How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Similar Messages

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to read the hierarchy data from the same table using loop in AMDP method

Hi All,
We have a requirement to get the top partner from BUT050 table.
Here the Top parent is nothing but the top most in the hierarchy of the partners from BUT050.
Example:
For partner 1234 (BUT050-PARTNER1) there is partner 3523(BUT050-PARTNER2) one level above
For partner 3523(BUT050-PARTNER1) there is partner 4544 (BUT050-PARTNER2) last level .
so in this case for the partner 1234 the Top parent is 4544 .
I have created AMDP Procedure method to get the top-parnet and below given is the logic implemented in AMDP method.
Here i have implemented a recursive logic with the WHILE loop to get the top most hierarchy partner from the same table BUT050
IV_Parent is the input partner and ev_top_parent is the output value.
AMDP Procedure Method:
    DECLARE lv_date VARCHAR(8) := TO_VARCHAR (current_date, 'YYYYMMDD');
    DECLARE found INT := 1;
          iv_partner1 = SELECT partner1 FROM but050
                          WHERE partner2 = iv_partner
                          AND reltyp = :iv_hierarchy
                          AND date_to >= :lv_date
                          AND date_from <= :lv_date;
     WHILE found <> 0 do
       select partner1 into ev_top_parent from :iv_partner1;
                       iv_partner1 = SELECT partner1 FROM but050
                       WHERE partner2 in ( select partner1 from :iv_partner1 where partner1 is not null)
                       AND reltyp = 'ZBP004'
                       AND date_to >= :lv_date
                       AND date_from <= :lv_date;
       select COUNT ( partner1 ) INTO found FROM :IV_PARTNER1;
    END WHILE;
This method is working fine, but here it is only taking one single partner and getting the top parent as output.
Now i would like to convert this mehtod so as to accept n number of partners (not one single partner) as input and should process each partner to get the top parent.
Could anyone guide me how can i handle the given AMDP method further so as to work some how it is within another loop from other AMDP method.
Thanks.
Regards,
Laxman.P

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How to delete the Junk Data From Excel Sheet

Dear ABAPers,
            I am uploading the Excel sheet from the Desktop to the SAP System. In the Internal table i am getting Unwanted Junk data's for Example '##########'.I am not getting this Junk data for all the times. i am getting it for Some times.How to ignore these junk data.
Thanks & Regards,
Ashok.

Dear Friends,
            I communicated wrongly.I am very sorry for that.The Problem is I am getting All the Data into the internal table in addition to that lines i am getting the Junk data in the internal table at the end of the internal table.
Excel Sheet
L-1     21.10.2008     1110     888555444676001
L-1     21.10.2008     1110     888555444676002
L-1     21.10.2008     1110     888555444676003
L-1     21.10.2008     1110     888555444676004
Internal table
L-1     21.10.2008     1110     888555444676001
L-1     21.10.2008     1110     888555444676002
L-1     21.10.2008     1110     888555444676003
L-1     21.10.2008     1110     888555444676004
Thanks & Regards,
Ashok.

How can delete my iphone5 data from the date its restored?

how can delete my iphone5 data from the date its restored?

it's unclear what you mean
if you wish to remove your iphone5 data you connect it to iTunes on the computer and click the restore button and choose restore to factory defect

How to delete backend system data from GRC,GRC 10 AC

Hello experts,
we have connected multiple ECC systems to GRC by creating connectors with respect to each system and
currently we are using,now due to some reasons customer requested to delete complete data from
one of the ECC system from GRC.
we are using only access control with all components
please suggest how to delete all relevant data
from GRC system
Thanks
GRC Admin

Hi,
You can use program GRAC_DELETE_ACCESS_RULES to achieve your requirement.
2075597 - How to delete specific system from SPRO
Regards,
Madhu.

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

How to delete the unwanted songs from my account?

how to delete the unwanted songs from my account?

You can't permanently delete any purchase from your account, all you can do is hide them from the cloud via your computer's iTunes: iTunes Store: Hiding and unhiding purchases - Apple Support
Unless you are referring to the U2 Songs Of Innocence album that was given free to everyone last year : http://itunes.com/soi-remove

How to delete the movie "Hugo" from my itouch5 after downloading it from the free app "12 days" from apple

How to delete the movie "Hugo" from my itouch5 after downloading it from the free app "12 days" from apple?

I do not know what you mean left or right, but if I press the edit button it still will not give the option to delete.

How to delete a particula record from InfoObject

Dear All,
I got some problem situations and would like some suggestions from any of you.
<b>Problem detail</b>- one process chain was failed due to could not activate an ODS-A
- ODS-A and ODS-B contained InfoObject-0BP_GUID
- errors were found and referred to the InfoObject-0BP_GUID.
- The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
Any suggestion would be appreciated.
Thank you very much.
-WJ-

Unfortunately you cant delete data without inpacting the data in the. This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
If you still wish to do, proceed as follows:
1. Delete the data in cube first.
2. Delete the particular record from the master data table.3
3. Reload the data to the ODS / cube.
Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
(a) " not all master data could be deleted
(b) "the master data can not be deleted".
Ravi Thothadri

How to delete the Generated files from application server(open hub)?

hi experts,
when i try to execute process chain the DTP it is giving below dump. Exception CX_RSBK_REQUEST_LOCKED logged.
when i execute the DTP manually and trying to delete the previous request, it is giving for dump ITAB_DUPLICATE_KEY.
so to delete the generated file from application server, how to delete it for specific dates?
Information on where terminated
Termination occurred in the ABAP program "GPD6S3OE0BCVGC6L9DBNVYQARZM" - in
"START_ROUTINE".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 2874
of the (Include) program "GPD6S3OE0BCVGC6L9DBNVYQARZM".
The program "GPD6S3OE0BCVGC6L9DBNVYQARZM" was started as a background job.
and when i check the dump it is point out at below code
" Populate the lookup table for 0STOR_LOC
SELECT * from /BI0/TSTOR_LOC
into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
but the programme is syntactically correct only.
how to rectify the issue.
regards
venuscm
Edited by: venugopal vadlamudi on Sep 28, 2010 1:59 PM

hi experts,
We have written start routine to get the storage location text and sending to File located at Application server through OPEN HUB.
here is the code written in the Transformations
In the global section
Text for 0STOR_LOC
    DATA: l_0stor_loc_text TYPE HASHED TABLE OF /bi0/tstor_loc
          WITH UNIQUE KEY stor_loc.
    DATA: l_0stor_loc_text_wa TYPE /bi0/tstor_loc.
and in the code to get the text
" Populate the lookup table for 0STOR_LOC
    *SELECT * from /BI0/TSTOR_LOC*
      into CORRESPONDING FIELDS OF table L_0STOR_LOC_TEXT
      FOR ALL ENTRIES IN SOURCE_PACKAGE WHERE
              STOR_LOC = SOURCE_PACKAGE-STOR_LOC.
im sure there is problem with the Routine only. i think i need to change the code if so please provide me the modified one.
thanks
venuscm
Edited by: venugopal vadlamudi on Sep 29, 2010 9:37 AM

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to delete a particular data from 3 arrays

hello,
i have a program that works like this.....
import java.io.*;
public class NewMain {
BufferedReader in=new BufferedReader(new InputStreamReader(System.in));
String [] Type= new String[10000];
int [] Num= new int[10000];
float [] Price= new float[10000];///////
and i am reading some of the data into these arrays
so if i want to delete a particular data from the arrays how do i do that
and if i want to delete pants from that file and enter the text again how do i do that.? any idea?....
e.g if the file contains
shirt
32
56.5
pants
56
45.9

Ashish.Uppin wrote:
hello,
i have a program that works like this.....
import java.io.*;
public class NewMain {
BufferedReader in=new BufferedReader(new InputStreamReader(System.in));
String [] Type= new String[10000];
int [] Num= new int[10000];
float [] Price= new float[10000];///////
and i am reading some of the data into these arrays
so if i want to delete a particular data from the arrays how do i do that
and if i want to delete pants from that file and enter the text again how do i do that.? any idea?....
e.g if the file contains
shirt
32
56.5
pants
56
45.9
Buddy, it seems to me that you are describing data that belongs together -- a class. You are probably better off with one arraylist of objects of this class, each object having a String type variable, an int num variable, and a float price variable, make that a double price variable.
For examples of arraylists in action, please see the Sun java tutorials.

How to delete the Hierarchy data from Infoobjects.

Similar Messages

Maybe you are looking for