How to de-provisions user's resource when the user is disable ?

When a user is disable in OIM, I would like OIM to de-provisions all the user's resources.
Is it possible to do it and how to do it ?

Hi Deborah,
I have tried the following configuration, but i am unable to de-provision the resource for the user. The Delete User task is not getting called. Here are the steps that i have followed.
1) Created a Disable User task with conditional checked and Task Effect as Disable.
2) Added a adapter to it, and in the response tab added a new response COMPLETE (adapter will be returning COMPLETE) and given the status for the response as Cancelled.
3) In the Undo/Recovery tab, added the Delete User task.
4) In the Task to Object status mapping, given Revoked for Object status for the Cancelled status.
As per the OIM document the Undo tasks are triggered when the current process task status is Cancelled, but still i found that the undo task is not getting triggered. I have made both Disable and Delete User task as conditional. Also i have added the Delete User task under Undo/Recover tab of Create User task. Can you tell me why the Delete User task is not getting called. Here the user is also not getting deleted from OIM.
Also all the tasks in the resource object are showing the status as Cancelled.
I have created a simple Mobile Phone resource object and done all these steps. Can you tell what went wrong. If i directly deleted the user from Admin console the Delete User task is getting called and user is also getting deleted.

Similar Messages

How to preven JButton of generated actions when the user keep pressing down

How to preven JButton of generated actions when the user keep pressing down the key or the short cut
The code below to show the issue when the user keep pressing Alt+ O
We want to prevent the JButton from generating multi actions just one action only
A sample of code shows the behaviour which has to be prevented. Continue pressing "Alt +O" and you will see the standard ouptput will print time stamps
Please notice, I am NOT interested in Mouse press which has a solution by adding a threshold ( setMultiClickThreshhold(long threshhold) on the JButton as an attribute.
public class TestPanel extends JPanel
   private JButton btn;
   public TestPanel()
      btn = new JButton("Open");
      this.add(btn);
      registerCommand(new MyAction(), InputEvent.ALT_MASK,
            KeyEvent.VK_O, btn, btn.getText(), 0);
   public static void registerCommand(AbstractAction action,
         int mask,
         int shortCommand,
         JComponent component,
         String actionName,
         int mnemonicIndex)
      InputMap inputMap = component.getInputMap(JComponent.WHEN_IN_FOCUSED_WINDOW);
      KeyStroke knappKombination = KeyStroke.getKeyStroke(shortCommand, mask);
      if ((component instanceof AbstractButton)
            && mnemonicIndex >= 0
            && mnemonicIndex < actionName.length()
            && (shortCommand >= KeyEvent.VK_A && shortCommand <= KeyEvent.VK_Z))
         ((AbstractButton) component).setDisplayedMnemonicIndex(mnemonicIndex);
      if (inputMap != null)
         ActionMap actionMap = component.getActionMap();
         inputMap.put(knappKombination, actionName);
         if (actionMap != null)
            actionMap.put(actionName, action);
   public static class MyAction extends AbstractAction
      private static final long serialVersionUID = 1L;
      @Override
      public void actionPerformed(ActionEvent e)
         System.out.println(System.currentTimeMillis());
   public static void main(String... args)
      SwingUtilities.invokeLater(new Runnable()
         public void run()
            JFrame frame = new JFrame("Testing");
            JPanel panel = new TestPanel();
            frame.getContentPane().add(panel);
            frame.setPreferredSize(new Dimension(500, 500));
            frame.setMinimumSize(new Dimension(500, 500));
            frame.pack();
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            frame.setVisible(true);
}Edited by: user12130673 on 2013-feb-13 03:01

Use KeyStroke getKeyStroke(int keyCode, int modifiers, boolean onKeyRelease) with onKeyRelease=true instead?

How can I make a JButton enabled when the user types smthg in a JTextField?

Hello,
I have a JButton and a JTextField on a frame. The JButton is disabled, myButton.setEnabled(false).
How can I enable the button when the user types something in the text field? Just typing, not pressing enter.
Thank you

There isn't one, actually. What you need is a DocumentListener and you have to associate it with the document object associated with the field i.e.
field2.getDocument().addDocumentListener() (new DocumentListener() {
});

How to Setup User Folders Automatically when the user is being created

Hi All
I am setting up a new Windows Server 2012 R2 Standard Edition with Full/GUI install.
Q.1. Is there a way to create User Folders on Data Drive (D: Drive - OS is installed on C) automatically as I create Users?
Q.2. Additionally can these folders be assigned appropriate permissions automatically?
Q.3.What is the best approach If appropirate permissions are not assigned automatically. I have drive D: as a share with Full permissions to all. Is there a better way.
Thanks
Respectfully
Jamal

Hi,
Not sure you mean local computers or domain environment. In domain, we can create folder redirection GPO.
With this policy we can redirect folder to a shared folder or another local drive.
For your information:
Configuring Folder Redirection
http://technet.microsoft.com/library/cc786749.aspx
Security Recommendations for Folder Redirection
http://msdn.microsoft.com/en-us/library/cc736916(v=ws.10).aspx
Hope this helps.

How do I sign my VB / VS 2010 based shared COM add-in for Excel so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?

My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

How to clear text fields when the user navigates back to the screen

Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
Thanks

This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.containers.FormItem;
      import mx.controls.TextInput;
      import mx.events.IndexChangedEvent;
      import mx.core.Container;
      private function clearSreen(evt:IndexChangedEvent):void{
        var view:Container = tn.selectedChild as Container;
        for each(var child:Object in view.getChildren()){
          if(child is FormItem){
            var subchild:DisplayObject = child.getChildAt(0);
            if(subchild is TextInput){
              TextInput(subchild).text = "";
    ]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
    change="clearSreen(event)">
    <mx:Form id="frm1" label="View Number One">
      <mx:FormItem label="First name:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Last name:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
    <mx:Form id="frm2" label="View Number Two">
      <mx:FormItem label="Address1:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Address2:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="City:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="State:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Zip code:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

Error in sql server with a trigger (I want to display a customize message, when the user left a blank field or null) How can I do?

How I display a customize message(with a trigger)when a user left a blank field? I want to the stop the insert statament if the user left the status field in blank. I create a trigger but now I can't enter a row, i used an instead trigger
too but doesn't work. I want to display a customize message when the user left the
status field in blank or null.
I have the following code:
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
END

I agree with other comments that you should do this with specifying that the column is NOT NULL to prevent it from being NULL and a constraint if you don't want it to be blank (spaces or the empty string - note that the empty string is not the same thing
as NULL).
But for completeness, the reason your trigger does not ever allow you to enter a row is the code
IF (SELECT COUNT(*) FROM inserted WHERE Status IS NULL) =1
PRINT 'Please Fill the Status field is required'
Rollback;
Since you don't have a begin/end block after IF, the only conditionally executed statement is the one immediately following the IF (that is the PRINT). So the Rollback is always executed whether or not the IF is true and so all updates are rejected.
So if you were to do this in a trigger you could do something like the following
CREATE TRIGGER [dbo].[BLANKFIELD]
ON [dbo].[Status]
FOR INSERT
AS
BEGIN
IF EXISTS(SELECT * FROM inserted WHERE Status IS NULL)
BEGIN
PRINT 'Please Fill the Status field is required';
Rollback;
END
END
(As José noted, there can be more than one row in the inserted pseudo table, so you don't want to test whether the COUNT = 1, instead just whether one or more rows exist where the Status is null. If you want to prevent Status is NULL, or all
spaces, or the empty string, then your IF statement would be
IF EXISTS(SELECT * FROM inserted WHERE ISNULL(Status, '') = '')
Tom

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

How to make a text field required at run time when the user clicks the checkbox ?

I got a form where , there are several checkboxes and text fields associated with that checkboxes.If the use clicks on the check box then the associated
text fields should become required.I have tried the change event and the click event for the checkboxes.It gives error in the onChnage event and I got some weird results in the on click event .Sometimes if the user click the check box , then for the 1st time the field doesnt become required , then the user onclicks the check box and when the user clicks the checkbox for the second time the field becomes required,but if i deselects the highlighted field option and selects it again the field becomes required even if the user onchecks it I am totally confused !!! Adding to it i have also written the wrong code still i achieved the desired result ?? How it can be possible . I am writing the codes below , please help me as i am working under a deadline from the client.
onChange event :
var newVal = this.boundItem(xfa.event.newText);
if(newVal == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "disabled";
else
     xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.Purchasecost3_1" ).validate.nullTest = "error";
For the onClick event :
var a = xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovere d_OnlyEnergyCharges").rawValue;
//app.alert(a);
if(a == 0)
    xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "error";
if(a == 1)
      xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").validate.nullTest = "disabled";
   Please help someone !!!

I used the onchange event and wrote the code for it. I got the result . But there is a problem.All these fields are in a table and it's a dynamic table where you can add rows dynamically at the run time .I have other change event for some fields in this table .All are working fine when i add the row.But for this check box the required fields are not validated as required at the run time . I am here giving the code , Please help me .
form1.Subform0.Subform1.Subform9.Subform10.Table48.Row2.CostItemRecovered_OnlyEnergyCharge s::change - (JavaScript, client)
if(this.rawValue == "1")
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory= "error";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory= "error";
else
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L1_1").mandator = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row4.ComplianceCheck_ L2_1").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L1_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row5.ComplianceCheck_ L2_2").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L1_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row6.ComplianceCheck_ L2_3").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L1_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row7.ComplianceCheck_ L2_4").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L1_5").mandatory = "disabled";
xfa.resolveNode("form1.Subform0.Subform1.Subform9.Subform10.Table48.Row8.ComplianceCheck_ L2_5").mandatory = "disabled";

How can I control the windows behavior when the user hits "Windows key +d"?

Hi,
I have an application with 2 top-level windows. Both windows may be open at the same time. One window is a win32 window, and the other is a wpf window. When both windows are open, the wpf window should always be before the win32 window. When the user hits
"Windows key +d" twice (show desktop and restore all windows), the windows are occasionally restored in a different order.
How can I force the wpf window to always be before the win32 window?
Which Windows messages/events are sent when the desktop is restored?
Yoel

Hi,
I tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
I was able to get some win32 messages that change the win32 window position. I tried then to bring the Wpf window to the front (using SetActiveWindow, SetForegroundWindow, SetWindowPos) but i does not work as expected.
Yoel
Hi Yoelp,
>> tried set the Topmost property on the Wpf window. It didn't help - for some reason, the win32 window still get in front of the Wpf window.
It worked well on my side, could you please tell us more details about these two window? What have you done on the WIn32 Window? We need to know the reason
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Keep all the Portal report menu's are "open" when the user logs on?

Hi
I have a question about the BI Portalu2019s configuration. Does anyone know how to keep the Web Portal (i-vew) report menu's are "open" when the user logs on?
Thanks.
For example:
Web Report Panel
Report Folder A
              i-view a1
              i-view a2
              i-view a3
              i-view a4
              i-view a5
              i-view a6
Report Folder B
              i-view b1
              i-view b2
              i-view b3
              i-view b4
              i-view b5
              i-view b6

Hi,
Thank you very much. The problem is the Folder didn't 'open when the user logs on. Yes, the iview can be openned. Does anyone know how to set the default Open for the Folder. My question is about the folder in BI portal. Yes, the ivew we can set the defaul Open but we have Folder in the portal and our user wants to be able to see the report lists when they log on to the Portal.
For example:
Our Current situation
    Navigation Panel
   .>Act vs Plan report Folder_
   .>Year to Day report Folder_
Hope To Be (When user logs on the BI Portal)
   Navigation Panel
    .>Act vs. Plan report Folder
        (i-view) Report A
        (i-view) Report B
        (i-view) Report C
        (i-view) Report D
        (i-view) Report E
.>Year to Day report Folder
       (i-view) Budget by Cost Element report
       (i-view) Actual by Cost Center report
       (i-view) Income statement report
       (i-view) Balance Sheet report

How to catch an event when the user change values in the project information dialog

hi,
i would like to know how to catch an event in my C# code when the user change values in the project information dialog?
taskChange doesn't catch these changes.
thanks.
Thanks, Sharon.

You need to write save button event handler for project information dialog. Link is having same functionality described.
http://blogs.msdn.com/b/husainzgh/archive/2011/08/01/hooking-into-the-project-detail-page-ribbon-save-button-without-overriding-out-of-box-functionality-in-project-web-access-for-project-server-2010.aspx
http://www.projectserver2010blog.com/2010/01/sharepoint-2010-webpart-client-server.html
kirtesh

How can flex tell if it's a mouseup event when the user releases the mouse button outside the flex application?

how can flex tell if it's a mouseup event when the user
releases the mouse button outside the flex application? Say for
instance mousedown was done within a 500x500 embedded flex app but
mouseup is outside or relased on the HTML background. One more
thing, when we have something draggable, Flex doesn't execute the
stopDrag() when the user releases the mouse button outside the
embedded swf or fles app. Pls. help me with this. Thanks!

I don't think the flex app can tell what happens outside the
app. But it can detect when it leaves the app, so I have found the
following line works fine inside initApp():
this.stage.addEventListener(Event.MOUSE_LEAVE, yourFunction);
and you have to:
import flash.display.Stage;
Doug

How do I call a method when the user clicks on the delete button?

Hello , I need to implement the following :
If date from is less than sysdate , when the user clicks the "delete" button , he is shown an error message .
Can you please help how this can be done ? Thanks.

Thanks. What are the steps for adding a custom delete button ?
Are these ok ?
1 ) Add an adf button
2) Add the following in the actions listener : #{bindings.Delete.execute}
3) Right Click button --> create method binding for action
4) Compare date ?
Thanks.

How to de-provisions user's resource when the user is disable ?

Similar Messages

Maybe you are looking for