How to create transaction codes

hi,
i have a program written and i need to have a transaction code to that program so that i can type in command field...
can anyone just tell me the procedure to do this...
thx in advance,
regards,
aj.

Hi good
1. goto se93 transaction
2. give transaction code and
3.click create button to create
4.and enter the program name.
reward if it is helpful.
thanks,

Similar Messages

How to create transaction code for a Z-table

How to create transaction code for a Z-table?
Se93 --> then which radio button to be selected? and what is the program nam e to be given

Hi Sam,
Procedure to create a TCODE for ZTABLE:
Create a table maintainance/View for the Z* Table.
Once you create the view goto SE93>Select Parameter transaction and give the short desc.>
Give the transaction as SM30(Skip the first screen-optional)>Check all check boxes under GUI support>In the default values(grid)section first row give the VIEWNAME as you created initially and the second row UPDATE as X.
Se93 --> then which radio button to be selected
Select the parameter transaction as a radio button.
what is the program nam e to be given
no need to give any program name. Instead you have to give the transaction code name as SM30.
Pls mark the helpful answers.
Thanks
Eswar

How to create transaction code for maintenance view

hai friends,
i hope every thing goes good.
i have doubt, how to create transaction code for maintenance view. I created view for tranperant table and now i want to create transaction code for the view.
i tried and i donot know the screen number and program name and where can i give the view name.
if any one know please post in details.
thanks in advance.

Hi Elam,
You need to create a "Parameter Transaction".
What this means is that you will have a transaction (let's call it "ZMAINT") which calls "SM30" and passes in your table name.
Go to transaction SE93 and enter your new transaction code. Enter in the Tcode description and choose "Transaction with Parameters" (it shouldbe the last radio button).
Enter in the default transaction "SM30" and tick the "Skip Initial Screen" check box. Hit Enter.
Now scroll to the bottom of the screen and you will see a Table Control where you will need to enter in the values to the SM30 selection screen.
Because you hit ENTER, the program will have loaded in the Selection Screen parameters into it's memory. Hit the drop down for "Name of Screen Field" and select "VIEWNAME" and then enter in your Z Table in the "Value" column.
Now go to the next line and hit the drop down and select "UPDATE" in the "Name of Screen Field". Enter in a "X" in the value column.
Now save the transaction and there you have it.
Hope this helps.
Cheers,
Pat.
PS. Kindly assign Reward Points to the posts you find helpful.

How to create Transaction code for ABAP and execution by other user

Hi All,
Could someone please let me know how to create transaction code in detail for ABAP program. Step by step procedure expected. I would like to know how other user can execute the report using same transaction code which I have created.
More about authorization.
Thanks in advance.

Hello,
You can create transaction code from se80 as well.In object navigator,right click on your program name and create->transaction code.You can create transaction and select if it is only a report,a report with selection-screen depending on your requirement.You can run your report directly by entering the transaction code in the command field.
You can authorise the users who can use your transaction:
Authorisation objects are used to restrict certain transactions to users.Critical data must be protected from unauthorised users.For example,the head has access to certain data.But it cannot be accessed by his subordinate.For this we need to define roles.
Create an authorization object with transaction SU21.
An object usually consists of the ACTVT (activity) field and one other field,which specifies the data type to be protected.By ACTVT, we can decide if the data is accessible for change,display only etc.
Add authorization fields to the authorization object created.
Assign the authorization object to the transaction using SE93.
Attach the authorization object to the role using transaction PFCG.
If you want to assign roles,use transaction PFCG.Create a new role.In the AUTHORIZATIONS tab,you can get a self generated profile name and a profile text by clicking on the icon next to it.Then go to the "Change Authorization data" and choose an authorization template.Then you can choose to display/change/create an activity and after the selection,click on the red and white circle.The profile will now be created.
In the user tab,you can give the user details who can use this role.
Also check this link:
http://www.*********************/r3_security/r3_security_tips.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/52/6716a6439b11d1896f0000e8322d00/content.htm
Very helpful guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
Regards,
Beejal
**Reward if answer is helpful

How to create Transaction code for Table Maintanance generator.?

Hi,
I have created a Z Table. and I maintained the Table maintenance generator for the same. Now, my requirement is.. I have to create Transaction code for maintain and Display of this Z table.
Can someone help me how to create the transaction code for Maintain and Display of the table. I know that we have to create a Transaction code for 'SM30'. Can someone tell me the steps to do the same. When I goto SE93 and say CREATE transaction, I get 5 options, Which one to select and what are the details should I provide in the subsequent screens.
Thanks in advance.
Best Regards,
Paddu,

Hi,
     Check the below steps......
1. Go to Tcode u2018se93u2019.
2. Select ' Transaction with parameters'.
3. Then Transaction 'SM30' with click on skip initial screen
      VIEWNAME : XXX9tABLE NAME)
      UPDATE   : X
4. Maintain the Table maintenance generator
Authorization group : &NC&
Authorization object :
Function group : name(xxx)
Maintenance Screens :
Maintenance type : One step
Maint Screen No : Overview screen (2)
If still u have problem I will send u steps with Screen shot ...send me Yr id.
Regards,
Biswanath

How to Create Transaction code for a Report

Hi Gurus,
I created some reports and I wants those reports
should be placed in the SAP Menu(initial screen) not
in the User menu in the form of Transaction codes.
I would really appreciate if any one can please send the process to create transaction codes for the User reports/Report groups in R/3 and how to add those created Transaction codes to the SAP MENU.
Thanks in Advance
Danial

Try to insert it into the main menu if you must change S000 (there is a function module for everything)? Perhaps SAP protects their menu trees from foreign subnodes in SE43?
Also note that for report transactions you do not need to give the user transaction code start_report. If you do, then they could enter it directly and potentially start many other reports too. The system will call start_report for submitting the report internally without authorizations for it required (unless start_report is maintained in SE97).
Regarding DE, this also confuses me sometimes and I noticed that it generally indicates that I am doing something which has an implication for a SAP standard object. Try either hitting the enter button to see what the next screen is, or, choose original language in the previous screen, or, logon in sy-langu = DE and (remember the path if you dont speak German) change it, or, follow JCs advice to create your own menu.

How to create t-code for a table and how to create transaction variant???

Hi,
I have created a custom table zsark.
Now my requirement is : I have to create a transaction variant zsark_var for sm30 and table zsark. I have to disable the output of the first screen. I have to assign the transaction variant to the transaction code of table zsark.
Now,
1.     how to create transaction code to a table. Can any one give me the
                staps??
2.     how to create transaction variant for the above requirement???
Thanks & Regards,
Sarkar

Hi
1 Goto SE93 transaction
2 Choose 5th option Transaction with parameters
3 Give transaction : SM30, Check Skip Initial Screen Press Enter
4 Goto Bottom left corner, click F4 select viewname, on right hand side give table name
5 Press one more time F4, choose update , mark it X on right side.
6 save the transaction.
Thanks
sandeep
reward if helpful

How to create transactoin code for a predefined variant?

Hi, I have created one variant for a custom report.How to create transaction code for the report with that variant?

When you create the transaction in SE93 select the Program and selection screen(Report transaction) type not
the transaction with variant(Variant transaction)

Create transaction code for CJE0 report

Dear friend:
Who's know how to create transaction code for CJE0 report.

Hi,
Alternatively, you can try adding anew entry to your menu area in development (SE43N), creating a subnode, selecting the report as your option and provide the information. Do not forget to give your own transaction name. I'm quite sure, that in this case (if you will transport this together with the report), it should work.
Regards,
Eli
P.S. I know that program names changes when it's about a writer/painter report. Is it really the same thing with CJE0 reports?

How to create transaction for a maintenance view, Thank you.

How to create transaction for a maintenance view,
Thank you.
deniz...

Hi Deniz,
Go to se93.
Then create the new T.code.
Under that select parameter Transaction.
Then give the sm30 in the t.code in default values tab.
check the checkbox skip initial screen.
in classification tab.
click checkbox inherit gui attributes..
Now below..
In the default values..
select
viewname and give ur table name.
UPDATE= Xsave
view - table name ( Should be upper case
update X ( should be upper case).
http://www.sap-basis-abap.com/sapbs011.htm
Hope this helps you.
Regards,
Viveks

How to find Transaction code from Report/program name ?

Dear all,
How to find Transaction code if i know Report/program name ?

Hi,
In se 38 when u open ur program,in the application toolbar u have a button beside the where-used list button as display object list.on clicking this button,a window will be opened at the left most corner for repository browser,in this u can find any tranasctions,fileds,screens,dictionary structures defined for the program.
if any transaction is created for the program u can find it under the transaction folder.
revert back for further queries.
Regards,
Sravanthi

How to get Transaction code for SAP standard report painter in FI

Hi All -
Please let me know, How to get the transaction code for Standard SAP report painter / report writer in FI module.
These report painters are created thru GR51...
Thanks,
Kannan

Please refer to [Creating Transaction Code For Report Painter Reports|http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fdap-consulting.com%2Fyahoo_site_admin%2Fassets%2Fdocs%2FReport_Painter_Reports.47142031.pdf&ei=MiWYS5ilCYeOlAfn4pCGDQ&usg=AFQjCNEZ0YO6vJ97K24MbU_NI5ROTb5vJA&sig2=Ke-svnqddqrz8RMcTuEnaw].

How to create TAX CODE in Spro...urgent please...

Hi sap guru's
While doing MIRO/MIR7/MIRA(logistics invoice verification). my cleint is using different tax code. i want to creat new TAX code for my cleint..
can anybody tell me how to create TAX code in SPRO.
Thanks

Hi Sakti,
Transaction code to create Tax code is FTXP.
Path is
IMG--> Logistic General --> Tax on good movements --> India --> Basic Settings --> Determination of Excise Duty --> Condition Based Excise Determination --> Define Tax code for Purchasing Department
After creating tax code dont forget to assign with your counrty code for that path is
IMG--> Logistic General --> Tax on good movements --> India --> Basic Settings --> Determination of Excise Duty --> Condition Based Excise Determination --> Assign tax code to company code
Hope your query is solved
Regards
Vivek
-- Reward for the Effort !!

How to create Tx-Code ?

Hi Friends,
I want to know how to create Tx-Code for data browser screen of table? Like Ctrl + Shift + F10 then the screen with inputs will be coming after excecute(F8) the final entries will be displayed i want to know is there any way to create the Txcode for viewing the final entries of the table?
Thks

Hi,
we can create the transaction code using SE93.
these are the steps we follow:
1.go to se93.
2.give the name with z or y.
3.click on create .
4.give short text.
5.give the program name and if there is screen no give that screen no also and authorization group.
6.save in package.
then transaction code will generate.
Reward if it useful.
Thanks in advance.
Lakshmi.

How to create Bar code

Hi,
How to create Bar code?
Explain the steps.

Hi,
A barcode solution consists of the following:
- a barcode printer
- a barcode reader
- a mobile data collection application/program
A barcode label is a special symbology to represent human readable information such as a material number or batch number
in machine readable format.
There are different symbologies for different applications and different industries. Luckily, you need not worry to much about that as the logistics supply chain has mostly standardized on 3 of 9 and 128 barcode symbologies - which all barcode readers support and which SAP support natively in it's printing protocols.
You can print barcodes from SAP by modifying an existing output form.
Behind every output form is a print program that collects all the data and then pass it to the form. The form contains the layout as well as the font, line and paragraph formats. These forms are designed using SAPScript (a very easy but frustratingly simplistic form format language) or SmartForms that is more of a graphical form design tool.
Barcodes are nothing more than a font definition and is part of the style sheet associated with a particular SAPScript form. The most important aspect is to place a parameter in the line of the form that points to the data element that you want to represent as barcode on the form, i.e. material number. Next you need to set the font for that parameter value to one of the supported barcode symbologies.
The next part of the equation can be a bit tricky as you will need to get a printer to print that barcode font. Regular laser printers does not normally print barcode fonts, only specialized industrial printers that is specifically designed to support that protocol and that uses specialized label media and heat transfer (resin) ribbon to create the sharp image required for barcodes.
Not to fear though, there are two ways to get around this:
- You can have your IT department do some research -
most laser printers can accept a font cartridge/dimm chip (similar to computer memory), called a BarDIMM that will allow a laser printer to support the printing of barcodes.
- Secondly, you can buy software that you can upload in your SAP print Server that will convert the barcode symbology as an image that will print on a regular laser printer. I found that this option results in less sharper barcodes. This option is really if you need to convert a large quantity of printers (>10) to support barcodes.
- Thirdly, you can buy a third party software like Barcode.dll and install on your frontend PC connected to the laser printer.
Now you have a barcode printed - what next?
Well there are two options, depending on your business requirements:
- You can use an existing SAP transaction on a regular workstation and get a barcode wedge reader to hook up between the keyboard and the PC. These wedge readers comes in a wand or scanner format. There are even wireless wedge scanners available that allows you to roam a few yards from the workstation to scan a label. This approach is mostly used where you want to prevent human errors in typing in long material, batch or serial numbers in receiving or issuing of material. The problem is that it's just replacing the keyboard input and you are basically locked down in one location and have to bring all the material to that location to process.
- Another solution is to use SAPConsole transactions
or write your own ABAP Dialog programs that will fit onto a barcode enabled wireless handheld terminal and that will follow the business logic as executed on the shop floor.
These programs are highly complex exercises in industrial engineering and ergonomics because of the limited screen sizes and limited ability to accept keyboard input. The user is instructed step-by-step and only scan and push F-keys to interact with the SAP system. Scan, scan, beep, beep, enter - highly automated.
To Create a Bar code Prefix
1) Go to T-code - SPAD -> Full Administration -> Click on Device Type -> Double click the device for which you wish to create the print control -> Click on Print Control tab ->Click on change mode -> Click the plus sign to add a row or prefix say SBP99 (Prefix must start with SBP) -> save you changes , it will ask for request -> create request and save
2) Now when you go to SE73 if you enter SBP00 for you device it will add the newly created Prefix
http://www.servopack.de/Files/HB/ZPLcommands.pdf.
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/content.htm
Regards,
Padmam.

How to create transaction codes

Similar Messages

Maybe you are looking for