How to disable pop up when creating a new document

I have published this form using InfoPath and whenever I click on New button it first shows me this pop up/ dropdown then it  immediately redirect to the page where I fill the form. Everything is working fine but I want to disable this annoying pop
up.
Thanks

Hello Preetkamal110,
Do you have multiple content types and do you have the management of content types enabled?
Btw, this is a nice post on this dialog:
http://www.sharepointsharon.com/2013/06/sharepoint-2013-and-content-types/
- Dennis | Netherlands | Blog |
Twitter

Similar Messages

  • How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.

    For my part you are welcome, sdowers.
    Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
    I just came to remember a warning that needs to be given:
    The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25.

  • How to fill the tables faglflexa and faglflext when creating a new document

    Hello all,
    I need to modify the field faglflexa-RMVCT when creating a new FI document , actually i'm using the transaction ABUMN,
    i tried to use manu user-exit to change this table unfortunately , I have not changed this entry .
    Could you please help me to find a solution for this problem?
    Thank you in advance,

    When you are defining the elements of the datatype there are columns where you can do what you need:
    <b>column type</b>: here you choose the type of data of the element
    it can be a standard type or a user defined one (if you click one time only it should appear an icon in the right for input help: click there and choose the type you need)
    <b>column occurence </b>: in a similar way of column type here you define the cardinality of the element (min occurence and max occurence)
    setting min occurrence: 1, max occurrence 1 or unbounded --> required
            mmin occurrence 0, max occurrence 0, 1 or unbounded --> optional
    about the attributes there are directly the choice between required or optional.
    <b> column details </b>: here you define the length of the  element if it is a string or a lot of other things if the type is a different one.
    I hope this will help you

  • User getting error when creating a new Document Library

    The user is getting the following error when trying to create a new Document Library in SharePoint 2010:
    Error
    Cannot complete this action.
    Please try again.
    Correlation ID: 37ecd5eb-6129-4fa3-84bd-c6f0ad8115d5
    Has anyone come across this error and know how to resolve it?

    Hi,
    According to your post, my understanding is that the user could not create a document library.
    To narrow down whether the issue is related to the user permission, you can check which permission the user has.
    You can also assign the user full control to check whether it works.
    What’s more, did the issue occur in other sites? You can check with other sites or create a new site to check whether it works. Maybe the site has been corrupted.
    To quickly and accurately find the issue, I recommend you can check the event log and ULS log to see if anything unexpected occurred.
    For SharePoint 2010, by default, ULS log is at
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS
    You can check the ULS log by the methods here:
    http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
    http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • When creating a new document, how do I designate an AA  cover master and BB back page master?

    I am starting a new document with CS-5 that is a pamphlet with different header and footers on the cover page, back page and internal pages. How do I designate the AA cover page, BB back page and internal A Master pages in the page menu?

    After retiring from Sikorsky Aircraft as a design and development engineer for over 42 years, I volunteered to design and edit the Sikorsky Archive
    Newsletters, which we upload to our website at www.Sikorskyarchives.com .
    That is so cool. When I was 13 years old, you had my dream job
    I use this arrangement during the writing phase due to the ease of going from each page in numerical sequence. I can then print a PDF in numerical sequence for editing purposes. However, the printing facilities we use requires a 9 page 5 spread layout so that he can print the 8 page document properly. I cannot figure out how to get an in-line single page PDF for easily editing and correcting from the printing format. Any simple procedure for converting from one format to the other without loosing any of the final data would be most helpful, and sure increase my old brain functioning capability
    Well, usually when InDesign forum regulars hear something like this, they say "Imposition is the printer's job." I don't know if you are printing in-house, or if you're handing this off to a commercial printer. From your phrase "printing facilities we use" I'm guessing that you're printing it yourself. The way that I'd do this if I was going to print the booklet myself is: I'd design in "reading order" (1, 2, 3, 4... 8) and then use File -> Print Booklet to make a PDF that was set up correctly to be printed & folded with correct pagination (1, 8, 2, 7...). The output you get from Print Booklet is PDF only, so you keep your editable InDesign document in reading order, but your PDF is set up in booklet-printing order. (You can always export a PDF from InDesign if you want a PDF in reading order.)
    There are other solutions if you need more flexibility, but this is the solution that leapt out at me.

  • How to update purchase order when creating a new condition records

    Hi,
      We have the system configured so that whenever we update a condition record, a change pointer is generated. Then we the use of standard reports RMEBEIN4 and RMEBEIN, all open purchase order having that condition type is updated. However this only works when we update existing condition record. When we create a new condition record, this does not work even though the change pointer is created. Do the reports mentionned above works for the this case or another standard report that should be trigger.
    Thank you for your help

    hi,
    May be this is working for the conditions already existing in the info record for the PO's.  so when you have new condition record it updates only after you amend the PO with that condition and save it.
    Kiran

  • Illustrator CC - CRASHES when creating/opening new document.

    My Illustrator CC crashes when:
    - when I open any *.ai file saved on my disk
    - when I try to create new file
    I can open the Illustrator (blank, without any document) but as soon as I want to open some document or create (File/New) it crashes immediatelly wit "Illustrator stopped responding" and it closes.
    I tried to reinstall it but it didnt help.
    I have brand new (got it for 10 days)  PC with Windows 8.1
    Yesterday Illustrator worked without a problem. Today it just can not run.
    Please help. Thank you

    Pablo,
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • SharePoint 2013 Document Library template displays html code when creating a new document from a sharepoint list multiline rich text

    I have a 2010 work flow that is associated with a sharepoint 2013 list that creates a new list document using a custom Microsoft Word 2013 template with a rich text multiline field quick part.  The workflow creates the document and populates
    the the quickpart, however, the text in the document is showing html codes
    <div class="ExternalClass2116495984EB429D95B02CC15F85FD4C"><h1>ABC123</h1><h2>Test&#58; 1234</h2></div>
    and not as 
    ABC123
    Test: 1234
    Is there a no code solution for this?

    Hi,
    I have done a test and I can reproduced your issue.
    I referred to the blog about Automatically create Word documents which include list fields:
    http://blogs.technet.com/b/brenclarke/archive/2009/04/15/automatically-create-word-documents-which-include-list-fields.aspx
    When I create a multiple line of text column in a list, I just choose Plain text, Then I solved the issue:
    Besides, here is a similar post, you can take a look at:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/a7ab3a61-6643-4a47-a464-fe46b5db1558/rich-text-field-showing-html-code
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • How to disable email option when creating a form

    I am creating a pdf flyer in either Pro or LiveCycle. And I want to provie a space for people to enter their personal information (form fields).
    I want them to be able to save this and print it. I don't want to give them a submit option (to send via email). (So I will be "distributing" the form - and I can't Distribute without providing an email.)
    I know I can remove the Submit button from the form, but even when there is no Submit Button, when you open the form in READER (which most will be using), Reader itself provides an option to Submit form.  How do I prevent this??
    Or, is there any way to create a fillable form that will allow others to save without "distributing" the form? I am thinking the "distributing" is what is causing the email to be linked to the form.
    I hope I have explained this well. Any direction would be appreciated.
    Thanks!

    You have a point, if your users are filling the form in with Reader, they won't be able to save the data with the form unless the form has been "Reader Extended" (which enables this functionality in Reader for the particular form)
    If you have Acrobat Pro, you can "extend" the form before you send it to the users.  The following is from the Acrobat Pro help...
    Enable Reader users to save form data
    Ordinarily, Reader users can’t save filled-in copies of forms that they complete. However, you can extend rights to Reader users so they have the ability to do so. These extended rights also include the ability to add comments, use the Typewriter tool, and digitally sign the PDF.
       1. Open a single PDF, or select one or more PDFs in a PDF Portfolio.
       2. Choose Advanced > Extend Features In Adobe Reader.
    These extended privileges are limited to the current PDF. When you create a different PDF form, you must perform this task again if you want to enable Reader users to save their own filled-in copies of that PDF.
    Regards
    Steve

  • How to disable adresses dropdown when writing a new?

    I do not want my earlier adresses to dropdown when I start writing a new one.

    * Firefox (Tools) > Options > Privacy > Location Bar: When using the location bar, suggest: Nothing
    * https://support.mozilla.com/kb/Location+bar+autocomplete

  • "this is not a valid PDF file" message when creating a new document?

    Every time i try and open a new document I get a message that says this is not a valid PDF file?
    Has anyone else recieved this message?

    Sorry, I am out of ideas. Unless anyone else can help I suggest you need to contact support directly. It’s usually possible to start a live chat, if an Adobe agent is free, and often to get problems fixed right away.
    To get help now click here for product support

  • How to register the recipient when create job by function

    I am now use JOB_OPEN , JOB_SUBMIT and JOB_CLOSE to create a job in the program. And need to post the result of the report to the person by email.
    Can you tell me how to register the recipient when create the job.
    ( in sm36, it is easily to do but how to do in coding? )
    regards,
    slam

    Hi
    I think in Back ground using the above fun modules you can't send a mail to the receipient.
    see the use of the above fun modules;
      IF p_bjob = 'X'.
        CONCATENATE sy-cprog sy-datum sy-uzeit
                    INTO jobname SEPARATED BY '_'.
        CALL FUNCTION 'JOB_OPEN'
          EXPORTING
            jobname          = jobname
          IMPORTING
            jobcount         = jobcount
          EXCEPTIONS
            cant_create_job  = 1
            invalid_job_data = 2
            jobname_missing  = 3
            OTHERS           = 4.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          IMPORTING
            out_archive_parameters = arc_params
            out_parameters         = print_params
            valid                  = valid
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF valid = chk.
          SUBMIT ybrep
                          WITH < sel Screen>
                          AND RETURN
                          USER               sy-uname
                          VIA JOB            jobname
                          NUMBER             jobcount
                          TO SAP-SPOOL
                          SPOOL PARAMETERS   print_params
                          ARCHIVE PARAMETERS arc_params
                          WITHOUT SPOOL DYNPRO.
          CALL FUNCTION 'JOB_CLOSE'
            EXPORTING
              jobcount             = jobcount
              jobname              = jobname
              strtimmed            = 'X'
            EXCEPTIONS
              cant_start_immediate = 1
              invalid_startdate    = 2
              jobname_missing      = 3
              job_close_failed     = 4
              job_nosteps          = 5
              job_notex            = 6
              lock_failed          = 7
              invalid_target       = 8
              OTHERS               = 9.
          IF sy-subrc <> 0.
           MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
          ELSE.
            MESSAGE i029 WITH jobname.
          ENDIF.
        ELSE.
          MESSAGE s000 WITH text-003.
          STOP.
        ENDIF.
      ENDIF.
    Reward points if useful
    Regards
    Anji

  • How To Add Additional Fields When Creating New Contact From w/in Mac Mail?

    Hi there. When in Mac Mail and clicking on contact information provided within an email, we are able to either (1) CREATE NEW CONTACT or (2) ADD TO EXISTING CONTACT (by clicking on the arrow next to a phone number, address, etc.). If I choose "Create New Contact," how can I add additional fields BEFORE clicking on "Add to Address Book" button in lower right corner? Let's say, for example, I know this new contacts URL or company. (Currently, I am creating the new contact from within Mac Mail and then going to Address Book and finding the contact, then editing, the adding the additional fields, then saving, and then going back to Mac Mail. This all takes time.)
    Note: When creating a new iCal event from within Mac Mail, we can click on Option/Alt key when selecting drop-down arrow...and this will allow us to add additional information. The same feature isn't available for address book???

    I have the exact same question and problem. If there was a way to automatically open the AB entry after "creating new contact" this would solve it.
    Thanks for any suggestion

  • When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

    Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
    You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
    // Get the icon from the b3 button
    var oIcon = getField("b3").buttonGetIcon();
    // Get  reference to the b0 button
    var f = getField("b0");
    // Set the icon of the b0 button to the icon retrieved from the hidden button
    f.buttonSetIcon(oIcon);
    // Show the b0 button
    f.display = display.visible;
    This code would go in the Mouse Up event of the smaller button.

  • How do you shuffle the image order when creating a new slideshow in apterture 3?  i would like to do this automatically when creating a new slideshow.  i see how you do it when you just play a slideshow.

    how do you shuffle the image order when creating a new slideshow in apterture 3?  i would like to do this automatically when creating a new slideshow.  i see how you do it with presets when you just play a slideshow, but i don't see an option to randomly shuffle the slide order when you create a new slideshow.  i know you can sort it by different fields, but i want it to be random.  thanks.

    If you want to rearrange images in random order you can try an AppleScript:
    retrieve a list of selected images from Aperture
    shuffe the list properly
    create an album in Aperture and add the images from the list to the album (make sure that the album set to be orederd manually)
    Here  is a sample script that shuffles the selected images and displays them in random order in Full Screen Mode:
    on removeItem(ims, i)
      -- remove the item at position "i" from a list ims
              if ims is {} then return {}
              if (length of ims is 1) then return {}
              if i < 2 then return rest of ims
              if (i = length of ims) then return (items 1 thru (i - 1) of ims)
              if i > (length of ims) then return ims -- should be error?
              return (items 1 thru (i - 1) of ims) & (items (i + 1) thru (length of ims) of ims)
    end removeItem
    on shuffle_items(ims)
      -- shuffle the items of the list "ims" randomly
              local numitems, ims_shuffled, nextrest, nextpick, i
              set numitems to length of ims
              if length of ims < 2 then return ims
              set ims_shuffled to {}
              set nextrest to ims
              repeat until nextrest is {}
                        set i to (random number (numitems - 1)) + 1
                        set nextpick to item i of nextrest
                        set beginning of ims_shuffled to nextpick
                        set numitems to numitems - 1
                        set nextrest to removeItem(nextrest, i)
              end repeat
              return ims_shuffled
    end shuffle_items
    on shuffleIms()
      -- retrieve the selected images from Aperture
      -- and display them in random order in full screen mode
              local imageSel, shuffled, i
              tell application "Aperture"
      activate
                        set imageSel to (get selection)
                        set shuffled to my shuffle_items(imageSel)
                        set fullscreen to true
                        if imageSel is {} then error "Please select some images."
                        repeat with i from 1 to count of shuffled
                                  reveal {item i of shuffled}
      delay 3 -- chnage that to the time you want
                        end repeat
                        set fullscreen to false
                        return shuffled
              end tell
    end shuffleIms
    shuffleIms()
    Some more code snippets to go from here:
    To create an album:
                        tell library 1
                                  if not (exists album "shuffledAlbum") then
      make new album with properties {name:"shuffledAlbum", image version:shuffled}
                                  end if
                        end tell
    And to add the images from the shuffled list to the album:
                        repeat with i from 1 to count of shuffled
                                  duplicate item i of shuffled to album "shuffledAlbum"
                        end repeat
    Regards
    Léonie

Maybe you are looking for