How to deal with multiple sessions?

My application has requirement that number of users can log simultaneously. They can search documents, browse the site, etc. Now the funtions they can perform depend on their user type. So to keep track of their userids and usertypes, do i need to create different sessions for each of them?
If yes, how do i tackle such a multiple session problem? ( Say if an user of type A clicks the search documents button, how do i know which session he belongs to?)
If no, what else can i use?

Hi,
You only need to maintain different user types and assign one or more types to your users. You can have another table that say what privileges each user type has. Then the first time the user logs in, you fetch this information and store it in your session. Then when the user tries to do something, all you do is get his user type and see if the user type has permissions to do that specific action. You then allow or disallow him from doing the action.
Hope this helps.
Cheers,
vidyut

Similar Messages

How to deal with multiple disk path's

hi
i'm setting up a new server with virtual servers with extra io domain's
now i have a question on how to deal with multiple disk path's
so following questions:
- can i enable multipath on the primary and on the alternate domain?
i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
- if i can't enable multipathing how to handle this
for example a disk has on the primary domain 4 path's to a disk
do i then assign all 4 path's to a virtual disk server or do i create a virtual disk server per path
if i do the first is adding all the path to the same mpgroup enough or not

Hello
1.-can i enable multipath on the primary and on the alternate domain? Yes. i understand for multipath mpxio or similar.
2.-i tried this but when rebooting the alternate the alternate keep's freezing and the only solution is to hard stop it and it's depending host
if you are going to use alternate domain you have to give this IO the all bus root nexus, what you describe sounds like DIO,
3.- - if i can't enable multipathing how to handle this for example a disk has on the primary domain 4 path's to a disk
If you have 4 path to the same disk in the primary and you are using multipath let's say mpxio, then you will have only one disk in the primary, which is a virtual device that handle the 4 paths. That's is what you have to use in a vds.
Please check this doc to see the best practice to ldom
white-paper-ldom
regards
eze

How to deal with multiple language SQL script?

Hi All,
We now want to create a SQL script that contains multiple languages(English, Chinese, Japanese), this script need to be run at there different database installed on different OS, for example, Oracle9i on Windows 2000 English Edition/Chinese Edition/Japanese Edition.
If I save the file as ANSI format, this file will only be recognized at local OS(e.g. the Chinese and Japanese character will not be normally displayed on other OS, if I run the script, the CH/JP characters will not be stored normally in DB).
If I save the file as Unicode format, this file can be recognized by all three OS, but Oracle SQL Plus will not recognize it, thus we can't run the script.
Who can tell me how to deal with this issue? Is it possible to save only one script that can run on different language OS?
Thanks,
Spark

Hi,
The ISQLplus supports multiple languages, but there will be following problems for my case:
1.ISQLplus don't support Unicode format script too, so I must save the file as ANSI format.
2.To display the characters normally depends on the database server's platform. I create a script contain three languages with ANSI format in Chinese OS, but if I want to load this script to database server installed on English OS via ISQLplus, the Chinese characters will not be displayed normally too.
PS:
So, I think this is not only related with Oracle but also the Windows OS, it is hard to create one file with ANSI format that can be displayed normally in different platforms.
Thank you all the same,
Spark

How to deal with user session when power goes off

Hi
All,
One day I had 170 oracle session connected on oracle database server and and suddenly electricity went off. but server was still running. and after power back on ther same bunch of user try to connect it.So I don't know what happen to those 170 session. does anybody know how to deal with this? I did shutdown and restart of database but I am not sure that is correct way to deal with this kind of situation.
Thanks,
Vishal

If the database server is still running, the sessions will remain there, but it depends on how they got connected to the server. If they got access through a middle tier which maintains the session and this MT is still running the sessions will still be visible from the database perspective, unless the MT handles the disconnection event.
If the sessions are working on a Client-Server basis, then PMON will mark the sessions as abruptly broken and it will get rid of them. Sessions may eventually remain hanged, but it depends on the topology, so the way you proceed was a clean database restart.
~ Madrid
http://hrivera99.blogspot.com

How to deal with multiple hard drives?

I am using Aperture 1.5 but am having trouble
dealing with the Library structure. I want to be able to have Aperture recognize and work with Projects located on several different external hard drives. Where should the main library be located? In 1.5 is there such a thing anymore as a Branch library? I had a branch library on an external drive. I may have messed things up so that Aperture doesn't quite know where things are. Is there a way to re-organize things so that when I open Aperture ALL the projects I've worked with do appear? Thanks.

To have Aperture work with projects on different hard drives, just import the project files but tell Aperture to copy the files from their current location (say a media card or CD) to a directory of your choice on any drive of your choice. You can store projects on multiple drives. I don't think it matters where the main library is located, it could be on your primary drive, or on one of your external hard drives. I'm not sure how to consolidate projects that were enclosed in different libraries other than to export the projects individually, and then reimport them into the new centralized library. I do wish Aperture would allow one multiple select projects (it only allows you to select one at a time) for exporting. I also wish that Aperture had a 'Consolidate Libraries' command which would allow one to just pull all 'found' projects into one library.
Dual 2.7 GHz 5.5 Gig RAM Mac OS X (10.4.6)

How to deal with multiple mail files?

Here's the story; it's sad but true: After a failed iSync spirited away all of my emails, the Apple Care techie I spoke to a month ago wasn't able to fully resolve the problem. So, currently in my Home Library folder I have 2 Mail files: #1 is labeled "Mail" and #2 is "Mail Copy."
"Mail" has one sub-folder called "Mailboxes" and four other folders for each of my four POP email accounts (there are also a number of other files that I'm ignoring for the moment like--Envelope Index, Signatures.plist, ect.). All mail from the past 4 weeks is in the folder labeled "Mail." But...
The other folder in my home library--"Mail Copy"--contains 3 POP email accounts and each one has sub-folders that contain mailboxes with my emails that go back many months. I want to keep the email in both folders, "Mail" and "Mail Copy."
Problem: How to get the older messages out of "Mail Copy" and back into the current "Mail" folder. Clearly, it would be a mistake to simple drag them from one location to the other, since the "Contents" files and ".plist" files wouldn't match.
I would be extremely grateful for any guidance the Mail authorities who contribute to this forum might be able to give.
Also, for the life of me, I cannot figure out where the emails actually reside. The "Mail" folder contains a subfolder entitled "Mailboxes" and it contains subfolders for each mailbox like "Action.mbox" and "Hold.mbox." Then, inside each .mbox folder are other files and usually one folder. Most of these files have names like "content_index," "Info.plist," "mbox," and "tableofcontents." And there is a folder labeled "Messages" and it contains numerous ".emix" files and one "tableofcontents file." My confusion begins when I open a particular POP account folder and find .mbox folders also located there and those folders also contain .emix files. I've searched the entire knowledge base, and I find no explanation anywhere of which files/folders are located where and why.
Many thanks for your time and trouble, Jay

The easiest way to combine the old folders with the new is to use the "Import" option in Mail's File menu. Consult the Mail Help topic "Importing email into Mail" for comprehensive instructions for doing that. In your case, the "archived" messages will be the ones in "Mail Copy."
The actual messages are stored in individual *.emlx files, inside each mailbox folder's "Messages" folder. (For instance, you would find a message in a locally stored, root level mailbox "Action" at path ~/Library/Mail/Mailboxes/Action.mbox/Messages/xxx.emlx, where "xxx" is a number.)
Some of the files you mention are leftovers from Mail 1.x & are not needed with Mail 2.x. They won't do any harm if left in place, but you can remove them if you wish. (I suggest making a backup of the entire ~/Library/Mail/ folder beforehand, in case something you need accidentally gets deleted.)
These files are not needed by Mail 2.x: "content_index," all "tableofcontents" files, & files named "mbox." All folders with names ending in ".mbox" are needed, since they contain the .emlx files. You may also find folders in ~/Library/Mail/Mailboxes/ with no ".mbox" extension pared with folders of the same name with the ".mbox" extension (like "Hold" & "Hold".mbox") -- do not delete any of these, as they contain "Messages" folders as well.

How to deal with multiple Android ressolutions with Flash- AIR games

Hi,
I have some Flash games that want to make run on different Android devices. How do we do so? I've seen that in one of my games, while I check "full screen" when exporting, the game area is not taking all the available space on the screen. I guess that's because the aspect ratio.
I've seen this nice tutorial to solve that problem on Flex apps/games: http://gregsramblings.com/2010/05/06/scaling-an-adobe-air-application-to-fit-multiple-reso lutions-and-netbooks/
Is there any similar solution for flash based games?
Thanks!

That article looks like it's geared towards desktop applications, and it makes sure the window never gets bigger than the original size.
You will read, any minute now, that a lot of people set the stage to not scale, and then use layout code to position the interface to look right, and will even take note of the DPI of the device to make sure that buttons are the right physical size. That's fine for typical utility apps, but if you have a detailed illustrated background, or any sort of fixed bitmap art, it may not be the right way to solve the problem.
The way I solve the problem is to not do any scaling at all, I leave that up to Flash, but I have spare content off the edges of the stage, that will be revealed on wider or taller screens.
The first time I used that approach I made the Flash stage be 480x320, and had extra content above and below the stage, to a total height of 360. That single file would exactly fit the iPhone screen and also the different aspect ratio iPad. On the iPad you would see the extra content.
That works fine if you layout for the widest device, and a have extra content for the less wide devices, but there is only one device less wide than the iPhone, the iPad. So now I have switched the technique to horizontal.
My stage is now 1024x768, and there is a lot of extra content off the left and right edges. I have enough there that it will still fill the screen on the widest device, which is the new Samsung Galaxy Nexus.

How to deal with multiple pages of smart forms

Hi everyone,
i have two pages in smartforms but whenever i show smart form through my program only first page is shown not the second one. i tried with next page attribute of both pages but no resolution.
thanks alot in advance

Which solution did you choose ?
(1) main window on the two pages
- The first page contains the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Begins with nodes to print on first page
- - Then a command node force end-of-page
- - Then some nodes and a table node that are to be printed on second page
(2) main window only on second page
- The first page do not contain the main window, and its next-page attribute is the second page
- The second contains the main windows, and its next-page attribute is itself
- The main windows
- - Some nodes and a table node that are to be printed on second page
Regards,
Raymond

How do i deal with multiple iPhoto libraries when migrating to Photos

how do i deal with multiple iPhoto libraries when migrating to Photos

I would merge them before the migration. Also, spend some time doing any batch changes of names and dates beforehand too.
iPhoto Library Manager has good merge and duplicate search facilities.
http://www.fatcatsoftware.com/iplm/

How to deal with session timeouts?

How to deal with session timeouts?
With our current configuration of using single signon, when the web session times out (currently 20 minutes of inactivity), the user loses anything they have entered on a service form. The use case is that a user starts filling out a form and gets interrupted, goes to lunch, etc, returns and spends time filling out the form (in the mean time the web session has timed out). When they try to submit the service they get re-logged in through SSO and they have lost all of their entries in the service. This creates some very unhappy users.
I'd like to know how long other customers set their web session timeouts to and if anyone has come up with ways of handling this situation - either through somehow re-establishing the session or through warnings to the user about how long they have to complete a form.

Hi,
The timeout period for HTTP sessions that are created in the corresponding Web application. After being inactive for the specified timeout, the HTTP sessions expire. The period is specified in minutes:
<!ELEMENT session-timeout (#PCDATA)>
You can only change the session timeout property in the applicationu2019s own deployment descriptors. This is not possible for the Global Web Descriptor.
following may help you:
[Additional Configuration Settings |http://help.sap.com/saphelp_erp2005vp/helpdata/en/a9/7a9602ad094b82a293f06d1cbe2c14/frameset.htm]
Regards,
Sahidur

How to deal with visession in IVI-C driver program ?

a ViSession is an identifier that corresponds to a session.
My instrument is a remote internet device . i can call VISA library to implement
communication between labwindows and my remote internet device.In this case , what is meaning of Visession
? It looks as if Visession does not have a relation to my IVI-C driver program.
if it has a relation to my driver, how to deal with the ViSession in IVI-C driver program?thank you

ViSession is necessary as part of a larger picture and fills an important role in good architecture. Intrument handles (stored as the ViSession type) are necessary for large projects, which may require commanding multiple instruments.
There is no function to call which can get or set a ViSession value, similar to the way other attributes are set with driver functions. The ViSession intrument handle is created and returned to the application when an instrument is initialized; it represents a connection with one particular instrument.
This allows users to have multiple instruments connected, which can be controlled programmatically with one application. Then, the application can quickly specify which instrument it would like to send a command, just by sending one instrument handle or another.
Yes, you could remove the ViSession as parameter in your functions, but it would cripple the big picture effectiveness of the driver. In place of the ViSession, you would have to send each function the Resource Name or Resource ID for the particular instrument as well as the Option String. So really, it is just more practical and better practice to use an instrument handle (stored as the ViSession type).
That being said, for certain functionality (adding two numbers), you absolutely do not need a ViSession instrument handle parameter. You will have to use your best judgement to determine where to include or exclude this parameter. I suggest using the ViSession instrument handle parameter with any function that communicates with an instrument.
Also, Ebalci is correct regarding the difference between ViSessions and channels. ViSessions are used to communicate with different instruments. To reference or read a specific channel from an instrument you will have to refer to the guidance in the manual for the instrument in question. There will likely be a command to select a specific channel when reading from the instrument. And for general guidance, I suggest reviewing another IVI driver, possibly for an instrument of the same class or type or maybe from the same family, if such a driver already exists.
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

How to deal with payment of vendor to us (credit notes I guess)

Normally I use F07 for outgoing payments, it's linked to vendors, but how to deal with incoming payments of vendors?
We got paid two invoices(credit notes I guess) and I want to put them under the right vendor, but how do I do it?
I can't use F07 I think because I need to use positive amounts (for normal purchase invoices) and can't use negative amounts in this transaction. F08 is for ingoing payment but that session is linked to customers I thought..not for vendors?
How to deal with this kind ot transactions? What transaction can I use the best for payments like this
(we got paid an amount , no invoices yet, but I know the vendor).

whith F-02 it is possible I noticed.

Howto deal with multiple source files having the same filename...?

Ahoi again.
I'm currently trying to make a package for the recent version of subversive for Eclipse Ganymede and I'm almost finished.
Some time ago the svn.connector components have been split from the official subversive distribution and have to be packed/packaged extra. And here is where my problem arises.
The svn.connector consists (among other things) of two files which are named the same:
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/features/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
http://www.polarion.org/projects/subversive/download/eclipse/2.0/update-site/plugins/org.polarion.eclipse.team.svn.connector_2.0.3.I20080814-1500.jar
At the moment makepkg downloads the first one, looks at its cache, and thinks that it already has the second file, too, because it has the same name. As a result, I can neither fetch both files nor use both of them in the build()-function...
Are there currently any mechanisms in makepkg to deal with multiple source files having the same name?
The only solution I see at the moment would be to only include the first file in the source array, install it in the build()-function and then manually download the second one via wget and install it after that (AKA Quick & Dirty).
But of course I would prefer a nicer solution to this problem if possible. ^^
TIA!
G_Syme

Allan wrote:I think you should file a bug report asking for a way to deal with this (but I'm not sure how to fix this at the moment...)
OK, I've filed a bug report and have also included a suggestion how to solve this problem.

How to Deal with M:M relationship

Can Someone suggest how to deal with M:M relationship in Siebel-OPA integration ( how will it work for retrieve session)

Hi Tanu,
are you using 0SRPO_D1 DSO ? If so, you will be having shopping cart Number and item in it.
you can build a report on this DSO/Cube and put a filter ( exclude) where shopping cart Nbr is blank. This gives you list of all PO's which uses shopping cart.
not sure if this is what you are looking.
Thanks
Kalyan

How to deal with multiple sessions?

Similar Messages

Maybe you are looking for