How to Design network

Hello,
We have 2 2921 routers, 2 ASA 5510 & 3 ISP lines, 2 routers in HSRP mode below that 2 firewalls in active-passive mode & three ISP links going to terminate in on router. Now the problem is here for VPN tunnels, we have VPN tunnels on firewall & after putting 2 routers in network we are able to design how to configure P-2-P VPN tunnels.
Please find the attached diagram for more details.

Well this is depends on the security policy you have
However the option you mention is one possible best practice solution where you place the web server in the DMZ and the DB server in the internal network and only permit the required ports for server to server from DMZ to the DB server
Another option you create two DMZs zones one for the web less secure and another for the DB more secure and allow only the required ports between these two zones and this is more secure because in the case of one of the servers got compromised won't effect your inside network and keep it isolated
Hope this help
Sent from Cisco Technical Support iPad App

Similar Messages

How do I network my desktop printer with my other MAC laptops? I forgot how to do it in the settings

How do I network my laptops to my printer? I forget what steps to use in Settings.

You posted in the iMac (PPC) community.
You would do better by posting in the "laptop" forum of the model "laptop" that you have. Your questions has nothing to do w/iMacs (PPC).

How to configure network virtualization in SCVMM 2012 R2 with two host

hi everyone... can you teach me how i configure networking in my infrastructure..
i am getting confuse that i have 2 phisical server, i don't know to set the netwokring in scvmm. Every best practice, i found in internet is using more than 2 physical server.
i have been tried before with the networking which i want..but it failed...
any one help me please...

This whitepaper should explain the required steps to get this working.
http://gallery.technet.microsoft.com/Hybrid-Cloud-with-NVGRE-aa6e1e9a
The whitepaper will use more than two hyper-v hosts, but you'll get the picture.
You can have 1 host to run your NVGRE VMs, while the other host should be dedicated to run the virtualization gateway VMs.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

How do I network my Mac book pro with my Mac air?

Hi - new at this Mac stuff: how do I network my Mac book pro with my Mac air? I am really looking to just share my photos from one to the other.

Connect them both to the same router.
They should show up in the left column of Finder under Shared.

From a Technical Architect point of view, how to design a web application?

Hi to all,
I am writing this issue here because I this question is not related on how to program, but on how to design a web application. That is, this question is not related to how to program with the technologies in J2EE, but how to use them correctly to achieve a desired outcome.
Basically I know how to develop a simple web application. I like to use SpringFramework with AcegiSecurity and Hibernate Framework to persist my data. I usually use JBoss to deploy my web applications, however I could easily use Tomcat or Jetty (Since I am not using EJB�s).
However I have no idea on how to develop (or a better word would be �design�) a website which is divided into different modules.
Usually when you develop a website, you have certain areas that are public, and other areas that are not. For example, a company would want anyone on the Internet to download information about the products they are selling, however they would only want their employees to download certain restricted information.
Personally I try to categorise this scenario in to common words; Extranet and Intranet.
But � (and here starts the confusion in my mind) should I treat these two as two projects, or as one project? The content to be displayed on the Extranet is much different then the content to be displayed on the Intranet and definitely clients should not be allowed to the Intranet.
First approach would be to treat them as the same project. This would be perfect, since if the company (one day) decides to change the layout of the website, then the design would change for both the Intranet and the Extranet version. Also the system has a common login screen, that is I would only need to have employees to have a certain Role so that they have access to the intranet, while clients would not have a certain Role and thus they would not be allowed in. But what about performance and scalability? What if the Intranet and Extranet have to be deployed on the different Hardware!?
The second approach is to threat them as two separate projects. To keep the same layout you just copy & paste the layout from one project to another. However we would not want to have two different databases to store our users, one for the employees and the other one for the clients. Therefore we would build a CAS server for authentication purposes. Both the Intranet and the Extranet would use the same CAS server to login however they could be deployed on different hardware. However what if we want to change the design. Do we really want to have to just copy and paste elements from one project to another? We all know how these things finish! �We do not have time for that � just change the Extranet and leave the Intranet as it is!�
The third approach (and this is the one I like most) is to have a single project built into different WAR files. The common elements would be placed in all WAR files. However in development you would only need to change once and the effects would show in the different war files. The problem with this approach is that the project will be very big. Also, you will still need to define configuration files for each one of them (2 Web.config, 2 Spring-Servlet.config, 2 acegi-security.config, etc).
Basically I would like something in the middle of approach 2 and approach 3! However I can identify what this approach is. Also I can not understand if there is even a better approach then these three! I always keep in mind that there can always be more then two modules (that is not only Intranet and Extranet).
Anyways, it is already too long this post. Any comments are more then welcome and appreciated.
Thanks & Regards,
Sim085

Hi to all,
First of all thanks for the interest shown and for the replies. I do know what MVC or Multi-layered design is and I develop all my websites in that way.
Basically I have read a lot of books about Domain-Driven Design. I divide my web applications into 4 layers. The first layer is the presentation layer. Then I have the Facade layer and after that I have a Service layer (Sometimes I join these two together if the web application is small enough). Finally I have the Data Access layer where lately I use Hibernate to persist my object in the database.
I do not have problems to understand how layering a web application works and why it is required. My problem is how to design and develop web applications with different concerns that use same resources. Let me give an example:
Imagine a Supermarket. The owner of the Supermarket want to sell products from the website, however he wants to also be able to insert new products from the website itself. This means that we have two different websites that make use of the same resources.
The first website is for the Supermarket clients. The clients can create an account. Then they can view products and order them. From the above description we can see that in our domain model we will have definitely an object Account and an object Product (I am not mentioning all of them). In the Data Access layer we will have repository objects that will be used to persist the Account and Products.
The second website is for the Supermarket employees. The employees still need to have an account. Also there is still a product object. This means that Account and Product objects are common to the two websites.
Also important to mention is the style (CSS). The Supermarket owner would like to have the same style for both websites.
Now I would not like to just copy & paste the objects and elements that are common to both websites into the two different projects since this would mean that I have to always repeat the changes I make in one website, inside the other one.
Having a single WAR file with both websites is not an option either because I would not like to have to deploy both websites on the same server because of performance and scalability issues.
Basically so far I have tought of putting the common elements in a Jar File which would be found on the two different servers. However I am not sure if this is the best approach.
As you can see my problem is not about layering. I know what layering is and agree with both of you on its importance.
My question is: What is the best approach to have the same resources available for different websites? This includes Class Files, CSS Files, JavaScript Files, etc.
Thanks & Regards,
Sim085

How to show network status in top toolbar?

how to show network status in top toolbar? Network preferences is there, but network status has disappeared on last reset of Airport Express, but may not be connected. Thanks in advance for practical help

Interestingly, in my experience, using the method described above of unchecking the "Show Connected Servers" box in the Finder Preferences makes no difference in what I can put in the sidebar. I was able to move a sub-folder of a shared disk to the Favorites section of the Finder Sidebar, but nothing else. (i.e. I could not add the shard disk itself to the sidebar – either to the devices, favorites, or any other section, and I could only add a subfolder of the shared disk to the favorites section – not to the devices section or any other section). This was the same whether I had "Show Connected Servers" checked or not.
I'm running OS X Mavericks, and the setup I have is with a previous generation Time Capsule (i.e. the short, square kind that you could buy before the most recent taller variety came out last year), with a LaCie 3 TB USB 3.0 external drive plugged into the USB port of the Time Capsule. I'm then accessing this network drive over WiFi. The differences in what I'm seeing may be due to some change they made in the way Mavericks handles these setups.
I could also just be misunderstanding what you're saying, but I thought I'd add this in case anyone else gets similar results so that they'd know they're not alone. Let me know if I'm missing something here.

How to design this report ?

Hi experts,
How to design the customer total outstanding report as on a particular date ?
We also want Debit amount and Credit amount in the query output..
Regards,
Nishuv V.

HI,
if u want the current date u go for the customer exit (that means daily)if he wants aparticular date then u go for the user entry variable in 0calday,in variable screen he sould mention the date for that date only the out standing report will come .0calday and customer u keep in rows and those debit and credit u keep in the columns.
if daily as on date they want outstanding u go for the customer exit just u create the variable on 0calday with customer exit if variable name is 'zcedate' go to the tcode CMOD and write the below mention code.
when 'zcedate'.
clear l_s_range.
l_s_range-sign = 'i'.
l_s_range-opt = 'eq'.
l_s_range-low = sy-datum.
append l_s_range to e_t_range.
Thanks for giving this opportunity.
Thanks & Regards
k.sathish

How to design the report?

Hi,
how to change the filling data in report by vertical way?
for eg: i am creating a group (group by userId) and displaying user name and access rights info;
User Name   Access Rights
TestUser      Adminuser
TempUser    NotanAdminuser
but i want in this format
UserName        TestUser   TempUser
AccessRights Adminuser NotAnAdminuser
how to design the report?

i haven't tried using cross tab.
but my requirement is like...
Modified User Name ........ TestUser     Thendral    till 'n' number of users
Total NO of Patients..........10                    5
          Heart Failure...........5                      1
          Surgical..................1                      2
          Pneumonia             3                      1
          Chest Pain             1                       1
        till 15 rows
How to achieve this using crosstab?

How to design a 3D database in SDO

Hi,
I need to design a 3D database in Oracle9i SDO. As we know, this SDO support the 2D GIS seamlessly. How to design a 3D database in Oracle9i SDO,
Could any person have some experiences. Thanks!
Best regards!

Hello All!
Due to my diplom thesys I have to create a real 3D (not 2 1/2D) database in Oracle. You seem to have a little experience in this subject and I hope you can tell me whether my plan is possible or not...
The data I'd like to store in the database is/are BRep, means a 3D-Objekt composed of many coplanar 2D-planes. I think storing the data won't be the problem because I can store the vertices of the 2d-polygons with x,y,z values. The queries will be the main problem. I have to query all types of intersection, neighborhood and some distance between the objects.
I know, SDO_RELATE is the only filter which supports three dimensions, but there's something I don't understand:In the spatial user's guide it says:
"the SDO_RELATE operator, can be used to determine with certainty if objects interact spatially".
WHAT does this mean in case of 3D? True if the two objects intersect, false if not?
Hongwei: How is your project doing? maybe we can exchange some experience...
Many Questions, hoping for some help...;-)
regards from germany,
Markus Reuter

How to design HTML Table in ADF

I am new to ADF Tech,
I would like to know, how to design the HTML Table Rows and Columns in ADF
Ex:
<TABLE width="100%" border="1">
<TR>
     <TD>GUID</TD>
     <TD>123</TD>
     <TD>Name</TD>
     <TD>Mark Antony</TD>
     <TD>Version</TD>
     <TD>1.0</TD>
</TR>
<TR>
<TD>Created</TD>
     <TD>Oracle</TD>
     <TD>Modified</TD>
     <TD>Oracle User</TD>
     <TD>Placements</TD>
     <TD>20</TD>
</TR>
</TABLE>
Thanks in Advance

Balaji,
With JSF in general (and ADF Faces too), you should not think in terms of HTML output, but in terms of JSF components. ADF has an af:table component that renders things in rows-and-columns, but emits HTML that is much more complex than just a simple HTML table.
John

How to design templates with Microsoft Excel

Hi
When creating a new template in EBS, we have "Microsoft Excel" as one of the the template types (just like RTF). How to design the template if Excel is selected as the template type. I uploaded a blank EXCEL file and the concurrent program errors out with "Excel Processing" exception.

hi,
r u uploading the blank excel..r the excel u got from the Analyzer for Excel from the BIpublisher.
One small clarification on my previous post..like the .xdo not the excel name.Inside the excel it is the sheet name.
If u uploading the excel that u got from the Analyzer for excel means it should work.
Plz select the template type as Excel after uploading the template.
Its working for me.
This link will be helpful for u
http://blogs.oracle.com/xmlpublisher/2007/05/16/
Edited by: Ananth.v on Mar 4, 2010 3:07 PM

How to design a particular screen?

Hi All,
In my apllication i am working on oracle forms using manually. I would to design a
particular page with the following attributes as shown below?
How to design sunch kind of pages.
Column names
Expir
Reocrd Year Mnt Ct Mnt Year Fuel Fuel code Mine type Reported fips source name
Type
{select list} {Text item} {text Item} {Select list} {Text Box} {Text box} {Text box} {select list} {select list} {text item} {select item} {text item}
till Mine type i do not have any scrolling type, But from reported onwards a scroll should apper so that i can scroll to right and seen what are the attributes
still exists.
Since this is a form, how can we maintain or develop the screen.
Hope u have understood my problem.
Or can anybody give let me know how to display or attache my screen shot, so that u may clear idea on this.
Thanks,
Anoo..
Edited by: Anoo on Mar 2, 2010 4:38 AM

Hi Ben,
How do we use tabular form can u let me know the procedure to design it? bec i have not aware of that.
-Anoo..
Edited by: Anoo on Mar 2, 2010 4:41 AM

How to design EDW for source systems from different Time-Zones

How to design EDW for source systems from different Time-Zones?
Suppose IT landscape has a global BW in New York, and source systems in americas, europe and asia, then how the time-zones effect on time related things like delta selections on date or timestamp etc.

As you said BW is global in NY, your source system must be global too. People from various locations can connect to same source system and thus timestamps for delta is always maintained as 1 single time. We have same scenario in our project. Our R/3 system is used by users in US and Europe. So we run deltas twice in day to make sure we got deltas from both locations.
If scenarios was such that all locations connect to separate R/3 system, then obviously you have multiple queues. That is unique delta queue for each source system so deltas will be pulled as per data in respective queues.
Abhijit

How to design the URL?

How to design the URL?i know that the Google will take down the good URL.such as the staticize URL Google will like more..

A site's URL structure should be as simple as possible. Consider organizing your content so that URLs are constructed logically and in a manner that is most intelligible to humans (when possible, readable words rather than long ID numbers). For example, if you're searching for information about aviation, a URL like http://en.wikipedia.org/wiki/Aviation will help you decide whether to click that link. A URL like http://www.example.com/index.php?id_sezione=360&sid=3a5ebc944f41daa6f849f730f1, is much less appealing to users.
Consider using punctuation in your URLs. The URL http://www.example.com/green-dress.html is much more useful to us than http://www.example.com/greendress.html. Google recommends that you use hyphens (-) instead of underscores (_) in your URLs.
Overly complex URLs, especially those containing multiple parameters, can cause a problems for crawlers by creating unnecessarily high numbers of URLs that point to identical or similar content on your site. As a result, Googlebot may consume much more bandwidth than necessary, or may be unable to completely index all the content on your site.

How to design muti-display in query? thanks

Hi, Experts
I want to know how to design query like that(By product):
CHAR:product
KF:P/O,Ship.Total Sales,inventory
                             Week1 Week2
Product A P/O               70     60
Product A Ship              60     75
Product A Total Sales       80     70
Product A Total Inventory   170   175
                              Week1 Week2
Product B P/O               60     50
Product B Ship              50     65
Product B Total Sales       80     70
Product B Total Inventory   170   175
Thanks,

Thanks Rad,
I want to get the report like this:
Product A P/O 70 60
Product A Ship 60 75
Product A Total Sales 80 70
Product A Total Inventory 170 175
Product B P/O 60 50
Product B Ship 50 65
Product B Total Sales 80 70
Product B Total Inventory 170 175
Product C P/O 60 50
Product C Ship 50 65
Product C Total Sales 80 70
Product c Total Inventory 170 175
Base on same infoprivoder,same 'product' char and KF.

How to Design network

Similar Messages

Maybe you are looking for