How to delete the Time Evaluation Result in the CLSTB2

Hello,
does anyone know how to delete the time evaluation result in the CLSTB2?
thanks.

Hi Ling,
SE38
program RPUP2D00
Relation Id is B2
in sort field give pernr
tick the check box of delete.
password is your id (ex : saphcm)
Regards,
Harsha

Similar Messages

How to delete the payroll result by batch? have any program to do this?

Hi，
how to delete the payroll result by batch? have any program to do this?

With standard payroll deletion (PU01), SAP will not allow payroll results to be deleted if it already reaches certain steps of payroll process (e.g. Pre-DME, DME); instead, you would have to do payroll a void or payroll reversal. This utility doens't check for that, and only delete payroll results based on the criteria given. This therefore could cause inconsistency in production if your payroll process already surpasses certain steps.
Rgds.

Does any one know , how to delete the others in itunes. it takes lot of space

does any one know , how to delete the others in itunes. it takes lot of space, i wanna delete that... Actually what it contains

Those are the data of the installed apps. Don't listen if someone says that it's an iOS, because it is not. On your iPhone, go to general > usage. It will show you all the programs installed on your iPhone. If you click any of them you will see how much of "others" it has (documents and data)
There's no way to delete it if you want to still have those apps. You can reinstal those which has the most "others" but after some time of usage, it will raise again.

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

How to delete the data in the compressed infocube

hi, bi gurus
we are facing a problem in inventory management the info cube in BW production
normally every time inventory cube gets compressed that means the data will be moving to F fact table to E fact table
now the problem is we are having some bad data for latest five requests in this cube as we all know compressed data
can't be delete by deleting request in the request tab the only way is go for selective deletion but i don't find any selective
option in the cube we are PSA data for that five request which having correctdata please help how to delete the bad data in the
info cube and load the correct data which we are having in PSA
Thanks
Joe

Hi André
Thanks you for ur answer
what i am telling is their is an option for selective deletion for inventory cube
but i don't find any specific option to delete the data that means like calendar day like that
i hope you got my question.
hi Saveen Kumar,
Thank you again
we are using 3.xx flow if we do the request reverse posting for all the 5 requests which has updated incorrect data
next we need to do compression also or not
and how to reload the data from PSA to Infocube becuse if request still avaliable in info cube it will not allow me to do that
can you please tell me detail how to proceed in step by step this is first time i am doing request reverse post and i have to do it production please tell me
Thanks in adavance
Thanks,joe

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to delete the ID in iTune Apps Stored which is not mine ? TQ

How to delete the ID stated in Itune Apps Store which is not belongs to me.

Go back to Settings> Store and make sure your correct Apple ID shows. If not, sign out and sign back in with the correct one. Just to make sure it is saved in your phone. Then do a reset on the phone (power button and home screen button at the same time until the screen goes black and the apple icon shows back up on the front of the screen)

How to delete the trailng zeros in my table

Hai
I had a serious problem
My table name called nrgp_main
Here nrgpno declared as char(8) i had changed as 10 by mistake and i have update two times
the number is like this 003800001 i need to cut the first '0' and update it
Thanks & regards
Srikkanth

Duplicate post
how to delete the trailng zeros in my table

IMP: How to delete the service order

Hey Experts,
Can you tell me how to delete the service order which was created in IW31..? or we have any Functions Module to delete the service order?
and one more question is I have more than 100 service order in the table ,but it will display only 50 order when i execute this Functions Module BAPI_ALM_ORDERHEAD_GET_LIST
can you tell me how to solve this problem...?
Thanking you in advance,
Regards
J Sarathi

This is what the BAPI_ALM_ORDERHEAD_GET_LIST documentation says
"You can use this method to determine a list of orders according to a list of selection criteria. The number of hits that are produced for the person calling up the list, can be specifically reduced; without further parameter transfers, the first 50 hits are displayed. A complete list of the hits is stored internally. If you call up the selection again within a Logical Unit of Work (LUW) without changing the selection parameters, but with other refurbishment parameters, then you receive further partial quantities of the selection result, as specified by you."
and for deletion
check whether you can set any deletion status through the fm BAPI_ALM_ORDER_MAINTAIN
Also check the business objects BUS2007, BUS2088

*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*

HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
J

Setting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM

How to delete the record of saved HRA Details...

Hi Experts,
I have put the details of HRA Correctly.But while updating HRA In 0008 Infotype i wrongly updated the wagetype,How should i change the Wagetype.
When i m trying to delete it is showing RECORD CAN NOT BE DELETED (TIME CONSTRAINT 1).
How can delete the record.
Thanking u .
Sai

Hi
Hope doing well ........ No need to delete any infotype but u can go to PA30 and in change mode their u can delete the wagetype which is wrongly entered
Rajeshk

How to delete the saved score in a game downloaded from app store for my macbook and restart the game from the beginning ? please help

HOW to delete the saved score in a game downloaded from the app store to restart the game from the begining with fresh scores.
i am unable to do so. please help

In system preferences, create a new account again, using the short name of the "deleted" account. You may be prompted to re-use the old home folder. Log out and log in to test it worked. Then log in as your new admin, and do the delete process again. Don't choose to securely delete this time - just a regular delete.
When you have time to spare, go to Disk Utility, and use the Erase tab to securely erase free space on the drive. This will accomplish the same thing that your originally tried to do. Use the fastest method - anything more secure is a waste of time. You may need to run it overnight - it can take several hours.
Matt

How to delete the history shown in the URL bar?

I just deleted the Browsing history to get rid of all the very old suggestions the URL makes.
It doesnt help.
The URL bar shows automatically even pages I havent visited for a year.
I think there is a lot of old stuff accumulating I want to get rid of.
So, how to delete the browsing history so that also that naggy URL bar starts with a clear slate?

I don't know if this is the same thing, but I had the problem of clearing my history and the location bar would show URL's that I hadn't gone to in a long time. I think most of them had the yellow star to the right of the address which was supposed to mean they were bookmarks. However, I had never bookmarked these sites. My solution was to go to Bookmarks->Organize Bookmarks. Expand "Bookmarks Menu" on the left side and go to "Recently Bookmarked". In there I deleted everything that I didn't want as a bookmark. Now the sites no longer show up in the location bar. Hope that helps for you or someone.

How to delete the downloading items in itunes?

how to delete the downloading items in itunes?

Unfortunately, this doesn't work. If you let them download and delete them, they just download again at some point in the future. I've been trying to figure this one out myself, but so far, every time I remove something, it comes back "later".
Steve

How to delete the Time Evaluation Result in the CLSTB2

Similar Messages

Maybe you are looking for