How to differentiate a report in different enviroments

hi,
As far as i concern/know that a report irrespective it belongs to a particular environment it is data independent i can justify my statement here we go we'll have test data in development system , replication of own old data in quality for testing in quality system and live/current data in production system
and i want to know are there any differences , ways to figure out the behaviour in three environments?

Yes, once a report is created in dev environment. All its properties hold true across landscape.
Accessing a report in any tool is independent of dev/Qua/Prod environment.
1 report can be opened / accessed in development but cant be accessed in quality?
>> It can be accessed in other system provided all necessary entities are available in the system where you want to access it.
For Ex: You created a object and it is being used in query in dev but u didnt send it in qua, now if you want to use the report and see the same object then you can't!
Hope it helps.
Regards,
Gaurav

Similar Messages

  • How to create a report with different page sizes

    Hi,
    I would like to create a report with different page sizes, it's possible to do it with diadem?
    When I change the layout parameters, changes afect to all sheets...
    Is there a way to change page size individually for each sheet?
    Thanks in advance.
    Marc

    Hi Marc,
    You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach.  This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
    ' Print PDF Page by Page.VBS
    OPTION EXPLICIT
    Dim i, Path, OldPrintName
    Path = AutoActPath & "2D Stacked"
    Call DataDelAll
    Call DataFileLoad(Path & ".TDM")
    PDFFileName = Path & " Page by Page.pdf"
    IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
    OldPrintName = PrintName
    PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
    PDFResolution = "72 DPI" ' "2400 DPI" , "default"
    PDFOptimization = TRUE
    PDFFontsEmbedded = FALSE
    PDFJPGCompressed = "high"
    PrintOrient = "landscape" ' orient paper
    Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
    PrintLeftMarg = 0.181
    PrintTopMarg = 0.181
    PrintWidth = 10.67
    'PrintHeigth = 7 (read-only)
    Call WndShow("REPORT")
    Call DocStart ' Begin multi-page document/print job
    FOR i = 1 TO 4
    Call PicLoad(Path & ".TDR")
    Call GraphSheetNGet(1)
    Call GraphSheetRename(GraphSheetName, "Page " & i)
    Call PicUpdate
    Call PicPrint("WinPrint") ' Add a page to be printed
    NEXT ' i
    Call DocEnd ' End multi-page document/print job
    PrintName = OldPrintName
    Call ExtProgram(PDFFileName)
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • How to share interactive reports between different users in apex.PLEASEHELP

    Hi all,
    How can we share the interactive reports in oracle apex within different users.Please help its really urgent..
    Thanks
    Manish

    Hello,
    I suggest you read the documentation and HOWTO's on Interactive Reports, since it is covered in there
    http://www.oracle.com/technology/obe/apex/apex31nf/apex31irr.htm
    basically configure the report how you want it (as a Developer) and then save it as the default for all users.
    If you mean something different, please elaborate
    Hope this helps,
    John.
    Blog: http://jes.blogs.shellprompt.net
    Work: http://www.apex-evangelists.com
    Author of Pro Application Express: http://tinyurl.com/3gu7cd
    REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone!

  • How to schedule multiple reports with different local to change static field language ?

    Hi all,
    we have requirement that we will place multiple schedule request on same server ,This schedule request will be different local setting with parameter value like: en-GB,en-US,Chinese...etc .We used translation Manager for this and it takes this parameter and change report language for static fields.
    problem is that ,on server it is not working properly,we tested for one report .if we pass prompt value to change local setting in report the we need to log off and login again in CMC to reflect new local or on BI Launchpad we need to refresh page then it shows new language.
    How we can do this with multiple scheduled report which will have different local value like en-GB,en-US,Chinese,German....?These schedule request are getting placed in server by one user .
    Please help us with sample code.
    Thanks
    Madan

    Hi,
    The only approach I can think of is to create a template report which uses variables
    For each column you would need to variable
    v_columnAName and v_columnAValue
    v_columnAName would have a if statement in it
    =if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
    v_columnA would have a if statement in it
    =if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
    This would only work when you had a small set of clients.
    This might be more managable if it was done in the universe
    Regards
    Alan

  • How can i  print reports to different printer by use Trigger on table after insert

    Hello,
    Please can any one tell me how can i print (any message) to different printer (network & local printer) by use Trigger on table after insert.
    regards,
    Linda.

    What you want to do cannot be done with PL/SQL, which does have any print utilities. However you could write something using Java Stored Procedures.
    Of course the "different printer" bit will have to be data driven as triggers are not interactive.
    rgds, APC

  • How to split the report into different versions view 1 agent delivery

    Hello
    I have a scenario where I need to send a dashboard to multiple users. The user information are stored in the table like the following:
    USER    Day     Car                  Pay Type                    Cost   Email
    USER1
    -10
    -2
    Honda
    Customer Pay
    500
    [email protected]
    USER2
    -4
    -1
    AUDI
    Customer Pay + Warranty
    1000
    [email protected]
    USER2
    -4
    -1
    PORSCHE
    Customer Pay + Warranty
    1000
    [email protected]
    Now I have a dashboard call Car, on this dashboard I have prompts like Date, Car, Pay Type, Cost, pretty much the same name as the columns in the above table. I have also set up session variables to pick up users based on the log in.
    Now for user2, he is getting 1 email, which is the dashboard with both Audi and Porsche on there. Instead, he wants to 2 attachments, 1 for Audi and 1 more Porsche. Is there a way to achieve this using 1 agent?
    Please let me know how to split the result sets based on user records in the table
    Thank you

    Hello,
    Thank You very much for the useful hint.
    Regards
    Aloha

  • How to differentiate PO's in different colors in abap editor

    Dear sir,
              I had created five Purchse request using ME51N Transaction.  I would like to write each PO in each color using ABAP editor.
    With Regards,
    Baskaran

    Hi,
    You can try the following,
    Get the PR's you have created into a internal table, by writing a select query.
    Before writing out the internal table fields, do the following
    loop at itab.
    if sy-tabix = 1.
    format color 1  intensified on.
              skip.
              write:/1 'field1',18 '-' , 20 itab-field .
              format color off.
    endif.
    if sy-tabix = 2.
    format color 2  intensified on.
              skip.
              write:/1 'field2',18 '-' , 20 itab-field .
              format color off.
    endif
    endloop.
    You can use up to 7 different colors  from 1 to 7.
    Regards,
    Vik

  • How to link child report in same reprot but in different tab

    Hi all i nXIR2
    iam able to pass parameters to child report in different report how to pass parameters and open it in same report in different tab?
    below link iam able to open in another report
    ="<a href=\"<Servername>:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?&stype=wid&Refresh=N&sWindow=New&sDocName=Details3&lsS2)Month:="If(DrillFilters([Month])="";"All Month";DrillFilters([Month]))"&lsS1)Year:="If(DrillFilters([Year])="";"All Year";DrillFilters([Year]))"&lsS4)Account:="If(DrillFilters([Cd])="";"All Codes";DrillFilters([Cd]))+"\">List</a>"
    any ideas please
    Thanks

    Hi Arjun,
    There is no hiding or conditional hiding tab functionality in DeskI, which would serve the purpose of your need.
    One option could be to open up the child report in the same window rather a new window.
    Thanks for the reply
    I dont want to hide any tab..
    i want to open a child report in same report in another tab... in web i
    i can use in same window but..... child report i needed have different columns...

  • How can I run the report for different input values at the same time?

    Reports version: Report Builder 6.0.8.13.1
    Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
    I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
    I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
    In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like “o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
    How can I run the report at the same time for all the input values and save the time?
    Thanks in advance.
    Kishore.

    Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
    and then atleast 4 or 6 reports will run simultaneously.
    For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
    Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
    http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
    Thanks
    Subodh

  • How to filter the data in different sections (e.g. Report Footers)?

    Hi,
    I am using Crystal Reports 11 to generate cross-tables.
    I plan to generate 3 cross-tabs, and each cross-table will be put in a section. For example, cross-tab1 in Report Footer a; cross-tab2 in Report Footer b; cross-tab3 in Report Footer c.
    I know use "Select Expert" to filter data. But, it seems that "Select Expert" filters data for the whole report.
    I want to filter the data for each cross-table separately. For example, filter cross-tab1 based on condition1; filter cross-tab2 based on condition2; filter cross-tab3 based on condition3.
    How to filter the data in different sections (e.g. Report Footers)?
    Thank you in advance.

    Hi,
    Now that you've inserted the subreport just right-click the sub-report and click Edit. The Design page for sub-report should open up.
    You can now insert the cross-tab on the Report Header and insert a record selection formula of your choice.
    Also, suppress all the other sections of the subreport so the Main report only shows the crosstab without any spaces.
    Do the same for all the subreports.
    -Abhilash

  • How to save each section report into different excel sheet?

    Hi all
    How to save each section report into different excel sheet?
    I have a report in which there are 4 sections north south west east now i need to save north in excel sheet 1 , south in sheet2, west in sheet3, and east in sheet4. under each section there is list report.
    Please let me know is it possible are not if possible let me no the procedure to be followed.
    Thank you

    If you're running XI 3.1 you might be able to solve this as follows.
    1. Create four users: east, west, north, south
    2. Create a profile that filters on the variable you used for the section/break
    3. Publish the report
    3.1 Set users created above to be the enterprise recipients
    3.2 Add personalization (the profile created above)
    3.3 Check the Deliver objects to each user in Destinations
    (3.4 You could use %SI_OWNER% to get a nice suffix to the report name)
    This should cause four reports to be created, each with its own "personalized" contents.

  • How to set different default interactive reports for different user groups?

    I'm probably overlooking an obvious solution, but how do I set different default interactive report for different user groups?
    For the same interactive report, I want one set of users to see a default where the default filter is based on column X. However, another group of users doesn't have authorization to see that column so I need to set the default filter to something else for them.
    Thanks

    You can set a filter on a report in a URL - would that help? I think with apex 4.x you can also link to a saved default report or alternative report...

  • How to create Report with different work sheets in XL Reporter

    Hi All
    I want to create a report in xl reporter where one report has multiple work sheets
    Regards
    Farheen

    Hi,
    There is no option to create report with different work sheets in XL Reporter. You may only use one sheet.
    Thanks,
    Gordon

  • How to color single column cells with different colors in classic report based different conditions

    Hi ,
      Am working on Oracle Apex 4.2 version. Am trying to generate a  classic report with different cell colors based on the conditions.
      I tried the solution provided in the below link.
      https://forums.oracle.com/message/9518723#9518723.
      I tried the same query given in that link.
       SELECT e.*,
      CASE
        WHEN sal < 1000
        THEN 'red'
        WHEN sal BETWEEN 1000 AND 2000
        THEN 'yellow'
        WHEN sal > 2000
        THEN 'green'
      END the_color
    FROM emp e
      And, I hidded the column 'the_color' in Report Attributes,
              the Column Template1 has the code , <td #ALIGNMENT# headers="#COLUMN_HEADER_NAME#">#COLUMN_VALUE#</td>.
    After this, what are the steps did I miss here. Because am not getting the report which I need.
    Kindly do provide solution.
    Thanks,
    yashu.

    SAL column values should visible with different color based on the conditions. Same way i did in my report it was working for me. Please refer the below links for more information,
    https://forums.oracle.com/thread/1047891
    http://dbswh.webhop.net/htmldb/f?p=BLOG:READ:0::::ARTICLE:351800346145832
    Thanks
    Lakshmi

  • HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

    How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

    Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
    Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Maybe you are looking for