How to deregister PORTLET PRODUCER manually?

I had an error during deregister my portlet producer, so now it is not in my project, but somehow local oc4j knows about it. When I try to start executing my project, my explorer's page tells:
mdsId=/oracle/adf/portlet/TutorialProducer_1176222275748/ap/E0default_dc50ae93_0111_1000_8002_c0a81ea65759.pxml not found
TutorialProdecer - is the name of my portlet producer which I've failed to deregister. How should I manually delete the information about this producer?
Once I've been working whith stand alone OC4J, I had similar problem when incorrectly tryed to undeploy my applications, so they where physically deleted wrom /applications folder, but information about them still remained, and I should manually delete it from .xml files. Is there similar way to deregister protlet producer from jdev's oc4j?

Hi,
it's not quite clear to me what the problem is. Do you want to clean up orphaned entries in the producer registration section? Then, in deed, you should try to unregister the producer by right clicking on it and de-registering it.
Do you have problems with deployed producer application on your OC4J and you want to clean up the container? Then you need to clean up the default-web-site.xml and server.xml. (config folder of your OC4J) Also you should look for fragments on the file system (folders of the deployed application ).
You can then look for producer entries in the connections.xml. It is also recommended to close and restart the JDeveloper after this.

Similar Messages

Error on deploying Portlet Producer Application

Hi All,
I am trying to create a very simple Portlet Producer Application in JDev 11.1.1.4 but I am unable to deploy it with my
integrated weblogic server. The error says.
49192]Operation 'deploy' on application 'HellowWorldPortlet' is in progress on 'DefaultServer'
[02:22:04 PM] [Deployer:149193]Operation 'deploy' on application 'HellowWorldPortlet' has failed on 'DefaultServer'
[02:22:04 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application HellowWorldPortlet on DefaultServer.: :oracle.mds.exception.MDSExceptionList:MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "WebCenterFileMetadataStore" is invalid.
MDS-00503: The metadata path
[02:22:04 PM] Weblogic Server Exception: weblogic.application.ModuleException: :oracle.mds.exception.MDSExceptionList:MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "WebCenterFileMetadataStore" is invalid.
Any hint what is causing this?
Also, how can I view the logs of the integrated web logic server?
Thanks.

Hi
Check your prot no is correct or not, if problem still exits then restart your server.
Thanks

How to load portlet css by myself defined.

for example:
I creart myCSS.css,I used it by html include tag,like:
<link type="text/css" href="<%=request.getContextPath()%>/css/myCSS.css" rel="stylesheet" />
at fact,it doesn't work,just load weblogic css file
when i maximize the portlet,after manually refresh this page,then load myCSS.css.
why?I don't understand.
does anyone hit this issue before?kindly let me know,thank you very much.
aris

The . means start the search relative to the . dependencies file , so the path you specify in href must resolve relative to that
Suppose your folder structure is
TestPortal
  resources
    yourdepenciesfile.dependencies
    css
      demos.css
Then you would specify (the search path element means start in folder css relative to where the file is and the href is then searched beginning from there)
<search-path>
<path-element>css</path-element>
</search-path>
<link rel="stylesheet" type="text/css" href="demos.css" />
Your Css file cannot be under WEB-INF it must be under a location that can be reached by the browserAll The framework will do when the file is found is print the following in the <head> section
<link href="/TestPortal/resources/css/demos.css" ...
which the browser will then try to download. If you keep your css file in WEB-INF then the browser will request for the file, but the server will refuse to serve it (since it doesnt serve any file under WEB-INF)
and I added xmlns="http://www.bea.com/servers/portal/framework/laf/1.0.0"
you have to add xmlns:p="http://www.bea.com/servers/portal/framework/laf/1.0.0" i.e. you are binding the prefix 'p' to the namespace specified. Read up on XML namespaces if you have a problem with the above. Your xml works because you have defined the default namespace to be the correct one , but it always helps to know how something is working. If you add xmlns:p then you need to add p: to the elements, if you define it as default you dont need anything else. As before read up on XML namespaces
Edited by: deepshet on Jun 15, 2009 6:59 PM
Edited by: deepshet on Jun 15, 2009 7:00 PM

How do I automatically or manually add incoming e-mail addresses to my address book?

How do I automatically or manually add incoming e-mail addresses to my address book?

Automatically? Really?? All addresses of all senders just sucked into the address book, spammers, advertisers and all?
Where an address appears in the panel above the message text, there is a star alongside it. Click this star to add the address to your Address Book. Once you have done that, you can click the star again to edit the address book entry.
Note that if the star is empty/grey (silver?) the contact is unknown. If the star is filled/yellow (gold?), the Contact is already in your address book. (This is very like the way bookmarks are managed in Firefox.)
If you really want all senders' addresses entered indiscriminately into your address book, this add-on may be of interest.
https://nic-nac-project.org/~kaosmos/index-en.html#addrcollector

How to Load a class manually

Hello Friends,
I need a help regarding how to load a class manually.
i have the class name -- TestClass1
and Path - com.apps.classes
Thank you

Thank You------
I got the result
String classPath = com.apps.className;
Object obj = Class.forName(classPath).newInstance();

How to send the data manually

Hi Experts,
I need small information.when messages are gone into queue state due to one message
When an EDI file came into wrong format and with that some messages are gone into queue state in MONI.
if i cancel the first message then remaining all the messages are processing successfully.
So from that cancel message i want sent the data manually as business needs that data.
Can all please tell me how to send the data manually with steps.
Thanks in Advance.
Bhaskar

Hi,
I think you are talking about QoS "EOIO", in which all messages are porcessed in FIFO order and whenever the preceeding message get stuck due to error in the queue, then all the messages are stoped. And yes as soon as you will cancel the message which went into error all the remaining messages will automatically will be delivered.
In my opinion since QoS is EOIO then it will be not possible to sent the data mannually, you can do one thing, do not cancel the message. Try to correct the messge and then resend it.
Regards,
Sarvesh

How can i move photos manually in iPhoto

how can i move photos manually in iPhoto

This seems to be a recurrent problem. There is no very simple way to move a photo within an Event. However, the following (which I have not seen posted anywhere) works without needing to go to Albums, and is not too laborious for a few photos:
Go to Events in the menu on the left, under LIBRARY.
Select your event.
Highlight the photo you want to move, then go to the menu bar at the top of your screen (not window) choose Photos > Adjust Date and Time.
Adjust the date and time to get the photo to appear at the postion you want (sorry, you'll need to check the dates and times of the photo one side of where you want it to go first). Do this and your photo should move to the new position, defined by its new date and time.

No "Portlet Producer Application" in JDeveloper 11G

Hi Everyone;
I have been asked do some WSRP portlet development for Weblogic. following this tutorial, I donwloaded JDeveloper 11g. However there is no "Portlet Producer Application" option under "New Application".
What am I doing wrong?
Regards
Gerhard

Hi,
se the Important Note in the web of product. http://www.oracle.com/technetwork/developer-tools/jdev/downloads/index.html
your JDev version not include SOA and Webcenter Extensions
you'll need to download Oracle JDeveloper 11.1.1.6.0.

How to take a backup manually in oracle 11g express edition?

how to take a backup manually in oracle 11g express edition? i want to take backup of a database and want to restore later on on a different computer .

Stop database, and copy all files to another machine.That sounds to me to be the closest answer to the question posted. And perhaps the easiest solution.
Install XE on the "another machine", shut it down. Shutdown the source database. Copy the datafiles to the new host. Startup your "new" database, it will be an exact clone of the original.
To find out what files need to be copied, as system (or sysdba) run:
select name from v$datafile;
... file1, file2 ...
show parameter control
... control_files ... file1 ...
alter database backup controlfile to trace [reset logs];
show parameter diag;
... diagnostic_dest ... <drive:>|/diag_pathTo do a proper database clone its better to recreate the controlfile and reset the archive sequence number- leave out the controlfile copy part. In the diag_path location find the trace file under diag/rdbms/$ORACLE_SID/<db_name>/trace it should be the latest ora*.trc file.
The trace file has the commands to recreate the controlfile, which includes the datafiles and putting the tempfile back in place. If the datafiles are in a different location, i.e. in Windows going to a different drive, or you want do put datafiles in a different folder location, the create controlfile statement is the easiest time to get the file directories right.
If you add the "reset logs" qualifier (don't use the brackets!) you'll get just the reset logs version of the create controlfile statement, otherwise you'll get both NORESETLOGS and RESETLOGS versions of a create controlfile statement, run one or the other. Not both. Not the entire trace file, just the create controlfile, alter database open [reset logs], alter tablespace temp add tempfile ... bits. No recovery is needed for a database that is shutdown when datafiles get copied to a new location/host.

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

I am selling my apple mac pro but do not know how to deregister and register it to the new owner; how do you do this?

Before you sell or give away your computer, in addition to the steps mentioned in this support article, take these steps:
Run Apple Diagnostics or the Apple Hardware Test. The buyer will do this (or he should), and you don't want to be surprised by the results.
Reset the PRAM and the SMC, which might contain personal information.
If you set a firmware password, remove it by running Firmware Password Utility in Recovery mode.
If you activated FileVault in OS X 10.7 or later, turn it off.
If you use Boot Camp, the partition must be deleted
If you created any other data partitions on the internal drive, remove them in Disk Utility.
Erase the data partition(s) with the option to zero out data. An SSD doesn't need to be zeroed.
You can't legally or practically transfer any software downloaded from the Mac App Store to the new owner of the machine, even if it was free. That includes OS X, so if you upgraded to OS X 10.7 or later, you must reinstall an older OS, either from the installation media, if applicable, or by booting into Internet Recovery (option-command-R at the startup chime.) If you installed from physical media, deliver those to the new owner.
If you're selling the machine, or donating it in working order, and it originally shipped with OS X 10.4 or 10.5, then you have the option of installing either from the discs that came with it or from a retail Snow Leopard disc (which you must then transfer with the machine.) The buyer should understand that if he doesn't get the original discs from you, he won't get the bundled iLife applications or the Apple Hardware Test. Replacements for the original discs can be ordered from Apple.
The new owner will have to redownload any software that came from the App Store, including OS X upgrades, under his or her Apple ID. If you ever updated the bundled iLife applications (Garage Band, iMovie, and iPhoto) through the App Store, you can't transfer those either.
Remove the machine from your list of registered products. If it's still covered by an AppleCare Protection Plan, transfer the coverage to the new owner by following the instructions in the AppleCare Terms and Conditions (under the heading "Transfer of Plan.")

Old machine crashed. how to deregister adobe acrobat on old machine?

old machine crashed. how to deregister adobe acrobat on old machine?

You can't if you don't have physical access to it. Just install it on the new machine and if you have problems with activation call the number for your country and explain the situation to them. They should be able to help you out with it.
PS: This is the Adobe Reader forum. The Acrobat forums are over here: http://forums.adobe.com/community/acrobat

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this.

Captivate 8 - How to change to producing "project.json" file instead of a "project.txt" file? Having issues with viewing published projects due to this. Would be thankful fo rany/all advice.

I'm having the same issue. I've been able to work around it by opening the txt file and copying the contents. Then I open a new file in Sublime Text 2, paste the contents and save the new file as "project.json". It seems to work, but it'd been nice if I didn't have to do this everytime I publish a new project.

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

How fast does Apple produce new RAW files for new cameras? I want to buy a D7100 wich is not supported in the present version?

Jeannot7 wrote:
I'm interested in seeing who gets the D7100 support first? Apple or Adobe!! I will go with the one that gets it out first.
FWIW,
Adobe keeps a quarterly release schedule for RAW updates. The current Lightroom 4.4 RC expires on 5/31/2013 which typically is an indication that the official release will be close to that date. According to the current list of new supported cameras, the Nikon D7100 is not slated to be supported (but that could change on release).
http://labs.adobe.com/technologies/lightroom4-4/?tabID=details#tabTop
The most likely time frame for Adobe support of the D7100 will be sometime in August or September 2013 (although there will probably be a Lightroom 4.5 RC available prior to that for testing purposes).

How do i get a manual for lion? Cant seem to find one anywhere.

How do I get a manual for Lion. All previous versions of Mac OS X have manuals, including Apple hardware, however this version of Mac OS X, seems to not have one.

http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=lion%20shortcuts

Error in peoplesoft portlet producer connection

Hi,
I am trying to connect to a peoplesoft portlet producer fron Jdeveloper. But while creating connection I am getting following error:
oracle.portlet.client.container.PortletRemoteException: WSRP producer responded with an error (OperationFailedException).
at oracle.portlet.client.connection.wsrp.WSRPProducerInteractionHelper.getRegistrationProperties(WSRPProducerInteractionHelper.java:282)
at oracle.portlet.client.connection.wsrp.WSRPProducerInteractionHelper.getRegistrationProperties(WSRPProducerInteractionHelper.java:221)
at oracle.portlet.client.connection.wsrp.WSRPProducerInteractionV1Impl.getRegistrationProperties(WSRPProducerInteractionV1Impl.java:87)
at oracle.portlet.client.connection.wsrp.WSRPProducerConnection.getRemoteRegistrationProperties(WSRPProducerConnection.java:447)
at oracle.portlet.client.connection.wsrp.WSRPProducerConnection.getAvailableRegistrationProperties(WSRPProducerConnection.java:421)
at oracle.portlet.client.connection.wsrp.WSRPProducerConnection.getAvailableRegistrationProperties(WSRPProducerConnection.java:387)
at oracle.adfinternal.model.portlet.manager.ProducerConnectionManager.createWSRPProducerConnection(ProducerConnectionManager.java:358)
at oracle.adfdtinternal.model.portlet.wizards.registration.wsrp.WSRPProducerRegistrationWizard$4$1.doWork(WSRPProducerRegistrationWizard.java:1618)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:161)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.portlet.server.container.OperationFailedException: oracle.portlet.wsrp.v1.OperationFailedException: Failed to load the ServiceDescription from persistent store. (3001)
at oracle.portlet.wsrp.v1.ServerToWSRPv1.getServiceDescription(ServerToWSRPv1.java:799)
at oracle.portlet.client.connection.wsrp.ActivityServerWrapper.getServiceDescription(ActivityServerWrapper.java:78)
at oracle.portlet.client.connection.wsrp.WSRPProducerInteractionHelper.getRegistrationProperties(WSRPProducerInteractionHelper.java:233)
... 10 more
Caused by: oracle.portlet.wsrp.v1.OperationFailedException: Failed to load the ServiceDescription from persistent store. (3001)
at oracle.portlet.wsrp.v1.WSRP_v1_ServiceDescription_PortTypeJaxbToSoap.getServiceDescription(WSRP_v1_ServiceDescription_PortTypeJaxbToSoap.java:75)
at oracle.portlet.wsrp.v1.ServerToWSRPv1.getServiceDescription(ServerToWSRPv1.java:121)
... 12 more
Caused by: oracle.portlet.wsrp.v1.soap.OperationFailed
at oracle.portlet.wsrp.v1.soap.runtime.WSRP_v1_ServiceDescription_PortType_getServiceDescription_Fault_SOAPSerializer.deserializeDetail(WSRP_v1_ServiceDescription_PortType_getServiceDescription_Fault_SOAPSerializer.java:80)
at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserializeSOAP11(SOAPFaultInfoSerializer.java:133)
at oracle.j2ee.ws.common.encoding.SOAPFaultInfoSerializer.doDeserialize(SOAPFaultInfoSerializer.java:95)
at oracle.j2ee.ws.common.encoding.ObjectSerializerBase.deserialize(ObjectSerializerBase.java:194)
at oracle.j2ee.ws.common.encoding.ReferenceableSerializerImpl.deserialize(ReferenceableSerializerImpl.java:148)
at oracle.portlet.wsrp.v1.soap.runtime.WSRP_v1_ServiceDescription_Binding_SOAP_Stub._readBodyFaultElement(WSRP_v1_ServiceDescription_Binding_SOAP_Stub.java:159)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:148)
at oracle.portlet.wsrp.v1.soap.runtime.WSRP_v1_ServiceDescription_Binding_SOAP_Stub.getServiceDescription(WSRP_v1_ServiceDescription_Binding_SOAP_Stub.java:80)
at oracle.portlet.wsrp.v1.WSRP_v1_ServiceDescription_PortTypeJaxbToSoap.getServiceDescription(WSRP_v1_ServiceDescription_PortTypeJaxbToSoap.java:67)
... 13 more
can anyone suggest me where is the fault
Regards
-Arvind

Hi, the WSDL provided can't be viewed in the browser either.
I can only view "*http://localhost:7101/"* as soon as I add "*Products/portlets/wsrp2?WSDL*" I have a problem
What could I be doing wrong??
kind Regards
Thabo

How to deregister PORTLET PRODUCER manually?

Similar Messages

Maybe you are looking for