How to Delete IDOC

Hi
can you tell me how to delete idocs from R/3 system
Regards
Nawa

hi,
1st way:-
IDOC Related programs
1. Archive RSEXARCA and RSEXARCB
2. Delete RSEXARCD
3. Read archiveRSEXARCR
4. Restore RSEXARCL
2nd way:-
use FM EDI_DOCUMENT_DELETE .
pass the IDoc Number to it and delete the one which you want.
3rd way:-
use the tcode WE11 or program RSETESTD to delete an IDOC
but iDocs don't actually get deleted, just flagged with a deleted status (68). Transaction BD87 can do it, it does depend though on the existing Status of the iDoc though.
Thanks,
Vijaya

Similar Messages

In 4.6C, How to delete IDoc stuck?

Hi, experts
after I load more than 20000000 records data from R/3 side, I found out there are too many IDoc stuck in R/3 side use SM58.
How can I delete these IDoc in one time? the T-CODE 'WE11' and the program 'RSETESTD' can not use in my 4.6C system.RSETESTD.

try BD87

How to Delete IDoc by Sara Transaction without create a file

Hi guru´s
I have a problem.
I am using SARA transaction for Archiving IDoc, but I need to execute and eliminate recods without create a file. In R3 version we have this option in RSEXARCA, but in ECC 6.0 not.
How to execute it?
Some one have the same problem?
Do you have any documentation about Archiving in Ecc 60.0?
Thanks in Advance.
B. Regards
Cristina

Hi guru´s
I have a problem.
I am using SARA transaction for Archiving IDoc, but I need to execute and eliminate recods without create a file. In R3 version we have this option in RSEXARCA, but in ECC 6.0 not.
How to execute it?
Some one have the same problem?
Do you have any documentation about Archiving in Ecc 60.0?
Thanks in Advance.
B. Regards
Cristina

Delete idoc segments

Hi all,
I need to delete the idoc segments for some condition based on the table KNVV value. It is basic type is DEBMAS05.
I have used a wrapper FM ZIDOC_INPUT_DEBITOR as i could not find a user exit in IDOC_INPUT_DEBITOR.
In test run we19, in debuggin i see the incorrect records/segments are getting deleted from IDOC_DATA which is the way i have coded. However when i see the generated idoc number i can see all the segments and the incorrect segments are not getting deleted. Let me know how to delete idoc segments through code.
Note : I have tried in BD59 to reduce the idoc segment, but the condition for our requirnment cannot be possible in BD59.
LOOP AT idoc_data.
    CASE idoc_data-segnam.
      WHEN 'E1KNA1M'.
        gwa_deb_hdr = idoc_data-sdata.
      WHEN 'E1KNVVM'.
        gwa_deb_sale = idoc_data-sdata.
      WHEN 'E1KNMB1'.
        gwa_deb_comp = idoc_data-sdata.
       APPEND gwa_aex_item TO gt_aex_item.
    ENDCASE.
   IF gwa_deb_hdr+0(3) = '004'.
      IF sy-tabix > 1.
    SELECT SINGLE kunnr vkorg vtweg INTO (lv_kunnr, lv_vkorg, lv_vtweg)
            FROM knvv
            WHERE kunnr = gwa_deb_hdr+3(10)
               AND vkorg = gwa_deb_sale+3(4)
               AND vtweg = gwa_deb_sale+6(2).
        IF sy-subrc NE 0.
          DELETE idoc_data INDEX sy-tabix.
        ENDIF.
      ENDIF.
   ENDIF.
ENDLOOP
Thanks,
Senthil

Just want to know.
If the standard idoc segmets cannot be deleted through code or this doesnot work as i ran in test run we19?

How to delete daily all idocs older than one year

Hello
I wander how to delete daily all idocs older than one year. I guess with an job(but how to create it)

Hi
Check this [Link|https://ecohub.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/17c435df-0901-0010-72a7-b9dcd271213d]
Just give a search in SDN you could find lot of doucments releated to archiving of idocs
Regards
Uday

How to delete Zsegment of IDoc?

Hi Experts,
We have created an extension to IDoc (added a Z segment) in 4.7 ERP and transported to the ECC 6.0.
I want to delete the segment in ECC 6.0, which we extended in 4.7.
I believe one way is to delete the segment in 4.7 and export the transport from 4.7 and import into ECC 6.0
Please let me know the ways to delete the segment from the IDoc in ECC 6.0.
Regards,
Venu V

Hi,
Follow the link
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/deleting-idoc-segment-293020
Rgds,
Suman

How to delete a BPM in SXI_CACHE?

Hi,
How to delete a BPM in SXI_CACHE?
With SXI_CACHE, I have an old BPM which is used instead of another one for the same flow : Idoc DEBMAS06 --> XI.
The old BPM was deleted in ID but I don't want to delete it in IR.
Mickael.

Hi Mickael,
You can Delete the XML Objects type from the process in transaction "swf_xmp1".
So the process not longer work in the Workflow Engine.
Regards,
Robin

How to delete the values from TKOMV at runtime after creating PO

Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.

Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu.

How to trigger IDOC in a batch job?

hi,
My requirement is that a batch job must run on R/3 side to check if bank data are created or changed.Any creation or update in table BNKA will trigger an IDOC
If a record is created IDOC BANK_CREATE01 should be triggered and
If a record is changed/deleted IDOC BANK_CHANGE01 should be triggered
A background program should run periodically (every hour) and check the table CDHDR for object class BANK.
The program must check if any new entry exist in the table since the last run.
New records can be identified according to the fields UDATE and UTIME.
According to the change indicator (CHANGE_IND) the program will determine if the IDOC_CREATE (changeID=I) should be run or IDOC_CHANGE (changeID=U or D).
If change ID=D, then deletion indicator will be set in the CHANGE IDOC.
Can anybody tell me how will i write the code for this and how to trigger IDOc as i very basic knowledge in ABAP
Thanks & Regards,
Loveena

hi
whenever changes made to an application document.u want to replicate these changes in target system u have to work with cahngepointers
RBDMIDOC is the program which u have to schedule background
regards
Nagesh.Paruchuri

How to delete request in yellow traffic light?

Hi experts:
I created one infopackage yesterday to load the vendor text from our DEV source system. Its update mode is "Initialize Delta Process". When I right click on the infopackage and select manage, I see this request is still in yellow and 'Request has a yellow traffic light in the monitor - Cannot be deleted.' And when I go to Data selection I got the information: "Init. select. for field name currently running in request ***".
Does anybody know how to delete the request still in running or in yellow traffic?
Another thing is when I double click on the infopackage a warning message will pop up with: " Assign a language field to IOBJ 0LANGU; danger of short dump". Do I need to take care of this warning?
Thanks to everyone for your time in advance~
Tim

Hi,
Make the request forcefully into RED and then delete it, you can do it in RSMO or goto Obejct and Manage and then Click on YELLOW color Ball and then it will popup one window there make to red and delete it.
The reasons for Yellow
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then checl the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
Thanks

How to delete/remove the software component from integration repository

Dear All
How to delete/remove the software component from integration repository which we have created some Data and message types.
Regards
Blue

Hi,
Follow the steps below to delete the Software component:
1. Delete the created Data Types, Message Types, Message Interfaces, Message Mappings, Interface Mappings and other imported objects like RFC's or IDoc's. Activate all changes.
2. Then delete the namespace and the default datatypes present with the namespace after checking "objects are modifiable".
3. Then delete the SW component, after placing the radio button in "Not permitted".
Regds,
Pinangshuk.

Delete IDOCs status 64

Hi Community,
after system copy some HR-Org replication IDOCs got stuck in status 64 "ready to be transferred to application".
I would like to delete them just to make sure they are not accidentally processed at a later point in time.
Any idea of how to delete them or change status? BD87 & related tools don't seem to make the job.
I will reward points for helpful replies.
Thanks in advance and greetings
Julian

Hello,
You can archive Idocs via SARA transaction, but before that you have to check in customizing if the status 64 is ready to be archived. You can do this in transaction we47 --> choose the status 64 and there is on part about archiving, the radio button should be picked as in the option 'Poss'.
Thats all!
Best Regards!

Deleting Idoc

how to delete an inbound/outbound idoc stored in database .
consider in partner profile trigger by background program is selected. so whenever an idoc is generated both for ale/edi they wont start the posting program . Now we can see this idoc using we02. My need is i want to delete this idoc without processing further. Similar for outbound idocs too.
Regards
David Boon.

Sandro Garofano,Michal Krawczyk,Archana
Thanks all for your answers. WE11 itself solve my question.
I worked with WE11 but using BD87 i couldn't proceed.
How to change the status of a idoc using bd87.
Regards
David Boon

How to delete file from client machine

Hi all,
we are using the DataBase: oracle:10g,
and forms/reports 10g(developer suite 10g-10.1.2.2).
can anybody help me how to delete the file from client machine in specified location using webutil or any
(i tried with webutil_host & client_host but it is working for application server only)
thank you.

hi
check this not tested.
PROCEDURE OPEN_FILE (V_ID_DOC IN VARCHAR2)
IS
-- Open a stored document --
LC$Cmd Varchar2(1280) ;
LC$Nom Varchar2(1000) ;
LC$Fic Varchar2(1280);
LC$Path Varchar2(1280);
LC$Sep Varchar2(1) ;
LN$But Pls_Integer ;
LB$Ok Boolean ;
-- Current Process ID --
ret WEBUTIL_HOST.PROCESS_ID ;
V_FICHERO VARCHAR2(500);
COMILLA VARCHAR2(4) := '''';
BOTON NUMBER;
MODO VARCHAR2(50);
URL VARCHAR2(500);
Begin
V_FICHERO := V_ID_DOC;
LC$Sep := '\';--WEBUTIL_FILE.Get_File_Separator ; -- 10g
LC$Nom := V_FICHERO;--Substr( V_FICHERO, instr( V_FICHERO, LC$Sep, -1 ) + 1, 100 ) ;
--LC$Path := CLIENT_WIN_API_ENVIRONMENT.Get_Temp_Directory ;
LC$Path := 'C:';
LC$Fic := LC$Path || LC$Sep || LC$Nom ;
If Not webutil_file_transfer.DB_To_Client
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
Raise Form_trigger_Failure ;
End if ;
LC$Cmd := 'cmd /c start "" /MAX /WAIT "' || LC$Fic || '"' ;
Ret := WEBUTIL_HOST.blocking( LC$Cmd ) ;
LN$But := WEBUTIL_HOST.Get_return_Code( Ret ) ;
If LN$But 0 Then
Set_Alert_Property( 'ALER_STOP_1', TITLE, 'Host() command' ) ;
Set_Alert_Property( 'ALER_STOP_1', ALERT_MESSAGE_TEXT, 'Host() command error : ' || To_Char( LN$But ) ) ;
LN$But := Show_Alert( 'ALER_STOP_1' ) ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Raise Form_Trigger_Failure ;
End if ;
If Not webutil_file_transfer.Client_To_DB
LC$Fic,
'TABLE_NAME',
'ITEM_NAME',
'WHERE'
) Then
NULL;
Else
Commit ;
End if ;
LB$Ok := WEBUTIL_FILE.DELETE_FILE( LC$Fic ) ;
Exception
When Form_Trigger_Failure Then
Raise ;
End ;sarah

How to Delete the dimension from the cube ?

Hi ,
how to Delete the dimension from the cube ?
i have added the new dimension by assiging one characteristic to that dimension .
now i want to delete it ,
but system saying that Dimension ZXXX contains InfoObjects; deletion not possible .
how to delete it ? any help .
Thanks

Make sure you donot have any data in cube. If you have some data in cube, then you will not be able to see Delete option.
Right click on the cube-->Delete data.
Then double click on the cube>Goto Edit mode> select the IO under that Dimension> right click> now you will be able to see the Delete option (provided you have deleted all the date from Cube)
Then right click on Dimension-->Delete
Regards,
Pavan

How to Delete IDOC

Similar Messages

Maybe you are looking for