How to delete a Customer in its SALES AREA?

Hi All,
I've deleted a Customer by t.code OBR2. But it exists again in its SALES AREA.
Could anyone tell me how to delete it in the sales area too?
Thanks

Hi Gandalf,
not possible.
Note 725857 provides some reference coding for your own program.
Regards,
Joosz

Similar Messages

  • How to delete a customer in R/3 beside vd06?

    Hi
      how to delete a customer in R/3 besides vd06.
      vd06 marks it for deletion though i can create a
       sales order with a warning.
    Regards,
    Abhimanyu.L

    Hi
    The only way is to archive the customer. If the requirement is to prevent the customer from being used then try VD05 and block the customer.Another alternative is to write code in the user exit mv45afzb and check if the customer is marked for deletion then give an error message
    Reward if this helps
    Thanks

  • NAV 2013 R2; How to run a customized report (206 sales invoice) in the classic client

    Hello, in preparing a newly installed NAV 2013 R2, I'm questioning the following:
    In the Development Environment I have customized report 206 Sales - Invoice in the Design menu View Layout with the space of the logo (by Microsoft SQL Server Report Builder) and
    finally saved and compiled.
    When I do run it connects to the server of what I call the classic client or the real NAV 2013 R2 and I can select a posted sales invoice to show the new layout and the result is
    fine as customized as I wanted.
    When I later ordinary print one of the posted sales invoices this customized logo layout doesn't appear on the print. I print in PDF and paper. When I make a next new sales invoice
    this new layout is not in use either.
    Another thing is run print started from the Development Environment is called Sales - Invoice in the header and not just Invoice that it the name when printing when invoicing and
    printing of posted documents.
    Additionally this form of Sales - Invoice shows our company details and good information as web, e-mail, bank account and bank name that is well demanded on a perfect invoice.
    How to get these informations out normally?
    Is the classic client having a wrong report as sales invoice?
    How to run a customized report (206 sales invoice) in the classic client NAV 2013 R2?
    It is like the customized report (206 sales invoice) is not in use yet in the classic client.
    All you wise people out there are welcomed to help me now
    Best regards
    Carsten

    Try on Dynamics Community forum: https://community.dynamics.com/nav/f/34.aspx

  • How to delete a custom format in Numbers 3

    I am one of the poor unfortunates that has upgraded to Numbers 3 BIG mistake!!
    However does anyone know how to delete a custom format in Numbers 3?
    I'm not sure where the custom format came from in the erlier version of numbers. I guess I must have created it for something, I can't remember what.
    It now appaers that when I send a Numbers 3 document via email to an Excel format  it adds a weird custom format that turns currency into garbage. Once in Excel simply going to format cells and deleting this odd format cures the problem.
    If I could find a way of deleting it in Numbers 3, hopefully the problem will go away.
    This is far from the only problem I'm having with Numbers 3. It's begining to look like I'll have to abandon Numbers 3 having had to go to the expense of buying a new iPad because Numbers 3 documents (and presumably Pages Keynote etc) no longer work on the original iPad.

    I never promote the method the deletion unless you understand the underlying tables of planning, if you search on the forum you will see posts on the subject just like this one - Delete dimension from planning application
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to delete a custom dimension in planning - 9.3.1

    Hi
    some one please let me know how to delete a custom dimension in planning
    Thanks

    I never promote the method the deletion unless you understand the underlying tables of planning, if you search on the forum you will see posts on the subject just like this one - Delete dimension from planning application
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How can i extend the customer  to other  sales area

    how can i extend the customer  to other  sales area

    Hello Harish,
      Once you have a customer (eg. 100002) in one sales area (eg. 0010/10/10), you open XD01 tcode, enter the same  customer number (100002) in customer field and enter sales area (say u want to create in 0020/10/10) in which you want to create the same customer. Now in Reference section, enter the customer number (100002) and sales area in which already the customer exists (0010/10/10). When you press enter, it allows you to modify the sales area data for the customer for new sales area.
    then save it.
    Hope it is clear...

  • How to validate sales doc with its sales area

    Hi experts,
    how can i check perticular sales doc is extended to its sales area.
    i need to do validation for sales doc against  sales area.
    which table do i need to use for this,
    Thanks,
    Neo

    You can use VBAk Table
    Thanks
    Seshu

  • How to find a materail based on Sales Area ??

    Dear All,
    How to find a materail based on Sales Area ??
    please let me know ..
    Thanks
    Venkat

    Hi Venkat
    Its actually the other way round- you extend a material to a sales area
    The quickest way to find all the sales areas to which a material is extended,  is to go to  transaction SE16 and give table MVKE and then give the relevant parameters.
    Please reward points if this helps you

  • Problem in creating customer in new sales area

    Hi
    I am creating a customer in new sales area but system is not allowing but giving following message Sales area UKA1 U1 U1 is not defined for customers.
    In IMG, sales area UKA1 U1 U1 exists.
    How to resolve this problem?
    Thanks

    Dear Uttam,
    There are two ways to maintain Customer Master records:
    1. By creating master record for each Sales Area
    2. BY creating single master record & define common Distribution channels & Divisions.
    In second case e.g. you have two distribution channel & Divisions C1 & C2 and AA & BB respectively. You create a master record for C1 & AA & if you have defined the above Sales areas as common then you need create new master record for C2 & BB...
    These settings can be done at IMG - Sales & Dist - Master Data - Define Common Dist. Channel & Divisions.
    Hope this clears your doubt.. .
    Reward if useful...
    Thanks,
    Jignesh Mehta
    Mumbai
    98700 10230

  • Extend material and customer to other sales areas

    can u please let me know?
    How to extend material and customer to other sales areas? To extend material one plant to another plant what are the configuration you done in your project?

    <b>To Extend Customer master: T.code - XD01:</b>
    In XD01, enter Account Group, Customer Code, Company Code, Sales Organization, Distribution Channel & Divission. Also ensure to maintain reference Customer, reference Company Code, reference Sales Organization, reference Distribution Channel & reference Division --> Enter. Most of the fields will be copied by default, but some fields will not be copied & they have to be maintained in the same manner how we create a new customer.
    <b>To Extend Material Master: T.Code - MM01:</b>
    In MM01, Enter the Material Code & reference Material Code --> Enter.
    Select the Tab pages to be maintained & go to organization data & maintain the details like Delivering Plant & Reference plant, Storage location & reference storage location, Sales Organization & reference Sales Organization, Distribution Channel & reference Distribution channel & so on ...  --> Enter. Most of the fields will be copied by default, but some fields will not be copied & they have to be maintained in the same manner how we create a new material.
    Regards,
    Rajesh Banka
    reward point if helpful.

  • Error while posting Customer with Multiple sales areas using DEBMAS05.

    Dear experts,
    We are generating IDOCS vis SAP DS for posting Customer master. The message type used is DEBMAS and basic type is DEBMAS05.  we have a requirement to create 1 customer with multiple sales areas. However, we are ending up with a strange error:  "Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1". Despite the IDOC going into status 51, the customer gets created and the 1st sales area too. the 2nd sales area however is not created!  The IDOC data definitely contains Name1, otherwise the customer would not have been created in the first place.
    As the error message is related to the Address data, I also explored upon exploring this erorr further on the lines of Central Address management where in the ADRMAS and DEBMAS have to be passed together(IDOC Serialiization).  OSS Note (384462)  provides further details about this. One Important point from the note is: 
    "As you have to specify the logical name of the sending system among other things, SAP is not able to make any default settings in the standard systems. When you use the serialization groups delivered as a standard by SAP, the address objects are imported before the master objects.Thus the sequence address data before master objects must only be adhered to if one of the following points applies to your application:
    Such fields are set as required entry fields that are only provided by the BAS in the Customizing of the customer or vendor master.
    For your customers, contact persons exist to which a private address or a different business address is assigned.".
    This is not the case in our situation, as we do not have required entry fields in customizing that are only provided by the BAS, so the error is all the more confusing and I am not too sure what the cause is.
    If someone have experienced the same issue before and have found a solution to it, kindly help out.

    I have found the cause and solution to this problem.
    This error ”Fill all required fields SAPMF02D 0111 ADDR1_DATA-NAME1” and other similar errors like “Fill all required fields SAPMF02D 0111 ADDR1_DATA-SORT1“ which occurrs during the IDOC posting when there are more than one sales area or company code occurs when the customer number range is set up for Internal numbering. This means, that the number gets generated only at the time of save and upon debugging the IDOC, we found out that after creating the customer and the first sales area/company code record, the segment E1KNA1M is cleared completely! This is the reason, it throws an error which points to a mandatory KNA1 field as missing. (Like NAME1, SORT1 etc.)
    This was resolved by splitting the IDOC into 2.
    The solution is to First post only the KNA1 segment and create the customer.
    In the second step, pass the IDOC with all other segments along with E1KNA1M, but pass only KUNNR in E1KNA1M and the rest of the fields in E1KNA1M as “/”:  you would have got the KUNNR after the first step.
    Important note: This requirement to split the IDOCs does not occur when the customer number is known upfront. (Meaning cases where the customer number is externally generated) I also tested this and created a customer with external numbering and I was able to post more than 1 sales area with the same IDOC. 
    I noticed multiple threads with the same issue, but none of it had a concrete answer. I hope this information will be useful for anyone facing similar problems.
    Cheers
    Venkat

  • How to delete the messages from SXMB_MONI which are already cancelled .

    Hi All,
    The messages were earlier in System error(Red flag) state so i cancelled it manually.
    I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
    if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
    can any tell me the procedure of doing it.
    thanks
    Sai.

    Hi AmitSri,
    Thanks for u r reply,
    What is retention period, where can i find this option.
    And i don't have authorizations to sxmb_adm --> configure delete procedure
                                                                             --> Define interfaces for archiving and retention period.
    and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
    Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
    Thanks
    Sai.
    Edited by: sai_SHA on Aug 17, 2011 12:29 AM

  • Table name to find customer and which sales area he belongs to?

    Table name to find customer and which sales area he belongs to?

    Hi suchita,
    You can find these information Sales area he belongs and all in the table of  KNVV , take the customer number from customer master  KNA1-KUNNR  put it in KNVV-KUNNR. you can find all the  sales details.
    if you need more info send breaf requirement.
    if helpful award the points
    Regards
    Ram

  • I see how to delete songs from iPad, but there are some that won't give me the option to delete when I swipe it. Why won't it let me?

    I see how to delete songs from iPad, but there are some songs that don't give me the option to delete when I swipe them. Why can't I get rid of these songs?

    Do they have a cloud icon next to them? If they do, they aren't on the iPad so you can't delete them. They are in iCloud ready for you to download them if you want to and they are visible in the music app for this purpose.
    If you don't want to see these songs that are in iCloud, go to Settings> iTunes & App Store>Show all>Music>Off.

  • How to delete a customer complete from R/3

    Hi
        How can i delete a customer from R/3 complete.
        VD06 transaction only marks for deletion.
        I am able to create sales order after marking
        customer for deletion.
        I want to remove customer completely from the System
    Regards,
    Abhimanyu.L

    Hi
    You can delete a customer from database only if:
    - it runs archiving tools (for customer): here all customer setted to be deleted will be delete from database really;
    - it runs report SAPF019 (it's better to set the checkbox "Delete per deletion flag only"), I've never run it.
    Max

Maybe you are looking for