How to delete a particula record from InfoObject

Dear All,
I got some problem situations and would like some suggestions from any of you.
<b>Problem detail</b>- one process chain was failed due to could not activate an ODS-A
- ODS-A and ODS-B contained InfoObject-0BP_GUID
- errors were found and referred to the InfoObject-0BP_GUID.
- The errors referred to one record composed of incorrect data. I still wondered where it came from since normally, 0BP_GUID keeps only guid.
I'd like to delete the incorrect record.But I do not want any impact to InfoProviders.
I'm not sure how to resolve this case. This has to be very carefully managed because it happened on production system.
Actually, I did find one thread in this forum "Delete SID table content". But I'm not sure whether it could be applied to my case.
Any suggestion would be appreciated.
Thank you very much.
-WJ-

Unfortunately you cant delete data without inpacting the data in the. This is how BW works and you will appreciate this because youur transaction data is secured and you wont face any data issues later on. Let me give you an example. Lets sa your ODS or cube stored sales data and in the ODS you have sales org, customer and amount. When you run the report, data is read from this cube /ods, but to fetch the master data it goes to the master data tables via SID. When the transaction data gets loaded and when you try to delete a record in master data, it will let you do.
If you still wish to do, proceed as follows:
1. Delete the data in cube first.
2. Delete the particular record from the master data table.3
3. Reload the data to the ODS / cube.
Without deleting the transaction data in the ODS / Cube the system wont let you delete the data in master data and you will get any of the following messages.
(a) " not all master data could be deleted
(b) "the master data can not be deleted".
Ravi Thothadri

Similar Messages

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

How to delete some of records from wf_notifications table any API Name?

Hi All,
I want to delete some of records from wf_notifications table , can any one tell API' name and Back end delete process.
Thanks,
Ramu
Edited by: Ramu on Mar 20, 2013 5:42 AM

Hi ,
I hv done below script, now it's working fine.
DECLARE
CURSOR csr_transaction_id IS
SELECT   hat.transaction_id,
         hat.item_type,
         hat.item_key,
         ppx.employee_number,
         hat.section_display_name
FROM   hr_api_transactions hat, per_people_x ppx
WHERE   hat.process_name = 'HR_PERSONAL_INFO_JSP_PRC'
         AND hat.selected_person_id = ppx.person_id
         AND ppx.employee_number IN
                  ('100024773',
                   '100024820',
                   '100024859',
                   '100024879',
                   '100024902',
                   '100024937',
                   '100025137',
                   '100026470',
                   '610014755',
                   '610017039')
order by ppx.employee_number;
BEGIN
dbms_output.put_line('***Deleted all Transactions and Notifications of below Employee Personals Tranactions ***');
   FOR my_cur_v IN csr_transaction_id
   LOOP
   /*Delete all Transaction_id's in hr_api_transactions,hr_api_transaction_steps,hr_api_transaction_values and hr_api_transaction_steps_bk tables */
    hr_transaction_swi.delete_transaction
                          p_transaction_id =>my_cur_v.transaction_id,
                          p_validate => hr_api.g_false_num
    wf_engine.abortprocess (
                              itemtype => my_cur_v.item_type,
                             itemkey => my_cur_v.item_key
     /* Deleted all Notification_id's and item_key's in wf_item_activity_statuses,wf_items,wf_item_attribute_values,wf_notifications     Table */
     wf_purge.items (
                      itemtype => my_cur_v.item_type,
                     itemkey => my_cur_v.item_key
    dbms_output.put_line('Emp No --'||my_cur_v.employee_number||'Transaction_id :'||my_cur_v.transaction_id||'Emp Personal Info :'||my_cur_v.section_display_name||
                          'Item Type :'||my_cur_v.item_type|| 'Item Key :'||my_cur_v.item_key);
   END LOOP;
   commit;
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('hr_transaction_swi.delete_transaction api goest to exception block'    ||sqlcode|| ' '||sqlerrm);
END;
/thanks,
Ramu

How to delete same name records from datagrid,while i am selecting one of the record and delete

hi friends,
i am working in flex 4 mxml web application with action script....i am using a data grid and one delete button outside the gird.
i have two records in the same name in grid, when i click one record from the grid and click delete means that time ,both records will delete from that grid
which record having the same name..
how to do this?
any useful suggesssion or snippets code for this..
Thanks in advance,
B.venkatesan.

hello,
first get the length of the datagrid.
suppose your datagrid id is db and you want to delete the the row which have same name .....
first get the selected row and from that name of the selcted row.
supoose selected name is
var index:int=db.selectedindex;
var selname:string =bd.dataprovide.getItemAt(index).name;(name id datafield of the column).
now you got the selected name search for the same rows in datagrid.
var totallen:int=(db.dataprovider).length;
for(var i:int=0;i<totallen;i++)
    var checkduplicate:string=bd.dataprovide.getItemAt(i).name;
   if(checkduplicate==selname)
     db.dataProvider.removeItemAt(i);
this will delete all the row which are with same name with selected row name...
Gajanan Hiroji | [email protected] | www.isacglobal.com

How to delete the child record from the database

how to delete a parent and child record from the database can we do it in the servlet and my database is oracle

I'm not sure I understand the question but you could certainly use the JDBC API from within your servlet to access and modify a DB. You could also use an EJB layer to access your DB and accomplish the same tasks.

How to delete the matching records from two internal tables

Hi ,
I have two internal tables say A and B of the same type. If A has 10 records and B has 4 records , I want to delete the 4 records in B from A .
loop at B into wa .
delete A where key = wa - key .
endloop.
takes a long time if the table B is huge. how can I improve the performance.
Thanks.
Gayathri

Hi Gayathri,
You could try field-symbols. It reduces the data transfer from the internal table B to the work area.
field-symbols <fs_itab_b> like line of B.
loop at B assigning <fs_itab_b>.
delete A where key = <fs_itab_b>?-key.
endloop.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

How to Delete the condition record in CRM

HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION         = 'E'
DATA-SEL_OPT-CT_APPLICATION              = 'CRM'
DATA-SEL_OPT-OBJECT_TASK                    = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME        = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN                  = 'I'    (Including)
DATA-SEL_OPT-RANGE-R_OPTION           = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
Shankar

Hi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3     CND_MAST_SEL_DEL_EXT_VALIDATE     CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
    DATA          = ls_date
IMPORTING
   RETURN        = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
    return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM

How to speed up the deletion of 11million records from the table

Hi,
How to speed up the deletion of 11million records from the table.
I need expiditious reply. Please do the needfull in advising
Regards

Please try to understand the question.Well it would help if you would answer some of the questions you have been asked as your question is not complete and clear and no matter how hard we try, we really need you to try and ask the question properly.
So as previously asked
Which simply supports the idea that we need:
1) better definition of the business purpose (why)
2) oracle version
3) operating system
4) hardware configuration
to give a moderately accurate answer.
I would like to add
5) How many rows in total in the table to begin with.
6) What is your delete statement
7) Is this a one time operation or will it happen regularly
8) Can you use partitioning.

How to delete string or line from unix file(dataset) of application server

Hi All,
After transfer workarea information or all records into dataset(unix file). When I see the file in application server automatically the last line is shown a blank line. I am not passing any blank line.
I have tried for single record than also the file generates the last line(2nd line) also a blank line.
When I m reading the dataset, it is not reading the last blank line but why it is showing the last blank line?
How to delete string or line from unix file(dataset) of application server?
Please give your comments to resolve this.
Thanks
Tirumula Rao Chinni

Hi Rio,
I faced similar kind of issue working with files on UNIX platform.
The line is a line feed to remove it use
DATA : lv_carr_linefd TYPE abap_cr_lf VALUE cl_abap_char_utilities=>cr_lf.
DATA : lv_carr_return TYPE char1,
         lv_line_feed   TYPE char1.
lv_line_feed   = lv_carr_linefd(1).
lv_carr_return = lv_carr_linefd+1(1).
Note: IMP: The character in ' ' is not space but is a special
character set by pressing ALT and +255 simultaneosly
REPLACE ALL OCCURRENCES OF lv_line_feed IN l_string WITH ' '.
REPLACE ALL OCCURRENCES OF lv_carr_return IN l_string WITH ' '.

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

Delete overlapping/duplicate records from cube

Hi All,
Kindly let me know how to delete overlapping requests from a cube. Actually the cube is getting loaded from varuous infosources, but there are records which get duplicated and the are not wanted , then hiow to delete the duplicate records from the cube.
Regards,
dola

I think what arun is perfectly right....
use DSO for consolidation of various requests..from diferenet infosources...
Now load from DSO to cube...and it is very much possible...though will require little work.
Delete duplicate records option is usually used for master data.With transacdtion data i don't think its advisable.
Regards,
RK

Delete a user record from oracle db

Hi,
Can anybody share me a custom workflow which deletes a user record from the oracle db.The user does exist in SUN IDM.
Please help me.
Thanks in advance.

You can use a Trigger and UTL_FILE to write to a file (on the server).
Example:
create or replace trigger test_file
after insert or delete or update on test_case
for each row
declare
v_logfile utl_file.file_type;
begin
v_logfile := utl_file.fopen('\myfiles','test_file.log','a');
if inserting then
     utl_file.put_line(v_logfile,'Inserting to table');
elsif deleting then
     utl_file.put_line(v_logfile,'Deleting to table');
else
     utl_file.put_line(v_logfile,'Updating to table');
end if;
utl_file.fclose(v_logfile);
end test_file;
I want to generate a log file in which i want to dump some useful messages, when anyone does a dml operation on a table, and also, i want to have a switch like YES or NO (may be an environment variable,,) if i switch it to YES the log file should get generated, if NO then, no log file will be generated..
can anyone help, how can you do this task ?
thanks a lot in advance..
srini

HT1918 I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it.

I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it.

I need to know how to delete my credit card from account because I know longer have a credit. I just want to be able to up date my Apps but I can't now because there is a credit card on my account what do I need to delete it. Also my credit has expired so i need to delete it.

HOW TO DELETE ADOBE READER FILE FROM ADOBE READER

HOW TO DELETE ADOBE READER FILE FROM ADOBE READER@ !@

Your question make no sense. What exactly are you trying to do?

How to delete a particula record from InfoObject

Similar Messages

Maybe you are looking for