How to disable inode-based ETag generation in WebLogic?

Hello,
Can you please suggest me how to do the subject?
Thank you before hand!
M

Hello Puneeth ,
Thank you for your reply.
What do you mean by OHS?
I have WebLogic 10.3.6 installed with OFM 11.1.1.6 and yes, inside WebLogic console, under the WebTier I have an ias-component=ohs1.
Is this what you are referring to?
I have tried to locate http.conf file to no avail. Seems like's it is an Apache config file, but the client doesn't use Apache, so I am at a loss here.
Thansk,
M

Similar Messages

How to disable Buttons based on condition.

Hi
Need your help to disable button based on condition.
Please refer the application:
http://apex.oracle.com/pls/otn/f?p=34797:5:110582943383419::NO:::
login credentials:
workspace: vsanthanam
user: vijay
pswd: apex_demo
In the above application, i have 2 buttons in page 5, (Report1 and Report2)
Where i have to disable button based on the following conditon:
i) USER whoever has Admin value 'Y' in my table can access the button.
for this i've written a Button Condition : Type (EXISTS)
select 1 from apex_extra_values where rtrim(lower(empname)) like decode((select Admin from apex_extra_values
where rtrim(lower(empname))=rtrim(lower(V('APP_USER')))),'Y',rtrim(lower(V('APP_USER'))))
note: i have empname same as my APEx user name. with Admin access 'Y'.
By using this code i can able to hide the button for users who has no Admin access.
But my requirement is : i have to show the button even if the user is not Admin, but to grey out (disable the button - no action)
I tried using javascript function:
function disableButton(pThis)
pThis.disabled=true;
But either of this (exists condtion or JAvascript function) works in my case and not both.
Any pointer on this would be highlt appreciated.
Thanks
Vijay

Couple of things:
1. I would never use v('APP_ITEM') but :APP_ITEM - it is faster and there is no need to use this function within an application
2. The way you are doing this check is not the best approach. You should create an authorization schema and run this once per session. Whatever this authorization is returning as a result you can check using the following Function returning boolean:
IF apex_util.public_check_authorization ('MY_AUTH') THEN RETURN TRUE; ELSE RETURN FALSE; END IF;
See this example on authorization issues:
http://apex.oracle.com/pls/otn/f?p=31517:148
3. As far as disabling a button is concerned I think I explained the options. I also have an example on that here:
http://apex.oracle.com/pls/otn/f?p=31517:143
whereby it is not disabling but hiding a button.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to disable domain based and normal cookies in e-tester 8.3?

Hi all,
Is there any way to disable domain based and normal cookies in e-tester 8.3 verson ?
thanks
Edited by: USoni on Jan 28, 2009 11:23 PM

What do you mean by disable?
there are setting available which affects Cookies in Script Setting - Script - Automatic Actions

How to disable field based on the selected value

Hi everyone,
I have "employee" table,
it contains the following field,
emp_name
emp_designation
Category
YearsHere the "category" is the select list value which has the following values in select list,
Fresher
Experienced,
when the value :Fresher" is selected for "category" then the "Years" field should be disabled.
I tried the following dynamic action ,
Name:Disable_year
sequence:20
Event:Change
Selection Type:Item
Item(s):Category
Condition:equal to
value:Fresher
Fire When Event Result Is:TRUE
selection type:P1_YEARBut it doesnt work.
can anyone give alternate solution?
Thank you.
Regards,
gurujothi

Name:Disable_year
sequence:20
Event:Change
Selection Type:Item
Item(s):Category
Condition:equal to
value:FresherTry return value instead of this display value(Fresher) of select list
Fire When Event Result Is:TRUE
selection type:P1_YEARIn your above dynamic action, where is the disable action?

Disabling certificate-based login

Hello all,
does anybody know how to disable certificate-based login in SSL sessions? We are running iMS 5.2.1.
My webmail server should run on HTTPS but only accept password-based logins. Our users don't have certificates so certificate-based login is not needed. When I connect to webmail with Netscape Communicator 4.8 I get annoying message "No user certificate ... you do not have a Personal Certificate to authenticate yourself. The site may choose not to give you access without one."
Thanks, Vito

Yes it does.
I tried this.
Apparently, the server doesn't need to trust its own
certificate's CA
But remember that your clients MUST trust
your CA in order to avoid the popup window saying
that the certificate advertised by your server belongs to
an untrusted Certificate Authority
(add the CA's certificate to their personal database)
Good luck,
VIncent MAZARD

Resetting a disabled iPod Touch 5th generation through recovery mode not working.

I bought a disabled iPod Touch 5th generation at a garage sale. I looked up how to reset it and followed every step given and it was working. It said there were about 82 minutes and it was restoring for about until 70 minutes and then a pop-up comes up saying it can't restore it because it has a password on it! Please help me.

Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
- Then try on another computer

How to Disable CheckBox for a Particular Condition

Hi All,
In my application, iam using one table having 5rows , with checkboxes,
based on one condition i want to make few checkboxes as default disable in the same table, and some checkboxes i shud make it as enable, so experts please help me how to disable some checkboxes.
disable means even if we select it shud not get selected, like that is it possible,

Hi Sushma,
You can have one more attribute in the same node from where you are populating the table and bind this boolean attribute to the enabled property of your CheckBox.
and by looping thriugh the table you can check for conditions and based on it set the Enability of the checkbox.
for (int iRowsCount =0;iRowsCount < wdContext.node<name>().size();iRowsCount++)
if (condition)
// Disabling the Checkbox based on the condition
wdContext.node<name>().get<name>ElementAt(iRowsCount).set<BooleanAttributeName>(false);
Hope this helps!!
Cheers,
Arafat

How to disable hold button in purchase order creation.

hi
how to disable hold button in purchase order creation.

Select single * from VBAK where clause
---It fetches single record from the database, based on the condition you specified in the where clause.
Where as select * from VBAK up to 1 row
---Fetches first record if the condition specified in the where clause is satisfied, otherwise it doesn't fetch any record

How to disable CHARGES tab in Find Sevice Requests(CSXSRISR.fmb / CSXSRISV)

could any one please let me know how to disable CHARGES tab in Find Sevice Requests ( CSXSRISR.fmb, but funtion registered is CSXSRISV).
Actually when i access the "Create Service Requests" menu option, the form comes up with a the three TABS (Charges , Work Orders & Maint Req) visible but disabled. But when i access the same from "Find Service Request" menu option, i get the Charges TAB enabled but not the other two... so i would need to visibilly disable the CHARGES TAB like the other two tabs.
I checked the subfunctions but i could not find any.... i could only find Update Charge and Create Charge options but not the Visible option.

Hi...
The Charge Tab in SR form gets enabled only after SR No. Generation.
So initially when you open the Service Request form the Charges Tab will be visible but disabled, & once the SR number is generated the same gets enabled.

How to disable CHARGES tab in Find Sevice Request ( CSXSRISR.fmb ).

could any one please let me know how to disable CHARGES tab in Find Sevice Requests ( CSXSRISR.fmb, but funtion registered is CSXSRISV).
Actually when i access the "Create Service Requests" menu option, the form comes up with a the three TABS (Charges , Work Orders & Maint Req) visible but disabled. But when i access the same from "Find Service Request" menu option, i get the Charges TAB enabled but not the other two... so i would need to visibilly disable the CHARGES TAB like the other two tabs.
I checked the subfunctions but i could not find any.... i could only find Update Charge and Create Charge options but not the Visible option.

Hi...
The Charge Tab in SR form gets enabled only after SR No. Generation.
So initially when you open the Service Request form the Charges Tab will be visible but disabled, & once the SR number is generated the same gets enabled.

AMFPHP and AS3FLEXDB - how to disable 'busy indicator' during query execution ?

I'm doing some experiments with Flex and SQL with use of as3flexdb and AMFPHP.
I've written some application which is pushing some data to SQL base...
problem is, that durring query execution, there is some 'busy indicator' on the screen
- some circle, and word 'loading'.
Have you any idea how to disable this ?
Everything what I'm doing is based on this tutorial below, but there is no idea in it how to
disable the indicator.
http://ghalex.com/blog/tag/as3flexdb
I'm not sure if this indicator comes from as3flexdb libraries or AMFPHP itself ?
Has anyone of you had such problem before ??
Thanks for all ideas
Rymas,

Unfortunatelly my cheers was to early
I've successfully decompiled the library swc file, found Query.as class and corrected things mentioned in this
post : http://itutorials.ro/viewtopic.php?f=9&t=22&p=59&hilit=loading#p59
... but I cannot compile the library.fla back to swf ... it's generating some errors
Could anyone help me with that, maybe you've got more expirience with decompiling and compiling.
Orginal .swc file is here : http://www.rymasek.iq.pl/swc/as3flexdb_1.3.0.swc
Thanks for help !!

How to disable "View Report" button in reporting services

Is anyone know how to disable "View Report" button in reporting services, I know can do custom code in report properties, what is the code? I have tried something like this ***button1.enable=false, but it can not success.
Appreciate if anyone can reply me, thanks.

Hi,
The message box don't work on the web because it is of windowform box. Based on your further description, you might want to do the date parameter validation. If so, there is common way to do this:(assume the date parameter value inputed can't be less than 2007)
1) Intert a textbox and input the message used to show the end users if they input a invalidated date value for the parameter, and then set the textbox's hidden property to =iif(Year(Parameters!myPrameter.value) < 2007,false, true)
2) Insert a Rectangle control below the textbox created in step 1, and put all report items in it and set the Rectangle's hidden property to =IIF(Year(Parameters!myParameter.value)<2007,true,false)
After these, if the end users input the date value can meet the project requirement, the report will show the data the end users want, otherwise, the end users will see the error textbox to tell them the parameter value is incorrect.
Hope this help,
thanks,
Jerry

How to disable File Browse... item including browse button

Hi All,
How to disable file File Browse... item including browse button based on Apex Item Value.
thanks,
nr

Hello Trent,
>> Does the read only attribute in 4.0+ of the page item not suffice?
It all depends on your actual scenario.
If the show/hide condition is known pre-rendering, you can use the Application Builder ReadOnly attribute. In this case, the APEX engine actually creates a simple text display so the input field and the browse button will not be displayed at all (and not just grayed out). However, if you need to toggle the status of the item, like in the example, or the status depends on a user input, using the disable attribute is much simpler (If you start with ReadOnly item, you will have to create the file browse item yourself, using JavaScript, or submit/re-direct the page so it will be rendered with the file browse item).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

How to disable (grey out) button in report

Hi,
Can any one; pls help how to disable button (grey out) on some specific condition.
I have a report of 2 pages; In first page it displays few records; once click on specific record control goes to next page 2; And here i have button (template based button); Once click on this it perform pl/sql procedure.
My requirement is: The button should disable (should not hide) when moves from page 1 to page 2 based on some specific returned values in page 2.
I have return code in button conditions (Condition type = PL/SQL Function Body Returning a Boolean)
Sample code is:
if :value1 = 'disable_test_value' then
return false;
else
return true;
end if;
The above code is working fine with button completely disappers if the :value1 = 'disable_test_value' (which is suppossed to be as we gave return false).
My question is: Is there any way; we can still show button (but button disabled or grey out; so that no action can perform on this button )? And also show some text message in other text field when button is disabled?
Thanks!!
UK

I have an example: http://apex.oracle.com/pls/otn/f?p=27168:1 using theme #2. You need to use a theme that has a "grayed-out" alternate button template.
To accomplish this I:
1) Created one item named P1_VALUE1 to contain the condition as to whether the button should be enable ("enable_test_value") or disabled ("disable_test_value").
2) Created an enable button with a "Button Style" of "Template Based Button" with "Button Template" value of "Button". I had the "Condition" type of "PL/SQL Function Body Returning a Boolean" to be:
if :p1_value1 = 'disable_test_value' then
return false;
else
return true;
end if;I had the "URL Target" to be: javascript:alert('Performing function ...');
3) Create a disabled button with "Button Style" of "Template Based Button" with "Button Template" value of "Button, Alternate 3". I had the "Condition" type of "PL/SQL Function Body Returning a Boolean" to be:
if :p1_value1 != 'disable_test_value' then
return false;
else
return true;
end if;I had the "URL Target" to be: javascript:alert('Performing function ...');
Mike

How can I speed up PDF generation?

I am working on 2 manuals in Frame 10, unstructured. I have installed all the latest FM patches. The smaller manual is 270 pages with 200 graphics inserted by reference. It takes 2.5 hours to "Save as PDF." The larger manual is 500 pages, 250 graphics and takes 3 hours to "Save as PDF".
I have converted graphics to smaller .jpg files. I have freed up as much space on my PC as possible - it has 4GB memory and 300 GB hard drive space available, dual processor with i3 chip. I delete Temp files and reboot before creating PDF.
If I turn off graphics (Esc+v+v), the PDF is created in just a few minutes.
What else can I do to produce a complete PDF with graphics in a reasonable amount of time?

I am a lone writer working on a single PC. No network drives. I open all files in the book before creating PDF.
Many of the graphics are product photos - how to assemble, etc. I was provided with .psd and .jpg versions. Originally inserted the .psd ones, but then consultant advised us to use the .jpg instead. PDF generation is extremely long either way. Also had numerous huge .tif files that I saved to much smaller .jpg.
Manuals will be localized and printed. What type of graphics are advised in this case - for good print quality and efficient PDF generation?
doolie
Date: Thu, 26 Jan 2012 11:33:15 -0700
From: [email protected]
To: [email protected]
Subject: How can I speed up PDF generation?
    Re: How can I speed up PDF generation?
    created by Error7103 in FrameMaker General Discussion - View the full discussion
Are the Frame files and/or the imported objects coming from network servers? If so, you might get a speed up by saving to manual to the local machine prior to printing, and printing to PostScript, where the .ps file is on the local machine. Then Distill separately (if you have the full Acrobat product). Distilling separately* at least frees up Frame for that part of the rendering. I have converted graphics to smaller .jpg files. From what? And I wouldn't have bet that using JPEG would help. The files may be smaller, but they still need to be filtered for export to Ps or PDF, and if they are raster, they may be subject to further processing during PDF generation based on the subsampling specified. You might try sending the objects as EPS (which requires minimal processing into Ps), and you might try making sure that raster images are already at the desired dpi, and require no further downsampling in the rendering flow.

How to disable inode-based ETag generation in WebLogic?

Similar Messages

Maybe you are looking for