How to delete the region code for country in T005U

Hello,
The region code for XX country are changed, So I have deleted all entries for that country in transaction code "OVK2" and updated the new region code which should be updated in Table T005S and T005U.
But in table T005U there are few region code for language other then EN. Now I need to delete the entries T005U for other language.
Now region code in OVK2 = Table T005S, but not equal to T005U
How language can be selected to delete the region code (TABLE T005U), please advise.
Thanks in advance.
Praveen

Hi Praveen,
In order to delete the entries from the language table T005U, you will have to maintain in T005S.
It means that, suppose in table T005U, you have a region appearing in two languages danish and german and the corresponding entry does not exist in T005S, then follow the steps below.
1. Maintain Region XX in EN in T005S.
2. Log on in language Danish, and in table T005U, only delete the text and log off.
3. Log on in Language German, and in table T005U, delete the text only and log off.
4. Now your T005U table is clear, log on in language EN and delete from table T005S.
5. Check both tables T005S and T005U for the region XX. they both should be empty.
Regards,
SAPFICO

Similar Messages

How to delete the old code in the EXIT_SAPLRSAP_001

Hi All,
In R3 system, I wrote an exit for 2LIS_11_VAHDR by using T-code CMOD in the function exit EXIT_SAPLRSAP_001 and the code does not meet my requirement today i want to delete the code and i will write the fresh one. now my problem is i am not able to delete the code can any body suggest me how to delete the old code.
and can we create new project and can we assign to the Enhancement RSAP0001.
Can anybody suggest me in this
Thanks in advance......
Narendra

Hi Narendra,
You can put the code in comments, if you don't want to use the old code..You can delete also..But be sure that code belongs to you only..
SE38>zxrsau01>change-->find out your data source
Comment(Or can delete) the code starting from WHEN '2LIS_11_VAHDR'. to the end of the code that you have written..
If you really want to delete the assignment of RSAP0001 to your old project>goto CMOD>your project name>change>delete assigment
Then create a new project and assign the enhancement RSAP0001 to your new project and write the code in Include 'ZXRSAU01'..
Hope it helps
Thanks
Teja

Does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"

Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

How to view the source code for Native Method

hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nik

Buy/acquire a C/C++/assembly code disassembler and run the shared library through it.

How to display the 'language code' for language dependent 'Short text' ?

Hi,
I am new to BW.
Can somebody help me with the following issue?
I have an attribute 'Material category description' and I chose short text exists and made it language dependent. I had loaded the master data successfully.
Now I want to know how to check the 'language code' for this material category description. When I display the data, will the language code display by defalult?
I had checked the text table using SE11
It displays the following fields over there.
/BIC/TS1_MCT_DS   [ /BIC/TS1(InfoObject name) ]
LANGU
TXTSH
I appreciate your help!
Thank you
Sekhar

Dinesh,
I went to RSD1 -> info-object -> Master Data/text tab. It shows my language selections there (Short text selected, language time dependent etc.) with everything grayed out.
In SE16, I could display the data in the following format.
/BIC/ST_PRID                TXTSH                 TXTMD
P01                                   umbrella                 rainyday
P02                                  tent                         waterproof
etc.
I want to see the 'language code' as one of the columns in this table.
Can you help me do that?
Thank you,
Sekhar

How to check the tran code for specific activity.

Hello friends ,
could you please let me know how to check the tran code for specific activity . AS in table , i can check , what transaction does what ? But now i need to check the transaction for specific activity .
E.g , For Administrator workbench , there is transcation like RSA1 .
thanks in advance
Regards

Hi,
try the TSTC table with SE16.
Hope it helps,
MG

Delete the company code for all customization

Hi All
is it possible to delete the company code, if yes how to delete the company code?.
is it possible to house keep the company code?
Please help us to provide the necessary solution.
Regards
K.Gunasekar

Hi,
It is possible to delete company code, but have you started using the company code already?
Path to delete company code
IMG -> Enterprise Structure -> Definition -> Financial Accounting -> Edit, Copy, Delete, Check Company Code
Your second question is not clear to me. Could you please elaborate.
Regards,
Abhinav Sethi

How do I set the region code for my Mac?

I have been using my powerbook since 2004. I must have changed the region code once before for the DVD player. But since then any and all DVD's have played - unless the DVD itself had a problem. A few days back i put in a DVD which needed region change. Without thinking I changed it and now I have DVD's that used to play before, not play anymore. Please let me know how I can put the region code back to what it was - where all DVD's played.
I don't think I have changed the region code five times - but can one really nor change the code once it has changed the fifth time???????? Please advice.

I got a prompt when I had inserted the DVD which needed region change. But not now when I put in any other DVD. Some work, some don't. Is it not true that when changing the fourth time, the machine gives some indication that the next time will be the last? I thought so, whcih is why I am wondering, why it is not prompting or warning me.

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

How to write the dynamic code for RadioGroupByKey and Check Boxes?

Hi,
Experts,
I have created a WD ABAP application in that i have used RadioGroupByKey and CheckBox Ui elements but i want how to write the dynamic code to that i want to display male and female to RadioGroupByKey and 10 lables to check boxs.
Please pass me some idea on it and send any documents on it .
Thanks in advance ,
Shabeer ahmed.

Refer this for check box:
Do check :
bind_checked property is bind to a node with cardinality of 1:1
CHECK_BOX_NODE <---node name
-CHECK_BOX_VALUE <--attribute name of type wdy_boolean
put this code under your WDDOMODIFYVIEW:
DATA:
lr_container TYPE REF TO cl_wd_uielement_container,
lr_checkbox TYPE REF TO cl_wd_checkbox.
get a pointer to the RootUIElementContainer
lr_container ?= view->get_element( 'ROOTUIELEMENTCONTAINER' ).
lr_checkbox = cl_wd_checkbox=>new_checkbox(
text = 'WD_Processor'
bind_checked = 'CHECK_BOX_NODE.CHECK_BOX_VALUE'
view = view ).
cl_wd_matrix_data=>new_matrix_data( element = lr_checkbox ).
lr_container->add_child( lr_checkbox ).
Refer this for Radiobutton :
dynamic radio button in web dynpro abao
Edited by: Saurav Mago on Jul 17, 2009 10:43 PM

I am getting ready to wipe a PC clean but wanted to know how to get the activation code for the Version of Adobe reader that is currently installed on the PC?

I do not have the activation code for this PC and need to know how to get the software loaded back on it after a clean install of the OS and other programs.

If you use any additional subscription services to Adobe Reader, they are activated with your Adobe ID & password.

How to write the ABAP code for Datasource Enhancment

Hi Team,
Can you please help me how to write the code for the enhancement i have made to the standard datasource
i have added the fields ZZPayer and ZZPayer_access.
I just wanted to know how to write the ABAP code to populate the data for these fields.
Regards,
Pradeep P.

Hi
From a performance point of view would like to suggest a few changes :
WHEN '<DS name>'.
select zzfields from <table> into itab
for all entries in c_t_data where <condition>.
If sy_subrc = 0.
loop at c_t_data assiging f_c_t_data.
read itab into wa_itab where key = f_c_t_data-key.
f_c_t_data-zzfield = wa-itab-zzfield.
endloop.
refresh itab.
regards,
aparna
endif.

How to delete the TXN codes from Tcode Field

Dear All,
Can any one help me in removing the tcode list from the transaction code field where we execute tcodes from?
Also, in the login screen of SAP, it suggest the list of users who accessed SAP recently. I want to delete that as well.
Your help would be appreciated.
Thanks in advance.
Regards,
Faisal

Hi Manu,
Thanks alot for your reply. I did as you have directed. In the login screen, now i dont find those recently used user ids. However, in transaction code field still the recently used tcodes are available. How do i remove them from there?
Regards,
Faisal

How to find the t-code for table (SM30 or SE16)

Once I create a t-code though SE93. And I choose type: Transaction with parameters. Then the Transaction is SM30,
But I forget the t-code, how do I find this t-code base on the table name.
ep:

Hi
Use database table TSTCP and search for tcode with below selection criteria.
Enter *tablename* in param filed and execute.
Thanks

How to find the transaction code for the particular program or include

Dear All,
Please help me on this queary.
1) How to find what is the transaction assigned for the particular Report
2) How to find the particular include is used in which programs and also transaction codes
I have one ZProgram that contains only includes no selection screen, I have to find where this program is used, in that one include is ther I would like to know in which program and in which transaction that is used,
They have given ME9F, ME21N/22n, wheren this includle is calling.
Please kinely help on this.
Thanks and Regards,
Muralikrishna

HI
1. you can find the transaction for your report by opening in se80. On the left side window it will show the transaction if there is any.
2. to find in which programs particular inclue is called , just open include in se38 and press where used list icon. in the pop up window select programs.
regards
vijay
reward points if helpful

How to delete the region code for country in T005U

Similar Messages

Maybe you are looking for