How to detect camera & microphone change

If a user right clicks on the flash player and selects settings and then selects a differet camera and/or microphone, how do I detect that this change has occured so that I can call getCamera and/or getMicrophone to get a reference to the new camera and/or microphone?

I see that this issue has been logged as a bug/feature request at https://bugs.adobe.com/jira/browse/FP-41
Please let me know if anybody has any recomendation other than what has already been suggested.

Similar Messages

How to Save Camera Raw Changes?

Hi all,
First time poster here so please forgive my likely ignorance of Bridge's brilliant features. I have just started to use Bridge as my primary tool in my post-processing workflow. As I started going through a job I completed recently I started to open some under-exposed JPG in Camera Raw (I find it faster to adjust basic things like exposure than Photoshop). Anyway, once I had made my desired changes I then clicked Done which returned me to Bridge and the thumbnail showed the changes I had just made.
My problem is this. Owing to the fact that Bridge does not contain a Histogram I am using another piece of software to quickly view the histogram. Anyway after making a few changes without switching programs I then switched back to discover that the half a dozen or so Camera Raw adjustments were not visible in the alternative program, owing to the use of sidecar xmp files to store the Camera Raw mods.
So my question is this. Say I have 10 images that have all had modifications made to them in Camera Raw (but I haven't opened the image and saved it), how can I bulk export those changes to new JPG images without having to go into each image one by one? It's gotta be there somewhere, I just can't find it.
Can anyone help, please?
Cheers
Josh

the .xmp files are only generated if the file you are working on doesn't support metadata but JPG files support it so the information is written inside them. If you want to "flatten" the file so that the pixel information gets changed then you will have to resave the files which isn't something that you should do very often with JPG files (preferably only once).
To mass save files you can either select them and go to Tools->Photoshop->Image Processor (but this will launch Photoshop) or open them up in Camera Raw, select all of them in the film strip and select Save Images

How to detect internal microphone hardware is dead?

My internal microphone is not working. but when i inserted the headset, headset microphone is ok. How to confirmed that internal microphone(hardware) is dead?

My HP pavilion. Model number: 14-b133TX

How to detect Summer Time change (GMT or GMT+1)

Hi all,
My problem is that I retrieve from xml a timestamp. It indicates the London local hour.
I do format the Calendar constructed object with SimpleDateFormat, but I have to append "GMT" or "GMT+1" (BST) to the output String.
How do I detect when the time is BST (British Summer Time) and when Greenwich Mean Time?
Thanks for your help.
Best regards,
Antonio

Hello Jarrod
Thank you for your help, I looked the previous threads and download .NET Framework 2.0. Finally I am able to get it work.
Amit

How to detect and capture most number of cameras by JMF?

i make a program that detect camera and display video captured from it using JMF
but the problem is that some camera s cant be detected
what do u think where is the problem ?
and what about jmf detection ? is it efficient with all camers or even most types ?
thanks in advance

i changed my code to detect all what i know of video formats
but still cant detect some cameras (webcams)
is JMF the reason ? or still my code need some additions
really need ur opinions
and this is my code
boolean fetchDeviceFormats(){
Vector deviceList = CaptureDeviceManager.getDeviceList(new VideoFormat(null));
          CaptureDeviceInfo CapDevice = null;
          Format CapFormat = null;
          String type = "N/A";
          CaptureDeviceInfo deviceInfo=null;
boolean VideoFormatMatch=false;
          for(int i=0;i<deviceList.size();i++){
               // search for video device
               deviceInfo = (CaptureDeviceInfo)deviceList.elementAt(i);
               if(deviceInfo.getName().indexOf("vfw:")<0)continue;
               Format deviceFormat[] = deviceInfo.getFormats();
               for (int f=0;f<deviceFormat.length;f++){
                    if(deviceFormat[f] instanceof RGBFormat)type="RGB";
                    if(deviceFormat[f] instanceof YUVFormat)type="YUV";
                    if(deviceFormat[f] instanceof JPEGFormat)type="JPG";
                    Dimension size = ((VideoFormat)deviceFormat[f]).getSize();
                    camImgSize.addElement(type+" "+ size.width+"x" +size.height);
                    CapDevice = deviceInfo;
                    camCapDevice.addElement(CapDevice);
                    System.out.println("Video device = " + deviceInfo.getName());
                    CapFormat = (VideoFormat)deviceFormat[f];
                    camCapFormat.addElement(CapFormat);
                    System.out.println("Video format = " + deviceFormat[f].toString());
                    VideoFormatMatch=true;     // at least one
          if(VideoFormatMatch==false){
               if(deviceInfo!=null)System.out.println(deviceInfo);
               System.out.println("Video Format not found");
               return false;
          return true;
thanks in advance

How can I selectively preview changes in Camera Raw CC

When working in the Basic Panel in ACR, I would like to selectively review changes of only one slider at a time. For instance, I have have adjusted exposure and now have also adjusted blacks, how can I preview the change in Blacks while the adjusted Exposure is still in effect? If I toggle the Preview button on and off, I see all the changes cumulatively. I have tried using the command key, shift, key and option key however, that doesn't seem to work.
Thanks.

Sorry, there is another way, which I'd forgotten about, because I almost never use it.
Say you make these edits, and only these edits: Exposure -1.0 stop, Contrast +20 and Shadows +100, in that order (the values don't matter, they're just random examples).
Now, to cycle back through the edits in reverse order to that which you made them, use Ctrl + Alt/Option + Z.
Pressing once gets you back to the image as edited only by Exp and Contrast. Twice gets to Exp only.
Three times eliminates Exp and you're back to where you first opened the image in ACR.
To re-instate the edits in the original order, press Ctrl + Shift + Z.
But this procedure can get messy and confusing in 3 circumstances that I can think of, just off the top of my head.
First, if you move a slider whilst experimenting with your edits (say, for example, Clarity +20) but then reset it to zero because it does not work as expected.
Now, when you cycle backwards or forward, your abandoned Clarity edit will be shown.
Secondly, if you make more than 3 edits, it can become difficult to remember in what order you initially made them and you can get lost when cycling back and forth.
Thirdly, if you have made any presets and these are applied automatically when first opening the image in ACR, the cycling can once again become more difficult to keep track of.
Whilst the use of Snapshots in the manner I first suggested is more cumbersome, it guarantees that you can keep track of your edits and compare their before and after effect.
Message was edited by: Andrew_Hart

How to detect modifications in an ABAP Object?

Hi all,
I was wondering if there's a simple way of detecting modifications in an ABAP Object.
Imagine an ABAP entity object which holds several attributes and you need to know if this object has been modified. Instead of having to check attribute by attribute to compare it's previous value with the new one I came with the idea of calculating a HASH code for the object before the execution of the application which can change the object attributes and comparing it with the HASH calculated for the same object after the execution.
That way, checking only two hashes simplifies a lot the code. So.... is there any way of calculating a HASH for any object instance? if not... any other approach?
Thanks in advance.

Sorry Hüseyin Dereli, but I'm not talking about source version control, but how to detect attribute modifications of an ABAP Object Instance.
for example, suppose you have a program which reads data from DataBase and stores temporally that data into an ABAP Object like this:
ABAP Object AAAA{
   private attr1
   private attr2
and passes this ABAP Object into a screen for user interaction, or even a FunctionModule or Method or anything else...
data: myObject type ref to AAAA.
myObject-attr1 = 1
myObject-attr2 = 2.
CallFunction AnyFunction Changing data = myObject
After the execution of AnyFunction I would like to know if myObject has been changed but I'm trying not to check attribute by attribute because if myObject has a lot of attributes (not in this example but in the real source code)
It would be great if we could do something like this:
data: myObject type ref to AAAA,
          oldHash type hash,
           newHash type hash.
myObject-attr1 = 1
myObject-attr2 = 2.
oldHash = myObject->get_hash()
CallFunction AnyFunction Changing data = myObject
newHash = myObject->get_hash()
if oldHash NE newHash.
* MyObject has been modified
endif.

I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it. How can I stop or change this?

I have verified my new email address as my Apple ID but my IOS devices keep asking me to sign in to my previous email/Apple ID but have no access to it. How can I stop or change this?

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. When you do this you may find that the password for your old ID isn't accepted. If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to detect control-mouseclick event

I'm trying to make the Z-scale max property of an Intensity graph more flexible to modify from the front panel. In the attached VI, I use an increment/decrement control and just detect a value change event (ignoring the value of the control). This works fine, although it is a bit of a kludge.
I'd like to make it more functional though. My main question is the following: How can I detect a "control-mouseclick" event? I plan to use this event to change the Intensity Graph max by a factor rather than by an additive value.
A second small question: On the numeric control, is there a way I can get rid of the displayed number whitespace and leave only the increment/decrement buttons?
Thanks,
Allan
Solved!
Go to Solution.
Attachments:
intensity graph scale.vi ‏16 KB
intensity graph control.jpg ‏21 KB

tbob,
Thanks. Your suggesetion solves my original problem, but it creates another. With the platmods "ctrl" boolean hooked to a case statement, I can choose between those "ctrl click" and "regular click" cases. However, with the "mouse down" event, I can't tell if the increment or decrement button was pressed.
I guess one solution is to replace a single inc/dec control with two booleans controls (increase and decrease) and to have two separate events . Problem with that is that I'm really piling up event cases, because I'll need several copies of this type of control on my front panel.
Can you suggest any way to have both inc/dec button and ctrl-mouse functionality? Maybe there is a way to combine the "value change" and "mouse down" events?
Allan

How can I check and change the size of photo or doc in iPhone or any other app

How can I check and change the size of photo or doc in iPhone or any other app

You would need software form a third party to have this option. The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option. You have to purchase it, but it will give you more advanced options than the software that came with the printer.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How to set CAM Mode background wallpaper

Hi forum users,
Where can i download or find the "xv" application ?
Thanks.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.
Anthony Worrall wrote:
In chapter 10 "Control Access Mode" of the "Sun Ray Server Software 3.1
Administrator's Guide for the Solaris Operating System"
http://docs.sun.com/source/819-2384/cam.html
To Change the Backdrop
1. Run xv (version 3.10 or later) on any desired image.
2. Save the file as "XPM". Rename the file from <>.xpm to <>.pm.
3. Edit the file /opt/SUNWut/kiosk/prototypes/dtsession/Dtwm and change
the two backdrop lines to the full pathname of the <>.pm file.
You can also place the <>.pm file in /usr/dt/share/backdrops and then
refer to it by <> in the Dtwm file.
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Mohamed Ali Bin
Abdullah
Sent: 16 August 2006 13:14
To: [email protected]
Subject: [SunRay-Users] How to set CAM Mode background wallpaper
Importance: High
Dear SunRay Fourm Users,
I need help regarding Sun Ray CAM mode background wallpaper settings.
My objective is that, non-card users( DTUs ) will start the Controlled
Access Mode. In CAM mode i don't want any application to be launch. I
want CAM mode background shows only my wallpaper( jpg format ). Users
with card can access the system( dtlogin ). I have set those policy in
SunRay Web Administration Console and restart the services.
My question is, how can i set or configure the CAM mode background to
show my wallpaper( jpg fornat ) ?
These are my setup environment information:
- Sun E220( Sparc )
- Installed Solaris 10 06/06 OS.
- Installed latest Solaris 10 recommended patches
- SunRay Server Software 3.1
- Installed patch 120879-04
- 2x SunRay 1
- 2x SunRay 150
- 2x SunRay 170
I would be thankful if anyone can offer me help and guidance.
Please let me know if you need any more information.
# Yours Sincerely,
# Mohamed Ali Bin Abdullah.

Hi forum users,
Where can i download or find the "xv" application ?blastwave.org has it for example

How to detect is flash player is idle

How to detect whether flash player is playing any animation
like moving an object or it is static like an image for .swf file.
I want to know the duration of the .swf file played.

is is as2, yes I have to detect animation duration achieved
via action script, for example there is only one frame in the .swf
in that frame there is movieclip it will change its _x positon
using scripting upto 500 pixel and come back to 0 position it may
loop for 3 times or 4 times and stops. I want to detect duration of
the movie clip played till it stops. I have only .swf file no
fla.

Imovie HD don't detect camera

iMovie HD 6 does not detect camera and it does not capture
what I can do?
Sorry my misspelling, and thank youu!!

Please sit down, it's bad news!
If this is the one:
http://www.trustedreviews.com/camcorders/review/2007/09/15/Sony-HDR-SR8E-Camcord er/p1
then you will never get it to work with iMovie 5 or 6.
Connectivity options are comprehensive, too, including HDMI and component for attaching to HDTVs, plus A/V with composite and S-Video plus RCA audio for regular TVs. All of these are output only, however, so you won't be able to dub analogue sources to AVCHD. The HDMI connection is also a proprietary small socket, and no adapter is supplied.
It uses AVCHD's MPEG-4 H.264 AVC compression. Only iMovie 7 (Part of iLife 8) can accept that format, and do so via USB. But that format is not really intended for further editing.
So, either upgrade to iLife 8 or change the camera!

How indesign detects that the images have been modified

Hello,
My problem is that all my images links are seen modified (yellow triangle) while the images don't have been modified.
The modified dates are the same.
All my images are on a unix server and indesign is used on Mac.
How indesign detects that the images have been modified ?

Thank you for your answer.
When you say the time stamp you talk about the modification date in the box link info ?
Because this date is the same on the image and in indesign and when I update the image this date doesn't change.
the only informations that change when I update the links are the import date and the state (modified become ok)

Detect IP address changes when using ServerSocket

We are developing an application which has a ServerSocket, which is started in one machine. That machine is a laptop and it may change the network it is connected to. So the situation is the following:
- The laptop connects to network A and has a IP 192.168.1.1 (for example).
- The ServerSocket is started and it's bound to that IP. It is blocked waiting for new connections, with ServerSocket.accept()
- The laptop changes the network (to network B) and gets a new IP 192.168.100.2
- ServerSocket is still running (blocked in the accept() method), but it is bound to an IP address which is no longer correct.
The problem we have found is how to detect that the IP has changed so that we can "fix" the ServerSocket and bind it to the new IP address.
We have though in one solution: from time to time get the localhost IP address of the laptop and check if it's the same used in ServerSocket. If not, then close the ServerSocket and open a new one.
However, this is not a wonderful solution. Do you know if there is a best solution to solve this?
Thank you very much for help

- The ServerSocket is started and it's bound to that IP.Not unless you specifically program it that way. By default it is bound to all local addresses.
So you don't have a problem.
- ServerSocket is still running (blocked in the accept() method), but it is bound to an IP address which is no longer correct.No, see above.
The problem we have found is how to detect that the IP has changed so that we can "fix" the ServerSocket and bind it to the new IP address.Unnecessary: see above.

How to detect camera & microphone change

Similar Messages

Maybe you are looking for