How to create user other than 'sa' to connect database server in SAP SBO

I want to ask how the step for create user other than 'sa' to connect database server in SAP SBO? Until now I use 'sa' (default) for connect to database server in SAP SBO application.
Can I do that?

You may create multiple SQL users to give full right to B1 database instead of using 'sa' user.
However, the preferred way would be by Use Trusted connection when you set the connection to SQL Server. In this way, you just need one more user for SQL.  A group of window users could use this SQL access to connect database server.
Thanks,
Gordon

Similar Messages

  • I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
    http://support.apple.com/kb/HT1365
    For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
    I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
    Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

  • How to create users with i18n characters in SunONE directory server?

    Was trying to create users and groups with i18n characters in SunONE directory server
    1. Started LDAP console using -l option
    2. Chaged the Locale to Japanese
    3. Entered few japanese character as username (meaning internationalization user name)
    4. However, I could not able to type the password using the "soft keyboard" that comes with Japanese Locale
    5. to overcome with #4, for now, I typed english chars as the password
    6. Click OK to save the above username/pwd
    7. It says "netscape.ldap.LDAPException: error result (19); value of attribute "uid" contains extended (8-bit) characters"
    Has anyone ever created i18n user names in SunONE Directory Provider? Please help...

    Hi LostLad,
    Soryy for my ignorance...Could you please be elaborate on how to remove "uid attribute from 7-bit ASCII plugin?
    Thanks in advance..

  • USERS OTHER THAN ORACLE DEFAULT USERS IN DATABASE

    Hi,
    I want to get users other than default oracle users.I used the below query still i get default users
    select username from dba_users where username < >'SYS' ;
    DIP
    MDDATA
    ORACLE_OCM
    SCOTT
    SYSMAN
    CTXSYS
    DBSNMP
    EXFSYS
    XDB
    SI_INFORMTN_SCHEMA
    ANONYMOUS
    DMSYS
    WMSYS
    ORDSYS
    OLAPSYS
    ORDPLUGINS
    MDSYS
    MGMT_VIEW
    SYSTEM
    OUTLN
    I want users that are created how to get that.
    Pls help me with the query.
    Thnx

      1* select username, created from dba_users order by 2
    SQL> /
    USERNAME                 CREATED
    SYSTEM                      15-AUG-09
    SYS                      15-AUG-09
    OUTLN                      15-AUG-09
    DIP                      15-AUG-09
    ORACLE_OCM                 15-AUG-09
    DBSNMP                      15-AUG-09
    APPQOSSYS                 15-AUG-09
    WMSYS                      15-AUG-09
    EXFSYS                      15-AUG-09
    CTXSYS                      15-AUG-09
    ANONYMOUS                 15-AUG-09
    USERNAME                 CREATED
    XDB                      15-AUG-09
    XS$NULL                  15-AUG-09
    MDSYS                      15-AUG-09
    ORDSYS                      15-AUG-09
    SI_INFORMTN_SCHEMA            15-AUG-09
    ORDDATA                  15-AUG-09
    ORDPLUGINS                 15-AUG-09
    OLAPSYS                  15-AUG-09
    MDDATA                      15-AUG-09
    SPATIAL_WFS_ADMIN_USR            15-AUG-09
    SPATIAL_CSW_ADMIN_USR            15-AUG-09
    USERNAME                 CREATED
    SYSMAN                      15-AUG-09
    MGMT_VIEW                 15-AUG-09
    APEX_030200                 15-AUG-09
    APEX_PUBLIC_USER            15-AUG-09
    FLOWS_FILES                 15-AUG-09
    OWBSYS                      15-AUG-09
    OWBSYS_AUDIT                 15-AUG-09
    SCOTT                      15-AUG-09
    IX                      07-MAY-10
    BI                      07-MAY-10
    SH                      07-MAY-10
    USERNAME                 CREATED
    HR                      07-MAY-10
    PM                      07-MAY-10
    OE                      07-MAY-10
    DBADMIN                  07-MAY-10
    BONGO                      22-MAY-10
    USER1                      30-AUG-10
    SAM                      29-SEP-10
    40 rows selected.
    SQL> SELECT USERNAME FROM DBA_USERS WHERE CREATED > TO_DATE('2009-09-09','YYYY-MM-DD');
    USERNAME
    USER1
    BONGO
    DBADMIN
    HR
    SAM
    OE
    SH
    PM
    BI
    IX
    10 rows selected.
    SQL> still confused?
    Handle:      newbie
    Status Level:      Newbie
    Registered:      Jul 1, 2010
    Total Posts:      57
    Total Questions:      44 (40 unresolved)
    so many questions & so few answers.
    Edited by: sb92075 on Oct 14, 2010 10:15 AM

  • CUIC 8.5 Unable to "choose collection" for users other than Admin/Superv

    Hi,
    When login with any user other than the admin, I'm not able get any entry in the "choose collection" drop down menu for any type of report. While investigating it seems this is restricted by the option Security / User Permissions / System Collections (UCCE). I can see how all the teams has assigned the admin user for read, exedcute and write. In addition also the supervisor of the team is added to the list and I have checked and confirmed that the supervisor can get the collection of his/her team.
    There is a list on the right hand side to be able to add additional user permissions however when I try I get the error "System Collections (UCCE) permissions can't be modified". Obviously having just the supervisor of the team being able to list their team is not good enoguh and I would expect changing the permissions here is possible.
    Has anyone come accross this problem or do you have any tips before openign a TAC case?
    Thanks
    Isidro

    I should also note something that I did that I think may be causing the default wiki and blog theme to not appear. In Server Admin, selecting Web, then going to Settings and on the Web Services tab, I changed the Data Store path to:
    /Library/WebServer/Documents
    I did this thinking it would create the html pages in the directory that the placeholder page was indicating that I should put my web page, but I think that is wrong, now. Does anyone know the default path for the data store?

  • How to create user defined button in alv report

    how to create user defined button in alv report
    thnks in advance.

    Hi,
    U can define it the the PF-STATUS ( Menu for ALV ).
    For that u have to define it in the EVENTCAT.
    form z_eventcat  using    p_i_eventcat type slis_t_event.
      data: i_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
        exporting
          i_list_type     = 0
        importing
          et_events       = p_i_eventcat
        exceptions
          list_type_wrong = 1
          others          = 2.
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
      clear i_event.
      read table p_i_eventcat with key name = slis_ev_top_of_page into
      i_event.
      if sy-subrc = 0.
        move 'TOP_OF_PAGE' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
      read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
      if sy-subrc = 0.
        move 'SET_PF_STATUS' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
      clear i_event.
      read table p_i_eventcat into i_event with key name = slis_ev_user_command .
      if sy-subrc = 0.
        move 'USER_COMMAND' to i_event-form.
        append i_event to p_i_eventcat.
      endif.
    And in the DISPLAY
    call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
         i_callback_program                = v_progname
         i_callback_pf_status_set          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         i_grid_title                      = v_gridtitle
         i_save                            = 'A'
         is_layout                         = i_layout
         it_fieldcat                       = i_fieldcat[]
         it_sort                           = i_sortinfo
         it_events                         = i_eventcat
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        tables
          t_outtab                          = it_final
       exceptions
         program_error                     = 1
         others                            = 2
      if sy-subrc <> 0.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      endif.
    *MENU SETTINGS.
    form set_pf_status using rt_extab type slis_t_extab.
      set pf-status 'ALV_MENU'.
    endform.                    "SET_PF_STATUS
    endform.                    " Z_EVENTCAT
    Now double click on ALV MENU nad u can create a button in the application bar.
    Regards,
    Pritha.

  • How to create user groups in SAP

    Hello Gurus,
    Can anyone let me know how to create user groups in SAP-HR Module and who will be creating  the user groups.
    plz provide me the steps.

    Hi Stephanie,
    IMG --> Personnel Mgmt --> Personnel Administration --> Basic Setting s --> Maintain User Parameters
    Please refer the below links:
    http://scn.sap.com/thread/1653026
    http://scn.sap.com/thread/1682721
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10eab7af-0e54-2c10-28a5-87b47adbe1a5?QuickLink=index&overridelayout=true&44478681629499
    Thanks,
    Madhav.

  • How to create User and Database in different Table spaces

    How to create User and Database in different Table spaces using oracle 10g
    Regards
    daya

    I am sorry but your question does not seem to make much sense.
    Can you please rephrase your question?

  • Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.

    Huge volume of records are routing to the remote user other than his position and organization records. Synchronization and DB initialization taking more time around 36 hours.
    Actual accounts & contacts need to be route around 2000 & 3000 but we have observed lakhs of records routing into local DB.
    We have verified all the Assignment Rules, Views.
    We ran docking object visibility rules and we have observed that some other accounts are routing due to Organization rule passing. (these records are not supposed to route).
    Version Siebel 7.7.2.12,
    OS Solaris.

    let me know what would be the reason that 1st million takes only 15 minuts and the time goes on increasing gradually with the increase of dataYes that's a little strange. I only can guess:
    1. You are in archivelog mode and the Archiver is not able to archive the redo logs fast enough
    2. You don't use Direct Load and DBWR ist not able to write the direty block to disk fast enough. You could create more DBWR processes in that case.
    3. Make a snapshot of v$system_event:
    create table begin as select * from v$system_event;After the import run
    create table end as select * from v$system_event;Now compare the values:
    select * from begin order by TIME_WAITED_MICRO descwith the values given you by
    select * from end order by TIME_WAITED_MICRO descSo you can look where your DB spent so much time waiting for something.
    Alternativly, you could start a 10046 trace on the loading session and use tkprof.
    Dim

  • How to create User Defined Variables in Procurement Contract 12.1.3

    Hi,
    We are using Procurement Contract 12.1.3. As per our business requirement while creating contract template we need to use many variables which are not available in 'System Defined' variable list. Please guide us with some samples (step by step) how to create the 'User defined' variables.
    Regards,
    Prabhu

    Hi Prabhu,
    Did you get the setps how to create user defined variables in Procurement contracts? if so please share me the setp by step flow.
    Prakash

  • How to create user defined transactioncode in bw

    hi,
    How to create user defined transactioncode in bw.My user want this
    regards,
    Abhishek

    hi 
    by using the t code SE93 u can create.
    after that it will ask u for what ur going create
    1.Program and screen
    2.Program and selection screen
    3.method of class
    4.transaction with variant
    5.transaction with parameter
    here u have to select appropriate option based on ur requirement
    and enter the options as per ur needs save and activate

  • How to create user defined functions in xi.

    how to create user defined functions in xi.
    can anyone give info with screen shots.

    Hi,
    Please follow the  steps mentioned in below link
    http://help.sap.com/saphelp_nw04/helpdata/en/f8/2857cbc374da48993c8eb7d3c8c87a/frameset.htm
    also refer below links to know more about UDF
    udf
    Thanks
    Swarup
    Edited by: Swarup Sawant on Mar 3, 2008 3:59 PM

  • How to create user defined metrics for SQL Server target?

    The customer is not able to create a user defined metrics for SQL Server target.
    This is very important for him to use this product.
    He is asking how to create user defined metrics?
    I sent him Note 304952.1 How to Create a User-Defined SQL Metric in EM 10g Grid Control
    But it would work for an Oracle DB, but his target is SQL Server DB
    Not able to find the "User-Defined Metrics" link from Database home page.
    How to create user defined metrics for SQL Server target?

    http://download-uk.oracle.com/docs/cd/B14099_19/manage.1012/b16241/Monitoring.htm

  • How to create user editable Crystal Report with dynamic dataset

    What I would like to achieve:
    A program loads a report in runtime updates list of database fields (possibly includes sample data), open report in "Crystal Reports 2011" (or 2008) where user customizes report and saves it. Later on the program loads the report, fills actualized data and displays it in .net report viewer.
    What I do:
    CrReport = New CrystalDecisions.CrystalReports.Engine.ReportDocument
    CrReport.Load(TemplateFilename)
    Dim Results As DataTable
    DataTable is filled from a database
    CrReport.SetDataSource(mResults)
    CrReport.SaveAs(NewReportPath, True)
    The NewReportPath is opened in the default program.
    What are the problems
    The report is open in preview mode (not in design).
    When the field is added to the report the designer asks for XML datasource on preview.

    The short answer is that it is not possible. I broke the question to other two: How to save a report that it opens without preview? and How to create user editable Crystal Report with dynamic dataset, where it is possible to find details. Key answer is Re: How to create an editable previewable report?

  • How to create User Exits in ECC 6

    Hi Experts,
    good day, i'm looking for any notes or learning materials on how to create User Exits in ECC 6. please send me the links.
    thanks you for your usual support.

    Hello,
    For information on Exits, check these links
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    Any Basics u wana know abt Enhancements.,.,go through the link.,
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
    Thanks,
    Swati

Maybe you are looking for

  • Bridge Searches and Keyword suggestions

    In Bridge CS3, changing the search target, eg from filename to keyword, dumps any search items already entered and replaces it with 'Enter Text'. This is seriously irritating if you have already entered the search string and have the wrong field sele

  • URL for reporting BUGS in iWeb. URL for reporting a WISH LIST for next iWeb

    1 Can someone please send the URL for the page in which one can report bugs in iWeb? 2 Same thing for simple old Wishes and Hopes for the next iWeb if they are not one and the same URL/page. Thank you. Lorna in Southern California

  • Wasn't given option to "upgrade" and lost user data

    I was trying to upgrade from 10.2.9 to 10.3 yesterday and during the install I didn't see an option to "upgrade" or save the data that was already on the computer (iMac G3). After the install I see that there are no users except the account I was ask

  • Printer Driver Problem?  Page margins shift when using paper tray vs. manual feed

    I am printing to an Apple LaserWriter 12/640 PS. The printed page and page margins are PERFECT (WYSIWYG; "What you see is what you get") when printing either to: (a) the MANUAL FEED TRAY of the Apple LaserWriter 12/640 PS; or (b) PDF to view on scree

  • Package not found javax.sql.*

    Hi I'm trying to import the following and compile. It prompts me package not found for javax.sql.* ? Any idea what is going wrong ? Thanks. import java.io.*; import java.sql.*; import java.util.*; import javax.sql.*; import javax.naming.*;