How to delete the "S" in the scanned Serial Number Barcodes after it has been received?

I scanned Serial Numbers but after receiving them I noticed it contained the "S" (serial) in the serial number which isn't part of the serial number.. How can I go back in and edit the serial numbers to remove the "S"?

Hi Dave,
My first advice would be to record the S in the serial number.
But if you can't, one way to solve it would be to ask an ABAPer to implement an enhancement in function CONVERSION_EXIT_GERNR_INPUT to remove first character of serial number if it's an "S".
This is not a complete solution because you might have another serial number with a legit "S" as first character, so the programmer should limit this change as much as possible to your business case.
regards,
Edgar

Similar Messages

  • How to change the IO status to CLOSE after it has been settled through ko8g

    hi ,
    I have the following scenario : An internal order is assigned to a PO and after setllement of such an order i need to CLOSE the order .
    The PO has a GR done (no IR) . Currently Internal Order is in the status : TECO [technically complete] and setlement has ben doneusing Actual Settlemnet Run using KO8G.
    Now i need to change the IO status to  [ CLOSE ] : it is gving an error in KO02 : Balance is not zero .
    How  to change the Internal Order status to CLOSE or rather how to make teh balance in that Order toZero?
    Is it reqd to process some GR's for teh same PO ?
    Thansk
    Trina

    Hi,
    Check the order balance in Ko02
    Menu -->  Extras  -->  Order Balance if balance exist it means that the order has not completely settled.
    Regards,
    Raj

  • HOW TO CHANGE THE FINANCIAL TRANSACTION IN FM AFTER POSTING HAS BEEN MADE.

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
    HI
    IN FM I HAS BEEN POSTED ONE TRANSACTION FOR  A PARTICULAR G/L ACCOUNT.
    AFTER THAT I WANT TO CHANGE THE FINANCIAL TRANSACTION FROM 30 TO 50.
    SUGGEST ME IF ANY ALTERNATIVE WAY.
    HOW IT POSSIBLE ?
    THANKS & REGARDS
    MALA

    It's not possible with standard functionality. Create a new CI and use it instead of the one defined incorrectly.

  • How to get the iphone serial number  in application?

    hello,  everyone
       i  really want to konw how to get the iphone serial number in aplication ?  As it's different from uniqueIdentifier ....
    thank you

    Michele is correct - sneep will help you get the serial from the running domain on the M3000 ,
    and it is a good idea to install STB on your machines.
    If that isn't possible for you, then sneep can be downloaded directly from [http://www.sun.com/sneep]
    I believe that on this platform, sneep gets the serial from the output of prtconf.
    There is a minor correction to be made :
    After installed SNEEP use "man sneep" for all technical details.The sneep man page is not linked into the shared man pages, so you need to use
    man -M /opt/SUNWsneep/man sneep
    with out going to OK prompt (Banner)It is worth noting that the serial shown in the OBP banner is not the product serial
    that you will find on the physical serial tag.
    The banner "serial" is the decimal equivalent of the host ID, which you normally get in hexadecimal from the "hostid" command.

  • TS1646 I need to delete either my Itunes account or delete the credit card information because my account has been hacked.

    I need to delete either my Itunes account or delete the credit card information because my account has been hacked.

    You can't delete an account, and all of the account's downloads will remain tied to the account.
    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your phone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918
    If you haven't already done so then you may want to contact iTunes Support to let them know : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to forbid any further changes for PO (QTY and price ) after it has been

    Hi,
    How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

    Hi,
    Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
    But quantity can be changed at any time.
    So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
    Ramesh

  • HT3255 How can I log in to find my MacBook Air serial number when my computer has been stolen?

    How can I log in to find my MacBook Air serial number when my computer has been stolen?

    Check your support profile if you may have registered it there.
    Check your email - Apple typically offers to email your receipts to you.
    supportprofile.apple.com
    Message was edited by: ssschmidt

  • How to get the motherboard serial number?

    Hi
    i am writting an application which will encrypt the motherboards serialnumber and other info to do an activation of my application.
    inevitably locking my program to a specific PC.
    Does anyone know how i can get the motherboards serial number?
    I tried the wmi but get so many errors like missing prototype and not declared.
    I dont know when to start using the Windows Management Instrumentation with regards to Lab windows/CVI.
    Can anyone help me?
    Thanks
    Shako
    Help share your knowlegde

    I made up a small example that shows how to use WMI in CVI.
    Unfortunately, I tested it on two systems (Win XP and Win7) and the serial number that can be retrieved in System Enclosure (that should be the S/N assigned by the PC producer) is always blank.
    I will try to locate additional infos on this matter, in the meanwhile you may want to experiment with the example and search for other available infos (like for example OS or disk s/n) to create your own security system.
    The example can be found here.
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Back.  How do put the new serial number on my itunes?

    My ipod nano was recalled and chances are I will not get my original one back.  How do I put the new serial number on my itunes so my computer will recognize the new (refurbished) one?

    I'm not sure that you need to. iTunes will read the serial number from the new iPod when you hook it up. If you aren't talking about the iPod serial number, but instead talking about the iTunes user ID and password, keep using what you have.

  • How to get the card serial number while installing applet

    I understand that I can retreive the card serial number from CPLC data. The getCPLCData () requires APDU objects in which it is not available at installation time.
    Does anyone suggust to me how to retrieve serial number while applet installation?

    while INSTALL is running?
    I guess there is no way to do this...

  • How to validate the existing Serial number while doing the GR.

    Dear,
    When we are doing the GR, If we  given existing Serial number is  in input System is accepting and update in the existing serial number (Equipment).
    It is  throwing error when equipment is in ESTO status and Stock information is available in the equipment but  When equipment is in AVLB status without stock information in equipment it is updating in the same Equipment / Serial number and status is changed to ESTO.
    However my Requirement is system should not allow or throw error when we are give input  existing serial number while doing GR, How to do this.
    Regards
    Kishore

    while INSTALL is running?
    I guess there is no way to do this...

  • How to get the right Serial Number during Pick Release

    Please we need your help to get the right serial number => Auto-Allocate on YES, Pick Confirm with NO.
        A problem is occurring during the Pick Release process.  Custom code has been added to the hook INV_DETAIL_SERIAL_PUB to provide the Pick Release process with the serial number to pick for the item being pick released.  The hook works and the Pick Release process picks the correct (specified) serial number.  However, at some point later in the Pick Release process the lot number is chosen and the process seems to pick the first lot number it finds available for the item – it does not take into account the serial number provided by the hook.  This causes the Pick Release process to fail when the lot number chosen is not the lot number linked to the serial number.  Has anyone else encountered this same issue?
        An example:
    Item ABC123
    Serial SER001 – Lot LOT001
    Serial SER002 – Lot LOT002
    Serial SER003 – Lot LOT003
    Item ABC123 is being pick released.
    The customised hook provides the Pick Release process with serial SER002.
    The Pick Release process correctly uses SER002, but chooses lot LOT001.
    thanks!
    Francisco

    Hi,
    I guess you have added the code at slightly different place.
    Pick Release Process will always allocate lots based on Inventory Picking Rule (or WMS Pick Strategy if you are using WMS).
    So if you want to override that you much first delete the MTLT record (inv_trx_util_pub.delete_lot_ser_trx), then insert MTLT with your Lot number (inv_trx_util_pub.insert_lot_trx)..then insert MSNT (inv_trx_util_pub.insert_ser_trx) with your serial number.
    Ensure that transaction_temp_id on MSNT should match with SERIAL_TRANSACTION_TEMP_ID on MTLT table.
    Thanks,
    Hrishi

  • How to delete the spool request number

    HI Masters,
                My program creates a spool request. And i want to delete that spool request number? How to delete that??
                  Thanks in advance.

    hi
    good
    The program are RSPO0041 or RSPO1041.
    This is handy whenever you encounter a user who managed to create a lot of spool requests which are choking your system.
    Deleting them with SP01 will be too slow and you will get time out if it exceed the online time limit specify by your basis people.
    <b><REMOVED BY MODERATOR></b>
    thanks
    mrutyun^
    Message was edited by:
            Alvaro Tejada Galindo

  • HT4759 How can I find the serial number toy device that has been stolen? I have looked in my account on iTunes and go to manage devices but only option is to delete that device?

    My daughters iPod was stolen today and I disabled it and tracked it on the find iPhone to an address but law enforcement can't do anything yet since they have now turned the iPod off which means it's off the radar now but for the life of me I can not find the serial number in my iTunes account to give the investigator so that he can put the info into a data base for pawn shops. Help???

    Try here >  How to find the serial number of your Apple hardware product
    I hope you find it.

  • How long does the newest update take? My Mac has been installing for over an hour. Don't know what to do?

    Installing the newest update for mavericks. Has been installing for over an hour. Don't know what to do. How long should it take?

    I went to Apple Chat and they lead me through a power down and start up with Recovery Disc Utility (Hold down  Apple and R keys when powering up).
    Then was instructed to run Disk Recovery and it showed HD was error free. Then a reboot started up fine to desktop and showed update to 10.9.2 had been installed. I am guessing the internet connection my have been interrupted during the install.
    Apple Chat folks are awesome and a short wait too.

Maybe you are looking for