How to decalre a currency variable

Hi all,
how to declare a currency variable of length 23 and 5 decimal places . please help me

Hi,
You can define a data element of length 23 and decimals 5 and make use of it in the program.
we cannot declare directly in the program as p because the max length accepted by packed decimal(p) is 16.
data: var(23) type p decimals 5. ( not possible).
data: var type ztestcu. (possible).
reward if useful.
regards
hemanth

Similar Messages

How to decalre the variable.

HI all,
I have decalred a variable mard-LABST
Data: v_labst type mard-lasbst.
But when i check syntactical check it was showing syntactically wrong.
can any body please tell me how to decalre.

Hi all,
This is my code. can you please check in u r editors.
tables: mard.
Types: begin of ty_NTGEW,
        Matnr type matnr,
        labst type labst,
        lgort type LGORT_D,
      end of ty_NTGEW.
data: v_ntgew type standard table of ty_ntgew,
      wa_ntgew type ty_ntgew.
data: v_ntgew1 type standard table of ty_ntgew,
      wa_ntgew1 type ty_ntgew,
      v_open like wa_ntgew.
data: v_test type mard-labst.
Select MATNR
       labst
       lgort
From MARd up to 10 rows
Into corresponding fields of table V_NTGEW
where labst NE '0.000'.
loop at v_ntgew into wa_ntgew.
v_open = wa_ntgew.
move v_open-labst to v_test.
Replace all occurrences of '-' in v_test with ''.
Replace all occurrences of CL_ABAP_CHAR_UTILITIES=>CR_LF in V_test with ''.
write:/ v_test.
move v_test to v_open-labst.
write:/ v_open-labst.
endloop.

How to Decalre Global Variable in UDF

Hi All,
Can you please help me, how to declare a Global variable in UDF.
I am using SAP PI 7.0.
Regards,
Manian.

Hi manian,
Have a look this thread:
Global Variable - How to Set and Access
Carlos

How can i print currency symbol in smart form?

how can i print currency symbol in smart form?
i want to print the currency symbol with grant total based on the vendor currency.
pls hepl............

Hi,
think You can't print the symbols for currency like $ and Pound etc
see this doc if needed
A variable in SAPscript is called a symbol. There are the following types.
System symbol (e.g. the number of the current page)
Standard symbol (usable in any document)
Program symbol (value from the print program)
Text symbol (local variable)
The value of a symbol is text for using within SAPscript code and is represented by the symbol-name enclosed by ampersands. On seeing the tell-tale ampersands in SAPscript code, you sometimes need to figure out the symbol type.
goto any PAGEWINDOW's Text elements in Script (SE71)
from the Menu-> INSERT-> Symbols
you find all symbols here
System symbols
System symbols in a SAPscript form are comparable to system fields like SY-UZEIT in an ABAP program, and include these. The graphical editor offers three types of system symbol.
1. General system symbols
See the table TTSXY. PAGE is the most widely used. The list given in our BC460 training manuals is out of date.
2. SAPscript system symbols
See the dictionary structure SAPSCRIPT. SAPSCRIPT-FORMPAGES is the most widely used.
3. ABAP system symbols
For the ABAP system field SY-UNAME, say, the symbol is SYST-UNAME. http://SYST is the dictionary structure for ABAP system fields.
Sample code:
User: &SYST-UNAME&
Page &PAGE& of &SAPSCRIPT-FORMPAGES(C3)&
Standard symbols
Standard symbols are maintained centrally (in the table TTDTG via transaction SE75) for use in any document. Menu path:
Tools
Form Printout
Administration
Settings
Some standard symbols are SAP-standard and others are custom. Curiously, table TTDTG is cross-client although SAPscript forms are not.
The value of a standard symbol has to be defined for each language used. This gives a way to make a single SAPscript form multi-lingual.
We can take advantage to an extent of the central maintenance, though there is no guarantee that the available standard symbols will used in every appropriate context.
Standard symbols complicate searching a SAPscript form, since text like Charity registration 211581 may be hiding in a standard symbol.
Text symbols
A text symbol is declared and assigned to within the SAPscript code, and so obviously applies only to the current document. The command DEFINE is used, requiring /: in the tag column, as in the following examples.
/: DEFINE &COMP_NAME& = University of Warwick
/: DEFINE &WS_RATE& = &TAX_SUMM_C&
Reward points for useful Answers
Regards
Shiva Kumar

How do I use bin variable in package without asking a user?

hi,
I would like to write an SQL but I want to use bind variable in package as a static without asking user? Like below?
I would like to ask you, below there is a emp_id variable? Is this BIND variable?
DECLARE
bonus NUMBER(8,2);
emp_id NUMBER(6) := 100;
BEGIN
SELECT salary * 0.10 INTO bonus FROM employees
WHERE employee_id = emp_id;
END;
If not, like this SQL how can define a BIND variable as static inside a code? not asking a user?
db version. 9.2.0.8
regards and thanks

OracleADay wrote:
I would like to ask you, below there is a emp_id variable? Is this BIND variable?
DECLARE
bonus NUMBER(8,2);
emp_id NUMBER(6) := 100;
BEGIN
SELECT salary * 0.10 INTO bonus FROM employees
WHERE employee_id = emp_id;
END;
/In the query "SELECT salary * 0.10 INTO bonus FROM employees WHERE employee_id = emp_id" emp_id is turned into a bind variable because
if you are coding static SQL in PL/SQL then PL/SQL wil automatically use bind variables: please read http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14261/overview.htm#sthref145.
This can also be proved with SQL trace. The following code:
alter session set sql_trace=true;
declare
v number;
c number;
begin
select count(*) into c
from t
where x=v;
end;
show errors
alter session set sql_trace=false;generates following raw trace file section with 10G XE:
=====================
PARSING IN CURSOR #2 len=79 dep=0 uid=69 oct=47 lid=69 tim=33338762257 hv=2860574766 ad='3c10120c'
declare
v number;
c number;
begin
select count(*) into c
from t
where x=v;
end;
END OF STMT
PARSE #2:c=46800,e=329811,p=0,cr=9,cu=0,mis=1,r=0,dep=0,og=1,tim=33338762253
=====================
PARSING IN CURSOR #1 len=35 dep=1 uid=69 oct=3 lid=69 tim=33338788761 hv=3539261652 ad='3c10053c'
SELECT COUNT(*) FROM T WHERE X=:B1
END OF STMT
PARSE #1:c=0,e=216,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,tim=33338788755
=====================Edited by: P. Forstmann on 17 mai 2011 17:47
Edited by: P. Forstmann on 17 mai 2011 17:55

How can I use environment variables in a controller?

Hi all,
How can I use environment variables in a controller?
I want to pass a fully qualified directory and file name to FileInputStream and would like to do it by resolving an env variable, such as $APPLTMP.
Is there a method somewhere that would resolve this??
By the way,Did anyone used the class of "oracle.apps.fnd.cp.request.RemoteFile"?
The following is the code.
My EBS server is installed with 2 nodes(one for current,and other is for application and DB).I want to copy the current server's file to the application server's $APPLTMP directory. But the result of "mCtx.getEnvStore().getEnv("APPLTMP")" is current server's $APPLTMP directory.
Can anyone help me on this?
private String getURL()
throws IOException
File locC = null;
File remC = new File(mPath);
String lurl = null;
CpUtil lUtil = new CpUtil();
String exten;
Connection lConn = mCtx.getJDBCConnection();
ErrorStack lES = mCtx.getErrorStack();
LogFile lLF = mCtx.getLogFile();
String gwyuid = mCtx.getEnvStore().getEnv("GWYUID");
String tmpDir = mCtx.getEnvStore().getEnv("APPLTMP");
String twoTask = mCtx.getEnvStore().getEnv("TWO_TASK");
// create temp file
mLPath = lUtil.createTempFile("OF", exten, tmpDir);
lUtil.logTempFile(mLPath, mLNode, mCtx);
Thanks,
binghao

However within OAF on the application it doesn't.
what doesnt work, do you get errors or nothing ?XX_TOP is defined in adovars.env only. Anywhere else this has to go?
No, it is read from the adovars.env file only.Thanks
Tapash

How to use one Bex Variable for two purposes in one query?

Hi,
I want to prompt for a UOM in a query. Then I want to use that one UOM variable to do 2 tasks in the query:
1. Perform a UOM conversion on one restricted key figure (no filtering)
2. Filter in a second restricted key figure (no conversion)
How would I use a variable (or two?) to do this? I do not want to have 2 UOM prompts.
Thanks!
Gregg

Oh, it all seems so easy now! Hindsight 20-20...
Solution was to create a new input ready variable for Unit.
1. Restrict the key figures which need restricting using new variable
2. For conversions, in BI backend us T-code RSUOM and create new conversion type associated with new variable. Then for each key figure needing conversion, set the conversion parameter to use the new conversion type.
Between both 1 & 2 above, the same variable is used & thus prompted only once.
Solution works perfectly.... as it should. Hope this helps someone else!

How to use the bind variable in custom.pll

Hi,
How to use the bind variable in custom.pll.Its through error.
any one gem me.
very urgent.
M.Soundrapandian.

Hello,
Please, ask this kind of questions in the e-business forum.
Francois

How to set the header variables in weblogic

Hi,
We have a following set up in our environment.
We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
My Issue:
How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
Thanks
Ramesh P.

maybe you are looking for the routing options
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348

How do I make a variable path in AppleScript?

I'm mass distributing an application, and for the next update I want to add customization. My application currently make a folder in the "Documents" folder. The folder is called "MCL_CONFIG". What I need to do is make a unicode text file in "MCL_CONFIG". Since it's going to be used on many different computers the path to where I'm making the new file has to change depending on the user. How can I make a variable path to a non-directory? Here's the section of my code with the problem:
tell application "Finder"
    if folder MCLConfig exists then
    else
        display dialog "Welcome to Mc Launcher! You will only recieve this message once, unless you delete the MCL_CONFIG folder." buttons {"Ok"} default button 1
        make new folder at New_User with properties {name:"MCL_CONFIG"}
    end if
end tell
It's not shown but I set the variable MCLCONFIG to (path to documents folder from user domain) & "MCL_CONFIG" as text.
As a side note how do I make the code look like it does in applescript, here?

You can do something like:
set supportFolder to ((path to application support from user domain) as text)
set appName to "My Spiffy App"
set subFolder to "MCL_CONFIG"
tell application "Finder" -- add application support folders if needed
if not (exists folder (supportFolder & appName)) then
    make new folder at folder supportFolder with properties {name:appName}
    make new folder at result with properties {name:subFolder}
end if
end tell
Edit: it is recommended that the folder in Application Support be named with your application's bundle identifier, but most just use the application name.

How do I create a variable video delay of a live stream...

I have a live video feed from my webcam in my Flash Application. I have a second video window next to it that I want to place a variable delayed video of the live stream. Therefore, I need to save the video stream in memory/disk and create this variable delay, say 5-60 seconds. As well as, continue to capture the live stream. The camera I am using suppots H.264 encoding.
How do I create a variable length queue or buffer to hold the video stream coming into the flash application. Do I create a memory variable or write this to disk ? I have been looking over the ActionScript 3.0 documentation and I can not figure out how to code this either way ( as a memory variable or write to disk queue ).
I want to be able to change the delay, view the delay stream in slow motion and scrub through the delayed stream.
I would like to do this with out having to use Flash Media Server.
Thanks,
Bob

I am sure it is practically impossible to accomplish that on the client side. Although theoretically it is conceivable to use NetStream.appendBytes() but it requires an extremely complex implementation.
I suggest you look into FMS DVR capacities:
http://help.adobe.com/en_US/flashmediaserver/devguide/WS236AE81A-5319-4327-9E44-310A93CA09 C6Dev.html

How can I set a variable number of values in a SQL IN clause?

Hi,
How can I set a variable number of values in a SQL IN clause without having to change the text of the SQL statement each time?
I read the link http://radio.weblogs.com/0118231/2003/06/18.html. as steve wrote.
SELECT *
FROM EMP
WHERE ENAME IN (?)
But we need the steps not to create type in the system and would there be any other solution if we would like to use variable number of values in a SQL IN clause ?
We are using JDeveloper 10.1.3.2 with Oracle Database 10.1.3.2
Thanks
Raj

Hi,
can you please explain why the solution from steve is not the right solution for you.
regards
Peter

How can I access global variables in a loaded Applescript?

How can I access global variables in a loaded script, in Xcode, ApplescriptObjC? Basically, I have a global variable defined in my parent script using "property", and I need to modify objects connected to those variables inside of a loaded script.
Example:
Parent script:
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
end script
Loaded script:
on myAwesomeHandler_()
myTextField's setStringValue_("The new Xcode is so glitchy ugh")
//changes value of linked text field of parent script
end myAwesomeHandler_
The problem is, the variable is undefined in the Loaded script, and I need it to have the same value as the parent script, and I don't want to pass the variable through the Handler. Any ideas?

I think want you are looking to do will need to be done in two steps. Because myTextField needs to be a property for the ObjectiveC part of the code you cannot turn it into a global.
However if you make a temporary variable global assign the string to it in the handler then set myTextField off of it.
global myTextFieldGlobal
script AppDelegate
property myTextField : missing value
//linked to a text field object
tell myScript to myAwesomeHandler_()
myTextField's setStringValue_(myTextFieldGlobal)
end script
on myAwesomeHandler_()
set myTextFieldGlobal to "The new Xcode is so glitchy ugh"
//changes value of linked text field of parent script
end myAwesomeHandler_
I know you stated you did not want the handler to return a value but I have to ask why? Global's, imo, are not a good idea and really should be used as a last resort.
One other possibility is to pass a reference to the property to the handler. Not sure if that works in AS of if that would satisfy our requirement of not passing the variable through the handler
<edit>
Another though have you tried to define the property outside the script? That is
property myTextField : missing value
script AppDelegate
Not sure if that will work.
You might also want to have a look at Scope of Properties and Variables Declared in a Script Object

How to create a global variable in forms 6i

How to create a global variable in forms 6i

:GLOBAL.my_var := 15; Well, this statement is not correct! Global variables
stores a character string of up to 255 characters in
length. Thus, valid statement for Khurram example
is:
:GLOBAL.my_var := TO_CHAR(15);
or
:GLOBAL.my_var := '15';
But numeric values are implicitly converted by oracle so there's nothing in fact wrong with the statement...
:GLOBAL.my_var := 15;
;)

Script logic - how to use a selection variable within an allocation logic

Hi,
I want to implement a simple top-down distribution to distribute values from a yearly budget (Y20xx.TOTAL) to a quarter budget (Q20xx.Q1, ... Q20xx.Q4) using the actuals of the previous year as reference.
If we hard code the members it works fine:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=SBO; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
Of course, we want to make this dynamic, using the values inputted in the selection screen of the package: time, entity and category.
So if we start with write the following logic, it does not work anymore:
*RUNALLOCATION
*FACTOR=USING/TOTAL
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN); USING=<<<; TOTAL=<<<
*DIM TIME WHAT=%TIME_DIM%; WHERE=BAS(Q2009.TOTAL); USING=BAS(Q2008.TOTAL); TOTAL=<<<
*DIM CATEGORY WHAT=%CATEGORY_DIM%; WHERE=<<<; USING=ACTUAL; TOTAL=<<<
*ENDALLOCATION
So, how to use the selection variables in this allocation logic? %TIME%, %CATEGORY% also did not work ...
regards
Dries
solved it ...
Edited by: Dries Paesmans on Feb 22, 2009 8:31 PM

Hi Dries,
Looks like you solved this, but if I can just add a small point -- when you use syntax like this:
*DIM ACCOUNT WHAT=ACC_NOT_ASSIGNED; WHERE=BAS(FIN);
*DIM TIME WHAT=Y2009.TOTAL; WHERE=BAS(Q2009.TOTAL);
each time the logic runs, it will scan through the dimension from the FIN and Q2009.TOTAL members, one level at a time, until it reaches the base members (where calc = 'n'). This may happen very quickly, if the dimension has very few levels, but could take a bit of extra time if it's a particularly deep dimension. (By which I mean many levels of hierarchy -- not some 1970's Pink Floyd musical reference.)
You may speed things up by using a member property instead of the BAS(xyz). Flag all the base members using a specific property value, and that way the logic engine can pick up the complete list of members in the WHERE clause, in a single query.
*DIM Account What=ACC_NOT_ASSIGNED; Where=[FloydProperty]="DarkSideOfTheMoon"; ...
This adds some maitenance work in the dimension, which may be problematic if your admins are changing it regularly (and will cause problems if they forget to update this particular property).
I can't predict how much time this will save you (maybe not much at all), but anyway I figure you'd want to know exactly what work you're asking the system to perform.
Regards,
Tim

How to decalre a currency variable

Similar Messages

Maybe you are looking for