How to design and have universal color correctness?

I designed a label using Illustrator and Photoshop, but when I got it printed, the color came out different than the onscreen visual. How can I avoid having to adjust everything? I want to be able to take it anywhere and print it and it come out how I designed it.

Hi Saravanan,
In your view, you have to add the UI element TabStrip. You will have an empty tab strip then. Right click on the tab strip, and add a 'Tab'. Continue in this manner to add as many tabs as you want. Each tab will have a header, specify the tab title in that.
Now go to each tab, right click and insert element. You could insert any element like a table, Input fields etc. Event handling has to be done separately for these elements. At the tabstrip level, you need to handle only the onTabSelect event. This is the event triggered when you change tab selection in the tabstirp. In the properties of the tab strip, there will be a field selectedTab. Specify the ID of the tab which you want as selected. This will be your initial selection.
You can also enable and disable tabs, say grey out tabs that have no data etc. All this can be done by context attribute binding.
You can also refer to the view  by name TABSTRIP in the component WDR_TEST_EVENTS.
Regards,
Uday

Similar Messages

  • I'm converting a word doc to a pdf and have a color spin wheel - going on 10 min now. any clue as to why? or how i make it stop?

    I'm converting a word doc to a pdf and have a color spin wheel - going on 10 min now. any clue as to why? or how i make it stop?

    Hit command tab and swtich to the Finder, under the Apple menu is Force Quit, do that to the program that is causing your "hang" and restart the program and what you were doing.
    If you didn't save your file beforehand, then your going to have to make it again.

  • How to design and use tabstrip in webdynpro

    hi,
         i trying to design tabstrip in webdynpro(SE80), i dont know how to design and use it. if u have screenshot or any other document give me. its pretty useful for my requirment. guide me

    Hi Saravanan,
    In your view, you have to add the UI element TabStrip. You will have an empty tab strip then. Right click on the tab strip, and add a 'Tab'. Continue in this manner to add as many tabs as you want. Each tab will have a header, specify the tab title in that.
    Now go to each tab, right click and insert element. You could insert any element like a table, Input fields etc. Event handling has to be done separately for these elements. At the tabstrip level, you need to handle only the onTabSelect event. This is the event triggered when you change tab selection in the tabstirp. In the properties of the tab strip, there will be a field selectedTab. Specify the ID of the tab which you want as selected. This will be your initial selection.
    You can also enable and disable tabs, say grey out tabs that have no data etc. All this can be done by context attribute binding.
    You can also refer to the view  by name TABSTRIP in the component WDR_TEST_EVENTS.
    Regards,
    Uday

  • How to design and develop Cost center with SAP BPC 5.1 ?

    Hi all,
    Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
    Thanks,
    Sandy

    Hi Sandeep,
    1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
    2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
    3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
    4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
    5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
    6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
    Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
    regards
    shyam

  • How to design and list out in ascending order from minimum to maximum with 6 inputs

    hi,
    How to design and list out in ascending order from minimum to maximum with 6 inputs in Labview? 
    This is easy to write it in C++, but not in Labview,may be I am new to Labview. i manage to get the 1st and the 6th after compared, but i cant get 2nd, 3rd, 4th, 5th.
    and can i write c++ language in Labview VI ?
    thanks.
    Solved!
    Go to Solution.
    Attachments:
    24-1-2012 display 4.vi ‏7 KB

    Try this:
    Beginner? Try LabVIEW Basics
    Sharing bits of code? Try Snippets or LAVA Code Capture Tool
    Have you tried Quick Drop?, Visit QD Community.

  • Officejet Pro 8000 A809 - can I print just black and have empty color cartridge?

    I saw in a previous post entitled "PSC 1410 - can I print just black and have empty color cartridge"
    that the printer does color underprinting even when printing black and white, to prevent bleeding.
    My question is, is this also true when selecting the grayscale printing option in the printer properties dialog box?
    I installed the printer using an ethernet connection to a Dell Inspiron 8200 laptop computer running Windows XP Professional

    Yes you will still need the color cartridge.  The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • How to design and implement an application that reads a string from the ...

    How to design and implement an application that reads a string from the user and prints it one character per line???

    This is so trivial that it barely deserves the words "design" or "application".
    You can use java.util.Scanner to get user input from the command line.
    You can use String.getChars to convert a String into an array of characters.
    You can use a loop to get all the characters individually.
    You can use System.out.println to print data on its own line.
    Good luck on your homework.

  • How to remove and change the color of Java cup and border

    Hi to all,
    How to remove and change the color of Java cup and border.
    Thanks in advance
    khiz_eng

    This is just an Image. You would need to create your own image and call setIconImage(Image) on your JFrame.

  • My phone damage my housing  how to change ,and have warranty

    my phone damage my housing  how to change ,and have warranty

    The warranty is voided by physical damage to the phone. You can get an out of warranty replacement from Apple in countries where it's offered for US$269. Make an appointment at the genius bar of your local Apple Store or contact Apple Care.

  • Copy and Paste Single Color Correction

    I'm trying to copy and paste a single color correction to the rest of the clips in the timeline and run into a problem.  I've tried to disable the other color corrections before copying but all that does is paste the unchecked correction also.  I've tried deleting the other corrections before copying but that likewise deletes all the previous corrections in the clip that I paste to.  So in other words, no matter how I configure my color corrections in the clip that I copy from, the exact same configuration is what gets pasted into the paste clip.  Surely there is a way to copy a single color correction when dealing with clips with multiple corrections?  My protocol is to adjust contrast on one correction, color balance on another and now I want to add a tint to a number of clips with out having to write down the color parameters and individually make the adjustments in maybe 70 or 80 clips.  Thanks for any insights.  Oh yeah I'm using FCPX 10.1.1

    You don't.  In the PRIMARY and SECONDARY rooms, you can save grades.  Park your playhead on a clip, hit SAVE. Those grades will show up no matter what project you open in Color. 
    What I do is make folders for every project, and save my shot grades in there.  I can then apply it to another project, if I have the need.  When working on a reality series, I often have the need.

  • How to design a optimized universe from SAP BEx queries

    Hi Team,
                  I would like to know some of the queries :
    1.How can you design a optimized universe from SAP BEx queries in the sense which gives you more performance
    2.What are the differences between Non SAP sources like Oracle,SQL and SAP sources in designing the Universe.
    3.Can we create a Derived table from an SAP source because i know that the Schema is not created for BEx queries,cubes.
    4.What are the advantages of having oracle as a source then SAP source.
    Can you please elobarate the above queries.
    Regards,
    Pradeep P.

    Hi,
    1. Check Ingos Blog on SDN ther are some PDF for performance regarding WebI on BW
    2. On RDBMS Source you have to design your universe. On OLAP Source like BW you generate the Universe and cant customize it a lot.
    4. Good question. In a BW all your logic is already in place. On a RDBMS you have to build your logic in a universe. But there are a lot of differences.
    Regards
    -Seb.

  • How do I apply multiple secondary color corrections?

    how do I apply more than one secondary color corrections to one clip?
    I know there are upto 7 tabs in the secondaries room, but when i do more than one, the change only applies in the tab i am currently in. how do i combine 2-3 tabs of effects to a same clip and export?

    Perhaps you could provide a bit more specific information about the types of clips you are grading, and the effects you are applying in your secondaries.
    The more information you provide, the more information we have to help troubleshoot your problem.

  • AJA Xena LS and Premiere CS4 color correction

    Is anyone using the AJA Xena LS with Premiere Pro CS4?
    I have a problem with color correction and it appears that the Xena card could be the reason for it.
    When I apply a color correction to a clip, the color correction takes effect only as long as the left mouse button is pressed but doesn't retain the correction once the LMB is released (see my previous post "CS4 video effects" for more details).
    Any input (other than the help already provided in the "CS4 video effects" post) will be appreciated.
    Thanks!

    This problem was solved with the new Xena drivers released 09-04-09.
    New problems occurred, but they are specifically AJA related.

  • FCP and negative film color correction?  Any experience?

    Hello There,
    I'm running into more and more low budget filmmakers who are trying there hand at making short films in Super 8 movie film (yes, it's still around believe it or not). Kodak has two new film stocks out for Super 8 and one is 200T and the other is 500T (both cut down from their pro 16mm and 35mm pro stocks).
    When these filmmakers get this stuff developed they don't have the money to have it transferred at a pro shop so they are using equipment made by a company in Texas that does a very good job at transferring the film, but it doesn't have the adjustments needed to make negative film look the way it should.
    I know a few people who color correct it with FCP and FCE and they can actually make it look fairly good.
    My question is: is there a plug in or other software that can be used that is meant to do this? Or does anyone have any experience on this site with color correcting negative film with FCP? If so, what filters do you use?
    Any thoughts or comments would be great to hear from. Remember, I know this can be done by the big players, what I want to know can it be done with FCP and still look fairly good?
    Thanks for your help,
    Mike

    Well, this is pretty easy. Just throw a CHANNEL>INVERT on the negative footage before you color correct. You might have to do that before you even begin editing, as that turns the negative image into a positive one. It isn't Real Time though, so you'll have to render all the time...every cut. Unless you add the filter an export a self contained QT Movie of each tape. But then you lose time code.
    So why do they do this again? Cheaper...OK. Ease? Not really.
    Shane

  • How to animate and have the background stay the same.

    Hello, I don't post much. But I have a question that's bugging me. I want to create an animation and have the background stay. How do I do this? I have tried locking the object and puting it on its own layer, but it doesn't work. Animating in AI is new to me.

    How, exactly, are you "animating"?
    If you are exporting Layers to SWF Frames, the export dialog provides a field in which you can select a specific Layer to serve as a static image. See online Help.
    JET

Maybe you are looking for

  • Sales orders by batch

    Is there a standard SAP report where I can pull sales orders by a specific batch.  If we need to do a recall on a particular batch we would need to find all sales of this batch.  If there is no standard report to accomplish this, is there a sales rep

  • Old AirPort Express disappears

    Using several AirPort Express points to stream music to different areas of the house. The old one disappears - believe this is ever since I upgraded to AirPort Utility 6. I get a message that this version of the Airport Utility does not support the o

  • Trigger a workflow from ABAP Webdynpro

    My Scenario: Step 1: When a user hits the SAVE button on the webdynpro form, check if that data is consistent only and trigger a message(I have a BAPI to handle this check). Step 2: If the data is consistent, then trigger a workflow to send an alert

  • N73 Contact List

    All my contacts are sorted in 'surname:first name' style. When I am searching for a number I access contacts then hit keypad letter of required surname to go straight to that section...however.......the n73 always starts the list with any contacts th

  • Reinstalling CS5 on a new computer

    I have been using CS5 Master Suite on my older laptop for over 5 years now.  No problems.  I recently bought a new laptop and want to transfer my CS5 master suite.  I have lost the disks.  However, I found the install for CS5 Master Suite Via and old