right location which is on Mac : /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/3.0 or /Users/UserName/Library/Application Support/Adobe/XMP/Custom File Info Panels/4.0
Despite the publication of the custom file info panel and the creation of a trust file in the following location : "/Library/Application Support/Macromedia/FlashPlayerTrust", the panel is blank in Illustrator.
I try this way several times, with no good results.
METHOD 2 :
I have installed Adobe CSExtensionBuilder 2.1 in Flash Builder
In FlashBuilder i have created a new project (File / New /Project /Adobe Creative Suite Extension Builder/XMP Fileinfo Panel Project)
As the system display a warning about the version of the sdk to use to create correctly a custom file info, I changed the sdk to sdk3.5A
The warning message is : "XMP FileInfo Panel Projects must be built with Flex 3.3, 3.4 or 3.5 SDK. Building with Flex 4.6.0 SDK may result in runtime errors"
When i publish this File info panel project (right click the root folder and select Run as / Adobe illustrator), the panel is published correctly.
The last step is to create the trust file to display the fields in the panel and everything is working fine in Illustrator.
The second method seems to be the right way.
For sure something is missing in the first method, and i don't understand the difference between the XMP Custom Panel Project and the XMP Fileinfo Panel Project. Maybe you can explain it to me.
So what is the best solution ? the right sdk to use acording to the creative suite (the system asks to use 3.3 or 3.5 sdk for custom panels, so why ?)
I'm agree with Pedro, a step by step tutorial about this will help a lot of peaople, because it's not so easy to understand!!!
Sunil, as you belong to the staff team, can you tell me if there is :
A plugin or a software capable to extract the XMP from llustrator files to generate XML workflows in Indesign to create catalogues
A plugin to allow indesign to get custom XMP in live caption
A plugin to allow Bridge to get custom XMP in the Outputmode to make pdf or web galeries from a smart collection
How can you print the XMP data with the thumbnail of the file ?
Thanks a lot for your reply.
Best Regards
Daté

How can I use MY data in the GLV_GigaLabVIEWMemoryStoreAndBrowse.vi?

Hello everyone,
As I use large data files (500MB) and need to be able to view them in graphs, I was reading this arcticle about Managing Large Data Sets, and found the GLV_GigaLabVIEWMemoryStoreAndBrowse.vi example in the "Fast Data Display with Decimation" section of it. It is exactly what I need, but, of course, with my data... So, how could I rearrange this file to be able to see not it's own data, but the data I acquired with the TDMS Writer (1D array of waveform data)?
Thanks,
Rafael

There are several options, but I would recommend using the already existing file as your data buffer. This will replace the internal data structures (queue or functional global) for the main data, not the decimated preview. I would do it as follows:
Replace the number of points front panel control with a path control called Filename. This will allow you to specify your file.
Modify the command enum so Change NPoints is Change Filename (only needed for us humans).
In the Value Change event (top loop) for Filename (create one if it is not already there, delete the nPoints one if it is still there), stuff the command queue with Change Filename.
Create a local shift register in the bottom task handler loop (similar to the one in the traditional memory store and browse) to hold your file reference.
In the Change Filename frame of the task handler, close the file reference (if it is valid) and open a new file reference using the TDMS functions (use the file name terminal to read the file name).
Replace all instances of reading or generating the main data with the corresponding TDMS function using the new file reference. For example, in the Change Filename case, replace the Sine Wave.vi with a TDMS Read.vi which reads the corresponding subset. Make your chunk size 65,000 points for best speed.
I have never done this with TDMS (only because I stopped working with file I/O before TDMS was invented), but have done it with raw binary, NI-HWS, and HDF5. All worked well, so you should have no problems.
This account is no longer active. Contact ShadesOfGray for current posts and information.

How to load the existing data from the databse in the CMP entity bean?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

you have to use findByXXX methods. depending on your appserver you may have to declare them (and eventually the query you want to be used) in the vendor specific deploiement descriptor.
(e.g. using jboss i don't remember having explicitly declare the findBySomeField method - where someField is a persistent field - in the dd, whereas with bas all finder methods have to be explicitly declared)
[note that obviously these methods have to be present in your home interface]

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

How to create some columns dynamically in the report designer depending upon the input selection

Post Author: ekta
CA Forum: Crystal Reports
how to create some columns dynamically in the report designer depending upon the input selection
how export this dynamic report in (pdf , xls,doc and rtf format)
report format is as below:
Element Codes
1
16
14
11
19
10
2
3
Employee nos.
Employee Name
Normal
RDO
WC
Breveavement
LWOP
Sick
Carers leave
AL
O/T 1.5
O/T 2.0
Total Hours
000004
PHAN , Hanh Huynh
68.40
7.60
76.00
000010
I , Jungue
68.40
7.60
2.00
5.00
76.00
000022
GARFINKEL , Hersch
66.30
7.60
2.10
76.00
In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
Can anybody help me how do I design such report....
Thanks

Hi Developer life,
According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric values) in the details, add an filter to filter the data base on this column group, but if
the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
Similar threads with details steps for your reference:
https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings
If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
Any question, please feel free to let me know.
Best Regards
Vicky Liu

How to Enter the existing data in the entity beans?

hello
my problem is as follows--
i am creating a CMP entity bean.in these beans client create the data instances using create() function.
now a entity bean will be created for the newly created data and it's EJBObject will also be formed.
now we will be able to perform finder methods over them.
remember these data has been newly created in the database.
but now if i want to perform the finder methods on the
existing data in the database( i don't need to use create() fn as i am not "creating" the data.). how will i perform the query over the existing data.
basically i have to make a CMP bean to extract the data corresponding to a particular condition , from the database table. i don't want to create the data in the database but just find out what data satisfies my condition.
thanking you
Prashant

All I say here is based on limited knowledge on 1.1 ejb specification. There could be improvements on 2.0 spec. 1.1 specification does not formaly provide how the finders should work for container managed beans. It leaves it at the hand of bean providers. Currently bean providers describes the finers in a description of the Entity Bean. Refer to documentation accompanied with application server you are using.
I attach the famous bank account example in weblogic server.
<finder-list>
<finder>
<method-name>findBigAccounts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
<finder-query><![CDATA[(> balance $0)]]></finder-query>
</finder>
</finder-list>
Method definition in Home inteface is
public Enumeration findBigAccounts(double balanceGreaterThan)
throws FinderException, RemoteException;

How to obtain the row data in the component datatable?

if I want to edit a row data, and then know which row is edited in the component datatable, and how to do?
How to obtain the row data in the component datatable, and update it to database, not simplely edit a simple table
Any ideas? Thanks

Thank you very much for your help Alexander !
It's quite confusing when you leave Struts and try to adapt your projects for JSF for the first time...
I wanted to click on a row with a "onMouseClick" on the TR tag like I used to do in Struts/JSTL. But it seems to be impossible in a dataTable.
Ok then. I've added a column at the end of the row with an icon.
But eventually I didn't need to declare link parameters.
In my BackingBean I did like this :
public String selectEventForUpdate() throws IllegalAccessException, InvocationTargetException {
        PortletAgenda event = (PortletAgenda) JSFUtils.getInRequestMap("event");
        BeanUtils.copyProperties(this, event);
        return null;
   }JSFUtils.getInRequestMap(...) is a method I wrote in a util object :
public static Object getInRequestMap(String name) {
        Object res = null;
        Map requestMap=FacesContext.getCurrentInstance().getExternalContext().getRequestMap();
        if (requestMap!=null) {
            res=requestMap.get(name);
        return res;
} " event " is the name of the item in my dataTable list.
My backingBean has the same attributes as "event".
So when the page is reloaded I have a backingBean full with the selected properties to edit/update.
Thanks to your reply I realized that putting this form in the middle of the dataTable seems to be impossible.
So I put this form in a floating DIV in front of the table with a shadow.
It works :o) !
But I'm a little bit disapointed to be honest...
I used to build my web applications with Struts and JSTL and doing this kind of interface was really easy.
I've decided 3 days ago to convert into JSF because the "GUI Layer" seemed to be improved.
But now I realize that I cannot put a onMouseOver and onMouseClick on a row and I cannot display a different row in the middle of a table....
I think it's a shame because there is a facet for header and footer.
And it would be great if we could create our own personal facet that appears only if a condition is true.
For exemple " if the current item id is the same as the request parameter id then display the following facet content ....... (with a panel group and a form inside to update the row) "
It's easy to do that with JSTL thanks to c:forEach and c:if but it seems to be impossible to use JSTL tags like this during the dataTable iteration.
And JSF tags seems to have no logical tags like " if " or loops that can be nested in dataTable.
I really need to realize this interface (you click on a row then an edit form appears where you clicked).
Do I have to write a component myself that extends dataTable?
Do you know if writing such a component is hard to do for a beginner like me?
(I've juste discovered JSF 3 days ago and I've used Struts/JSTL for 2 years til now)
I'd be glad to have much advices from you about that.
Regards

How to get the spool id or how to create a spool id for the report .

hi,
how to get the spool id or how to create a spool id for the report .
this spool id i have to use it in CONVERT_ABAPSPOOLJOB_2_PDF fm to get the pdf download file.
my requirement is to download a pdf file from the alv grid list.

Hi Raghu,
Execute this program.
REPORT ZTEST_3318                              .
tables: usr01.
perform send_report_to_spool.
*&      Form send_report_to_spool
      text
form send_report_to_spool.
data: loc_dest like pri_params-pdest,
        wf_listname type char12,
        wf_listtext like PRI_PARAMS-PRTXT,
        wf_copies type i,
        wf_days type i,
        wf_PARAMS LIKE PRI_PARAMS,     " achieving file PRI_PARAMS.
        wf_valid type c.
clear : wf_listname , loc_dest , wf_listtext .
move: 'AP interface' to   wf_listname .
move: 'AP interface' to   wf_listtext .
select single spld into usr01-spld from usr01 where bname eq sy-uname .
if sy-subrc eq 0 .
    move: usr01-spld to loc_dest .
endif .
call function 'GET_PRINT_PARAMETERS'
    EXPORTING
      destination    = loc_dest
      copies         = 1
      list_name      = wf_listname
      list_text      = wf_listtext
      immediately    = ' '
      release        = ' '
      new_list_id    = 'X'
      expiration     = 1
      line_size      = 200
      line_count     = 65
      layout         = 'X_65_200'
      sap_cover_page = 'X'
      receiver       = 'SAP*'
      department     = ''
      no_dialog      = 'X'
    IMPORTING
      out_parameters = wf_params
      valid          = wf_valid.
if wf_valid <> space.
    new-page print on parameters wf_params no dialog.
    perform write_summary .
    new-page print off.
endif .
endform.                    "send_report_to_spool
*&      Form write_summary
      text
--> p1        text
<-- p2        text
FORM write_summary .
data: begin of itab occurs 0,
      matnr type matnr,
      end of itab.
select matnr
       from mara
       into table itab
       up to 10 rows.
loop at itab.
write: / itab-matnr.
endloop.
ENDFORM.                    " write_summary
This will create spool in SP01.What data you want to put in Spool write it in form write_summary.I have done coding for testing purpose
After that use that spool for your purpose.
If Useful award point

How To Create the source data in the destination part of Shuttle in APEX?

Similar Messages

Maybe you are looking for