How to design and implement an application that reads a string from the ...

How to design and implement an application that reads a string from the user and prints it one character per line???

This is so trivial that it barely deserves the words "design" or "application".
You can use java.util.Scanner to get user input from the command line.
You can use String.getChars to convert a String into an array of characters.
You can use a loop to get all the characters individually.
You can use System.out.println to print data on its own line.
Good luck on your homework.

Similar Messages

HT2474 I have an application that cannot be removed from the dock. It is not the finder or the trash icons. I cannot place it into the trash can either. Any suggestions?

I cannot get rid of an icon on the dock. It is not the finder and it is not the trash. I tried sending it to the trash can, unsuccessful. Tried taking it away from the dock without succes either. Suggestions?

What is the application?
Place your cursonr on it and wait. A little pane will come up to tell you what the application is

HT4623 how to i install update on ipad that was downloaded directly from the web ??

greetings everone
please i downloaded the recent upade directly from my web browser as my internet was always tripping up when using itunes. Now that i have finished downloading it I don't know how to install it please I need your help

On your computer's iTunes press and hold the shift key if youa re using Windows (command key on Mac) when clicking the Check For Updates button on the Summary tab and should let you navigate to the downloaded file.
But first you may want to copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.

I live out in the county where WiFi is not available. I don't have internet either. I have purchased the ipad2 and have been told that I can print from the ipad2 directly to the HP Officejet Pro 8500A eprint all-in-one. Is that true?

I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.

kathyfrompalmyra wrote:
I would like to be able to print from my ipad2 or my iphone4 directly to a wireless printer. I don't have WiFi at home or internet. I am able to get my emails and use the internet thru both these at home. Will I be able to use them to print? Any suggestions which printer? I was told that the HP OfficeJet Pro 8500A eprint all-in-one should work and wouldn't have to use a router. I don't want to go purchase this and try to set it up if it won't work thru the 3G network.
Apple says that it will work.

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my log-in to work again?

After updating to mavericks I have to constantly enter my apple ID for mail, iBooks, iTunes and many other applications that used to be part of my keychain. How can I get my apple ID log-in to work again?

Several times I've re-entered my passwords under Preferences/Internet Accounts/iCloud and it won't save since I've installed Mavericks. Also, the iCloud icon in the left column in Preferences/Internet Accounts/iCloud is greyed out but allows me to click on it to set-up. When I click on iCloud the password is filled out but the "Enable this account" check-box is not checked. I check it, and all seems correct. The icon is no longer grey, the password is correct, the "activate this account" check-box is checked. Then, when I launch mail, notes etc. I'm still prompted to re-enter my apple ID. The log-in loop continues. For years my keychain has worked perfectly. What has changed in Mavericks?

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

Management VLAN Design and Implementation

Greetings, friends. I'm having trouble getting a clear picture of how a management VLAN ought to look. I just installed a Catalyst 6509-E as my core switch, and as soon as they arrive I'm going to be replacing all of our other (HP) switches with Catalyst 3560X switches. I understand the reasoning behind segregating traffic, not using VLAN1, etc., but I've never actually implemented a management VLAN--I've always just accessed the switches via the IPs assigned to them where all the client traffic flows (not VLAN1, by the way).
Is "management VLAN" simply what we as humans call a VLAN we dedicate to management activities, or is there something official in these switches to designate a "management VLAN?"
Is it best practice to include SNMP, netflow, syslog, and NTP as "management" traffic?
There's a lot of documentation talking -about- management and management VLANs, but unless I'm blind or not looking hard enough I can't seem to find any implementation whitepapers or best practices whitepapers that demonstrate setting one up on a campus LAN. Are you able to point me in the right direction to find such documentation? Is it perhaps buried in a manual somewhere that isn't explicitly labeled "Management VLAN Design and Implementation" or somesuch?
What is the best practice for accessing the management VLAN? Inter-VLAN routing + ACLs? Multi-homed PCs or servers? Additional PCs to be used as access stations?
Thank you for your wisdom, experience, and advice!
Kevin

1. Yes, you may want to keep this traffic separate of the other traffic limiting device management access to just this vlan, as this prevents eavesdropping.
2. Indeed all other housekeeping goes via this VLAN altough you could limit it to the interactive or session traffic.
3. On a campus you could think of one big VLAN spanning the campus, one a multi-site environment or where you use L3 to go to you datacenters you probably need multiple management lan's. I've seen implementations where the management traffic was kept separate and even didn't use the routing protocol in use. The whole management lan was statically routed and would work even if OSPF or BGP was down.
4. I feel a situation where the people providing support are connected on the lan giving access to the devices is probably best. A dual homed pc is a good solution I think, other customer feel the management lan should be treated as a DMZ accessible via a firewall, but the hardcore customer insist on a second pc connected to the management lan.
Points to consider are as always,
Find the single point of failure. Any device, L2 L3 firewall that could cut off management from accessing a part of the network.
Find the right balance between security, costs, easy of access for the business your in.
Cheers,
Michel

Question on figure 3-4 of SNASw Design and Implementation guide

Hello,
on figure 3-4 on page 3-7 of the SNASw Design and Implementation guide there is an example code of SNASw port and links for Upstream Hosts.
There is one port statement and two link statements, one for each host.
However, assume I have one host with two OSA interfaces, can I use the same coding (two links, one for each OSA), as a redundancy mechanism of the OSAs? How can I choose the primary link?
Or if I do this configuration I will achieve also load-balancing? (both links active)
Regards, Apostolos.

HPR is built on top of APPN with respect to path determination. In APPN the session path is determined by the Topology and Routing Services (TRS) component in the Network Node serving the device originating the session. TRS calculates this path by looking at the characteristics associated with each possible Transmission Group (TG a.k.a. link) that can be used for the session. In the case you are talking about where you have parallel TGs (two or more links) between two nodes, and unless you do some customizing of the TG profiles, they will have equal weight (desireability). This means that over time (and with enough sessions) you would see the load balanced over the two links. If you customize the TG profile (on snaswitch you use the tgp keyword), you can achieve the result of all sessions on a primary link and no sessions on a backup link until the primary link fails. - Ray

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

I have a rather old iMac 20" (mid 2007) and I want to upgrade the Hard drive. How do I change it? How do I transfer all my applications? May I just copy the old hd into the new one? Thanks.

There are many online tutorials on how to change out the HD on a mid 2007 iMac. One of the originals is from 2007 and is Upgrade your iMac 20" or iMac 24" aluminum (mid 2007) to 1TB Hard Drive and 4 GB RAM - DIY Guide. As far as migrating your system Apple helps out with that in Setup Assistant which automatically starts when you turn on a new Mac for the first time. After you have installed the new HD you will have to format the new HD to Mac OS Extended (Journaled) and then you will have to install OS X. The first time you turn it on Setup Assistant will start. Follow the directions and you will be fine. In order to restore your information you will need to backup what is on the current internal HD first. I'd recommend using Time Machine (Assuming you are using Leopard or later) AND also creating a bootable clone using either SuperDuper or Carbon Copy Cloner.
Please complete your profile so at the very least we know what version of OS X your machine has installed.

How to design and use tabstrip in webdynpro

hi,
i trying to design tabstrip in webdynpro(SE80), i dont know how to design and use it. if u have screenshot or any other document give me. its pretty useful for my requirment. guide me

Hi Saravanan,
In your view, you have to add the UI element TabStrip. You will have an empty tab strip then. Right click on the tab strip, and add a 'Tab'. Continue in this manner to add as many tabs as you want. Each tab will have a header, specify the tab title in that.
Now go to each tab, right click and insert element. You could insert any element like a table, Input fields etc. Event handling has to be done separately for these elements. At the tabstrip level, you need to handle only the onTabSelect event. This is the event triggered when you change tab selection in the tabstirp. In the properties of the tab strip, there will be a field selectedTab. Specify the ID of the tab which you want as selected. This will be your initial selection.
You can also enable and disable tabs, say grey out tabs that have no data etc. All this can be done by context attribute binding.
You can also refer to the view by name TABSTRIP in the component WDR_TEST_EVENTS.
Regards,
Uday

How to design and develop Cost center with SAP BPC 5.1 ?

Hi all,
Can any one tell me how to design and develop cost center planning (what are the steps to follow) using SAP BPC 5.1?
Thanks,
Sandy

Hi Sandeep,
1:We need to look at whether cost center planning is tied to a profit center level and/or to a company code level
2:We could have dimensions like Account(which in this case would reflect cost element),category,entity,time with additional dimension s like profit center(cost centers can have a direct mapping to profit center,usage of properties would help in here),WBS ,projects,investment position id's etc.
3:We could look at different applications like HR(pay roll related expenses),admin,capex(to bring in depreciation values) etc to bring in data to pull in data to different cost centers either directly or via script logic(usage of destination_app)
4:For those values not tied up to profit centers ,we would look at allocating/distributing the expenses to different cost elements
5:We need to decide whether we do the planning on a monthly/periodic vs yearly level where in we would look at actual values and incrementing at a certain % to fill in as the base for our planning(using category=actual/plan plus timeperiods).We could look at Top down vs botton up approach as well to segregate the planned costs
6:Consideration should be made at security level to identify/restrict different users who needs to access specific cost centers
Yes,this is just a small jist of structure,there are 100's of other considerations which would come into picture from a business requirement level.
regards
shyam

I tried to install up date 3.6.13 and received error message that I didn't have the right permissions on this mac book , but I am the administrator on my Mac Book Air? Any ideas how to resolve this?

I tried to install up date 3.6.13 and received error message that I didn't have the system permissions required to install it. I am the administrator on my Mac Book Air? Any ideas how to resolve this?

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

CIC filter design and implementation

I need a CIC (cascaded integrator-comb) filter - see here
How can I design and implement it in CVI?
Thanks
Vix
In claris non fit interpretatio
Using LV 2013 SP1 on Win 7 64bit
Using LV 8.2.1 on WinXP SP3
Using CVI 2012 SP1 on Win 7 64bit, WinXP and WinXP Embedded
Using CVI 6.0 on Win2k, WinXP and WinXP Embedded

Hi,
Although there is a specific toolkit named Digital Filter Design Toolkit in LabVIEW, there isn't a specific toolkit for CVI.
You can see these document for more info:
http://www.ni.com/white-paper/52336/en/
http://www.ni.com/white-paper/14784/en/
http://www.ni.com/white-paper/2859/en/
http://zone.ni.com/reference/en-XX/help/371988F-01/lvdfdtconcepts/cic_filters/

My ipod nano was synced by itunes and removed all of my music and game files. I am in the process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

My ipod nano was synced by itunes and removed all of my music and game files, and replaced my music with my kids music that they have put into the current itunes library. My music is nowhere to be found on my computer, so now I am in the long, forever process of adding my music back one cd at a time, but there is no history of tetris that I paid for from the itunes store. How can I get this game back for my ipod?

Contact iTunes support and explain your situation to them. They may let you redownload it at no cost.
http://www.apple.com/support/itunes/contact.html
If they don't, I'm afraid you'll have to purchase it again. Sorry.
B-rock

Trying to clean up my iMac. Noticed that while in finder, I click on Applications and in the list I see another folder called applications that is a duplicator of the original folder. Is this truly a copy that can be deleted?

Trying to clean up my iMac. Noticed that while in finder, I click on Applications and in the list I see another folder called applications that is a duplicator of the original folder. Is this truly a copy that can be deleted?

DO NOT remove either folder. DO NOT mess with any OS X system files either. If you have dupliocates check your files in iPhoto, iTunes and your iMovies libraries. Also check your data files, under ALL circumstances stay away from any OS X systems files or you will probably bork your Mac to the point it will not run.

How to design and implement an application that reads a string from the ...

Similar Messages

Maybe you are looking for