How to decrease the dynamic table data loading time

hi
i have problem with dynamic table.
when i execute the the table with passing a query , getting lot of time for loading the table data.( it takes 30sec for every 100 rows.)
pls help me how to overcome this problem.
thanks advance.

Yes, This is oracle application...
We can move into other tablespace as well. But concern is how to improve the alter table move command performance.
Is there any specific parameter apart from the nologging and parallel server..
If it is taking 8 hours , can some have experience that nologging will save how much time. or is there any risk in doing in production.
Regards

Similar Messages

How to find the Last modified date and time of a package

Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.C

Here is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'.

How to pass the internal table data to smartforms

Hi Gurus,
I have a problem in passing the internal table data to the smartforms. In the print program
I get the data into one internal table "LT_PRDLBL1". I am passing this internal table to the other in print program by calling the FM_NAME.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         = T_SSFCTRLOP
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
    OUTPUT_OPTIONS             = T_SSFCOMPOP
    USER_SETTINGS              = ' '
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    LT_PRDLBL                 = LT_PRDLBL1
EXCEPTIONS
   FORMATTING_ERROR           = 1
   INTERNAL_ERROR             = 2
   SEND_ERROR                 = 3
   USER_CANCELED              = 4
   OTHERS                     = 5
In the print program I had defined the internal tables like
Data: lt_prdlbl type standard table of zprdlbl.
Data: Begin of lt_prdlbl1 occurs 0.
        include structure zprdlbl.
Data: End of lt_prdlbl1.
How do I define the internal table in the smartform to get the values printed in the smartform?.
<REMOVED BY MODERATOR>
Thanks,
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 1:01 PM

Nehal,
Thanks for quick response.
In the smartform under the Form Interface->Tables tab
I had defined
LT_PRDLBL LIKE ZPRDLBL. If I define TYPE instead of LIKE I get the error message saying "FLAT TYPES may only be referenced using LIKE for table parameters".
In the main window I have created LOOP, in which I have ticked the internal table and
LT_PRDLBL INTO LT_PRDLBL. In the text node I am passing the values of this internal table
&LT_PRDLBL-XXXX&.
I am able to get the print but the data is not printing.
Please help me with this.
Thanks,

How to get the plsql table data into output cursor

Hi,
Could anybody please help me.
Below is an example of the scenario..
CREATE OR REPLACE PACKAGE chck IS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR);
TYPE get_rec is record (ename varchar2(20),
eno number(12));
TYPE t_recs IS TABLE OF get_rec INDEX BY BINARY_INTEGER;
emp_tab t_recs;
END chck;
CREATE OR REPLACE PACKAGE BODY chck AS
PROCEDURE getdata(dept_no IN VARCHAR2,oc_result_cursor OUT sys_REFCURSOR)
is
BEGIN
select ename, eno
bulk collect into emp_tab
from emp;
open oc_result_cursor for select * from table(emp_tab); -- I believe something is wrong here ....
END;
END chck;
the above package is giving me an error:
LINE/COL ERROR
10/29 PL/SQL: SQL Statement ignored
10/43 PL/SQL: ORA-22905: cannot access rows from a non-nested table
item
let me know what needs to be changed
Thanks
Manju

manjukn wrote:
once i get the data into a plsql table, how to get this plsql table data into the cursor?There is no such thing as a PL/SQL table - it is an array.
It is nothing at all like a table. It cannot be indexed, partitioned, cluster, etc. It does not exist in the SQL engine as an object that can be referenced. It resides in expensive PGA memory and needs to be copied (lock, stock and barrel) to the SQL engine as a bind variable.
It is an extremely primitive structure - and should never be confused as being just like a table.
Its use in SQL statements is also an exception to the rule. Sound and valid technical reasons need to justify why one want to push a PL/SQL array to the SQL engine to run SELECT 's against it.

How to decrease the OLAP/DB and Frontend time of query

Hi,
While I am excuiting the query, it takes time to dispaly the query output. Reason behind is it have the high OLAP/DB and Front end time.
Can anyone help me how to decrease the OLAP/DB and Front end time.
Regards,

Probably Existing Aggregates are not useful .. you can edit them based on below factors
You can also check ST03N - > BI Workload - > select Weekly/Monthly - >Choose All data tab - >dbl click on Infocube - > choose query - > check the DB time % > 30% and Aggregation ratio is > 10 % then create aggregates.
Now goto RSRT choose query - > Execute debug mode - > check 'Display Aggr found' and choose 'Display Stats' -> now you can check records selected Vs records transferred in % .. it should be > 10 % .. That means the query is fetching records from Aggrs which will also improve query performance!
Also check RSRT - Execute in Debug and choose display aggregates found.. If it found aggregates then the query is using/fetching data from aggr's
Edited by: Srinivas on Sep 14, 2010 3:40 PM

How to Pass the internal table data?

DearAll,
How to pass the Data of one internal table on a 1.html page to another html page for output, in BSP Application.
regards.

Hi ,
In the onInputProcessing event of the first page , write the following code...
call method NAVIGATION->SET_PARAMETER exporting
    name = 'it_filt_cur'
    value = it_filt_cur.
Here it_filt_cur is internal table.
          NAVIGATION->GOTO_PAGE('next.htm').
In the next page , you can make the internal table as auto in the attributes.
Since you have made the itab as auto transfer , you can directly access the itab in the initialization event of the next page if it is stateless.
Regards,
Laxman Nayak.
Message was edited by: Laxman Nayak

How to decrease the column length in working time (CATS) table

Hi all,
Can you please tell me how we can decrease the column length in CATS table in the portal. Is it something we can do in webdynpro or in the back end.
Thanks in advance.
RK Reddy

I was looking for something similar and ran across OSS Note 989453. I would recommend checking out this note to see if it helps. Apparently, there is a JAVA program error that makes the columns wider than they need to be.
We have not yet tried this so if you happen to use it, let me know how it works for you.
Mark Musser
County of Sacramento

How to get the latest Change date and time of a M.O. from View VIAUFKST

Hi All,
I want to get the latest date and time of a M.O. from view
VIAUFKST. I have written the query like this...
SELECT AUFNR
         AEDAT " Changed Date
         AEZEIT " Changed Time
    FROM VIAUFKST
    INTO TABLE I_VIAUFKST
   WHERE AEDAT >= W_LASTRUN_DATE
   ORDER BY AEDAT DESCENDING.
but its not giving me right results... Pls help me out on this or suggest me the right approach to achieve the same...As this is very critical issue...
Advance Thanks and Points Gauranteed...
Suresh

> SELECT AUFNR
>          AEDAT
>          AEZEIT
>     FROM VIAUFKST
>     INTO TABLE I_VIAUFKST
>    WHERE AEDAT >= W_LASTRUN_DATE.
>
>   IF NOT I_VIAUFKST[] IS INITIAL.
>    SORT I_VIAUFKST BY AEDAT AEZEIT DESCENDING.
>    READ TABLE I_VIAUFKST INDEX 1.
>   ENDIF.
>
> The above statement is giving me different results...
> such as...
>
> 1. 30/11/2005 19:20:11
> 2. 29/11/2005 22:10:09
> 3. 30/11/2005 20:56:09
> 4. 28/11/2005 23:10:09
>
> by using the above SORT statement i am getting the
> fourth record as the latest, where as it should give
> me the third record....
>
> Please advise,
> Suresh.
Hi Suresh,
The reason why you are getting this result is because the system is interpreting the DESCENDING only for AEZEIT not for both. Change it to
SORT I_VIAUFKST BY AEDAT DESCENDING AEZEIT DESCENDING

How to pass the Dynamically table name and RELID in IMPORT x TO y FROM DATABASE dbtab(ar) ID Key

Hello Expert,
I wanted to know is there any way through which we can dynamically pass the table name in IMPORT condition.
For e.g.
DATA : PCLT TYPE DD03L-TABNAME.
DATA: SET_RELID TYPE T52RELID-RELID.
DATA: key TYPE PCLKEY.
DATA: text_version TYPE PVRSN.
DATA: BEGIN OF ptext OCCURS 132.
DATA: line(132).
DATA: END OF ptext.
SET_RELID = 'TX'.
PCLT = 'PCL1'.
KEY = '00001000004005     9999123119960101000'.
TEXT_VERSION = '01'.
IMPORT TEXT_VERSION PTEXT FROM DATABASE <PCLT>(<SET_RELID>) ID KEY.
If i use this then it gives me error message "The Dictionary structure or table "<PCLT>" is either not active or does not exist."
Kindly help me in this matter.
Thanks
Srikanth

Hi Srikanth
I dont know if there is another solution, but this is what i did using a dynamic subroutine, please check it
just add this lines to your code
DATA: prog TYPE c LENGTH 8,
       mess TYPE string,
       sid TYPE string,
       wrd TYPE string,
       dir TYPE trdir,
       OFF(3).
DATA: lt_code TYPE TABLE OF rssource-line.
DATA: ls_code TYPE rssource-line.
perform call_import using pclt set_relid key.
form call_import USING p_pclt p_set_relid p_key.
   ls_code = 'PROGRAM SUBPOOL.'.
   append ls_code to lt_code.
   ls_code = 'form get_text tables ptext using p_key changing text_version.'.
   append ls_code to lt_code.
   ls_code = 'IMPORT text_version ptext from database'.
   append ls_code to lt_code.
   concatenate p_pclt '(' p_set_relid ')' into ls_code.
   append ls_code to lt_code.
   ls_code = 'id p_key.'.
   append ls_code to lt_code.
   ls_code = 'endform.'.
   append ls_code to lt_code.
   generate subroutine pool lt_code
                       name prog
                       message mess
                       SHORTDUMP-ID sid
                       WORD WRD
                       OFFSET OFF.
   IF SY-SUBRC EQ 0.
     perform GET_TEXT IN PROGRAM (prog) tables ptext
                                          USING p_key
                                          CHANGING text_version .
   ENDIF.
endform.
Hope this help
Regards
MC

Viewing the Result Table Data?

Hello,
Please let me know the steps how to see the result table data after running the Remuneration Statement or before running the Remuneration Statement.

Hi,
Payroll result will be available after running the payroll in live mode.
then go to pc_payresult, or PC00_m40_clstr, eneter the personnel number for whom you want to see the result and then select the period.
Regards
Devi

Analyse big data in Excel? Why the dynamic tables doesn't take all the data from the source table.

Hi,
I'm doing a internship in a production line.
My job is to recover production data (input data) and test data (output data) using various types of software (excel, BusinessObject sap, etc).
To this day, I have recovered hundreds of production data, and have also organized in excel but I need to analyze and plot them.
I would like to know who can give me an idea of how I could plot as much data and analysis.
Now i trying to use dynamic charts and plot some data but I did not get acceptable answers.
How could I compare, analyze and graph for example:
Five columns of production (input) with five (5) columns tested (data output).
After graphing.
Someone can give me a technique to analyze data? ie I compare column by column?
or some other technique? as a conglomerate could analyze data?
o give you an idea of the contect, now I perform an internship in a manufacturing turbines.
My job is to analyze the input data (production) and to estimate the possible behavior of the turbines in the tests.
As I said, use dynamic tables in excel, but i have not idea why the dynamic tables doesn't take all the data from the source table.
I appreciate your advice
Thanks

You can declare as PT source whole Columns [$A:$E], without rows number.
Then You'll have all actually data.
Oskar Shon, Office System MVP - www.VBATools.pl
if Helpful; Answer when a problem solved

Transaction data can be loaded into the Fact table without loading the

Transaction data can be loaded into the Fact table without loading the corresponding master data (Example : Sales analysis transaction data can be loaded without populating any of its dimensions master data)
a. True
b. False

Hi Kutti,
True - You need to select the option in the infopackage - alwyas load even if no master data exists.
Bye
Dinesh

How to populate a dynamic table according to the choice of the viewer

Hi there,
I ran into a dead-end on my "Events" page.
There is a dynamic table getting the info from a database. It will initially show the Upcoming Events.
At this point my question is this:
*Can I populate the dynamic table based on a condition where the current date and the event date (as in the db) will be compared and if the event date is later than the current date, it will be displayed in the table. Otherwise, it won't.
If I can do that, can someone please help me out with the code?
Besides that, on the right side of the page there are 3 options for the viewer:
1. View upcoming events
2. View past events
3. Search events by month and year
What I want to do is that when the viewer clicks on 'past events', the table will be reset and populated with those events whose date has passed.
When the viewer clicks on "upcoming events", the table is reset again and populated with the relevant events.
When the viewer selects a month and a year, search the database to find the relevant records.
Can all of this be written in php? Since I read smwhere that php doesn't work with onclick functions... i got confused. Cuz the data in my table will have to vary depending on what the viewer is clicking (upcoming events/past events/search events). I do not wish to create separate pages for each type of event.
If anybody has a better suggestion to carry out this task, please share!
Thanks!

>Can I populate the dynamic table based on a condition where the current date and the event date (as in the db)
>will be compared and if the event date is later than the current date, it will be displayed in the table. Otherwise, it won't.
Of course. You just need to compare the date field in your database with the current date as returned by your DBMS date function. Assuming you are using MySQL, you would compare your column with the currdate() function and use the appropriate greater than/ less than operators in the SQL WHERE clause. If you don't know what a WHERE clause is then I would urge you to learn SQL as soon as possible. You can't build data driven sites without a basic understanding of SQL.
>Since I read smwhere that php doesn't work with onclick functions..
What this means is that php is a server side language, where user interactions always occur at the client site. But that does not mean you can't invoke a server side action from a client side event. You most certainly can and would.
You might consider adding links to the dynamic table page that pass a querystring to the php script which determine what filter to add in the WHERE clause- greater than the current date, less than, etc.
Also, in the future, please post these questions to the application development forum.

How to download the Dynamic data into PPT format

Hi Friends,
I have one doubt on WDJ. How to download the Dynamic data into PPT format. For Example Some Dynamic data is available in to View in that One Download Link or button available. Click on Download link or button download that data into PPT Format
Is it possible for WDJ. If possible please tell me.
Or
How to create Business Graphics in Web Dynpro Applications depening up on Excel Data and finally we can download the Business Graphics into powerpoint presentation.
Thank you,
Regards
Vijay Kalluri
Edited by: KalluriVijay on Mar 11, 2011 6:34 AM

Hi Govindu,
1. I have one doubt on WDJ. Click on either Submit Buttion or LinkToURL UI we can download the file that file having ppt formate(Text.PPT).
I am using NWDS Version: 7.0.09 and Java Version: JDK 1.6
2. is it possible to download the business Graphics in to the PPT by using Java DynPro
Regards
VijayK

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

How to decrease the dynamic table data loading time

Similar Messages

Maybe you are looking for