How to delete the runtime error in st22
Hi all,
How to delete the runtime error in ST22. I want to clear
the list of short dump in st22
is there any T.code or any table to clear?
thanks in advance
sundar.c
Hi
you cannot delete the dumps through any tcode.
All the dumps are stored in table called SNAP, If there are more dumps the table gets filled therefore u have to reorganize the table.
Run the report RSSNAPDL in SE38.
or
You have the default SAP background jobs, SAP_REORG_ABAPDUMPS which deletes the past dumps raised in the system.
Scheduling the jobs in regular is very important
For more information
http://help.sap.com/saphelp_nw04/helpdata/en/c4/3a7ede505211d189550000e829fbbd/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d8/a58b4275160d53e10000000a155106/frameset.htm
Regards
Bhaskar
Similar Messages
-
Delete the Runtime Errors List from ST22 t-code
HI all;
Can any one Help on these Issue!
How to delete the list of Runtime Errors, which are available in ST22 T-code .
Thnaks
Upender.Hello,
you could use the report RSSNAPDL .
Regards Wolfgang -
How to Delete the PO Error in Transfer in SRM
Hi All,
Can you tell me , what FM should i use to delete the PO in SRM
I was using FM META_PO_DELETE , but guess it deletes the PO in the Backend.
Thanks & Regards,Hi,
You want to delete the PO completely from the DB or just mark it as delete?
If you want to delete it from the database then use the FM BBP_PD_PO_DB_DELETE.
This will delete the PO completely from DB.
If you just want to mark it as delete then there is button "Delete" in the PO you can use it. The PO is set to delete and the same info is transfered to backend.
Regards,
Zubair. -
How to delete the short dump list in st22
Hi all,
i want to clear the runtime error list in ST22.
How to clear the list of short dump in ST22.
is there any T.code kindly suggest
thanks in advance
Sundar.cDear Sundar,
By default, short dumps are stored in the system for 14 days. The transaction for managing short dumps is ST22. You can delete short dumps in accordance with a time specification using the Reorganize function, which you can call by choosing
Goto u2192 Reorganize in ST22. You can save a short dump without a time limit using the Keep function, which you can choose under Short Dump u2192 Keep/Release in ST22.
The short dumps are stored in table SNAP. If there are too many entries in table SNAP, problems can occur during the reorganization (see SAP Note 11838). There are different options for deleting short dumps from table SNAP:
1. Call transaction ST22. Choose Goto u2192 Reorganize. You can now specify that all short dumps older than n days old (default 7) are to be deleted. If a very large number of records are deleted at once during the reorganization,
ORACLE error ora1562, failed to extend rollback segment ..., can occur. In this case, see SAP Note 6328.
2. Dropping and recreating table SNAP with the database utility (transaction SE14): you can use this transaction to drop and recreate the table SNAP. This means that all short dumps are deleted.
3. The reorganization program RSSNAPDL deletes old short dumps in pieces (to avoid database problems) from table SNAP. It deletes short dumps that are not flagged for retention and are older than seven days old. Schedule this program at a time of low workload, as large changes in the database are to be expected. The program RSNAPJOB performs a standard scheduling: it starts the program RSSNAPDL every day at 1:00 a.m.
4. TableSNAP is also automatically reorganized. At every short dump that occurs in dialog (the dump is displayed immediately after it is created), a maximum of 20 short dumps that are older than 7 days old are deleted from SNAP. This reorganization should be sufficient in normal production operation.
Hope this information resolves your error and also more useful in the feature.
Thanks
Kishore -
does anyone know how to delete the back up for the ipod? I am getting an error message that says "iTunes could not back up iPod because it is corrupt or not compatible with iPod; delete back up and try again"
Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup
-
How to delete the values from TKOMV at runtime after creating PO
Hi,
How to delete the values from TKOMV at runtime after creating PO from IDOC. I am creating PO through IDOC, subsequently need to create Sales order and again need to create 2nd PO with reference of Purchase Requestion(created with sales order). At the time creation of 2nd PO the Header conditions are appearing twice and net price value is appearing wrong.
Thanks in advance.Hi Padma
Can you do this activity once the company code is in to production. I guess you can not do this activity, if the company code is already in to live. Setting or resetting of the recon accounts will hinder the previous actitivity. Infact resetting of the company code is also not a good option.
Any how, thanks for the inputs. Please let me know whether i can do this activity only at the subledger level which will not impact other modules. The one solution i can figured out is , reverse all the transactions for the corresponding asset in the year of takeover and pass the entries again in the same year correctly which will have effect in Subledger and also in general ledger. But the business people will not allow this, since for a big client it will require lot of authorizations and approvals. Infact the vendor also, is cleared. So we have to reverse the cleared documents as well which is again a task and require approvals as well.
Thanks and regards
Seshu. -
How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
Every time I try to use google for a search, I get the following error msg. Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]. I saw the solution provided for MS XP, but not for Vista. Also, while I saw the solution, I need more explicit instructions on how to "delete the ebay extension".
== This happened ==
Every time Firefox opened
== When I try to load google from Firefox, I get the error message, Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]Tools->Add-ons->Extensions
At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
In the Add-ons window, select the Extensions panel.
Select the add-on you wish to uninstall.
Click the Uninstall button. When prompted, click Uninstall to confirm.
Then restart Firefox.
Read here:
[[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]] -
I am trying to fix the runtime error that occurs when I open the Photoshop Elements 10 editor and shuts down the program. I am using the instructions found on the abode website here:
http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
There are no good instructions telling me what the Preferences file is named or how to find it. If someone could help that would be great.If you are using Windows 7 then the preference file that needs to be renamed is at this location:
<C:\Users\USERNAME\AppData\Roaming\Adobe\Photoshop Elements\10.0\Editor>
In the above path, replace USERNAME with your windows profile name which could be something like jblogetc or whatever. Also the preference file is called: Adobe Photoshop Elements 10 Prefs.psp and this needs to be renamed to Adobe Photoshop Elements 10 Prefs.old
Once this done, restart PSE 10 and then see if it works. -
How do i solve the Runtime Error: java.lang.UnsatisfiedLinkError
Runtime Error: java.lang.UnsatisfiedLinkError
// Dialog_age
import javax.swing.JOptionPane;
public class Dialog_age
public static void main(String arguments[])
String Input_Age;
int age;
Input_Age = JOptionPane.showInputDialog("Enter a number.");
age = Integer.parseInt(Input_Age);
JOptionPane.showMessageDialog(null , "Your age is " + age);
System.exit(0);
}Whenever i run this program or a program similar to that program. I get the Runtime Error (anytime i run the program on a command prompt, but if i run it on my jGRASP it runs ok!): java.lang.UnsatisfiedLinkError.
Here is my Error Message:
C:\java>java Dialog_age
Exception in thread "main" java.lang.UnsatisfiedLinkError: sun.font.FontManager.initIDs(
Z)V
at sun.font.FontManager.initIDs(Native Method)
at sun.font.FontManager.access$000(Unknown Source)
at sun.font.FontManager$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.font.FontManager.<clinit>(Unknown Source)
at sun.java2d.SunGraphicsEnvironment.addDirFonts(Unknown Source)
at sun.java2d.SunGraphicsEnvironment.registerFontsInDir(Unknown Source)
at sun.java2d.SunGraphicsEnvironment.access$200(Unknown Source)
at sun.java2d.SunGraphicsEnvironment$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.java2d.SunGraphicsEnvironment.<init>(Unknown Source)
at sun.awt.Win32GraphicsEnvironment.<init>(Unknown Source)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
at javax.swing.RepaintManager.<clinit>(Unknown Source)
at javax.swing.UIManager.initialize(Unknown Source)
at javax.swing.UIManager.maybeInitialize(Unknown Source)
at javax.swing.UIManager.getDefaults(Unknown Source)
at javax.swing.UIManager.getString(Unknown Source)
at javax.swing.UIManager.getString(Unknown Source)
at javax.swing.JOptionPane.showInputDialog(Unknown Source)
at javax.swing.JOptionPane.showInputDialog(Unknown Source)
at Dialog_age.main(Dialog_age.java:14)
But a few weeks ago i could run the program on a command prompt , perfectly!
I recently came to the conclusion that it has something to do with me upgrading my IDE(jGRASP) and Java language.
Now, since thats the case how do i resolve this error. That BUGGING the heck out of me!
Thanks and Peace!Hi,
Check which JRE/JDK is used by your jGRASP.Then set the path environment variables according to that.
I'm afraid you have multiple jre/jdk in your system and one of that has problem with native libraries.
Best of luck!! -
ADF Desktop Integration : How to delete the table in Excel?
Hi,
I am using Jdev 11.1.1.3.0 and Excel 2007 for Oracle ADF DI, I had created an ADF table using pageDef file in the excel. Now I wanted to delete that table and use a different pageDef file.
I could not find a way to delete that table.
I deleted full row of tables and then I used different pageDef file and created a new adf table. But when I am running this version of excel, I am getting runtime exception and excel is getting corrupted.
My question how to delete the table not corrupting the Excel.
Thanks
PavanPavan,,
Welcome to OTN.
You can delete the table by selecting the top left column (of the table) and then select delete from the ADFdi tab.
Refer the documentation for more info.
http://docs.oracle.com/cd/E17904_01/web.1111/e10139/get_start_dev_tools.htm#ADFDI608
-Arun -
How to Delete the condition record in CRM
HI,
Can you please help me how to delete the condition record from condition table in CRM.
Please explain the usage of FM CRMXIF_CONDITION_SEL_DELETE with examples.
I have also read the documention of the function module. How to use this FM for custom defined condition table.
(this is the code given in Documentation)
DATA-OBJECT_REPRESENTATION = 'E'
DATA-SEL_OPT-CT_APPLICATION = 'CRM'
DATA-SEL_OPT-OBJECT_TASK = 'D'
DATA-SEL_OPT-RANGE-FIELDNAME = 'PRODUCT_ID'
DATA-SEL_OPT-RANGE-R_SIGN = 'I' (Including)
DATA-SEL_OPT-RANGE-R_OPTION = 'EQ'
DATA-SEL_OPT-RANGE-R_VALUE_LOW = 'PROD_1'
Thanks
ShankarHi Shankar,
I am using the same CRMXIF_CONDITION_SEL_DELETE function module to delete condition record present in CRM.
But it is giving me below error in the return table of the FM after i run the program. Can you please correct me if I am doing any thing wrong?
Error in lt_return: SMW3 CND_MAST_SEL_DEL_EXT_VALIDATE CND_M_SD
code:
ls_range-fieldname = 'PRODUCT_ID''.
ls_range-R_SIGN = 'I'.
ls_range-R_OPTION = 'EQ'.
ls_range-R_VALUE_LOW = '123456'.
APPEND ls_range TO lt_range.
MOVE lt_range TO ls_entry-SEL_OPT-range.
ls_data-SEL_OPT-object_task = 'D'.
ls_data-SEL_OPT-ct_application = 'CRM'.
ls_data-object_representation = 'E'.
CALL FUNCTION 'CRMXIF_CONDITION_SEL_DELETE'
EXPORTING
DATA = ls_date
IMPORTING
RETURN = lt_return
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
IMPORTING
return = lt_ret.
Edited by: Saravanaprasad Nadar on Jul 7, 2010 1:27 AM -
How to delete the deployed composite in weblogic server 11g
Can someone tell me how to delete the deployed composite in weblogic server 11g ?I'm facing an issue where the weblogic server is getting started and immediately after sometime the server changes to "Force shutdown"..When i checked the logs,there is an error in one of the composite i deployed..So now i wanted to delete the deployed composite?Please help ....
ThanksHi
1. Deleting a domain will not hold any references. But make sure that under your user_projects/applications also remove the folder that matches with your domain. Basically under user_projects folder you will see 2 folders named applications and domains. When you create a domain say mySoaDomain, it will crate a folder with the same name under applications folder also with few files like em.ear. If you do this, then you can crate a new soa domain and use the same old name.
2. NOW comes the most important thing. If you create a new SOADomain, at one point, you had to give details for soainfra and mds schemas. If you give your current existing db details (that was used for your old deleted domain), then you may still have the issues. Because the soainfra db may still have the instances for your old process.
3. If you really want to have a full clean soa domain, here is what you do:
a) Run rcu and drop the existing schemas for soainfra and mds.
b) Run rcu again and create above schemas again.
c) Now create SOADomain using config wizard and refer above clean rcu db and you are all set.
3. Under your domain root folder, just searh for files named with your workflow and you should see the .jar location.
Thanks
Ravi Jegga -
How to delete the file with space in name
Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help meUse the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls. -
How to delete the messages from SXMB_MONI which are already cancelled .
Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM
Maybe you are looking for
-
Interactive report column filters to display differently than column values
Greetings... We use images a lot in our interactive reports to provide a visual representation to a status, or something locked for update, or what-have-you. By default, when a user clicks the column heading of a column which contains images, the dro
-
Logitech wireless mouse doesn't work with Linux 3.10
When I rebooted after updating to the 3.10 kernel my mouse stopped working. The cursor is displayed but it doesn't move. I downgraded back to 3.9.9-1 and it works fine again. As far as I could see it was detecting it in the dmesg output, so I'm not s
-
What's wrong with my Properties Window?
I hope that comes up on the forum? Can you see the strange font beside the drop down boxes, it says Format and ID though its not in the standard font. Can anybody tell me why that is? Something to do with fonts missing? This seems to be the only wind
-
Calling proxy according to jms attribute in Dynamic Configuration
Hello, I have jms to proxy integration. I defined additional jms parameters in Adapter -Specific Message Attribute in JMS senderadapter. And I can retrieve this field in dynamics configuration in SXMB_MONI. Process should be continued as such: If "
-
i try to keep my thumb palms off the mouse pad when i am typing but every now and then my screen resizes larger or smaller until i take my left palm off the keyboard base its only when my left palm is resting on the base next to the touch pad. i type