How to disable all ssl checking - sec_error_ca_cert_invalid

Is it possible to disable all SSL checking of any kind within firefox?
I'm stuck with this error. (copied from another post) https://support.cdn.mozilla.net/media/uploads/images/2014-08-04-14-05-02-bc62ea.png
I have already set mozillapkix to false. I do not want to have to import self-signed certs for all my servers into firefox. I also deal with 'broken ssl', like incomplete certificate chains, etc.. on load balancers, or other odd devices.
I had a version of nightly that was working with mozillapkix set to false, but it looks like it auto-updated:( so it is at 33.0.2 now, and no longer likes my self-signed certs again. (Which reminds me I need to turn off auto-update if possible).
If there is no way to completely disable ssl checking in Firefox, is there a nightly build version, or prior build version (I forget what version this new ssl checking began), that I can use that will avoid this stringent ssl checking (why there is no 'add exception' is still confusing...)?

If this is a major headache, you can use the Extended Support Release version of Firefox 31. I believe the preference to disable use of PKIX still works in that version. You could test with the "Portable Apps" build first before switching.
More info on ESR: http://www.mozilla.org/firefox/organizations/
Portable build (unofficial) for testing: http://portableapps.com/apps/internet/firefox-portable-esr (uses its own local profile, exit your normal Firefox first)

Similar Messages

  • 5230: how to disable all automatic calling (intern...

    Another problem with my new 5230: I have a pre-paid card (Pay and Go, Proximus, Belgium).
    I left my phone standby (and ... the battery still doesn't last 1 day, see other post) all day.
    I checked the amount of pre-paid credit I had in the morning.
    I checked again a few hours later (and I did not use the phone): credit is decreased !
    Checked again a few hours later: credit still decreases. this is becoming very expensive (few Euro's a day) so here are my questions:
    -anyone any idea what can cause this?
    -anyone any idea how I can find out what causes this when no-one knows?    ;-)
    -how can I disable ALL possible "auto-connections" ?
    Thanks in advance.

    Hello!
    I have the 5230 NAM version unlocked on AT&T. When I first got my device after I would run Nokia Email Program the internet connection would remain active no matter what until I rebooted the device. This issue was resolved after upgrading to the newest version of Nokia Email.
    My advice run any updates to your firmware and software. (pertaining to nokia messaging or email).
    Make sure that even if you are closing Nokia email you select - GO OFFLINE option as well.
    Best Wishes From The USA!
    JM

  • How to disable CD-DRIVE checking, while using a Dolphin file manager

    Hello.
    I  would like ask for a help. I have one problem that's quite annoying. It is related to checking cd-drive when using a dolphin file menager. It always cheecks it when Dolphin is launched from K or launcher on taskbar for the first time, again it happens when i close it and open again.
    Is there a way to disable checking of cd-drive in Dolphin? This behaviour occurs on KDE with all linux system that i checked: Slackware, Arch, Kubuntu. Look at this:
    Disabling CD-DRIVE checking, while using a file manager
    I would like to disable it in order to speed up opening Dolphin, launching it.

    Udisks2 is what dolphin uses to handle external drives of all kinds (USB, optical, etc).  Udisks is an automounting tool that allows normal users to mount disks.  The permission handling before was handled with consolekit and has now been replaced by systemd-logind (which is much better anyway).  So what I am suggesting is that it might be that dolphin is using udisks2 as the tool that polls for the existence of a disc in your optical drive.
    Unfortunately, it is a bit more confusing than that because udisks2 is the replacement for the original udisks.  It is totally different and not compatible.  So I remember seeing a way to turn off optical drive polling, but I cannot remember if it was udisks or udisks2.  But it was done with a udev rule. 
    So I think if you tried to google for "udisks optical (or cd or dvd) polling" or something like that, you might be able to figure out how this is done.
    Edit: unfortunately, I do not use dolphin or udisks2.  But I do have the original udisks installed.
    Edit2: It seems that the method I remembered is for the original udisks.
    Last edited by WonderWoofy (2013-07-25 17:51:56)

  • How to Disable InfoUpdate(spinf) check for PO creation

    Dear All,
    I got requirement to Disable InfoUpdate(SPINF) check when PO is created(ME21n).
    Long back for this Project our Team did some configuration(SPRO) for Order Type (Standard PO) this InfoUpdate(SPINF) should be checked by default.
    But know they don't want to create a PO with InfoUpdate(SPINF) check for ONE specific Plant(EKPO-WERKS).
    I tried to find User Exit and BAPI, But I not able to find the exact one to Disable InfoUpdate(SPINF) check based on the condition Plant(EKPO-WERKS).
    So, can some one give me solution to Disable InfoUpdate(SPINF) check.
    Thanks in advance.
    Regards,
    Venkat Ram

    Hi Guys,
    Any help? Any exits/BADIs/enhancement spots that I can use?

  • ALV GRID-how to select all the check boxes using push button

    Hai All,
    I displayed ALV grid & every record contains one check box as first column.
    If user clicks on one push button all the check boxes needs to selected.
    Could any one tell me how to do this?
    Regards,
    Bhaskar

    Hi Bhaskar,
       Try this code :
    *" Table declarations...................................................
    TABLES :
      spfli.                              " Flight Schedule
    *" Data declarations...................................................
    Work variables                                                      *
    DATA :
      w_checkbox  TYPE c,                  " Check Box
      w_checkbox1 TYPE c,                  " Check Box
      w_lineno    LIKE sy-lilli,           " Current Line No
      w_lines     TYPE i.                  " No. Of Records in Int.Table
    Internal table to hold Flight Schedule data                         *
    DATA :
       t_spfli LIKE
      STANDARD TABLE
            OF spfli.
    Structure to hold Function Codes                                    *
    DATA :
      fs_fcode LIKE LINE OF t_fcode.
                          TOP-OF-PAGE EVENT                             *
    TOP-OF-PAGE.
      PERFORM top_of_page.
                       START-OF-SELECTION EVENT                         *
    START-OF-SELECTION.
      PERFORM fetch_spfli_data.
      SET PF-STATUS 'YMENU1'.
      DESCRIBE TABLE t_spfli LINES w_lines.
      fs_fcode = 'EXIT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'SELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'DESELECT'.
      APPEND fs_fcode TO t_fcode.
      fs_fcode = 'RETRIEVE'.
      APPEND fs_fcode TO t_fcode.
                        AT USER-COMMAND EVENT                           *
    AT USER-COMMAND.
      PERFORM user_command.
    FORM top_of_page .
      WRITE :/50 'Flight Schedule Information'(008).
      ULINE.
      FORMAT COLOR 1.
      WRITE :/10 'Carrier ID'(001),
              25 'Connection ID'(002) ,
              43 'Airport From'(003),
              59 'Airport To'(004),
              74 'Departure Time'(007),
              93 'Arrival Time'(011),
             106 space.
    ENDFORM.                               " FORM TOP_OF_PAGE
    FORM fetch_spfli_data .
      SELECT carrid                        " Carrier ID
             connid                        " Connection ID
             airpfrom                      " Airport From
             airpto                        " Airport To
             deptime                       " Departure Time
             arrtime                       " Arrival Time
        FROM spfli
        INTO CORRESPONDING FIELDS OF
       TABLE t_spfli.
      IF sy-subrc EQ 0.
        PERFORM display_spfli_data.
      ENDIF.                               " IF SY-SUBRC EQ 0
    ENDFORM.                               " FORM FETCH_SPFLI_DATA
    FORM display_spfli_data .
      SORT t_spfli BY carrid ASCENDING.
      LOOP AT t_spfli INTO spfli.
        FORMAT COLOR 2.
        WRITE :/2 w_checkbox AS CHECKBOX,
                  spfli-carrid   UNDER text-001,
                  spfli-connid   UNDER text-002,
                  spfli-airpfrom UNDER text-003,
                  spfli-airpto   UNDER text-004,
                  spfli-deptime  UNDER text-007,
                  spfli-arrtime  UNDER text-011.
      ENDLOOP.                             " LOOP AT T_SPFLI...
    ENDFORM.                               " FORM DISPLAY_SPFLI_DATA
    FORM user_command .
      CASE sy-ucomm.
        WHEN 'SELECT'.
          w_checkbox1 = 'X'.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'DESELECT'.
          w_checkbox1 = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno.
            IF w_checkbox = '*'.
              CONTINUE.
            ELSE.
              MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
            ENDIF.                         " IF W_CHECKBOX = '*'
          ENDDO.                           " DO W_LINES TIMES.
        WHEN 'RETRIEVE'.
          w_checkbox = ' '.
          DO w_lines TIMES.
            w_lineno = sy-index + 3.
            READ LINE w_lineno FIELD VALUE w_checkbox INTO w_checkbox.
            IF w_checkbox = 'X'.
              PERFORM fetch_sflight_data.
              PERFORM display_sflight_data.
            ENDIF.                         " IF W_CHECKBOX = 'X'
          ENDDO.                           " DO W_LINES TIMES.
      ENDCASE.                             " CASE SY-UCOMM
    ENDFORM.                               " FORM USER_COMMAND
    This report gives you the SPFLI Data and places a check box in front of each record. When u click on select all button it will select all the records. And if you click on deselect all it will deselect all the records. When you are trying this maintain the pf-status 'YMENU1' and give the function codes as in the code.
    Regards,
    Swapna.

  • [SOLVED]how to disable all antialiasing

    I am using openbox, xfce4-panel, firefox. How can I disable all antialiasing of fonts on my computer? I know I can change in the .Xdefaults to make urxvt not antialiased, and i'm sure some other applicaiton specific settings but am looking for a system wide solution.
    Last edited by blodorn (2009-07-20 03:00:10)

    Thank you, I added this to ~/.fonts.conf and everything is great now.
    <match target="font">
    <edit name="antialias" mode="assign">
    <bool>false</bool>
    </edit>
    </match>

  • How to disable login mail checking?

    I would like to disable the mail checking on each login: I am not interested in seeing "No new mail" or else each time I login in a console. In other distributions, there was a specific setting in /etc/login.defs:
    MAIL_CHECK_ENAB = no
    I do not find this option in the arch /etc/login.defs, nor it is mentioned in man login or man login.defs; trying to set it anyway results in login complianing about badformed configuration file.
    I also tried to comment out both MAIL_DIR and QMAIL_DIR, but without success.
    Is there an other method to get this result? Thanks in advance for your help.

    I have finally solved this issue, after only 4 months (it was my first issue using archlinux). Since the most part of shadow functionality is managed by pam, /etc/login.defs is not used at all. I had to edit /etc/pam.d/login. I had to comment out this line in that file:
    # session optional pam_mail.so dir=/var/spool/mail standard
    I am very satisfied, I hated those unuseful "No new mail"

  • How to Disable Country Specific Checking for IT0021

    Hi
    I'm implementing PA for three countries.
    Client requires a common infotype be used across countries. For France and Italy I'm not able to set the IT0021 to the standard one. As SAP by default uses the Cpountry specific Infotpe.
    How to Disable this feature of SAP.
    - Aravind

    use the same Screen for the rest of the countries
    check P0021 in PE03 
    and check the number assigned to the screen
    if u want the screen number check system status and module pool number
    V_T582L for country specific
    V_T588M this for Module pool
    Edited by: Sikindar on Jan 16, 2009 8:54 AM

  • Checkbox item: How to get all values checked?

    See http://htmldb.oracle.com/pls/otn/f?p=24317:46
    The report query is simply
    select
    'One' one,
    'Two' two,
    'Three' three,
    'Four' four
    from dualThe checkbox item is a named static LOV with STATIC2:ONE,TWO,THREE,FOUR and a Source value of ONE:TWO:THREE:FOUR so that all boxes appear checked when the page is first rendered.
    All the 4 columns have a column condition like
    instr(':'||:P46_COLS||':',':ONE:') > 0to ensure that column is rendered only if the corresponding checkbox is checked.
    The report has Dynamic column headings with the following PL/SQL function body
    return 'ONE:TWO:THREE:FOUR';To my (pleasant) surprise, this works very nicely. When column TWO is conditionally not rendered, its corresponding column heading is also skipped with no effort on my part. Nice.
    Question:
    Instead of "hard-coding" that string ONE:TWO:THREE:FOUR in the 2 places I mentioned above (checkbox item source and report heading), is there a way to access the "all values checked" version of that LOV item so that it will dynamically pick up the latest LOV changes? The way I have done it currently, if I change the named LOV, I need to also change those 2 places where I have hardcoded the values.
    Any ideas? Thanks

    Scott:
    I thought about that but the LOV has dozens of values, each with a verbose display value and a return value of the column name (upto 30 characters) and the display values are still being "worked on" by the users.
    So, the "all columns" string would be a big, unweildy string that would be hard to edit.
    It is much easier to edit, resequence and generally work with a Shared Component LOV defined as a Static LOV because you get that nice page (4000:4111) where you can read everything nicely formatted instead of a STATIC2:<big long string>!
    Can I have my cake and eat it too?!
    Thanks

  • How to disable and enable Check box based upon condition

    Hi,
    I wants to disable/hide the check box field before the required field is filled.   Kindly help me

    Hi Mohammed,
    Try to use customize InfoPath form, add rules. Go to list tab, click customize Form, then this opens the list form in InfoPath
    format.
    1.Select the check box field control, click add rules, select if is blank, show validation error action.
    2.Then go to conditions, click column name is blank, change it to the required column you want.
    3.Go to rule type, click validation, change it to formatting, select hide this control.
    4.Publish the InfoPath form.
    Best Regards.
    Kelly Chen
    TechNet Community Support

  • How to disable  all constraints on a table

    Hi ,
    I want to disable all constraints on a table
    select 'ALTER TABLE '||substr(c.table_name,1,35)||
    ' DISABLE CONSTRAINT '||constraint_name||' ;'
    from user_constraints c
    where c.table_name = MY_table;
    thanks in advance

    What is wrong with query you have?
    Why do you have substr around the table name?
    If you want to execute the output as well, do this,
    SET SERVEROUT ON
    BEGIN
       FOR i IN (SELECT 'ALTER TABLE ' || c.table_name || ' DISABLE CONSTRAINT ' || constraint_name AS l_sql, table_name, constraint_name
                   FROM user_constraints c
                  WHERE c.table_name = my_table_name)
       LOOP
          EXECUTE IMMEDIATE i.l_sql;
          DBMS_OUTPUT.PUT_LINE ('Disabled constraint ' || i.constraint_name || ' on table ' || i.table_name);
       END LOOP;
    END;
    /

  • How to disable all Constraints for a Table

    Hi There,
    So I have a table that I need to delete a significant amount of records from. Using some advice I found it better to select the records that I wanted to keep into a temporary table and then truncate the original table. After that I insert the contents of the temp table into the original table.
    So now I am thinking I could speed this up even more if I disable all the constraints on the original table.
    Is there an easy way to do this or do I need to disable each constraint individually?
    thanks
    John

    http://forums.oracle.com/forums/search.jspa?threadID=&q=disable+all+constraints+&objID=c84&dateRange=all&userID=&numResults=15

  • How to disable Outlook for checking for IMAP/POP3 Certificate Name Mismatch?

    I have outlook clients that are connected to an IMAP/POP3 server that's off-site provided by company A.
    Company A requires me to enter imap.companya.com for imap server address and 993 for the port.
    I must also enable SSL for the connection.
    When I do this, Outlook pops up an error message (shown below), that must be reacted to every time it checks for mail.
    The reason is that the certificate is for myserver.companya123.com and that's different than imap.companya.com but company A wont change it. They said I need to disable my email programs certificate check so it doesn't keep prompting
    me. Now I can do this with my iphone, and other email programs without incident. But I cannot find where to disable it in outlook.
    If I change the imap server address in my account settings for outlook to instead use myserver.company a123.com, outlook can't connect and as the vendor said I must use imap.companya.com as the imap server address.
    I need to be able to connect via SSL (so nobody can swipe my password over the wire) but not have to react 1000x a day to the certificate warnings.
    I don't want to use Eudora, or another email client that allows me to easily disable the warning. I want to use outlook. How do I set outlook so it doesn't keep popping up these certificate server name mismatch warnings?
    I spent days searching for a fix, and it seems there are fixes via the registry for just about every type of certificate issue, but NOT THIS PARTICULAR ONE.
    I am hoping someone knows exactly what I am talking about and knows of a easy fix. I must use SSL so please don't tell me to disable SSL.
    What I need is to disable outlook from presenting that alert. That's what I need to do. No other solution will suffice. I hope outlook does not have a product limitation that prevents such a thing from being done. I am ok with a registry fix if need be, but
    being able to disable outlook from presenting certificate name mismatch alerts is critical. Hope its possible! Thanks!

    Hi,
    I would suggest we try the registry key mentioned in this
    article (Method 4) to configure Outlook to allow the connection to the mismatched domain name, and see if it works:
    HKEY_CURRENT_USER\Software\Microsoft\Office\<var>xx</var>.0\Outlook\AutoDiscover\RedirectServers
    Let me know if this doesn't work.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Oracle Service Bus business service - How to disable XML content check.

    Hi All,
    Dear Experts I have the necessity to disable the check on the XML content when message is forwarded to external system by on Oracle Service Bus Business Service to avoid that the XML content as string that I inserted in message is wrapped with the CDATA[[.
    Thanks a lot,
    Mike

    There is no explicit option to disable the check on the XML content.
    But the you can use Messaging Service of type Text request which will consider the data as string and so there will be no check.
    If you want to use WSDL/AnyXML/AnySOAP proxies, the XML check is always carried when the $body varaible is not checked/modified when content streaming is enabled while creating the proxy. I'm quite sure HTTP transport supports content streaming and the stream from the input is directly given to BS with out realizing the XML. Only short coming is it should be a pure pass through and no data enrichment and any action in pipeline that requires realizing the XML from the stream.
    Let me know if this helps.
    Thanks
    Manoj

  • How to disable all fields of a page on button click

    Hello, I am using JDeveloper 11.1.2.3.0
    I have a page with several fields on it. I want to have all the page fields disabled when I click a certain Button. How can I achieve this?
    If what I am asking is too difficult to achieve can you help me with an idea on how to achieve something similar?
    Thank you

    This can be achieved by using JavaScript Client API get the id's all the fields while clicking the button  and disable your Components,
    Calling Backing bean method or binded component involves server side round-trip, you can easily achieve this using simple java script in
    Client Side..
    Call this method in your Client Listener ..
    function disableFields(actionEvent) {
            var field1= AdfPage.PAGE.findComponent("field1id");
            var field2 = AdfPage.PAGE.findComponent("field2id");
            field1.setDisabled(true);
            fileld2.setDisabled(true);

Maybe you are looking for