How to disable auto charge of iPhone via PC?

I'm thinking you may have the concern of not overcharging or messing with charge cycles of your phone, but according to apple the Li-ion batteries in iDevices work this way for example
-Your phone has 50% battery left, you charge it
-after using again, you're back with 50 and charging it till full once again makes it 1 charge cycle
Doesn't work like nickel batteries.
Here's the article:
Www.apple.com/batteries for some
Battery care tips.

Similar Messages

How to disable auto charge via usb?

So the question is as that: is it possible to disable auto charge when plugging iphone to the macbook in order to save the battery of macbook.
Tried everything but couldn't find any solution. Moreover it seems like I was questioned something like "permit to charge iPhone via usb?" when I first plugged it to the Mac, but I'm not sure
Thanks alot for any help!!

I am reasonably sure since there are no hidden menus to enable this.

Disable auto charge via usb

So the question is as that: if it's possible to disable auto charge when plugging iphone to the macbook in order to save the battery.
Tried everything but couldn't find any solution. Moreover it seems like I was questioned something like "permit to charge iPhone via usb?" when I first plugged it to the Mac, but I'm not sure
Thanks alot for any help!!

Ahh, I understand. Unfortunately, I'm not aware of a solution to the problem, other than not plugging the iPhone into the laptop while the laptop is unplugged. There are cables you can get that prevent syncing when you plug in while allowing the iPhone to recharge, but I'm not aware of anything that works the other way around. Maybe someone else will have an idea.

How not to charge the iphone via USB

I was wondering if it is possible not the charge the iphone while it is plugged to the USB port of my laptop. I am just asking that as sometimes I just want to add new songs/apps without actually charging my iphone via the USB port as I prefer to do it once the battery is at 10% .
Many thanks in advance for your help/advices.
Regards
Alberto

In a word, no.
There is no harm with charging a lithium based battery more frequently and when at any battery level and without having to charge the battery to 100% when doing so.

How to Disable "Auto Align" in [System Pref.] - [Display] - [Arrangement]

Does anyone know How to Disable "Auto Align" in [System Preferences] -> [Display] -> [Arrangement]?
It always want to align the two screens from the top when they are lined up close together and I need them to be aligned from the bottom. Since the resolution heights are so close together (1080 & 1050) it does not allow one to align side by side from the bottom as it prioritizes top alignment.
I guess I'm looking for a script to disable this feature.

Anyone got any ideas?

How to disable auto clear feature in a text box in IE10

How to disable auto clear button in Text box in IE10
Hi Team,
I saw this question on Microsoft forum but I did not find any reply to this question, therefore, I am re-posting it.
When I run web interface application on IE10, i see there is a new feature which has 'X' at the end of text box and on clicking it it clears the text.
Are there any settings of IE10 that can be changed to disable it or some code snippet?
I find the 'X' sign at the end of text box very annoying and would like to turn it off and make it compatible with older versions of IE and other explorers.
Looking forward to your answer at the earliest.
Regards
Sakshi

Hi,
Please try the steps in the following thread to see whether it could help:
Remove IE10's “clear field” X button on certain inputs?
http://stackoverflow.com/questions/14007655/remove-ie10s-clear-field-x-button-on-certain-inputs
Regards,
Vincent Wang
TechNet Community Support

I am trying to charge my iphone via a cable, but it doesnt work

I am trying to charge my iphone via a usb cable, but it doesn't work. If I update the software onto my laptop it says failed, and try contacting your products company

Hi there Help629,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
-Griff W.

How to disable air play on Iphone 5s

How to disable air play on Iphone 5s so I can use fire/HDMI adaptor to see on TV

Hello! You should contact Business Insider with this tip. I bet there are millions of people who don't know how to toggle between Shuffle and straight play. Until a moment ago, I was but one :) thanks!

How to disable auto sign in

how to disable auto
signin

Hi, Dominic; yes, I tried that x2 or 3.
Finally called Apple; eventually realized I needed to re-launch Safari after deselecting autofill users and p-words.
But thank you for your help!

Refund amount and disable auto charge for subscrip...

Hello , Here is my order number ****************272
Please refund the amount and how can i disable auto recharge option ? I want it for USA but unfortunately subscribed for UK .. Please help
Thanks

You can use the links below to view and control any possible recurring charges:
Subscriptions: (Cancel any subscriptions you may be a part of)
https://secure.skype.com/account/call-phones/packages
Usage History (6 months):
https://secure.skype.com/account/usage
Billings & Payments: (If enabled, disable Auto-Recharge)
https://secure.skype.com/account/payment/atu/entry
Purchase History: (Every payment you've made since you had the account)
https://secure.skype.com/wallet/account/orders
Skype Number (Under settings, cancel any recurring number subscriptions)
https://secure.skype.com/account?page=onlineNumber
Once complete, request a refund for unused/unauthorised services
https://support.skype.com/en/faq/FA297

How to Disable Auto Updates on Flash Player 10 using mms.cfg

Hi Friends,
I am a newbee into this.I am trying to install a customized Adobe Flash Player 10.2.153.1 in which auto updates are disabled. I went through the Adobe guidelines and found that it is possible to do the same using a MMS.CFG file. Can anyone tell me how exactly this would look like. I will be extremely thankful if someone can attach a sample of the same.
One more question...
When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
Tries from my end till now:
I tried to create a mms.cfg by editing a txt file and adding "AutoUpdateDisable=0 " and then saving teh same as mms.cfg using UTF-8 encoding. this didnt make any difference in the Global Settings manager.
Please help me...
Regards,
Dilip

http://kb2.adobe.com/cps/167/16701594.html
But it seems that you have done everything correctly; doesn't it work?
dilzmail wrote:
One more question...When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
No, I don't think so; these settings are stored in a different place.
Some users have reported that AutoUpdateDisable via mms.cfg does no longer work in Flash Player 10.3. Please check if this failure already occurs in Flash Player 10.2.

How to disable auto updates

How does one disable "check for automatic updates" in Java 6, version 17? On the Update tab, the box is checked, but it is grayed out and won't let me un-select it.
Thanks for any help.

http://kb2.adobe.com/cps/167/16701594.html
But it seems that you have done everything correctly; doesn't it work?
dilzmail wrote:
One more question...When we disable auto updates using mms.cfg file, will this be updated in the Global Settings Manager ?
No, I don't think so; these settings are stored in a different place.
Some users have reported that AutoUpdateDisable via mms.cfg does no longer work in Flash Player 10.3. Please check if this failure already occurs in Flash Player 10.2.

How to Disable battery charging Function?

Hi;
I have a question about charging funtion of my "HP Compaq Business Notebook, 6720s":
How can I disable "battery charging" function in windows 7? Is there any "advanced setting change" or "software" that while battery is in its slot, stop my notebook from charging its battery?
Thanks

After some days trying many methods, yet I haven't find a solution to my problem. Then I ask is there any one
knows which software should I download for HP Compaq Power Management (similar to the software that Huffer
mentioned, but that was for Lenovo) or which registery or BIOS change should I do , so that I can manually disable
charging function of laptop, or at least put a starting level that up to that level, laptop won't start
autolatically to charge battery, because in this manner once that my Battery reaches to below 100%, instantly begin
to be charged & it would decrease its life time. Please consider that because of my power cable is to some damaged, sometimes it suddenly disrubt & cause my laptop abruptly shut down, then necessarily the battery would always be connected tob prevent this suddent effect.
If any one could help me, I would appreciate him a lot.
Regards

[SOLVED] Alsa: How to disable auto-mute when plugging in headphones?

I have a set of headphones plugged into my workstation permanently (the headphone jack is hard to reach so I don't want to plug those headphones in and out) as well as some speakers. Jack sensing works perfectly - when I unplug the headphones, the speakers are unmuted and when I plug the headphones back in the speakers are muted. Now as I said, my headphones are plugged in permanently and occasionally I want to have sound on the speakers at the same time. So far I have not found a way to have both headphones and speakers unmuted simultaneously.
I originally thought this was a problem with Pulseaudio (I am using Cinnamon as my desktop) but when I directly go to the Alsa hw device I get exactly the same behavior. The sound chip is a built-in VIA VT1818S and aplay displays the correct cards and devices:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: VT1818S Analog [VT1818S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: VT1818S Digital [VT1818S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 2: VT1818S HP [VT1818S HP]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
I verified with "mpg123 -a hw:0,0" that I get no sound on the speakers when the headphones are plugged in and vice versa. I tried a lot of different settings with alsamixer and amixer to no avail. These are my current settings:
$ amixer -c 0 contents
numid=42,iface=CARD,name='Front Headphone Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=44,iface=CARD,name='Front Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=46,iface=CARD,name='HDMI Phantom Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=45,iface=CARD,name='Line Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=40,iface=CARD,name='Line Out CLFE Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=38,iface=CARD,name='Line Out Front Jack'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=41,iface=CARD,name='Line Out Side Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=39,iface=CARD,name='Line Out Surround Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=43,iface=CARD,name='Rear Mic Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=47,iface=CARD,name='SPDIF Phantom Jack',index=1
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=37,iface=MIXER,name='Master Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=36,iface=MIXER,name='Master Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=23
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=13,iface=MIXER,name='Headphone Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=12,iface=MIXER,name='PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=11,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=28,iface=MIXER,name='Front Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=24,iface=MIXER,name='Front Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=23,iface=MIXER,name='Front Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=2,iface=MIXER,name='Front Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=1,iface=MIXER,name='Front Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=4,iface=MIXER,name='Surround Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=3,iface=MIXER,name='Surround Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=6,iface=MIXER,name='Center Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=5,iface=MIXER,name='Center Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=8,iface=MIXER,name='LFE Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=7,iface=MIXER,name='LFE Playback Volume'
; type=INTEGER,access=rw---R--,values=1,min=0,max=42,step=0
: values=42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=26,iface=MIXER,name='Line Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=25,iface=MIXER,name='Line Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=31,31
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=16,iface=MIXER,name='Capture Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=18,iface=MIXER,name='Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=15,iface=MIXER,name='Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=17,iface=MIXER,name='Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=0,0
| dBscale-min=-16.50dB,step=1.50dB,mute=0
numid=14,iface=MIXER,name='Loopback Mixing'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=35,iface=MIXER,name='IEC958 Default PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=31,iface=MIXER,name='IEC958 Playback Con Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0xff AES2=0x00 AES3=0x00]
numid=32,iface=MIXER,name='IEC958 Playback Pro Mask'
; type=IEC958,access=r-------,values=1
: values=[AES0=0x0f AES1=0x00 AES2=0x00 AES3=0x00]
numid=33,iface=MIXER,name='IEC958 Playback Default'
; type=IEC958,access=rw------,values=1
: values=[AES0=0x04 AES1=0x00 AES2=0x00 AES3=0x00]
numid=34,iface=MIXER,name='IEC958 Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=30,iface=MIXER,name='Dynamic Power-Control'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'Disabled'
; Item #1 'Enabled'
: values=0
numid=29,iface=MIXER,name='Independent HP'
; type=ENUMERATED,access=rw------,values=1,items=2
; Item #0 'OFF'
; Item #1 'ON'
: values=0
numid=19,iface=MIXER,name='Input Source'
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Rear Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'Stereo Mixer'
: values=1
numid=20,iface=MIXER,name='Input Source',index=1
; type=ENUMERATED,access=rw------,values=1,items=4
; Item #0 'Rear Mic'
; Item #1 'Front Mic'
; Item #2 'Line'
; Item #3 'Stereo Mixer'
: values=0
numid=27,iface=MIXER,name='Rear Mic Boost Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=3,step=0
: values=0,0
| dBscale-min=0.00dB,step=10.25dB,mute=0
numid=22,iface=MIXER,name='Rear Mic Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=off,off
numid=21,iface=MIXER,name='Rear Mic Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0
: values=23,23
| dBscale-min=-34.50dB,step=1.50dB,mute=0
numid=10,iface=MIXER,name='Side Playback Switch'
; type=BOOLEAN,access=rw------,values=2
: values=on,on
numid=9,iface=MIXER,name='Side Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=42,step=0
: values=42,42
| dBscale-min=-63.00dB,step=1.50dB,mute=0
numid=49,iface=PCM,name='Capture Channel Map'
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=50,iface=PCM,name='Capture Channel Map',index=1
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=48,iface=PCM,name='Playback Channel Map'
; type=INTEGER,access=r----R--,values=8,min=0,max=36,step=0
: values=0,0,0,0,0,0,0,0
| | TLV size error (257, 8, 0)!
numid=51,iface=PCM,name='Playback Channel Map',device=1
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
numid=52,iface=PCM,name='Playback Channel Map',device=2
; type=INTEGER,access=r----R--,values=2,min=0,max=36,step=0
: values=0,0
| | TLV size error (257, 8, 0)!
If I read the Alsa kernel docs right, the VIA driver simply does not provide any option to disable auto-muting: http://git.alsa-project.org/?p=alsa-ker … xt;hb=HEAD.
I would be glad if I had misread/misunderstood something or there were any other means of achieving what I am after? All I found so far is lots of posts where auto-muting did not work but very few people seem to want the opposite. FWIW, my old installation of Ubuntu 11.10 was working fine in that regard, i.e. it probably did not support auto-muting for my hardware.
Last edited by fax (2013-03-24 20:20:19)

Solved, well, good enough for me anyway. In alsamixer, I enabled "Independent HP". Independent HP means that two of the six surround channels get diverted to the headphones. Alsa creates a second device, one for line out and the other one for the headphones. It is a very neat feature that is meant to allow you to e.g. do a voice call with your headphones while you play music through the speakers at the same time. I can now choose in PulseAudio whether I want output to my headphones or the speakers. It required that in /etc/pulse/default.pa, I added the line "load-module module-alsa-sink device=hw:0,2" after this paragraph:
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
# Take Independent HP into use.
load-module module-alsa-sink device=hw:0,2
All this really is a work-around for two bugs:
Call it a bug or a missing feature, but it does not look like the Alsa snd_hda_codec_via driver allows to disable auto-muting.
Before the change to default.pa, PulseAudio already allows me to switch between two output devices - "analog output" and "analog headphones". "Analog headphones" however does the same thing as "analog output" and plays sound on the external speakers and not the headphones. I suspect that the PulseAudio module-udev-detect detects both Alsa devices but wires them wrongly.
The above still doesn't give me what I originally asked, i.e. sound on both speakers and headphones at the same time, but I realized that I don't really need that. I just need a way to switch on speakers occasionally while my headphones are plugged in.
Last edited by fax (2013-03-24 23:06:27)

How to disable auto connect feature in SQLDeveloper's connections manager

Hi Guys,
I work with SQLDeveloper 2.1.1 (Patch 1)
It attempts to connect to the target always after you Right click on saved connection from within the connections' manager list.
Does any one know how to disable that auto connect feature in SQLDeveloper?
Any help would be appropriated.
Cheers!!

Hi, a good question:
Here's my list of extensions installed:
- Open Insider View (4thelephant) Insider SQLDeveloper
- Oracle SQLdeveloper data modeler viewer
- Oracle SQLdeveloper Migrations - MS Access
- Oracle SQLdeveloper Migrations - MySql
- Oracle SQLdeveloper TimesTen
- Versioning support.
That's all what i can see in extensions window.
Cheers!!
eMarcel

How to disable auto charge of iPhone via PC?

Similar Messages

Maybe you are looking for