How to determine recordcount in BLOCKs
I am in a masterblock M and I want to dermine the recordcount from detailblock D.
I dont find a attribute with get_block_ property and I dont want to "Jump" in the detailblock. Is there an EASY possibility?
hi Oliver
I don't have a easy solution for this.. you can count the query_hits of the detail block using get_block_property.. however, if u insert or delete a record in the detail block, then it won't reflect in the query hits.. but as u already came to the detail block for inserting or deleting, u can go to the last_record, which in turn is the total record of the detail block..
thank u..
null
Similar Messages
-
How to determine the mount point for directory /tmp ?
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation -
How to determine logical database in a program?
Hello guys!
How to determine logical database in a program on Eclipse?
I have not found any options:
Thanks!Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh -
Anyone know how to determine Macbook Air screen tech? Causing migraines
Hi There,
Last year, I expereinced a lot of mild migraines which I've traced back to a new Macbook Air.
At first I had no idea of the cause (diet, stress etc) but have noticed that my eyes feel uncomfortable looking at the screen of my Macbook Air (I don't have this issue with my Dell monitor).
My eyes don't hurt per se, but I can detect a sublte jittering with the screen - which can turn into a migraine.
After doing a bit of research, it seems like most (but not all) LCD and LED LCD displays use something called pulse-width modulation to control brightness but after calling Apple support, they told me my MBA doesn't use this technology.
Does anyone know how to determine the underlaying technology in Apple displays so I can research the cauase of my headaches? I found a good Ukranian website (in english) that explained pulse-width modulation but it didn't really talk about other technologies.
Any pointers in the right direction would be much appreciated.
Cheers
BenWhat version of OS X are you using? If Yosemite, you need to update to 10.10.1 or higher.
In any case, start by going to the editor preferences>general, clicking this button and restarting the editor: -
How to determine whether a recordset is Empty or not ?
Please see my snippet code below :
<%
String sql="";
String username="CDS";
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:Employees","","");
Statement stmt = con.createStatement();
ResultSet rs=null;
sql = "Select * from Employee where code='" + username + "'";
rs = stmt.executeQuery(sql);
rs.next();
if (rs==null)
%>
<jsp:forward page="Login.jsp?msg=Username not recognized"></jsp:forward>
<%
else
%>
<jsp:forward page="Login.jsp?msg=Halo"></jsp:forward>
<%
catch(ClassNotFoundException e)
out.println("Driver not found");
catch(SQLException e2)
out.println(e2.getMessage());
out.println("<BR>");
out.println("Wrong SQL Statement");
out.println("<BR>");
out.println(sql);
out.println("<BR>");
%>How to determine whether a recordset has no result ?
From the above code, i use if (rs==null) and that's not worked.
Help me, guys.ResultSet rs = stmt.executeQuery(sql);
if (rs.next()) {
%>
<jsp:forward page="Login.jsp?msg=Halo"/>
<%
} else {
%>
<jsp:forward page="Login.jsp?msg=Username not > recognized"/>
<%
} -
How can I remove the blocked contacts from skype h...
Peace be upon you
How can I remove the blocked contacts from skype home and all skype features?I found this solution and it worked.
Paul B. Adams
Re: safari 6.0 flash problem (blocked plug in)
Jul 26, 2012 7:39 AM (in response to defconnect5)
I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
However, I did see two versions of Flash:
_Flash Player.plugin with old date
Flash Player.plugin with todays date
I deleted _Flash Player.plugin and this fixed the problem. -
Integration MIRO error, how to determine the VST related accounts.
integration Miro error.
Hi gurus,
please resolve the problem urgent.
while doing MIRO Iam getting the following error.
after given PO number in MIRO I getting the following error. please how to resolve the problem.
where i can determin the accounts, which accounts will be effect.
Error in account determination: table T030K key ASHA VST V0
Message no. FF709
Diagnosis
In the chart of accounts to be posted to, no accounts are defined for the tax code you used.
Procedure
Contact your system administrator.
Define the accounts to which a tax posting is to be made with the tax code entered in Customizing for taxes on sales/purchases.
To do this, choose Maintain entries (F5).
How to determine VSTI have already replied to the same question in one of ur earlier posts.
If you want to knowthe GL accounts which are used presently for the transaction VST, you can go to table T030K give the field name KTOSL value as VST and execute. YOu will get the list of all GL accounts which use the transaction VST for all possible tax codes and Chart of Accounts. -
How to determine the ROWNUM in a Master Detail Form
Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
ErickHello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM -
I've blocked certain photos showing up in facebook by accident, The toddler got click happy. How do I remove this block on certain photos?
You're welcome
-
How to query two data blocks simultaneously?
Dear all,
Need your inputs on the following problem statement...
Existing Functionality:
We have two data blocks A (Parent) and B (Child) in a relationship. Both data blocks refer to different tables.
Data block A is the query data block and for a single record in block A we can have multiple records in block B. Multiple records in block B are shown one at a time after executing a query, this is implemented by using a list item C (belongs to a third block).
For example
Let us say block B can have 5 different types of entries for each record in block A. In this case the list item C will have 5 values corresponding to these entries. Once the query is executed, block B will show the default entry for the queried record in block A. To see other entries for the record user can select the required value in list item C and corresponding entry in block B will be fetched.
Requirement:
Our requirement now is to enable querying upon both data blocks A and B simultaneously. To implement this I replaced data blocks A and B with a single data block X which is based on the join of the two tables referred by the Data blocks A and B earlier. As the fields should allow insert, update, delete operations we did not use a view here.
Issue:
Now the problem is, each record in block A for which block B had multiple entries earlier is now getting listed multiple times because of the join.
I have tried but could not find any solution for this. I would appreciate if any of you can suggest how we can query both blocks simultaneously without affecting the existing functionality.
Thanks,
AmitI don't understand your requirement in detail. I try to repeat what i understood so far.
You have a master-block A based on a table A and a detail-block B based on a table B. So far so good. You can now query based on conditions just the datablock A, because B is a detail and therefore can only be queryied in context of block A.
Your reuirement is to query on both blocks A and B and find block in B also without giving conditions for the relevant block A.
Is it that ?
What i don't understand, what is block C used for?
An idea for the querying of block B's data: Create Non-database-items items in block A for the search-criteria you need on block B and make them Queryable.
In the PRE-QUERY-trigger on block A build a WHERE-condition if that search-criteria is entered, something like
IF :BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B IS NOT NULL THEN
SET_BLOCK_PROPERTY('BLOCK_A', ONETIME_WHERE, 'WHERE PKVALUE IN (SELECT FKVALUE_TO_A FROM TABLE_B WHERE FIELDVALUE=' ||:BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B)');
END IF;This would query also records to A for which you want to have the B-records. So you could keep block-structure up to master-detail. -
How to determine most recent date from the date column of internal table
Dear friends
would you like to tell me. how i determine the most recently changed record by looking at date and time from internal table i am not supposed to sort the table by date and time... I must check date and time with other records date and time to determine which record is most recently changed...
here the scenario is.
id idnumber chdate chtime
1 123456 20060606 135312
2 123456 20060606 135900
3 123456 20060606 132300
4 123457 20060606 140000
5 123457 20060606 142500
in the above scenario i must keep in my mind that the most recently changed record is identical to its idnumber i can say that:
the record should be fetched this way
id idnumber chdate chtime
3 123456 20060606 132300
5 123457 20060606 142500
because here the id 3 is the most recently changed in the idnumber 123456
where id 5 is the most recently changed in the idnumber 123457
please help me to determin how i am supposed to carry out this task any suggestion, code will be great help of mine.
regards
NaimAfter testing my suggestion above, I realized that it doesn't work because the delete adjacent actually will keep the first one and delete the rest. I'm working with Srinivas's code a bit now, I think it is almost what you want. I am under the impression that you dont' want to HIGHest date/time, but just the last record of the sequence, if this is the case, then this code will help. Here we will assign an index to each record per the idnumber, that way we can sort it and get the lastest record.
report zrich_0001.
types: begin of itab_type,
id type i,
idnumber type i,
chdate like sy-datum,
chtime like sy-uzeit.
types: end of itab_type.
types: begin of itab_type2,
id type i,
idnumber type i,
index type i,
chdate like sy-datum,
chtime like sy-uzeit.
types: end of itab_type2.
data: itab type table of itab_type with header line,
itab2 type table of itab_type2 with header line,
prev_rec type itab_type.
data: v_id type i.
start-of-selection.
itab-id = 1.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135312'.
append itab. clear itab.
itab-id = 2.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '135900'.
append itab. clear itab.
itab-id = 3.
itab-idnumber = 123456.
itab-chdate = '20060606'.
itab-chtime = '142500'.
append itab. clear itab.
itab-id = 4.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '140000'.
append itab. clear itab.
itab-id = 5.
itab-idnumber = 123457.
itab-chdate = '20060606'.
itab-chtime = '120000'.
append itab.
clear itab.
<b> data: counter type i.
* Assign an index to each row per idnumber
loop at itab.
on change of itab-idnumber.
if sy-tabix > 1.
clear counter.
endif.
endon.
clear itab2.
move-corresponding itab to itab2.
counter = counter + 1.
itab2-index = counter.
append itab2.
endloop.
* Sort it and get rid of older records.
sort itab2 by idnumber ascending
index descending.
delete adjacent duplicates from itab2 comparing idnumber.</b>
read table itab2 with key idnumber = '123456'.
write:/ itab2-chdate, itab2-chtime.
read table itab2 with key idnumber = '123457'.
write:/ itab2-chdate, itab2-chtime.
Regards,
Rich Heilman -
How to determine cursorline in table control
Hi,
Every time an entry is inserted in the table control i need to put the cursorline in the next line.
It is ok while you are using the initial lines of the table control but when you use the scroll it is gone.
The complet scenario is:
- my table control is created with 5 lines.
- Every time the user inserts a line, a new line is created (so you will have always 5 lines behind to complete)
- when the 5th line is inserted, if you want to fill the 6tn you have to use the scroll
- In this moment is when i dont know how to determine the cursorline. It will be different depending how much de the scroll is moved. Maybe the correct cursorline is 5, or 3 or 2... Do you know how i can determine it? Is it possible?
Maybe the way would be to move the table control (scroll) one position and always cursorline would be 5, but i dont know if it possible neither.
Thank you,
ManelSorry misunderstood the question.
You will have to use the variable topline from the tablecontrol.
Edited by: Pedro Guarita on Feb 10, 2010 5:25 PM -
How do you find your blocked numbers in Contacts or on your iphone?
How do you find your blocked numbers in Contacts or on your iphone?
Is there a way to get a list of the blocked numbers?Hey jeff work,
Thanks for using Apple Support Communities.
This article should be exactly what you are looking for.
iOS 7: Understanding call and message blocking
http://support.apple.com/kb/ht5845
You can review your blocked list through one of the following locations:
Settings > Phone > Blocked
Have a nice day,
Mario -
How to determine IE type(32 bit or 64 bit) in a task sequence while updating Java
How to determine IE type(32 bit or 64 bit) in a task sequence
Hi,
Currently i have to update new version of Java after removing all the previous existing version of Java by using TS in SCCM 2007.
we have both 32 bit and 64 bit browser in the environment. I am stucked in determining whether the browser is of 32 bit or 64 bit.
How to determine IE type(32 bit or 64 bit) in a task sequence so that respective java can be installed for that IE browser.
will highly appreciate quick response.
Thanks in advance.
DayaBut you also need to install JRE x86 on x64 systems, since most people actually use the 32bit browsers on x64 systems.
The detection logic is actually pretty simple -- just check the right registry hive to find the installation location of the BIN\JAVA.DLL. Both pathnames are stored in HKLM\Software\JavaSoft\Java Runtime Environment\1.7 in the registry value "JavaHome",
but the x86 path is stored in the 32-bit hive and the x64 path is stored in the 64-bit hive.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
How to determine the target system during runtime of a Generic DS?
Hi Experts, good afternoon.
I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
Plese, help!!!
Thanks in advance!
Leandro VaniLeandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck.
Maybe you are looking for
-
Hi all, I have a question for you: customers having a lot of interfaces already developed with traditional ABAP methodology are asking me a list of GOOD reasons to move to XI any suggestion? Thanks in advance, Michele.
-
Grey dotted circle - music - HELP!
Hello guys, i have a problem that grey dotted circle appears next to my music in library. It is whole grey and when I sync it nothing syncs and I cant play the music on my iPhone! Help please!
-
Special Charecters handling using BODS flat file
Hi All, I have 2 sets of data one with no special charecters and one with Special Charecters in source. I have generated flat files(with UTF-8 code page bot hdata special charescters and no special chars) thruogh BODS in to a perticular path, when I
-
Can't open apps in Time Machine
In June we had a great electrical storm, and my i.Mac fried. Lucky for me the Maxtor external drive was OK, so I was able to get a total backup on to my replacement iMac and I lost not one thing.(three cheers for "Time Machine"). So I then reformatte
-
When I try to export photos from iPhoto, why does it truncate the title I have given the photo? For example, I have labeled it 2013RoxyCarousel. When saved to desktop, it reads 2013. The rest is omitted.