Links in User Object in aspx

I have a user object that I use on my aspx page. If I use the
same style sheet on my page inside my user object the object
displays fine. But if I take the link out of the object, the page
doesn't display correctly in the design view. Even though the link
style sheet is in the page itself.
When I load the page into the browser it displays fine.
The only way to handle the problem is to put the link or
style elements in the User Object itself. But that defeats the
purpose of being able to move the object from page to page and use
the styles of each sheet.
Anyway to solve this?
Thanks,
Tom

Nevermind.
It was displaying fine but the relative address was giving it
a problem.
When I changed that it worked fine.
Tom
"tshad" <[email protected]> wrote in message
news:espsfd$irp$[email protected]..
>I have a user object that I use on my aspx page. If I use
the same style
>sheet
> on my page inside my user object the object displays
fine. But if I take
> the
> link out of the object, the page doesn't display
correctly in the design
> view.
> Even though the link style sheet is in the page itself.
>
> When I load the page into the browser it displays fine.
>
> The only way to handle the problem is to put the link or
style elements in
> the
> User Object itself. But that defeats the purpose of
being able to move
> the
> object from page to page and use the styles of each
sheet.
>
> Anyway to solve this?
>
> Thanks,
>
> Tom
>

Similar Messages

Is Active Directory's ExtensionAttributes9 a field in user object and how to retrieve it in the class type userprincipal?

Hi, I'm using VS2012.
I want to use this ExtensionAttributes9 field to store date value for each user object. I use UserPrincipal class, a collection of these objects are then bind to a gridview control. Is ExtensionAttributes9 a field in AD user object?
How can I access it and bind to the gridview?
If this field isn't available then what other field can use?
Thank you.
Thank you

UserPrincipal is basically a wrapper around DirectoryEntry:
http://msdn.microsoft.com/en-us/library/system.directoryservices.directoryentry.aspx and only provides a subset of the Active Directory, although the most common, attributes that are available for the user object. The attribute that you
seek is not one of them.
By utilizing the method that I provided you a link to, it will return the underlying DirectoryEntry that was used to build the UserPrincipal object and should allow you to access the attribute that you seek.
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link.

Custom attributes added to user objects not visible in OWA address book

Hi,
I am using Exchange 2013 and recently added a new custom attribute in the user object properties using the details template editor to be visible in the GAL The new attribute is correctly getting displayed in the GAL from outlook clients but not visible
in OWA address book. Is there a way to update the display of user objects in OWA address book to include the new custom attribute?
Thanks!

Hi Abu,
Please see following link:
Customize Details Templates
http://technet.microsoft.com/en-us/library/ms.exch.toolbox.detailstemplate(v=exchg.150).aspx
It says, Use the Details Templates Editor to customize the client-side graphical user interface (GUI) presentation of object properties that are accessed by using address lists in Microsoft Outlook.
My understanding is this setting only visible in Outlook.
Please correct me if there is any misunderstanding.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Linking two ODS objects using a multiprovider

Hello Gurus,
I need to link two ODS objects and both are having 3 common characteristics and the relationship between the two objects are one to many.
My questions would be....
1)When the relationship is one to many can I set it up in the multiprovider to sum it up and show in the report?
2)I have 5 other charaterstics that I need to report(Slice and dice) on, but these are not common ones to both ODS objects. Is it possible for the user to get the report based on these charaterstics also? Or do I need to make sure that these 5 also exist in both DOS objects?
Thank you,
DM

Hi Sh,
Thank you very much for your reply. But I have few concerns.
1)One to many relationship will not have any effect on the data linking since the multiprovider clubs the key figures on common characteristics. I tried this on the system and it worked.
2)The problem would be not having similar characteristics on both infoproviders. So if I want to report on the chars individually it will have a problem( Will come as non assigned values)
But the documentation says the multiprovider supports Homogenous and Heterogeneous cases. Please refer the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/52/1ddc37a3f57a07e10000009b38f889/frameset.htm
I am not sure what I can do now....whether to get all the characteristics in both infoproviders by enhancing the them. Or is there another way?
And lastly the scenario I am looking at is billing and cost of goods. So I might find records in cost of goods which may not have corresponding records in billing.(There can be goods in stock which need to be billed)The problem would be the way multiprovider link records(union) so it will have all the records from both sides even if they do not correspond to each other.
Let me know what you think.
Cheers,
DM

Any clues on how to create a resource object to push a user object into res

I am working on a situation where I have to push a user object via a resource object and not having assigned to the user (in other words not linked to the user).
any ideas?
My approach is some thing like this
IN the "user" object I do set all the attributes required per the resource definition
Here is the code snippet for resource object creation:
<Action name='create services resource object' process='Provision'>
<Argument name='op' value='createResourceObject'/>
<Argument name='object' value='$(user)'/>
<Argument name='objectType' value='user'/>
<Argument name='resourceId' value='UnixUIDServices'/>
</Action>

I by no means want to sound belittling... so don't take me that way..
You need to understand the basics of files, and networks. You can't check if a file exists on another machine if you don't have a network protocol to communicate with. The reason \\ works under windows is because you are using an invisible (to you) network protocol. You probably know it as windows sharing. If your file were not shared under it's own name, that method wouldn't work (I'm assuming your entire drive is shared without a password... a horrible security flaw...but one thing at a time)
You can use FTP protocol to check if a file exists. You can either send the raw text FTP commands through a socket connection in java, or you can use a freely available FTP java API to make it a bit more simple. You could also write a small java server on the other machine, and have it tell you what you need to know with a socket connection. In this way, you have created your very own network protocol.

Read group membership for a user object and populate every group with matching user from another domain

I have LON\JSmith in LON domain and DEL\JimSmith in DEL domain
I would like to extract group memberships of LON\JSmith in LON domain and append matching by email (i.e. DEL\JimSmith) user object in every group in LON domain.
for instance
LON\JSmith and DEL\JimSmith is the same person and has same email address [email protected]
LON\JSmith belongs to 3 groups - LON\localadmingroup;LON\univdesktop;LON\globalsurvey
The outcome of the script should be
LON\JSmith; DEL\JimSmith should be in 3 groups - LON\localadmingroup;LON\univdesktop;LON\globalsurvey.
How can i do it?
Navgup

Hi Navgup,
Please refer to the script below, to query users in other domain by specifying the parameter "-Server" in the cmdlet "get-aduser", and also note I haven't tested the script below:
import-module activedirectory
get-adgroupmember "group"|foreach{
$email=(get-aduser $_.samaccountname -properties *).EmailAddress#get the user email
Get-ADUser -filter {EmailAddress -eq $email} -properties * -server DomainB.company.com|select samaccountname, memberof}#filter user name and group with the email in other domain
To get users across domain, please also refer this blog:
Adding/removing members from another forest or domain to groups in Active Directory:
http://blogs.msdn.com/b/adpowershell/archive/2010/01/20/adding-removing-members-from-another-forest-or-domain-to-groups-in-active-directory.aspx?Redirected=true
I hope this helps.

Link with an object or an image?

why isn't it possible to establish a link with an object or an image?

See the topic 'How To Link An Image' in the iBA user tip 'iBA Tips and Tricks 01'.

[Exchange 2013] Cannot find Template User object error

Hello,
I've faced with really strange issue. When I try to execute cmdlet Get-Recipient for user from @hotmail.com, @outlook.com and @live.com domains I get error "Cannot find Template User", even SilentlyContinue is used.
Let me show an example. Open PowerShell and load exchange snapin:
[PS] C:/>Add-PSSnapin Microsoft.Exchange.Management.Powershell.E2010
[PS] C:/>$existingContact = Get-Recipient [email protected] -ErrorAction SilentlyContinue
Cannot find Template User object.
At line:1 char:1
+ Get-Recipient [email protected] -ErrorAction SilentlyContinue
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], ADTransientException
+ FullyQualifiedErrorId : [Server=CAS15-CA-1,RequestId=5cfa31f1-96d5-43c2-8c98-ea50d108276f,TimeStamp=10/24/2014 1
:38:08 PM] [FailureCategory=Cmdlet-ADTransientException] EC4D1948
It works well for others domains (e.g. gmail.com), besides it works well for Exchange 2010. And finally it works well in Exchange Management shell.
What does the error mean? Why Get-Recipient doesn't work only for Microsoft's domains?
Thanks in advance!

I have seen a lot of weird errors and sometimes incomplete results when manually adding the Exchange Snappin into powershell. Exchange 2010+ is setup for remote powershell, so if your on the server then use the exchange shell which will do all the remoting
for you, or you can setup the remote session your self.
http://blogs.technet.com/b/heyscriptingguy/archive/2012/01/23/learn-how-to-use-powershell-to-run-exchange-server-commands-remotely.aspx
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com

Expired AD User Object certificate

We have an expired certificate under Active Directory User Object > Certificates.
Can someone please tell me to renew or re-create this certificate?

Hi,
We cannot renew expired certificate, you can request a new certificate instead.
If you are using enterprise CA, you can refer to this article below to request a new certificate:
Request a Certificate
http://technet.microsoft.com/en-us/library/cc730689.aspx
For stand-alone CA:
How to Obtain a Certificate Using Windows Server 2003 Stand-Alone CA in Operations Manager 2007
http://technet.microsoft.com/en-us/library/bb735417.aspx
How to Obtain a Certificate Using Windows Server 2008 Stand-Alone CA
http://technet.microsoft.com/en-us/library/hh467905.aspx
Best Regards,
Amy

AD user object ntSecurityDescriptor changed

We have a single user object that was created with the same values under ntSecurityDescriptor as all other user objects in the same OU. Yesterday the user had
issues, no email, unable to access shared drives, unable to print etc. When we investigated we found over half of the settings under ntSecurityDescriptor
had been lost. There is nothing in the event logs/audit to show what, if anything, was done to his account.
I ran Get-ADUser
-Filter
-Properties ntSecurityDescriptor
|
select
-ExpandProperty
ntSecurityDescriptor
and found many inconsistencies despite user accounts being created to a standard format, apart from domain admins/IT
staff.
Is there a default set of values for ntSecurityDescriptor? If so, what is it?
Also, does anyone have any idea how a user object can suddenly lose some of these settings?

ntSecurityDescriptor == The Security Tab. This attribute holds the security defined on the object aka the ACL (Access Control List) and a set of ACEs (Access Control Entries) - Those can either be defined explicit on the object or inherited from parent objects
in the tree. Each objectClass (type) get a set of default ACEs from there schema definition - those are stored in defaultNtSecurityDescriptor.
ntSecurityDescriptor is changed when the security is changed on the object, or any other object above the particular object in the tree. Is the particular user a member of any built in group such as Domain Admins, Server Operators, Accounts Operators, Backup
Operators or Print Operators - If yes - AdminSDHolder is might what causing what you're experiencing:
http://technet.microsoft.com/sv-se/magazine/2009.09.sdadminholder(en-us).aspx
However changes to ntSecurityDescriptor / ACL would not result in the issues you describe such as the particular user who had it's ntSecurityDescriptor changed loosing access to resources.
Enfo Zipper
Christoffer Andersson – Principal Advisor
http://blogs.chrisse.se - Directory Services Blog

SQL Developer and Blocking View of Other Users' Objects

I am using SQL Developer in a classroom environment. My student users can “see” Other Users objects. They cannot modify, but none the less can see the structure and data.
I only want the users to be able to see their own objects. Is there a privilege that needs to be revoked? (In using SQL Plus command line, this was not a problem.)
Thanks.
-Karen

Karen,
From sysdba account (sys/system). Run following and verify for that particular user grant is revoked. May be exit from sql developer and log back in or refresh view.
YOu can also potenially revoke all the privs from all non admin uses i.e.r even connect/resource roles and grant them back.
revoke select any table from yourschemaname;
revoke connect from schemaname;
revoke create session from schemaname;
revoke resource from schemaname;
Then just grant privs as need basis
grant connect to schemanme;
grant resource to schemaname;
grant create session to schemaname;
..Regards
Edited by: OrionNet on Jan 23, 2009 2:01 PM

How do I get the value of a resource property stored in the user object?

I need a way to get to the myflag property on the resources in an object
I have been trying to get to it by first getting the user object...
but how can I get to the properties them self?
If the following is the user object and I need to refer to the different myflag properties in a form?
What I want to do is to make the system NOT change password on accounts where the myflag is set to true
Anyone that could point me right here?
I use the following code to get the userObj in the form...
      <Field name='userObj'>
        <Derivation>
          <invoke name='getObject'>
            <ref>:display.session</ref>
            <s>User</s>
            <ref>resourceAccounts.id</ref>
          </invoke>
        </Derivation>
        <Disable>
          <isnull>
            <ref>resourceAccounts.id</ref>
          </isnull>
        </Disable>
      </Field>And the resulting userObj looks like this

<User id='#ID#BAF7-:882E9B73531:87D587F7-:726EA99B2E0A89CD' name='43725' creator='Nnnnn' createDate='1328101309098' lastModifier='Nnnnn' lastModDate='1352128262380' lastMod='71' repoMod='1352128262383' primaryObjectClass='User' password='xxx' lastPasswordUpdate='1352128195038'>
<Services>
    <ObjectRef type='Resource' id='#ID#DC98A0E2B99AE627:1A6684F:10F96310B9F:-7FE1' name='Xolid'/>
</Services>
<PasswordExpiration>2012-11-04T15:09:55.038Z</PasswordExpiration>
<ResourceInfoList>
    <ResourceInfo accountId='cn=S43725,ou=Xolid Users,ou=User Accounts,dc=adxx,dc=xxx,dc=net' accountGUID='<GUID=3c020b6e1c253d45808fc47889201c4a>' tempId='dc98a0e2b99ae627:-3984a159:139b34ea14f:-4c10' created='true' lastPasswordUpdate='1352128262115'>
      <ObjectRef type='Resource' id='#ID#DC98A0E2B99AE627:1A6684F:10F96310B9F:-7FE1' name='Xolid'/>
      <ResourcePropertyValues>
        <Map>
          <MapEntry key='myflag' value='false'/>
        </Map>
      </ResourcePropertyValues>
    </ResourceInfo>
    <ResourceInfo accountId='cn=S43725A,ou=Administrative Users,ou=User Accounts,dc=adxx,dc=xxx,dc=net' accountGUID='<GUID=fc4ca613bf40b644948cf216e1ec50bd>' tempId='dc98a0e2b99ae627:-4ce08fd6:13a5c68dd38:4fc4' created='true' lastPasswordUpdate='1352128262285'>
      <ObjectRef type='Resource' id='#ID#DC98A0E2B99AE627:1A6684F:10F96310B9F:-7FE1' name='Xolid'/>
      <ResourcePropertyValues>
        <Map>
          <MapEntry key='myflag' value='true'/>
        </Map>
      </ResourcePropertyValues>
    </ResourceInfo>
</ResourceInfoList>
<Attribute name='closest_manager' type='string' value='77774'/>
<Attribute name='firstname' type='string' value='Test'/>
<Attribute name='fullname' type='string' value='Testersson, Test'/>
<Attribute name='xr_attr_flag' type='string' value='N -------- MA20120201 MB20120201 MC20120201 MD20120201 ME20120201 MF20120201 MG20120201 MH20120201 MI20120201 MJ20120201 MK20120201'/>
<Attribute name='xr_date_flag' type='string' value='N 20120914 MS20120201 MT20120914'/>
<Attribute name='lastname' type='string' value='Testersson'/>
<Attribute name='local_id' type='string' value='S43725'/>
<Attribute name='position_end_date' type='string' value='2012-08-10 01:08:18.0'/>
<AdminRoles>
    <ObjectRef type='AdminRole' id='#ID#DC98A0E2B99AE627:1A6684F:10F96310B9F:-7FF7' name='XXX - Manager'/>
</AdminRoles>
<MemberObjectGroups>
    <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
    <Property name='AD_HomeDir_Xolid_S43725' value='\\XXX5014A\UserFolders$\S43725'/>
    <Property name='AD_ProfileDir_Xolid_S43725' value='\\XXX5014A\UserProfiles$\S43725'/>
    <Property name='idm_lastLoginLocale' value='sv'/>
    <Property name='myflag' value='false'/>
</Properties>
</User>

Thanks Praveen.
I was missing the default namespace of "http://sapportals.com/xmlns/cm" - I thought I could just pass an empty string for the namespace, but it looks like I must always specifiy, even if it is default.
Tom

Linking a User Defined Field in Items table

How to Link a User Defined Field in 'Item Master Data' table, to my own User Defined Table?
Example:
In Item Master Data table, I want to add 3 User Defined Fields, for e.g, Country, State and Region.
When the value of Country combo is changed, values loaded in State and Region combos should change automatically.
I'm storing the relationship between Country,State and Region in my own user defined table. I want to load the comboboxes with a query from that table.
Or, if there's no solution to the above problem:
when the Item Master data table is opened, can we launch our own form?
Is there a way to specify that?
Please reply me back.. I'm a beginner learning SAP.
With Thanks in advance,
Geetha
Key: Loading a user defined field through Query defined by us.

Geetha,
You should search this forum on user defined fields as you will find many posts that may assist you with your question.
HTH,
Eddy

Request: compare and propagate user objects

After making changes to table definitions, views, program units, and so on, it may be useful to propagate these changes to another database user. This maybe another development environment, or a testing environment in same or another database. Like "Compare user objects" option in PLSQL/Developer.
/* BEGIN: cut and paste from PLSQL Developer Help */
Compare User Objects
After making changes to table definitions, views, program units, and so on, it may be useful to propagate these changes to another database user. This maybe another development environment, or a testing environment. To compare the objects of your development user with another user, you can use the Compare User Objects function in the Tools menu. This will bring up the following dialog:
On the Selection tab page you can select the objects you wish to compare. After making this selection, you can press the Target Session button, to select the user and database that you want to compare. This will enable the Compare button, which you can press to start the compare operation. You can select the Include storage... option to include the storage information such as tablespace names and initial sizes for new objects. These may differ across databases, so this may not always be appropriate.
When the compare operation is finished, the dialog will switch to the Differences tab page, which will show a list of all objects that are different:
This list is sorted in order of dependency. Below the list of different objects of the target user, you see the SQL that needs to be executed to make these objects equal to the corresponding objects of the current user. If no object is selected, the SQL of all objects is displayed. If one or more objects are selected, only the SQL for the selected object(s) is displayed. In the example above, a missing EMP_MGR_EMPNO check constraint was added to the EMP table.
The Show Differences button will show a visual line-by-line difference of the old and new source file of an object. This can be useful to view the changes made in Program Units, or can help you determine why a specific DDL statement was generated for other object types. The Configure External Difference Tool allows you to configure the difference tool should be used. By default the ExamDiff utility will be used, for which a Pro version is available (See the About item of ExamDiffs Info menu). See also Tools - Differences.
You can now press the Apply SQL button to execute this SQL in the target session. You can alternatively save the SQL in a file by pressing the Save SQL button, or you can copy it to the clipboard by pressing the Copy SQL button.
When objects are compared, the following properties are ignored:
·     Storage Properties such as the next extent and pct free of tables and indexes are not considered relevant for comparison.
·     Constraints with system generated names These constraints will have different names for the 2 users, so they cannot be compared. If a table is new in the target session, these constraints will be generated though.
·     Table creation properties Properties that would require the recreation of the table are ignored.
·     Table data To export table data, use the Export Table function (see Export Tables).
·     Sequence values The current value of a sequence is considered data.
/* END: cut and paste from PLSQL Developer Help */

This is on the list but not for 1.0.
-kris

Unable to delete User object in FIM Portal - Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"

Hi,
***Problem
I encounter a problem with FIM (version 4.1.3441.0 and 4.1.3496.0) when I try to delete a User object (and only a User object) whatever if it is
manually/Expiration Workflow/Powershell.
Deleting a User object used to be perfectly functional and, without any product version modification, stopped working. I haven't neither deleted/modified or add a
"Grant" MPR or any of the corresponding Sets since last time I saw it working.
Displayed error is "Request could not be dispatched" in FIM Portal and is referencing a stored procedure in Event Viewer.
***Error details
When I try to delete a User object, here is the output :
Portal
"Processing error" on submit
with the following details
Request status is stuck at "Validating" until next restart of FIM Service (after what it becomes “Canceled”)
Request’s “Applied Policy” tab does not contain any MPR where, at least, a “Grant” MPR is expected
As SQL Timeout is relatively high and error happens quickly, I don’t think there is a Timeout problem under that.
Logs
« Application »
The Portal cannot connect to the middle tier using the web service interface. This failure prevents all portal scenarios from functioning correctly.
The cause may be due to a missing or invalid server url, a downed server, or an invalid server firewall configuration.
Ensure the portal configuration is present and points to the resource management service.
« Forefront Identity Manager »
Reraised Error 50000, Level 16, State 1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements,
Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition" because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.Data.SqlClient.SqlException: Reraised Error 50000, Level 16, State
1, Procedure ReRaiseException, Line 37, Message: Reraised Error 1088, Level 16, State 12, Procedure CalculateRequestSetTransitionsAssembleStatements, Line 332, Message: Cannot find the object "#calculateRequestSetTransitionsAssembleStatementsPartition"
because it does not exist or you do not have permissions.
Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 1, current count = 0.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult
result)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ResourceManagement.Data.DataAccess.UpdateRequest(RequestType request, IEnumerable`1 updates)
   --- End of inner exception stack trace ---
Requestor: urn:uuid:7fb2b853-24f0-4498-9534-4e10589723c4
Correlation Identifier: e7209633-46d0-4f4b-a59e-807649ef71ea
Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: Other ---> System.InvalidCastException: Specified cast is not valid.
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier, UniqueIdentifier requestContextIdentifier,
Boolean maintenanceMode)
   at Microsoft.ResourceManagement.WebServices.RequestDispatcher.CreateRequest(UniqueIdentifier requestor, UniqueIdentifier targetIdentifier, OperationType
operation, String businessJustification, List`1 requestParameters, CultureInfo locale, Boolean isChildRequest, Guid cause, Boolean doEvaluation, Nullable`1 serviceId, Nullable`1 servicePartitionId, UniqueId messageIdentifier)
   at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Delete(Message request)
   --- End of inner exception stack trace ---
For information, a maintenance plan rebuild/reorganize indexes daily and this problem has occurred on servers with different performances.
Is any of you has already encounter this problem ?
Any help would be greatly appreciated,
Thanks in advance for your help,
Matthew

While there are several SQL Agent jobs (FIM Temporal Events, Maintain Sets, and Maintain Groups among others)created by the FIM install only one of those is enabled and scheduled and it calls all of the same stored procedures that the other
jobs do. Step 2 is Maintain sets and Step 3 is maintain groups. So the Maintain sets and groups jobs never need to get enabled and scheduled, but if you want them to be maintained more frequently then you can.
David Lundell, Get your copy of FIM Best Practices Volume 1 http://blog.ilmbestpractices.com/2010/08/book-is-here-fim-best-practices-volume.html

Links in User Object in aspx

Similar Messages

Maybe you are looking for