How to disable email option when creating a form

I am creating a pdf flyer in either Pro or LiveCycle. And I want to provie a space for people to enter their personal information (form fields).
I want them to be able to save this and print it. I don't want to give them a submit option (to send via email). (So I will be "distributing" the form - and I can't Distribute without providing an email.)
I know I can remove the Submit button from the form, but even when there is no Submit Button, when you open the form in READER (which most will be using), Reader itself provides an option to Submit form.  How do I prevent this??
Or, is there any way to create a fillable form that will allow others to save without "distributing" the form? I am thinking the "distributing" is what is causing the email to be linked to the form.
I hope I have explained this well. Any direction would be appreciated.
Thanks!

You have a point, if your users are filling the form in with Reader, they won't be able to save the data with the form unless the form has been "Reader Extended" (which enables this functionality in Reader for the particular form)
If you have Acrobat Pro, you can "extend" the form before you send it to the users.  The following is from the Acrobat Pro help...
Enable Reader users to save form data
Ordinarily, Reader users can’t save filled-in copies of forms that they complete. However, you can extend rights to Reader users so they have the ability to do so. These extended rights also include the ability to add comments, use the Typewriter tool, and digitally sign the PDF.
   1. Open a single PDF, or select one or more PDFs in a PDF Portfolio.
   2. Choose Advanced > Extend Features In Adobe Reader.
These extended privileges are limited to the current PDF. When you create a different PDF form, you must perform this task again if you want to enable Reader users to save their own filled-in copies of that PDF.
Regards
Steve

Similar Messages

  • How to disable pop up when creating a new document

    I have published this form using InfoPath and whenever I click on New button it first shows me this pop up/ dropdown then it  immediately redirect to the page where I fill the form. Everything is working fine but I want to disable this annoying pop
    up.
    Thanks

    Hello Preetkamal110,
    Do you have multiple content types and do you have the management of content types enabled?
    Btw, this is a nice post on this dialog:
    http://www.sharepointsharon.com/2013/06/sharepoint-2013-and-content-types/
    - Dennis | Netherlands | Blog |
    Twitter

  • How to register the recipient when create job by function

    I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
    Can you tell me how to register the recipient when create the job.
    ( in sm36, it is easily to do but how to do in coding? )
    regards,
    slam

    Hi
    I think in Back ground using the above fun modules you can't send a mail to the receipient.
    see the use of the above fun modules;
      IF p_bjob = 'X'.
        CONCATENATE sy-cprog sy-datum sy-uzeit
                    INTO jobname SEPARATED BY '_'.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = jobname
          IMPORTING
            jobcount         = jobcount
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          IMPORTING
            out_archive_parameters = arc_params
            out_parameters         = print_params
            valid                  = valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF valid = chk.
          SUBMIT ybrep
                          WITH < sel Screen>
                          AND RETURN
                          USER               sy-uname
                          VIA JOB            jobname
                          NUMBER             jobcount
                          TO SAP-SPOOL
                          SPOOL PARAMETERS   print_params
                          ARCHIVE PARAMETERS arc_params
                          WITHOUT SPOOL DYNPRO.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = jobcount
              jobname              = jobname
              strtimmed            = 'X'
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              invalid_target       = 8
              OTHERS               = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            MESSAGE i029 WITH jobname.
          ENDIF.
        ELSE.
          MESSAGE s000 WITH text-003.
          STOP.
        ENDIF.
      ENDIF.
    Reward points if useful
    Regards
    Anji

  • How to disabled mutli desktop when I using Full Screen?

    How to disabled mutli desktop when I using Full Screen?
    Some app have a preferences option to do this which like iTerm2
    In Lion-Style FullScreen windows, I can't use command + tab to  quickly switch between in the apps, I must switch to the  app own desktop which is using fullscreen, It's so trouble. I even think this is a flaw in Apple's design.
    So, How can I have use this  feature in others apps such as Google Chrome, Mail, Safari and so on.
    Please Help me!  Thanks! Thanks! Thanks!

    nobody can help me ?

  • How to disable autostart (application) when managed server restart ?

    Hi Ppl,
    How to disable autostart (application) when managed server restart ?
    I want some of the applications to remain not started. In WebSPhere, we have an option disable auto start for applications.
    I don't find in weblogic.
    Thanks

    Hi,
    I agree with Faisal. When you shutdown your WL server while the application is running, the thing is when you start your server again, it would automatically start the application with it. Now if the application was down when you shutdown the server, it _the application_ won't start with the server.
    So it depends on the application last state, when you start your server.
    Regards,
    Mohab

  • How to disable drill option for one column in the WebI Report

    Hi,
    How to disable drill option in a column in WebI?
    When the Drill option is enabled by default all the column in the report will have that enabled,
    I ahve added Hierarchy in the Custom hierarhcy list in Universe.
    I am using BOXI3.1 WebI Reports.
    But I wanted only the hierarchy column to have that drill option enabled, rest all column should display text data.
    PLease let me know if you have any idea.
    Thanks in advance.
    Regards

    Cretae the variable at the report level (may be with the same definiton) and then use that variable in the table
    to disable the drill. It will be displayed as normal text object.
    Drill functionality is enabled only on the objetcs coming from the universe.
    Regards,
    Rohit
    Edited by: rohit12 on Mar 11, 2010 10:12 AM

  • Can't find 1:1.85 aspect option when creating Project

    Can't find 1:1.85 aspect option when creating Project.
    I have files shot on Canon C300 in 16:9, but we had the 1:1.85 aspect lines on the camera and I can't figure out how to incorporate those frame lines for editing.
    Is the best way to do it when creating the project? Or is the best way to edit the files in 16:9 and mask the final product?
    Thanks,

    http://www.panavision.com/
    http://www.panavision.com/learn
    http://www.panavision.com/2-perf-explained
    and finally...
    http://www.panavision.com/sites/default/files/docs/documentLibrary/FormatSpecs2010.pdf
    it's PANY

  • How to disable delete option in the receipt work bench thorugh formpersonal

    Hi Team,
    Please let me know, how to disable delete option in the receipt work bench through form personalization

    Hi.
    Condition
    Trigger Event: WHEN-NEW-ITEM-INSTANCE
    Trigger Object: RGW_FOLDER.M_PAYMENT_METHOD_DSP
    Actions
    Type: Property
    Object Type: Block
    Target Object: RGW_FOLDER
    Property Name: DELETE_ALLOWED
    Value: FALSE
    Note: The button will remain visible and if the user presses it, the system will ask if he/she want to delete the receipt. However, if the OK button is pressed the receipt will not be deleted and a message will be shown ("You cannot cannot delete this record")
    Hope this helps.
    Octavio

  • How to trigger email notification when users fail to reset your password in fim 2010 r2.

    Hi,
    how to trigger email notification when users fail to reset  your password in fim 2010 r2
    Regards
    Anil Kumar

    Hi Sylvain,
    I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
    check Advance View of Set this gives
    <Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
    xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
    But this is not working for me so please tell me where i am wrong.
    Regards
    Anil Kumar

  • How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

    Hi,
    How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
    Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
    Regards
    Anil Kumar

    Hi Sylvain,
    I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
    check Advance View of Set this gives
    <Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
    xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
    But this is not working for me so please tell me where i am wrong.
    Regards
    Anil Kumar

  • How to add multiple table when creating add on using b1de

    Hi all,
    Plz help me
    How to add multiple table when creating add on using b1de.
    Thanks

    Hi dns_sap,
    Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
    If so, you can use the following code
    Add User Table
            Try
                Dim lRetCode As Long
                Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUDT.TableName = TableName
                oUDT.TableDescription = TableDescription
                oUDT.TableType = TableType
                lRetCode = oUDT.Add
                '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
                oUDT = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Add User Field
    Try
                Dim lRetCode As Long
                Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
                oUDF.TableName = TableName
                oUDF.Name = FieldName
                oUDF.Description = FieldDescription
                oUDF.Type = FieldType
                lRetCode = oUDF.Add
                '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
                oUDF = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Regards,
    Vítor Vieira

  • How to Disable edit option in Logon pad

    Hi,
    How to disable edit option in logon pad
    thanks

    Actually if you are looking to disable the "Edit" option so end users cannot change or modify the existing  Logon Pad options systems, you can.
    What version are you using for SAP GUI?
    7.10 has icons to the right which allow changes. (New, edit, etc)
    7.20 has icons across the toolbar at the top. (pencil, paper, trashcan)
    For both versions, Navigate to C:\Program Files\SAP\FrontEnd\SAPgui (Default location)
    In there you will find 2 executeables:
    saplgpad.exe
    saplogon.exe
    If you run the saplogon.exe it will allow edit, delete and modify
    If you run the saplgpad.exe:
    On the 7.10 version the buttons are gone.
    On the 7.20 version, the buttons are grayed out.
    Hope this is what you are looking for.
    Regards,
    Zecher

  • How to disable Internet Options using Group Policy Object?

    Dear everybody,
    Please tell me about how to disable Internet Options via group policy to Internet Options on Tool menu, Internet Options on Control Panel and Command control inetcpl.cpl?
    kea

    Hi,
    The location of this GPO in Windows Server 2008 should be:
    User Configuration\Administrative
    Templates\Windows Components\Internet Explorer\Browser menus
    Enable the Group Policy “Tools
    menu: Disable Internet Options… menu option”
    Hope that helps.
    Regards,
    Leo   Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • "Error When Creating the form" in "Salary Statement"-Benefits and Payments

    hi
    When I enter the option "Salary Statement" (in "Benefits and Payment")  shows me the error "Error When Creating the form"
    http://img571.imageshack.us/img571/9986/payroll1.jpg (in "Salary Statement")
    http://img153.imageshack.us/img153/3007/payroll2.jpg  (My Error -  "Error When Creating the form")
    but, my sap system has Payroll customized, check it entered this tcode RPCEDTE0 I also put the appropriate values to obtain a good result.
    http://img716.imageshack.us/img716/2544/payroll5.jpg (screen RPCEDTE0)
    http://img541.imageshack.us/img541/1593/payroll6.jpg (result RPCEDTE0, Remuneration Statement correctly)
    What I must customize addition to Payroll(back-end) to run this option of "Salary Statement"?
    I hope for posts and helps,
    Ivan

    hi Sandip
    I clear the temporary files, but the error persist.
    I think so,  my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
    thanks for your post and helps,
    Ivan

  • Error when creating the form in Salary Statement of ESS

    Dear All,
    We are implementing ESS and MSS,
    when i try to select ESS>Benfits and Payment>Salary statement, it shows the error as <b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form</b>.
    We have configured ADS in our ERP system as per the ADS config guide.
    Landscape is, NW04s ,ECC5.0 integration, corresponding ESS and MSS versions.
    <u><i>Complete Error is:</i></u><b>com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:495)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:366)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:454)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:350)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:264)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:243)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:196)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:256)
         at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:217)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:238)
         at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:466)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:354)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:179)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)</b>
    your input will be appreciated,
    please do the needful.
    Regards,
    Sireesha.

    hi Sandip
    I clear the temporary files, but the error persist.
    I think so,  my error is because otherwise customizing the salary statement is seen in ERP (Back-End) but I can not see through the sap portal (Error: Salary Statement http://img153.imageshack.us/img153/3007/payroll2.jpg)
    thanks for your post and helps,
    Ivan

Maybe you are looking for